Hi.
In first case.. Sorry for my English
I have a little problem with the touchscreen on my Galaxy S.
I think it's something with firmware. Sometimes don't work about 20-30 pixels on the left and the right side.
It makes me mad, because i need move the widget from one screen to next one, and isn't working. So, i have to open SGS tools, and do TSP update (touchscreen firmwareversion). After update is Pass on the screen and everything works perfectly, BUT only for a moment (sometimes few hours, max one day).
Then i have to do everything again
Does anyone know what to do?
try to make a nandroid backup and then reflash your firmware or do an hard reset and see what happens
No, this isn't working.. I had a lot of different ROM and I did hard reset etc. (2.1, 2.2, 2.2.1)(JPU, JPY, JM1/2)
Now I have Darky ROM 7.7 and OCUV Kernel. I thing, somewhere in phone is correct firmware, because when I did update I don't have to turn on wifi or 3g. Update is working offline and then everything work..
I recently tried changing my theme, i rooted my phone, Downloaded ROM manager and Clockworkmod, when i installed it all, it bricked my phone- I unbricked it by updating the firmware with Odin, but now the touchscreen is not working - At Alll.
Help :\
hi,
i installed cm 7.1.0. after a week or so, the touchscreen stops working properly. i wiped using the calkulkin erase all zip. tried flashing again and erasing then other stable version. touchscreen continues to play up. finally flashed with sun rom. home key and eome keyboard keys still dont work. any suggestions?
cheers paul
It's obviously a hardware issue if it persists across ROMs (Not that a ROM can ever cause a touchscreen to play up randomly)
which bit
thanks 3xeno,
any ideas on which bit - controller or screen itself? I can replace the screen and the receiver.
Cheers Paul
I have similar problems any progress with this?
Installation
https://github.com/LegacyHuawei/local_manifests/wiki/Installation
Bugs
https://github.com/LegacyHuawei/local_manifests/wiki/Status
Downloads
https://basketbuild.com/devs/LegacyHuawei
Changelog
https://github.com/LegacyHuawei/local_manifests/wiki/CM11.0-changelog
If you have any bugs to report, open new issue at https://github.com/LegacyHuawei/local_manifests/issues
Readme
Use the standard Torch app wherever possible, it only enables flashlight. Other apps from Play Store are designed to use the camera interface, which means camera will use additional power.
For more RAM: Settings->Performance->Memory management.
Do not enable KSM, as video encoder/decoder stops working.
HuaweiSettings
Charge current - allows you to set custom charging current. While this actually limits the current input, it effectively decreases or increases the available current transferred to the battery. This is useful in multiple ways:
Slower, but more effective charging. Your battery will last longer.
Faster charging when connected to USB. For example, USB charging is limited to 500mA, but newer PCs allow drawing up to 800mA or even more. This can be configured via the setting.
Manual override of non-standard charger allowing to draw more than 500mA.
Magnetic sensor calibration - lets you delete previous calibration information. This is useful to recalibrate the compass (when it's inaccurate). Just tap the item & then open any compass up to recalibrate your sensor.
If the phone reboots unexpectedly, crash log is found at /data/dontpanic .
To report bugs, use this app: https://play.google.com/store/apps/details?id=com.tortel.syslog
Thank you, i'll try
wow, downloaded...
Many thanks, good job!
after installing cm11 and gapps, the phone always reboot to recovery
ggunzio said:
after installing cm11 and gapps, the phone always reboot to recovery
Click to expand...
Click to collapse
Did you do a factory reset before?
And does it show the cm logo or just boot to recovery?
Sent from my IDEOS X5 using Tapatalk
Blefish said:
Did you do a factory reset before?
And does it show the cm logo or just boot to recovery?
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
before installing the rom, i've wiped everything, data, cache, system and dalvkit cache, reboot recovery. After installed the rom, and right after, installed the gapps. Then, in recovery, reboot system and after it show the huawei logo, it enters recovery without showing the CM logo.
EDIT: i will install ble_part stock, and them install again the B518, repartition again and try to install CM again.
Booted and installed just fine after doing Blepart and using your recovery. It's slow as molasses, probably in great part due to the fact that the display glitches are still there, but it certainly works, and it's as much KitKat as my Moto G. Something worth mentioning, your recovery has some sort (the same?) of display glitch as well in which the screen only seems to update after a couple of presses of the volume button, not immediately.
ROM and GAPPS, everything works fine.
No glitches for me.
Great job, thanks!
faekplastik3s said:
Booted and installed just fine after doing Blepart and using your recovery. It's slow as molasses, probably in great part due to the fact that the display glitches are still there, but it certainly works, and it's as much KitKat as my Moto G. Something worth mentioning, your recovery has some sort (the same?) of display glitch as well in which the screen only seems to update after a couple of presses of the volume button, not immediately.
Click to expand...
Click to collapse
Thanks.
I don't have any devices to compare it with so it feels "fast" to me. Its great to know the recovery suffers same display bugs, it confirms that its in fact kernel side problem. Though, kernel side does not have BLT enabled, which I thought would be the problem. I'll debug the registers, and see if I can find something odd. It could also be a clock hz issue, it was changed in 3.4.
Sent from my IDEOS X5 using Tapatalk
Blefish said:
Thanks.
I don't have any devices to compare it with so it feels "fast" to me. Its great to know the recovery suffers same display bugs, it confirms that its in fact kernel side problem. Though, kernel side does not have BLT enabled, which I thought would be the problem. I'll debug the registers, and see if I can find something odd. It could also be a clock hz issue, it was changed in 3.4.
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
Well, it stutters a lot, and it's not nearly as smooth as something like Aurora or even stock Huawei ROMs, but I'm sure it's related to the display issues or another issue like that because even scrolling through the Settings app or the little animation in the notification drawer that flips into the shortcuts stutters like hell and drags around, which shouldn't be an issue for this device and wasn't a problem with other ROMs, and overclocking and other user-level optimizations do nothing to alleviate it.
I did also notice black screens when waking the device from lockscreen (digitizer still works) almost every time, requiring multiple attempts until the display finally wakes. I know you squashed this one multiple times, but here it is again.
It's a miracle for this to happen to begin with, so I can't help to be amazed seeing KitKat on this device. Thank YOU so much, Blefish.
do i need to have my phone rooted?
faekplastik3s said:
It's a miracle for this to happen to begin with, so I can't help to be amazed seeing KitKat on this device. Thank YOU so much, Blefish.
Click to expand...
Click to collapse
This. If some months ago anyone told me I'd be installing 4.4 on this device I'd tell them they were crazy.
Thanks for your amazing work, Blefish
Here its works as it should be, you are awesome blefish
Sent from my SM-T210 with rocketTab 2.1 + MK1 kernel using tapatalk v4
Finally i could get it to boot.
probably i broke something, i've installed the oficial rom and then, with 5.5.0.4 recovery wiped everything. Next installed the blepart, new recovery and its working
Good job sir
Thank you!
faekplastik3s said:
I did also notice black screens when waking the device from lockscreen (digitizer still works) almost every time, requiring multiple attempts until the display finally wakes. I know you squashed this one multiple times, but here it is again.
Click to expand...
Click to collapse
Yes, I have waking problems too.
Install everything (partition, 6 recovery, cm11 rom and gapps) and works pretty well so far.
Fantastico. :good::highfive:
lemene said:
Install everything (partition, 6 recovery, cm11 rom and gapps) and works pretty well so far.
Fantastico. :good::highfive:
Click to expand...
Click to collapse
is anyone having problems to connect to wifi networks? i cant connect
EDIT: i guess that is a problem with the wireless definition of the rom, im thinking this, because i can connect to open networks, but when i change the segurity of the wlan to wpa or wpa2, i can't connect to it.
Could you look at this @Blefish?
Im not sure if its a bug or not, maybe something is broken in wpa.supplicant
[]
I have flashed BlePart recovery, i have rebooted the recovery and i have flashed blepart 2.2 then i have flashed CVM Version 6.0.4.6. The phone rebooted and now i cant open the phone or recovery. I tried to install offical 2.3 from sd card but i coudn't. How can i recover my phone?
Hi everyone! I have a hardware related issue here.
I have replaced the screen (+digitizer in a whole) and since then it is randomly going off and on. Interestingly it even did the same in recovery (TWRP 2.3) BUT not with every software! Installing the TWRP 2.6 or above stopped it happening in the recovery.
I have tried various ROMs so far. The Eclipse ver3 did not flicker, but it has a problem with the registering on a network here in the UK. Stock + stock based ROM (Rage 1.2) are also switching on-off. I am currently looking for a working ROM.
Please let me know if someone with the same problem can find one.
Also tried to play with developer options like Disable HW overlays or Force GPU rendering with no effect.
I wonder if it is a different hardware version of the replacement screen or what else can it be? (screen came from etradesupply)
Update - problem solved
Good news. Installing CyanogenMOD 11 solved the screen flashing issues and everything seems to work right. Thank you developers!
Need some help guys ,
I flashed the leaked LGViet update on my D802, coming from cloudy 2.0 rom, did all the wipes , it booted fine but my touch screen has gone crazy, registering touches all over the place ... i some how managed to flash my backup after multiple tricky tries, but still facing the touch screen issue
Could some one please help me