*****EDIT*****
I went to stock recovery, cleared cache and user data (something I had already tried) and it magically stopped happening. I'm not sure if that fixed it or something else, but either way it's a non-issue now.)
So I used Odin and the file found here: Flashing back to stock
I'm trying to return the phone to as close to stock as possible so I can sell it. the flash goes great, I get success in Odin, but I keep getting a recurring FC as soon as I unlock the phone after the flash and reboot. it just says "android.process.acore has stopped unexpectedly" and you have the choice to close it. it keeps popping up like every 10 seconds, you click close, and 10 seconds later it's back. I tried to reflash, with no luck. I tried formatting the SD card, with no luck. Any ideas? Unsure what to do next
Related
A little over a week ago I upgraged to a 2.2 ROM on my Epic (DK28.) I was getting all sorts of weird, random issues. Sometimes LauncherPro would force close (almost always after a reboot,) sometimes my wifi would lock up when trying to turn it on (only fixable via reboot...which then caused the aforementioned LauncherPro force close..) and my log viewer would fill up with thousands of errors in just a couple hours...most of them said "AudioDeviceManager" or something like that.
So last night I decided to go back to DI18, and now I'm having worse problems. I flashed it with Odin, and it seemed to be fine at first, but then a little while later I kept getting android.acore.process force closes every five seconds, making my phone completely unusable. I did another reset to DI18 with Odin, and this time it worked fine the rest of the night and into today, although I was still getting thousands of errors an hour in my log...
About an hour ago today, I went to just open my calendar and it force closed every time I tried...so I rebooted, and since that reboot I have gone back to having android.acore.process force closes every three to five seconds. I have rebooted several times, pulled the battery and left it out for a while before rebooting, rebooted without the SD card, every time I get that. I'm at work so I can't try another reset back to DI18, but I'm afraid I'll have the same problems...should I attempt to exchange the phone with Sprint?
I would boot into clockwork and delete dalvik cache and data.
Then I would do ODIN again.
Then I would re-root with clockwork and wipe again X3
Good luck!
brian_hoffman said:
I would boot into clockwork and delete dalvik cache and data.
Then I would do ODIN again.
Then I would re-root with clockwork and wipe again X3
Good luck!
Click to expand...
Click to collapse
No, he shouldn't have to do any of that, cuz Odin will overwrite everything on the phone. Try downloading the DI18 Md5 tar file again and re-flashing..
On another note, you got this thead in the wrong section. It should be in "General" or "Questions"...
VIPERrom [TRiNiTY] 3.0.3 DK28 FroYo by XDA's "BThomas22x" and "Viper Team"
sniperkill said:
No, he shouldn't have to do any of that, cuz Odin will overwrite everything on the phone. Try downloading the DI18 Md5 tar file again and re-flashing..
On another note, you got this thead in the wrong section. It should be in "General" or "Questions"...
Click to expand...
Click to collapse
Sorry about the wrong section, didn't realize.
I'll re-download DI18...I flashed this exact file before though and didn't have problems with it the first time around.
I have great copy of the DI18 file that works fine for me whenever I flash back if you're still looking for it. I can pm you the link.
Hi guys
So I installed Nero v3 on my Vibrant, and all is well. I followed the steps on the Nero thread. I like it very much.
Then I decided to flash my gf's phone. It seemed to go well at first, but then some odd stuff started happening. First, I can't open the "Settings" menu - nothing happens. Second, lots of stuff force-closes all the time.
Those two are minor issues, though. Somewhere between 5-15 minutes after flashing, the entire GUI will force close. The phone will vibrate, then the Team Whisky logo will appear again (as if rebooting), and the GUI will appear and begin the regular startup procedure. It will get as far as "Preparing internal SD card" before the GUI will crash again. This cycle continues indefinitely. Once it has begun, not even pulling the battery and rebooting it will solve the problem.
Any advice?
My plan is to find a way to back up the SD card data and format it, since it always crashes on "Preparing internal SD card." However, I doubt this will help, since the other issues (constant force-closes) don't seem to have anything to do with that.
stoanhart said:
Hi guys
So I installed Nero v3 on my Vibrant, and all is well. I followed the steps on the Nero thread. I like it very much.
Then I decided to flash my gf's phone. It seemed to go well at first, but then some odd stuff started happening. First, I can't open the "Settings" menu - nothing happens. Second, lots of stuff force-closes all the time.
Those two are minor issues, though. Somewhere between 5-15 minutes after flashing, the entire GUI will force close. The phone will vibrate, then the Team Whisky logo will appear again (as if rebooting), and the GUI will appear and begin the regular startup procedure. It will get as far as "Preparing internal SD card" before the GUI will crash again. This cycle continues indefinitely. Once it has begun, not even pulling the battery and rebooting it will solve the problem.
Any advice?
My plan is to find a way to back up the SD card data and format it, since it always crashes on "Preparing internal SD card." However, I doubt this will help, since the other issues (constant force-closes) don't seem to have anything to do with that.
Click to expand...
Click to collapse
Was her phone stock before you started tinkering with it?
In any case I'd suggest re-download nerov3 (to avoid corrupted download issue), ODIN back to JFD (remove the ghosts from the past ROM's) and reflash.
Phone was stock aside from rooting for the purpose of TitaniumBackup. It has never had anything installed on it.
I'm currently Odin flashing back to stock, and I'll give it another shot.
stoanhart said:
Phone was stock aside from rooting for the purpose of TitaniumBackup. It has never had anything installed on it.
I'm currently Odin flashing back to stock, and I'll give it another shot.
Click to expand...
Click to collapse
Good luck!
Well, I did the Odin flash to stock, then installed Nero. After first boot, I left it untouched for 20 minutes or so, and then did a clean reboot. Upon starting up, I was once again stuck in the loop.
Boo
stoanhart said:
Well, I did the Odin flash to stock, then installed Nero. After first boot, I left it untouched for 20 minutes or so, and then did a clean reboot. Upon starting up, I was once again stuck in the loop.
Boo
Click to expand...
Click to collapse
Did you re-download nero? It might be a corrupted download, I haven't seen anyone with the same symptoms.
Does it happen if Voodoo is disabled?
EDIT: Saw that you didn't even have a chance to enable it, hmm, try a different ROM? Axura or Eugene's work.
No, I didn't try re-downloading it. Perhaps I'll give that a try, although it is the same file I flashed onto my phone.
After a bit of time playing with Nero, though, I'm considering going back. The parts that work are slick and wonderful, but it very much feels like beta software. In particular, scrolling lists or web pages is choppy. I've heard this criticism of Android before, but I've never experienced it with the original Vibrant software. It was always so smooth. It makes me think that maybe Samsung was using GPU acceleration in some places. Also, I seem to have some problems with the touchscreen becoming unresponsive, especially in the browser if it's blocked waiting for data (another bug...).
Is it possible to run the JL5 modem on the stock image? That would be great.
Hi
I reflashed my S5 with a stock rom to remove all the Carrier blocks and extras. After the flash the device booted up and instantly came up with the error saying acore has stopped working and then around around 5-10 seconds the phone reboots and does it again. What can I do?
Thanks
Wildey1771 said:
Hi
I reflashed my S5 with a stock rom to remove all the Carrier blocks and extras. After the flash the device booted up and instantly came up with the error saying acore has stopped working and then around around 5-10 seconds the phone reboots and does it again. What can I do?
Thanks
Click to expand...
Click to collapse
Data factory reset in recovery.
Wildey1771 said:
I reflashed my S5 with a stock rom to remove all the Carrier blocks and extras. After the flash the device booted up and instantly came up with the error saying acore has stopped working and then around around 5-10 seconds the phone reboots and does it again. What can I do?
Click to expand...
Click to collapse
It's hard to answer since you provided no crucial details about your phone, configuration or how you flashed it.
You didn't tell us which S5 model you have or your carrier. Nor what firmware file you flashed, so we don't know if it was a compatible file. No Odin log, so we don't know if the flash had errors or not. And you didn't describe how you flashed step by step so we don't know if you missed essential steps.
At a guess, try wiping the partition cache from recovery mode. Then if necessary, do a factory data reset as well (will delete user files!). If you have ongoing problems, then you should restore your backup and try again from that stable condition.
No backup? That is a bad habit to say the least. In that case, flash a full stock firmware image that matches the carrier that the phone was originally sold for.
.
fffft said:
It's hard to answer since you provided no crucial details about your phone, configuration or how you flashed it.
You didn't tell us which S5 model you have or your carrier. Nor what firmware file you flashed, so we don't know if it was a compatible file. No Odin log, so we don't know if the flash had errors or not. And you didn't describe how you flashed step by step so we don't know if you missed essential steps.
At a guess, try wiping the partition cache from recovery mode. Then if necessary, do a factory data reset as well (will delete user files!). If you have ongoing problems, then you should restore your backup and try again from that stable condition.
No backup? That is a bad habit to say the least. In that case, flash a full stock firmware image that matches the carrier that the phone was originally sold for.
.
Click to expand...
Click to collapse
The Model is SM G900F. Its On Three Carrier. I Flashed A STOCK (From SamMobile) Firmware 4.2.2.
The Flash Process Was Successful. No Errors.
Put Device In Download Mode
Connected To Computer
Loaded Firmware Into PDA
Ftime reset
Auto Reboot
Started The Flashing.
Completed.
Phone rebooted. Got Acore has stopped. Then the phone reboots.
But since I needed my phone working quickly I took the path of factory reset and that seems to have fixed it. I did try clearing the cache but no effect.
I believe I know the issue. I used a launcher called Themer. I have reasons to think that was causing the issue because as it was loading in the background I managed to quickly hit the continue button to close the crashed process boxes and as the Launcher finished "Loading" it when it rebooted.
WARNING FOR OTHERS. Always Remove Other Launchers Before Flashing As A Precaution! (Warnings From Newbies Hehe)
So i was simply updating youtube through google play, and messenger through messenger it self and suddenly the phone went into boot loop and can't get it out.
opening recovery mode is hard but when i managed to do it, it simply shows the android icon and installing system updates then restarts again. (tried it ~4 times). thanks to that i can't try clearing cache or any of that stuff on the list that is supposed to appear in recover mode.
trying force restart also does nothing.
trying to remove memory card and sim also didn't work.
i read that flashing HOME_CSC from a rom could fix it but the rom websites i know offer limited sizes and speeds and i don't have a strong internet which ends up timing out, can someone help me out? G935FOJV2ERGE is the one i need.
if you have any other ideas that can help, i would also greatly appreciate it, i really don't want to have to buy a new phone atm, and don't want to lose all my data because i don't used backup services cuz they ate up data .
edit: I am on latest official rom, only used OTA updates, haven't rooted the phone.
edit 2: i managed to get a different region's rom and flashed it's home_csc file, and force restarted it and seems to have worked booted, then it started doing it again just 1 second after that. i didn't even have time to unlock it.
edit 3: managed to get into recovery mode list once, wiping cache didn't work. couldn't get into recovery mode again after that. then i gave up and tried flashing a full rom. still the same problem.
My phone is doing this weird bootloop where it loops 3-4 times, boots up, and starts looping again after 30 or so seconds. So I rooted my phone with Odin and CF Auto Root, and it worked fine. I tinkered around a bit, tried to get my games on my sd card with gl to sd and FolderMount [Root]. I had no success, so I uninstalled them. Everything was fine until then. When I tried to open one of my games(one I didn't tinker around with), I got a pop-up saying something like "reboot to recieve benefits", my phone resetted and started bootlooping. I have no idea what caused it. Everything was working fine until that moment. I've wiped cache, factory resetted(when it boots, I get an error saying the UI is disabled and it reboots). I can't afford Reiboot, and i'm going to try to flash stock firmware/ROM with Odin, but I don't know if it will help.