[HOW TO] *New Instructions* Add Amazon VOD to Android Phone - Kindle Fire General

*NEW INSTRUCTIONS*
Today I figured out how to get Amazon Video On Demand app on my phone and watch videos
I did this with a rooted phone, I am not sure if you phone needs to be rooted to accomplish this task. I have attached the required files to accomplish this task. These steps are assuming you have a rooted phone.
REQUIREMENTS:
Download attached APKs
Wireless connectivity
VooDoo OTA for rooted phones (https://market.android.com/details?id=org.projectvoodoo.otarootkeeper)
INSTRUCTIONS:
1. Copy downloaded APKs to your phone
2. Install each APK and make sure to click DONE after each installs
3. Enable phones Wireless and connect via WiFi
4. Go to your phone SETTINGS>ACCOUNT AND SYNC
5. Press ADD ACCOUNT
6. Press AMAZON and enter your Amazon Prime credentials
7. Start the VooDoo OTA app
8. Press TEMP.UN-ROOT and allow the program to temporarily unroot your phone
9. Reboot your phone
10. When the phone comes up, still be attached via wireless and try your app
I hope this works for everyone who tries, please report your findings
Currently this app only works on wireless it will not work with your cell signal. I am looking to see if I can figure out how to enable the app to use the cell signal, I'm not a developer but I do have an idea to try!

ill try this on my Amaze 4G when i get home

I did all of these on my CM7 mod and "Watch Now" is still grayed out for me.

MoToKrusheR said:
I did all of these on my CM7 mod and "Watch Now" is still grayed out for me.
Click to expand...
Click to collapse
The only think I can say is that make sure the device is un-rooted and reboot after using the VooDoo OTA
You're just about there!

do you guys think this would work with the bionic?

elephant007 said:
The only think I can say is that make sure the device is un-rooted and reboot after using the VooDoo OTA
You're just about there!
Click to expand...
Click to collapse
I've done the reset 3 times, still a no go. Going to keep looking into it though.

MoToKrusheR said:
I've done the reset 3 times, still a no go. Going to keep looking into it though.
Click to expand...
Click to collapse
Are you doing this on a phone or on your Fire?
I wonder if you can remove root from some alternative method and see if you can run VOD, perhaps remove BurritoRoot if that's what you have installed.

There is something about CM7 that amazon does not like. I have never gotten it to work on CM7, even after temp unrooting. But if I did the same thing on a none cm7 rom, it worked fine. Go figure.

elephant007 said:
Are you doing this on a phone or on your Fire?
I wonder if you can remove root from some alternative method and see if you can run VOD, perhaps remove BurritoRoot if that's what you have installed.
Click to expand...
Click to collapse
It's on a fire. Before I flashed CM7 over, I was running just a rooted fire, and voodo ran just fine allowing amazon video to work when needed. Would be a shame if I couldn't get it to run on CM7.. not a huge loss, just would like to see if it could work on this variant..

That's too bad that it doesn't work on CM7
Maybe I should try it and see what I can find out

will try and post quick feed back

for those of you having problems running this one CW7, according to this link here http://forum.xda-developers.com/showthread.php?t=1390773 I'm guessing it's the MAC Address issue
Just a guess

elephant007 said:
for those of you having problems running this one CW7, according to this link here http://forum.xda-developers.com/showthread.php?t=1390773 I'm guessing it's the MAC Address issue
Just a guess
Click to expand...
Click to collapse
Wonder if an update.zip could be made for the CM7 variant in this thread?

MoToKrusheR said:
Wonder if an update.zip could be made for the CM7 variant in this thread?
Click to expand...
Click to collapse
EDIT - I flashed the updated/MAC address fix - No wipe ROM, but still a no go... Might have to do a full wipe/install?
This is the ROM: http://www.mediafire.com/?hmdc0lmgvnlbg97
Located in this thread - http://forum.xda-developers.com/showthread.php?t=1390773&highlight=mac
"If you're upgrading from an EXISTING CM7 install then use this ROM instead. This one will NOT wipe the cache and data partitions which should mean that you can upgrade from one version of CM7 to another without losing any of your existing date (or that's at least the idea)"

I tried this on my CM7 Kindle Didn't Work
I copied the apk's and ran the installs. It won't let me login to Amazon even. I just grabbed the apk's from the Kindle Fire .bin file though. I'll try the ones you have for download in your post and see if they work differently.

Hmm, MAC wasn't the problem
I'm on ICS and when I try to add an Amazon account I get a failure. I've checked my MAC and it's the same as under stock, but what does concern me is my serial number is all 0's.
Has anyone got this to work under ICS? Is everyone's serial number all 0's? Any other hints on how to get VOD working?

its working fine on my amaze 4g!

thedarksavant said:
I'm on ICS and when I try to add an Amazon account I get a failure. I've checked my MAC and it's the same as under stock, but what does concern me is my serial number is all 0's.
Has anyone got this to work under ICS? Is everyone's serial number all 0's? Any other hints on how to get VOD working?
Click to expand...
Click to collapse
Did you try logging into Amazon via WiFi?

"Parse error. There is a problem parsing the package" when install MyAccount-unsigned.apk. Any ideas?

Emerald214 said:
"Parse error. There is a problem parsing the package" when install MyAccount-unsigned.apk. Any ideas?
Click to expand...
Click to collapse
Redownload and try again, sounds like maybe it didn't download or get copied to your phone correctly

Related

Android Market?

I just finished reading an article on Eweek that indicates that access to the android market in mow available for computers http://market.android.com/....
I don't know if it is only supported on Honeycomb, but I can't wait to get home and try it...
here is the Eweek article also:
http://www.eweek.com/c/a/Mobile-and...comb-on-Xoom-Wows-Crowd-at-Googleplex-866135/
I shared your excitement but as I'm sure you discovered, it still does work! You need to log in with a Google ID, but when you do, it tells you that there is no Android phone associated with your account.
I don't have an Android phone but I wonder if I did have one and registered it, would the A7 then be able to access the Market?
Really, Google has made the situation worse because now I can see all the great apps in the Market but can't access them! There more bliss in the ignorance when I couldn't see the apps at all!
Dexter mod
Install the Dexter mod and you will have access to the market
try the slideme market just search for slideme in google
kingjf54 said:
Install the Dexter mod and you will have access to the market
Click to expand...
Click to collapse
Unfortunately, I updated to the Feb 4 firmware 1 day before I learned of of this...so now I wait!
I went to market.android.com on my device. Signed in with my Google Apps account, the same one I used to sign into Google Apps services on my A7. It shows everything I have downloaded using Dexters mod marketplace in it's history or whatever it's called. Also, I can choose install on any non installed app and immediately the app downloads to the A7. I didn't get any messages about the device not being registered. it just seems to work. I am in Canada as that may make a difference.
Joe
JohnnyG_TO said:
Unfortunately, I updated to the Feb 4 firmware 1 day before I learned of of this...so now I wait!
Click to expand...
Click to collapse
You can still use Dexter's MOD, you'll just need to do a back up and wipe/reset the device before updating.
Is there another way to get android without Dexer's Mod? My sister is getting one of these and I want to install the Market on it for her but I don't want her to have root (If it were mine it would be a different story). There should be some way to install the market and associated services to run it with an APK file without needing to root it, like my Archos 70.
kingjf54 said:
Install the Dexter mod and you will have access to the market
Click to expand...
Click to collapse
Tried it couldn't get to work. Followed all the advice and still won't work for me and I get the same error message as the other poster.
Google market for Tablet with Os 2.2
marcusmarcus said:
Is there another way to get android without Dexer's Mod? My sister is getting one of these and I want to install the Market on it for her but I don't want her to have root (If it were mine it would be a different story). There should be some way to install the market and associated services to run it with an APK file without needing to root it, like my Archos 70.
Click to expand...
Click to collapse
Borrow a friends Android phone, turn on its Bluetooth.
Turn on your tabs Bluetooth,pair them, use a file transfer program on his phone,download market on his phone when done tranfer it to your pad.A friend of mine did it and it works on on the free apps so far.You should then sign up with google account,before trying to get apps.
alcassetta said:
Borrow a friends Android phone, turn on its Bluetooth.
Turn on your tabs Bluetooth,pair them, use a file transfer program on his phone,download market on his phone when done tranfer it to your pad.A friend of mine did it and it works on on the free apps so far.You should then sign up with google account,before trying to get apps.
Click to expand...
Click to collapse
Where do you download the Market from? Can you give a more detailed step-by-step?
JohnnyG_TO said:
I shared your excitement but as I'm sure you discovered, it still does work! You need to log in with a Google ID, but when you do, it tells you that there is no Android phone associated with your account.
I don't have an Android phone but I wonder if I did have one and registered it, would the A7 then be able to access the Market?
Really, Google has made the situation worse because now I can see all the great apps in the Market but can't access them! There more bliss in the ignorance when I couldn't see the apps at all!
Click to expand...
Click to collapse
I have a android phone with the market and dexter 1.3 on my a7 when I go to the market on the computer it gives me the choice to sent apps to my a7 or to my phone. I have my a7 on and on the internet. It will send the app directly to the a7.
A few issues
Hi,
#1 - I can't find Dexter anywhere.
#2 - My A7 will pair, but not connect with anything.
Any thoughts??
Djankiew said:
Hi,
#1 - I can't find Dexter anywhere.
#2 - My A7 will pair, but not connect with anything.
Any thoughts??
Click to expand...
Click to collapse
I have a Epic 4 g and the A7, same problem, Pair but No Connect.
alcassetta said:
Borrow a friends Android phone, turn on its Bluetooth.
Turn on your tabs Bluetooth,pair them, use a file transfer program on his phone,download market on his phone when done tranfer it to your pad.A friend of mine did it and it works on on the free apps so far.You should then sign up with google account,before trying to get apps.
Click to expand...
Click to collapse
I just downloaded the latest Android Market apk file and tried this. It installs, but the app does not run. It just will not open. Sounded like a great idea!
Google Market
Djankiew said:
Hi,
#1 - I can't find Dexter anywhere.
#2 - My A7 will pair, but not connect with anything.
Any thoughts??
Click to expand...
Click to collapse
Here is the link to Dexters Mod: http://forum.xda-developers.com/showthread.php?t=890042
Here is the link to Bestialbub gapps Mod: http://forum.xda-developers.com/showthread.php?t=1019846
These are two different ways that will give you access to the app market, Please read everything before attempting to flash this.
smallba said:
Here is the link to Dexters Mod: http://forum.xda-developers.com/showthread.php?t=890042
Here is the link to Bestialbub gapps Mod: http://forum.xda-developers.com/showthread.php?t=1019846
These are two different ways that will give you access to the app market, Please read everything before attempting to flash this.
Click to expand...
Click to collapse
I have a dumb question! The mod by Bestialbub (What a name!) looks pretty simple, and it is what I am leaning towards. I really like my A7 and do not want to mess with it too much. I may even just decide to wait to see if Elocity comes out with an official patch. I just flashed my unit to the newest firmware. Do I need to do this again, as stated in the first part of the directions, or can I just boot into the recovery mode and flash using the file that I download? Also, what is the risk for doing this? Have many of you ran into issues with it? Thanks!
my market patch works fine w the latest update. check out my twitter under the same name for updated recoveries that will let you backup your rom, flash my mod, and restore back to where you were if you dont like it.
my mods a small one that can be applied anytime over the existing firmware. a factory reset should be done after that will wipe your data and let the google apps install properly on next rom boot.
i would suggest to wipe/factory reset w my clockworkmod recovery (on my twitter) as it should leave your internal storage partition w your media downloads alone. note; i havent actually tried that suggestion (reset) from cwm, but it sounds like a good idea.
Sent from my X10i using Tapatalk
Just did the update...no market!
bestialbub said:
my market patch works fine w the latest update. check out my twitter under the same name for updated recoveries that will let you backup your rom, flash my mod, and restore back to where you were if you dont like it.
my mods a small one that can be applied anytime over the existing firmware. a factory reset should be done after that will wipe your data and let the google apps install properly on next rom boot.
i would suggest to wipe/factory reset w my clockworkmod recovery (on my twitter) as it should leave your internal storage partition w your media downloads alone. note; i havent actually tried that suggestion (reset) from cwm, but it sounds like a good idea.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
I just ran this update, and followed the instructions to the letter. Everything seemed to go well, however, when the device rebooted, I see no Market link. What did I do wrong?
Never mind! I figured it out. The update.zip file I had on my sdcard was the elocity firmware file. I copied the patch to the wrong spot!! DOH!!!.;p).
Alas, Woe is me.
I went and loaded things (wallpapers, eBooks, games, etc.) onto my A7.... then I find this forum!
Is there an easy way (perhaps with a free, non-Marketplace, app) to back up all of this onto an SD card (or even a USB flash drive) and then re-install it after installing one of these mods?
I'm sure I could copy everything over individually, but there's got to be an easier way....is there?

Error when watching HBO Go even after IMEI generated

hello, sorry i searched an was unable to find a solution. I used the new solution of generating an imei number and have been able to log into hbo go and install swype, but when i go to play a video i get the HBO vid then an error about some videos may not be available. i tried the same videos from my phone with no problems. help would be greatly appreciated!! thanks in advance.
bump
bump
***I don't have HBO Go so I'm basically guessing here***
If you were using one of my hacked framework.jar files and then moved to DizzyDen's patched framework.jar then this would appear as if you IMEI number changed (which on a phone should never ever happen!)
I would start by clearing data in the HBO GO app and perhaps even un-installing / re-installing. Also, if you can log into your account (again I have no knowledge of how the app works) and somehow "reset" your devices, that might help.
Good Luck,
Martian21
martian21 said:
***I don't have HBO Go so I'm basically guessing here***
If you were using one of my hacked framework.jar files and then moved to DizzyDen's patched framework.jar then this would appear as if you IMEI number changed (which on a phone should never ever happen!)
I would start by clearing data in the HBO GO app and perhaps even un-installing / re-installing. Also, if you can log into your account (again I have no knowledge of how the app works) and somehow "reset" your devices, that might help.
Good Luck,
Martian21
Click to expand...
Click to collapse
this is the first time i generated an IMEI number and i installed HBO Go after it was done. i just cant seem to make sense of it.
molesaied88 said:
this is the first time i generated an IMEI number and i installed HBO Go after it was done. i just cant seem to make sense of it.
Click to expand...
Click to collapse
Did you verify the IMEI took? There were a couple versions of Dizzy's tool that had some issues. Try again with the latest version and duo the in place patch.
Sent from my NookColor using XDA App
martian21 said:
Did you verify the IMEI took? There were a couple versions of Dizzy's tool that had some issues. Try again with the latest version and duo the in place patch.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
i used the latest version of his automated app. how would i go about verifying if it took and what is the in place patch? thanks in advance!
molesaied88 said:
i used the latest version of his automated app. how would i go about verifying if it took and what is the in place patch? thanks in advance!
Click to expand...
Click to collapse
i was getting similar issues and just went into manage apps, force stop hbo go, clear data, reopen app reenter login, presto!
molesaied88 said:
i used the latest version of his automated app. how would i go about verifying if it took and what is the in place patch? thanks in advance!
Click to expand...
Click to collapse
If you'r running CM7... go into phone app and dial *#06#... When you hit the second # it will pop up a box telling you the IMEI...
If running MN'd stock... go to market and get IMEI widget... launch it and it will also report your IMEI.
The In-Place patch is to update framework.jar that is already on your device (ADB must be working... either via USB or WiFi).... this will keep you from having to patch a ROM every time you download it before updating the Nook... just update the ROM... then run in-place patch... it will modify the framework.jar on your device.

[Q] no working market on stock 3.2 ROM

Hi
Having some physical AZERTY keyboard issues with Taboonay 2.2 (great ROM), I decided to come back to stock 3.2 ROM, wich I did (downloading it from here).
But the problem now is that my market does not want to download anything, keeping stuck on "Preparing to download" or something like that...
Did some of you have this issue ?
How to solve it ?
Thanks
Nico
Restart the device, log into Gtalk and then try downloading from the market.
mitch1974 said:
Restart the device, log into Gtalk and then try downloading from the market.
Click to expand...
Click to collapse
ok, will try tonight (I'm at work right now)
Would I have to do that each time ?
Not normally, but I've had to use that trick on a G1, a Wildfire and a Desire.
nicopilami said:
Hi
Having some physical AZERTY keyboard issues with Taboonay 2.2 (great ROM), I decided to come back to stock 3.2 ROM, wich I did (downloading it from here).
But the problem now is that my market does not want to download anything, keeping stuck on "Preparing to download" or something like that...
Did some of you have this issue ?
How to solve it ?
Thanks
Nico
Click to expand...
Click to collapse
Might need a different version of the market app. If the above trick doesn't help, let me know, and I'll get you a good working version with instructions how to install it. I sometimes get that same error (stuck at downloading), but usually I have to cancel it several times, and eventually it get's going. Pretty sure with me, it's the Market site. They've only put out about 50 different versions of it, and when you get one that works, disable the auto update. Hopefully that stops it from updating to a newer version that doesn't work.
Moscow Desire said:
Might need a different version of the market app. If the above trick doesn't help, let me know, and I'll get you a good working version with instructions how to install it. I sometimes get that same error (stuck at downloading), but usually I have to cancel it several times, and eventually it get's going. Pretty sure with me, it's the Market site. They've only put out about 50 different versions of it, and when you get one that works, disable the auto update. Hopefully that stops it from updating to a newer version that doesn't work.
Click to expand...
Click to collapse
OK, thanks, will try that tonight
The market site is already a good alternative, but not very easy when I want to download many apps at once...
bye
Nico
nicopilami said:
OK, thanks, will try that tonight
The market site is already a good alternative, but not very easy when I want to download many apps at once...
bye
Nico
Click to expand...
Click to collapse
Rule number 1. Never download and install multiple apps. Sure way to "clog" the system. 1 at a time bro.
arf, the solution above does not work for me...
nicopilami said:
arf, the solution above does not work for me...
Click to expand...
Click to collapse
Ok, here is the market app I use.
I'm an old fashioned guy, so heed the instructions,
I assume you are rooted.
1. Using root explorer, or a file manager that has root access, rename you current "vending.apk" to like "oldvending.apk"
2. copy my market.apk into system/app folder.
3. Rename the market.apk to vending.apk (you probably need to only change the first name).
4. With your file manager, you can check the permissions (long press). Make sure your vending.apk has the same permissions as other files in the directory. Click the box as needed.
5. Reboot your tablet.
6. Go to Settings/applications/application manager, and delete the cache's.
7. This will make you log in to google market again when you start the app.
Should work, as the same version works for me.
EDIT: XDA, seems not to be able to handle attachments just now. They seem overloaded...... They can only handle about 200 users at any one time.
Try this;
http://dev-host.org/zGL
MD

unable to purchase paid apps googleplay

hi guys, as the title says...
I have cleared cache and data,
tried deleting my account and adding it again
reflashed my rom (taboonay 3.01.)
As soon as hit purchase I get "an error occurred. Please try again".
I can purchase via my phone and pc with no probs but not on my tab. Free apps are fine its just the paid ones, oh, and the in game apps wont either.
My next step is to factory reset but hoping someone may be able to help before having to go down that route.
ps I tried using my tabs browser to get to the webstore and successfully made a purchase - yay!! unfortunately it failed to download and the market shows no evidence of me having purchased it -boo!!. Emailed for a refund which i rec'd - phew!!
Which error code have you been receiving?
I know there have been issues with the market for a while now, and a lot of it is on google's side.
I had that on 3.2, same error.
What I did, was delete the current vending.apk
Copy in a different Market.apk, renamed it to vending.apk
Checked permissions to make sure they were the same as all other files in the same directory.
Then, go to App Manager, and delete the caches for the Market app.
Reboot, then do the sign in thing again for the market. It will eventually update itself. Should be good to go.
No error code is given, just what I posted "an error occurred. Please try again" as soon as I hit "Accept and Download".
I emailed googleplay support who inferred that my custom rom was at fault,typical support answer!! no-one else running taboonay seem to have issues so will wait a few days and try a full wipe an' format.
@moscow - thanks will try your suggestion first moscow, cheers
edit: seems there are some peeps psoting the same issue in the taboonay thread - i should have begun reading the newer posts, rather than older ones first...
new googleplay update 3.5.15
apparently there has been an update to googleplay i don't know when and not sure which version i currently running - not until i get home anyway.
i got the apk from droid-life if anyone wants it
I'm getting the same errors . Anyone have any ideas?
Tried moscows suggestion but no joy
So, factory reset, full wipe and full format and still no joy...
fixed...sorta
k, i just restored an icylicious backup and success!!! Heaven knows why it wont work on taboonay for some of us - anyways, if anyone comes up with a proper solution pls feel free to post it...
Did you try to download a free app first and then a payed one ?
I never had market problems and I flash almost every day clean install for testing.
I would suggest to keep trying and first a free app.
I added the phonesky.apk (original acer vending app) ,
First remove the playstore or vending app (depending on what it is called) in system/app with file manager with root.
Then copy / paste the phonesky.apk in that system/app folder and reboot but make sure before you do this all to clear cache and data of market app in settings apps.
civato said:
Did you try to download a free app first and then a payed one ?
First remove the playstore or vending app (depending on what it is called) in system/app with file manager with root.
Then copy / paste the phonesky.apk in that system/app folder and reboot
but make sure before you do this all to clear cache and data of market app in settings apps.
Click to expand...
Click to collapse
1. Delete /system/app/phonesky.apk
2. Copy&Paste civ's phonesky.apk into /system/app
3. Change permissions rw-r--r--
4. Settings>Apps>Google Play Store - Clear Cache and Data
5. reboot
6. open Play Store
7. Playstore updating
8. Accept terms of service
9. Download and installed a free app
10. Choose paid app, hit purchase
11. Error - An error occurred. Please try again.
12. tear hair out...
thanks for trying civ - i think i did the steps as you meant them to be done - it just won't work... I really wanna keep taboonay so looks like I'll have to switch to icylicious to purchase and install and then switch back to taboonay - weird!!!
I've been using the browser to go to https://play.google.com/store and buy from there.
chasmanian said:
I've been using the browser to go to https://play.google.com/store and buy from there.
Click to expand...
Click to collapse
Yes, that is an option, Are u on taboonay? -I tried the webstore but it gives me 9 or 10 different devices for my one and only tab!! I picked one and tho the purchase went thru fine - it never downloaded to tab so dunno where it ended up. Becoz it never actually got to my tab, I never got the refund option - had to email support for that, so i figure its easier to switch roms
Something that seemed to work for me
EDIT: It was crazy just tried to buy xda app and failed...... Ignore the rest of this post!!!
It might sound a bit crazy, but after doing a full format have you tried installing a HC ROM and making a purchase / downloading something free, then installing Tabooney 3.0.1 again? I had a ROM that was causing me the same issues + many others with certain apps I use alot, so I scrapped ICS for a month or so and used a couple of other ROMS (all HC) then tried Tabooney again. Amazingly it worked and purchases went through... Maybe not 'everythnig' is fully cleared out and installing a HC ROM killed the issue?? Not too sure, but I no longer have purchasing issues on my Desire HD or A500 with ICS... Just rage face when apps crash and playstore shuts and random stuff stops responding for a few seconds! (just removed ICS from my A500 after the GPS once again started teleporting me into fields and other roads from what i was on again... dam I want to be able to have a solid ICS ROM )
Anyways hope that helps someone
James
dibb_nz said:
Yes, that is an option, Are u on taboonay? -I tried the webstore but it gives me 9 or 10 different devices for my one and only tab!! I picked one and tho the purchase went thru fine - it never downloaded to tab so dunno where it ended up. Becoz it never actually got to my tab, I never got the refund option - had to email support for that, so i figure its easier to switch roms
Click to expand...
Click to collapse
I am on Taboonay. When you pull the drop down menu for the devices, there should be a date you used it last next to each. I think there used to be a way to remove old device names from the list but I can't recall where or how right now.
chasmanian said:
I am on Taboonay. When you pull the drop down menu for the devices, there should be a date you used it last next to each.
Click to expand...
Click to collapse
k, i used the latest date and tried to install a previously purchased app, got the "will be d/l to your device shortly" after 30 mins I'm still waiting...
one thing I've noticed, I d/l a couple of free apps from the playstore on my tab. They are installed. The webstore however, shows them in 'My Apps' but to install only - therefore, they are not installed according to the webstore. So, I'm thinking perhaps the devices that are showing are ones that I have registered thru acer when I have intalled a new rom??? does that make sense - I know what I'm trying to say just not sure its comin out right, lol.
If i download apps in the market/playstore but the webstore don't see them as installed AND trying to d/l from the webstore to a "device" leaves me waiting, waiting, waiting. Then the webstore is not seeing the current "device" that I'm using??? Maybe becoz its not registered???? If u r on taboonay could u check to see if this is the case for you???
EDIT: I went to acer to register. Entered my SNID and it tells me it is INVALID...the plot thickens....
rytterbomb said:
EDIT: It was crazy just tried to buy xda app and failed...... Ignore the rest of this post!!!
Click to expand...
Click to collapse
dammit that sounded promising
dam I want to be able to have a solid ICS ROM )
Click to expand...
Click to collapse
I tried the lightspeed rom last nite seemed to work well, i can purchase apps with it anyway!! I haven't suffered the SOD issue with this or icylicious or even taboonay so I guess I can be thankful for that at least...
Actually, after thinking about this, the latest date that shows might be the one you chose in the online store before, the one that didn't work. Try this- go into the google play app and Install a free app. Doesn't matter which one. Then, go to the online store and see if the name of the latest used device is any different. Mine is called Acer A500 by the store, if that helps.
I have a different issue.. I have rooted my A501, flashes moscow's alexandria rom, activated market enabler but still no luck in buying paid apps.. "The item you were attempting to purchase could not be found"
Any help?
ebonikeys said:
I have a different issue.. I have rooted my A501, flashes moscow's alexandria rom, activated market enabler but still no luck in buying paid apps.. "The item you were attempting to purchase could not be found"
Any help?
Click to expand...
Click to collapse
True! not heard of that one before - do you get that same error with all paid apps??
dibb_nz said:
True! not heard of that one before - do you get that same error with all paid apps??
Click to expand...
Click to collapse
yes, the same error.
So far I haven't encountered other errors.

How To Bypass the Auto-Update (Tested on Nook HD+)

One annoying feature of new Nook HD+ (and assuming Nook HD) is that during initial set up it will look for and force you to update (if one is found). There is a neat and really easy trick to bypass this process.
Once you get to that step in the process, during the process hold down the power button and force it to shut off by selecting "OK" in the prompt. You have to do it before it finishes downloading the update.
Once you power it back on you'll have to restart the whole process of entering your WiFi and information again. When you get to the point where the device looks for an update, it will look for a few seconds and determine that its got the latest version installed and proceed to the next phase.
To make sure you did it correctly just go into "Settings" and check the version. For me my default was 2.0.4, for you it may be different, but either way its not 2.0.5.
I've tested it multiple times and always with great success.
What about 2.0.4 do you prefer over 2.0.5?
Also, let us know if this actually stays on 2.0.4. Those of us who had already registered Nooks (both HD and HD+) when 2.0.5 came out got updated in spite of having turned off auto updates.
lkmiller said:
What about 2.0.4 do you prefer over 2.0.5?
Also, let us know if this actually stays on 2.0.4. Those of us who had already registered Nooks (both HD and HD+) when 2.0.5 came out got updated in spite of having turned off auto updates.
Click to expand...
Click to collapse
It was for rooting purposes, since at the time I couldn't find a rooting tool for 2.0.5, that's why. Also I too had registered once under 2.0.5, and when starting fresh found that this method does work regardless of what you initially registered under. Though it only buys you little time to do whatever modifications you need to to your device before it automatically updates you (you could also leave WiFi turned off too).
dcoke said:
It was for rooting purposes, since at the time I couldn't find a rooting tool for 2.0.5, that's why. Also I too had registered once under 2.0.5, and when starting fresh found that this method does work regardless of what you initially registered under. Though it only buys you little time to do whatever modifications you need to to your device before it automatically updates you (you could also leave WiFi turned off too).
Click to expand...
Click to collapse
What device are you running? Still would like your factory zip.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
dcoke said:
It was for rooting purposes, since at the time I couldn't find a rooting tool for 2.0.5, that's why. Also I too had registered once under 2.0.5, and when starting fresh found that this method does work regardless of what you initially registered under. Though it only buys you little time to do whatever modifications you need to to your device before it automatically updates you (you could also leave WiFi turned off too).
Click to expand...
Click to collapse
Ok, I thought that might be why. Thankfully we can root 2.0.5 now. But it's good to know this method of postponing that initial update if I ever need to reset and start over.
nook hd+ auto-updated after leapinlar root+cwm fixes
My Nook HD+ notified me last night that it had auto-updated to 2.0.6 but I was able to get back my original Nova Prime Launcher and the Google Play store continues to work (it broke Beautiful Widgets, but uninstalling it and reinstalling it fixed that)
I had originally rooted it from 2.0.5 using the Universal Root method here: http://forum.xda-developers.com/showthread.php?t=2062613
I had the following images installed:
NookHD-HDplus-Gapps+Extras-for-stock-rev1.zip
NookHD-HDplus-Universal-Root-rev1.zip
NookHD-HDplus-LocationServices.zip
Using CWM for here:
NookHDplus-bootable-CWM-6023-for-emmc-stock-4GB-rev1.zip
Note - I did not manually update or in anyway 'induce' the update, it just happened. Did I miss something in the instructions to prevent auto-update?
Atleast the play store and Nova Launcher keeps working (not had time to check if root is still working though) But I did notice that the B&N Home launcher keeps showing up more often than before (hitting apps and going back brings back Nova)
Thanks
vtmanryn said:
My Nook HD+ notified me last night that it had auto-updated to 2.0.6 but I was able to get back my original Nova Prime Launcher and the Google Play store continues to work (it broke Beautiful Widgets, but uninstalling it and reinstalling it fixed that)
I had originally rooted it from 2.0.5 using the Universal Root method here: http://forum.xda-developers.com/showthread.php?t=2062613
I had the following images installed:
NookHD-HDplus-Gapps+Extras-for-stock-rev1.zip
NookHD-HDplus-Universal-Root-rev1.zip
NookHD-HDplus-LocationServices.zip
Using CWM for here:
NookHDplus-bootable-CWM-6023-for-emmc-stock-4GB-rev1.zip
Note - I did not manually update or in anyway 'induce' the update, it just happened. Did I miss something in the instructions to prevent auto-update?
Atleast the play store and Nova Launcher keeps working (not had time to check if root is still working though) But I did notice that the B&N Home launcher keeps showing up more often than before (hitting apps and going back brings back Nova)
Thanks
Click to expand...
Click to collapse
We have known for a while that setting the OTA to manual does not seem to stop auto updates anymore. The good news is that it still accepts the root. Just flash universal root again.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
I might have found a way how to disable Nook HD OTA autoupdate feature.
For some reason setting com.bn.device.fota.mode to manual does not work, so there is more straight approach to solve this.
So far i have found two:
1) Once you have rooted your device it is just a matter of editing /etc/hosts file and adding couple of lines
127.0.0.1 nook.com
127.0.0.1 barnesandnoble.com
127.0.0.1 su.barnesandnoble.com
which effectively blocks access to autoupdates, but when you reboot your device, all your data will be erased (nook will restore itself to factory state). So some way around is needed.
2) There is an app on google store called "Android Firewall", install it. Once installed block Wifi for NookConnectivityService. GAPPS and browser will not be affected, you'll get norification "Wifi error". But otherwise wifi is fuctional.
2) There is an app on google store called "Android Firewall", install it. Once installed block Wifi for NookConnectivityService. GAPPS and browser will not be affected, you'll get norification "Wifi error". But otherwise wifi is fuctional.
Click to expand...
Click to collapse
Blocking NookConnectivityService kills connectivity to the Google Play.
greenya said:
1) Once you have rooted your device it is just a matter of editing /etc/hosts file and adding couple of lines
127.0.0.1 nook.com
127.0.0.1 barnesandnoble.com
127.0.0.1 su.barnesandnoble.com
which effectively blocks access to autoupdates, but when you reboot your device, all your data will be erased (nook will restore itself to factory state). So some way around is needed.
Click to expand...
Click to collapse
You can symlink the hosts file. See my HD/HD+ tips thread linked in my signature. Look at item 15. Of course there are othe ways to prevent the update, like symlinking build.prop and doing the white on white repair. But those just cause the update to fail, while this may prevent them even checking. If this works, I may update my CWM zip to include it.
EDIT: After researching this a little I have found an easy way to accomplish this. That is to use AdAway. You can safely use that program if you configure it to put the hosts file on /data. It automatically symlinks it for you. But you need to be rooted to use this app. And it has a feature where you can add your own sites to block. Just add those sites listed in the post above. Then every time AdAway updates its own list, it adds your list to it also. This will block B&N from using those sites to download their updates. But realize that it also blocks you from browsing their site.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
EDIT: After researching this a little I have found an easy way to accomplish this. That is to use AdAway. You can safely use that program if you configure it to put the hosts file on /data. It automatically symlinks it for you. But you need to be rooted to use this app. And it has a feature where you can add your own sites to block. Just add those sites listed in the post above. Then every time AdAway updates its own list, it adds your list to it also. This will block B&N from using those sites to download their updates. But realize that it also blocks you from browsing their site.
Click to expand...
Click to collapse
Nice! It works then Including it to CWM zip is a good idea, with a warning, that you get to loose one site. That rooting thing imho is the whole reason for not using it, but substituting with google play.
BTW Is your hybrid cm10.1 stable on nook hd+ ?
greenya said:
Nice! It works then Including it to CWM zip is a good idea, with a warning, that you get to loose one site. That rooting thing imho is the whole reason for not using it, but substituting with google play.
BTW Is your hybrid cm10.1 stable on nook hd+ ?
Click to expand...
Click to collapse
WARNING! Hybrid not for HD+ !!!
greenya said:
BTW Is your hybrid cm10.1 stable on nook hd+ ?
Click to expand...
Click to collapse
My Hybrid setup on the HD+ is experimental and a hacked version by me. And I am running verygreen's 1-07 version of CM10.1. The Hybrid works great and is very stable, but the CM10.1 is buggy.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
My Hybrid setup on the HD+ is experimental and a hacked version by me. And I am running verygreen's 1-07 version of CM10.1. The Hybrid works great and is very stable, but the CM10.1 is buggy.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
Seems i missed somewhere something
datas0ft said:
Seems i missed somewhere something
Click to expand...
Click to collapse
You did not miss it. I just got it working this weekend and this is the first I have told anyone. I am going to test it a while before I even consider making it for anyone else. It does work but I had to manually configure some things. And it only works on CM10.1, not CM10. Until we get some better CM10.1's it does not really matter anyway.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
You did not miss it. I just got it working this weekend and this is the first I have told anyone. I am going to test it a while before I even consider making it for anyone else. It does work but I had to manually configure some things. And it only works on CM10.1, not CM10. Until we get some better CM10.1's it does not really matter anyway.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
This news change many things. But seems verygreen is so busy last time or found something new interesting.
Anyway. If you need some "hard testing" (when testing may make item dead) then ask me. I have one item with no warranty and ... you know, its not mine ... and its not last one.
greenya said:
I might have found a way how to disable Nook HD OTA autoupdate feature.
For some reason setting com.bn.device.fota.mode to manual does not work, so there is more straight approach to solve this.
So far i have found two:
1) Once you have rooted your device it is just a matter of editing /etc/hosts file and adding couple of lines
127.0.0.1 nook.com
127.0.0.1 barnesandnoble.com
127.0.0.1 su.barnesandnoble.com
which effectively blocks access to autoupdates, but when you reboot your device, all your data will be erased (nook will restore itself to factory state). So some way around is needed.
2) There is an app on google store called "Android Firewall", install it. Once installed block Wifi for NookConnectivityService. GAPPS and browser will not be affected, you'll get norification "Wifi error". But otherwise wifi is fuctional.
Click to expand...
Click to collapse
Thank you for this. It works. I added the manual way to do it via AdAway to my HD/HD+ Tips thread and added a CWM zip to my HD/HD+ CWM thread to automatically do it for you if you are not rooted. Both threads are linked in my signature.
Sent from my Nook HD+ running rooted stock
leapinlar said:
Thank you for this. It works. I added the manual way to do it via AdAway to my HD/HD+ Tips thread and added a CWM zip to my HD/HD+ CWM thread to automatically do it for you if you are not rooted. Both threads are linked in my signature.
Sent from my Nook HD+ running rooted stock
Click to expand...
Click to collapse
Could you also just freeze the NookConnectivityService app using Titanium Backup - seems to work for me
docfreed said:
Could you also just freeze the NookConnectivityService app using Titanium Backup - seems to work for me
Click to expand...
Click to collapse
Someone earlier says doing that blocked his Google Play. Is yours working ok?
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Someone earlier says doing that blocked his Google Play. Is yours working ok?
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
If you mean the Play Store, yes no problem - I don't use any other Play apps (like music, books, etc.). I am on 2.06, rooted, ADW EX Launcher and see no issues whatsoever with WiFi (as a matter of fact, no issue signing in to BN.com and downloading one of my books.

Categories

Resources