Hey, I just got a new Atrix and after following all the excellent guides around here I've managed to unlock, root and put cm7 on it. After using cm7 for I while I wanted to try cm9 so I followed Jokersax's instructions and formatted the system, wiped and installed the zip. However, now whenever I go into Rom Manager it tells me SD Card Not Mount. The SD Card needs to be mounted to use Rom Manager. I do not have an external SD card but I was using the internal one with cm7 no problem. I also tried rebooting into recovery and partitioning differently which didn't change it. The issue that bothers me most is that I can't install Swype from the link in my email. I'd really like to be able to use this with cm9 and right now no luck :/ If anyone has any additional help or ideas I would be very appreciative.
First post, woo! Awesome stuff on here everyone, thanks!
Try going to:
[Settings > CyanogenMod settings > Application]
And check the box next to "Use internal storage" and reboot.
peej8991 said:
Hey, I just got a new Atrix and after following all the excellent guides around here I've managed to unlock, root and put cm7 on it. After using cm7 for I while I wanted to try cm9 so I followed Jokersax's instructions and formatted the system, wiped and installed the zip. However, now whenever I go into Rom Manager it tells me SD Card Not Mount. The SD Card needs to be mounted to use Rom Manager. I do not have an external SD card but I was using the internal one with cm7 no problem. I also tried rebooting into recovery and partitioning differently which didn't change it. The issue that bothers me most is that I can't install Swype from the link in my email. I'd really like to be able to use this with cm9 and right now no luck :/ If anyone has any additional help or ideas I would be very appreciative.
First post, woo! Awesome stuff on here everyone, thanks!
Click to expand...
Click to collapse
I did have to do that when using cm7 but I can't find cm settings on cm9. Unless the menus are changed so much that I just can't see it.
My bad, I thought you were using CM7.
peej8991 said:
I did have to do that when using cm7 but I can't find cm settings on cm9. Unless the menus are changed so much that I just can't see it.
Click to expand...
Click to collapse
It's alright, thanks for your help!
Sorry I couldn't help. I haven't tried CM9 yet.
Welcome to the forum!
peej8991 said:
It's alright, thanks for your help!
Click to expand...
Click to collapse
That's alright. Thank you!
Flash this
View attachment fstab_tweak.zip
That worked! Thanks for your help.
Related
For future reference, if I find any bugs with the latest version of cyanogenmod 7, how do I downgrade to a stable version of cyanogenmod 6?
Tonight is a big night for all CyanogenMod 7 user we expecting RC1!!!
Use ROM Manager to install a 2.5.* version of Clockwork Mod (this is the last option in the menu). Then go to Clockwork Mod and either flash a non-CM7 ROM or restore a backup.
Facing similar problem.
My HTC Desire is not detected on my PC & also i am not able to mount the sd card. when i tried using ROM Manager, it doesnt allows any function without sd card mounted.
Please help!!!
Thanks in Advance.
skans03 said:
My HTC Desire is not detected on my PC & also i am not able to mount the sd card. when i tried using ROM Manager, it doesnt allows any function without sd card mounted.
Please help!!!
Thanks in Advance.
Click to expand...
Click to collapse
sounds like youve got a problem with your sd card, try removing and re-inserting it
ghostofcain said:
sounds like youve got a problem with your sd card, try removing and re-inserting it
Click to expand...
Click to collapse
I hav tried dat too. Also with multiple sd cards. none of them mounted.
Flash back to CM6. Just do a full wipe.
Sent from my Desire HD using XDA App
iAltair said:
Flash back to CM6. Just do a full wipe.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Can u please help me with the process to do that.
skans03 said:
Can u please help me with the process to do that.
Click to expand...
Click to collapse
kindly help me with the process to full wipe mt desire , considering that my phone is not detected by my pc & i m not able to get into recovery too...
I have searched diligently and have yet to find specific instruction for creating a bootable SD card for my NC with MIUI Nook Color 1.9.16 (or any version of MIUI for that matter).
I am currently running a fully rooted version of 1.3 on the emmc and "all is well" and I need it left that way so as to continue having access to "in store reading" which I use quite a bit.
Have previously had CM7 and Phiremod running both internally and on an SD card at various times and tried to do a previous version of MIUI on the card using the same process without any luck.
Thanks in advance.
You can use verygreens method here -
http://forum.xda-developers.com/showthread.php?t=1000957
Important part is to rename the miui zip like this -
'How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)'
..and it should work fine
cheers,
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Where are/is "My Apps" as I do not seem to be able to find it.
D/L Netflix and it runs just as it should but the soundlevel at max is quite a bit lower than on rooted 1.3.
Free Koi living wallpaper looks beautiful.
My Apps - strangely there isn't one, but this works nicely -
http://forum.xda-developers.com/showthread.php?t=1154299
Sound level - Download nook tweaks from market and change settings in that
Cheers,
What did you rename the MIUI file? I've tried it a couple different ways and checked the MD5's, but keep getting errors. Unless my SD card has been corrupted somehow (I used it for other SD boots before this, so not too likely), I can't think of anything else causing the problem.
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
PhoenixClaw said:
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
Click to expand...
Click to collapse
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
DizzyDen said:
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
Click to expand...
Click to collapse
What kind of information? My nook color originally had the latest CM7 nightly on the sd card. I followed verygreen's method when I installed that. I used the NC normally. Then, I followed this thread and applied verygreen's method. I downloaded the MIUI rom from the miui thread, renamed it like the cm7 nightly zip ("cm_encore_full-253.zip") and put it in the root of the sd card. I put the sd card back in and booted via recovery. It installed and shut down. I turned it on again, and reached the MIUI globe thing. It was looping and stuck there for 30 minutes.
I've been thinking of trying miui.
If anybody has got.it running from SD please give the step-by-step procedure for the rest of us.
Thanks
A search would show you....
http://forum.xda-developers.com/showthread.php?t=1271982&highlight=Miui+sd
I hate to revive a dead thread, but I have been trying everything I could read or download.
I am using the Size-agnostic installer from this thread: http://forum.xda-developers.com/showthread.php?t=1000957
I am trying to flash MIUI 1.9.16 (MIUI.us_encore_1.9.16_Eng_Deo_ZipA_Signed_andmer) (http://goo-inside.me/miui/encore/)
I successfully installed CM7 to this Sandisk Class4 16gig microSD. Every time I try to flash MIUI, I re-burn the size agnostic card image, copy over the cm7-renamed MIUI ROM, and boot.
The installer seems to work, just like my CM7 installs. Then, when I try to reboot, it goes back to the installer (linux penguin at the top, goes through the motions of trying to flash another rom, when not finding anything, it shuts down).
I know I am missing something simple.
Am I to install CM7, then MIUI on top of it (without reburning the card)? Am I just using an SD-incompatible ROM? For those who were successful, where did you download the ROM from?
I know I have lots of questions, I hope you guys see my effort (that I don't just want someone to give me a quick fix), and I thank you in advance for your help.
Kind regards!
harryzee said:
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Click to expand...
Click to collapse
I'm certainly no expert, but I have flashed two different versions of MiUi to micro SD cards adn then worked fine. You do not need to do i over CM7. Like you, I prepared a clean SD and used the size agnostic procedure. I renamed the MiUi file to some that started with update-cm-
I got my MiUi file here:
http://roms.miui.us/
I used a program called SD Formatter to format the card.. then I used the 1.3 version installer. I sometimes had problems using winimage to create this sd card . You have to select the drive letter for the sd card and then use the "restore" choice on the menu.
David, thanks for your response. I had already wiped it and installed CM7, but when I saw your post, I gave MIUI one last try. I downloaded from that site, and BAM, it installed perfectly! Thanks heaps!
Hi all,
Sorry if the post is misplaced i have a zte v9c and havent found any place else to place the question.
The problem is i cant have access to my sd card, already tried with other cards and it allways says no sd-card.
The only way i managed to solve was restoring an older version of the rom. Im using cm7.
When i go to CW and try to mount sdcard it says no app2sd or something like that.
Cant restore the rom now without the sd card any solution like odin or any other??
Thanks in advance.
Saltao said:
Hi all,
Sorry if the post is misplaced i have a zte v9c and havent found any place else to place the question.
The problem is i cant have access to my sd card, already tried with other cards and it allways says no sd-card.
The only way i managed to solve was restoring an older version of the rom. Im using cm7.
When i go to CW and try to mount sdcard it says no app2sd or something like that.
Cant restore the rom now without the sd card any solution like odin or any other??
Thanks in advance.
Click to expand...
Click to collapse
Try flashing an older version of CW
Hit THANKS if I helped you
Hi,
Sorry for my english maybe i didnt explain correctly.
How can i do it without SD, something like odin? where can i find it and a rom to apply with it..
i never had this problem and i never heard of it but try installing a previous version of cm7 to check if the sd card works like that or you can try to mount the sd card in clockwork mod recovery
Hi,
Yes thats what i want, but how? Cant place rom on sd
Thanks
since it says no app2sd i would guess you need to flash the app2sd script
thats when in clockwork recovery a choose format /sd-ext
it says:
No app2sd card partition found. Skipping format...
How can i flash with pc? no access to any storage on tablet cant do it on device.
I guess it would be like flashing with odin, a pda file or something... any such thing for ztev9?
ok i understand your problem you have no access to the SD Card but i have a solution for you mate flash a rom using windows with ADB http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/ a simple google search will show lots of examples how to flash a rom directly from your pc
EDIT: i use linux and not windows prefer linux over windows any day but if you cant access the sd card use ADB Shell or Fastboot its also available on windows
Thats it.. Thanks ill give it a try.
what rom do you recomend to try this?
on my blade im using the latest cm7 kang which is built by burgerz its available in my cm7 kang development thread mate i found it stable but once wbaw starts releasing his kangs il be using his cm7 kang versions
Kannibalism said:
on my blade im using the latest cm7 kang which is built by burgerz its available in my cm7 kang development thread mate i found it stable but once wbaw starts releasing his kangs il be using his cm7 kang versions
Click to expand...
Click to collapse
u using 13 march??
if so is there any battery drain??
so far i see no battery drain with the rom and i have mobile network 3g connected always
Kannibalism said:
so far i see no battery drain with the rom and i have mobile network 3g connected always
Click to expand...
Click to collapse
so how long does it go on a single charge
like every other CM7 rom i use 24hrs because of the heavy phone usage from my side due to work, emails and my GF playing games lol
I have been flashing CM7 onto a SD card and booting it from there since I got it when they first came out. With that being said, I have no idea what I initially loaded on the card to get it to boot but it has worked great all this time.
Since CM7 is not really updating and I like to keep up to date, can someone please tell me in very easy, step-by-step instructions or a place where it is how to change from what I have now to get to Mirage's Kang build?
I need to know what all needs to be changed on the SD card and also how to keep all my apps, etc. without having to re-install everything.
Thank you so much!
lou-ser said:
... Since CM7 is not really updating and I like to keep up to date, can someone please tell me in very easy, step-by-step instructions or a place where it is how to change from what I have now to get to Mirage's Kang build?...
Click to expand...
Click to collapse
Quick and dirty Kang. See my sig.
I usually to a Ti:backup of all apps+system data then copy the file over to the PC before dropping the ROM on the card for the update. I've never had a case where the apps weren't preserved on the upgrade, but in case they aren't you have another copy. To restore it, re-install Ti:backup, drop the backup file onto the nook and point Ti:backup to restore from the file.
Thanks
Thank you both for the help!!!
Hey guys. I have a problem with my HD2 Device. My first android rom was NexusHD2 Beta1 like 4 months ago. It worked and i had no problems but i decided to install Miui instead of ICS. The Miui rom was really fast and smooth and didnt crash. Now i wanted to get back to ICS with HWA (http://forum.xda-developers.com/showthread.php?t=1434860).
I did a clean installation but the rom crashes randomly like within 2 minutes. I have no clue why it crashes i will tell you know how i installed it and maybe i forgot something and you can tell me what i did wrong.
I used HD2 Nand Toolkit and used Task29 at first. Then i installed MAGLDR and recovery with 200mb and 5mb cache. Then i opened CWM and installed the Rom. After that i installed Darktremor A2SD like it is said in this FAQ:
http://forum.xda-developers.com/wik..._CM9_FAQ#How_shall_I_install_these_scripts.3F
I hope my english is not too bad and you can help me to figure out why my phone crashes .
I took a look at the ROM and the Apps2SD in the XDA Wiki. Are you sure you followed all the directions in the installation instructions of the ROM. You may need to delete the Android folder from your SD card as it does say the following in the ROM thread OP.
tytung said:
Wipe Data/Factory Reset while doing a fresh install. (Optional: also delete /sdcard/Android folder or format your SD card if you have any strange issue.)
Click to expand...
Click to collapse
Also in the Wiki it says you have to format your SD card. So you may need to format your SD card also.
Yeah could be a problem but i even tried it without A2SD and it still crashed :s
btw thank you for your response!
Vassilis.94 said:
Yeah could be a problem but i even tried it without A2SD and it still crashed :s
btw thank you for your response!
Click to expand...
Click to collapse
If it still crashes without the Apps2SD then delete the Adroid folder from your SD card. I went back and edited my first post a little so you may have misssed me mentioning that.
Oh god it seemes that it works now! Its - like everytime - that simple but you Sir are my hero! :'D im really thankful ..