[Q] buttons fail - Wildfire General

hi,
i installed cm 7.1.0. after a week or so, the touchscreen stops working properly. i wiped using the calkulkin erase all zip. tried flashing again and erasing then other stable version. touchscreen continues to play up. finally flashed with sun rom. home key and eome keyboard keys still dont work. any suggestions?
cheers paul

It's obviously a hardware issue if it persists across ROMs (Not that a ROM can ever cause a touchscreen to play up randomly)

which bit
thanks 3xeno,
any ideas on which bit - controller or screen itself? I can replace the screen and the receiver.
Cheers Paul

I have similar problems any progress with this?

Related

[Q] G-Sensor not working Help

Hi all,
I have had my Vega for two weeks now and my G-Sensor has stopped working. I am currently running Fuji-Vega Modded Rom based on Modaco Rom v0.7.
I have put back the original rom back on from the Vega website Version 1.10 but the G-Sensor still done not work.
How can I check if there is a problem with the hardware before I take to back PC World/Currys.
Many Thanks
Pav
Hi PavSingh!
I also have the same problem, the gsensor stoped working. No screen rotation and also the games doesn`t works.
I have Corvus5 with SP1.
Someone have the same problem? how can i fix it?
Thanks
Have you tried a reboot. I have had this a couple of times and a reboot has fixed it
yes, I also wipe and reinstall corvus5 and corvus5sp1 and the accelerometer doesn`t work
I am starting to think that something on the sensor is broken
Thanks
try to move the switch on top of the tablet...
Ok thanks a lot. The problem was that switch, i think that switch is to lock the buttons not to lock the gsensor. The kids have been playing with it and the have changed the switch.
Thanks a lot.

Problem with touchscreen since 4.4.2 update

Hey there
A friend of mine has the following problem with his Note 3 (completely stock).
Since the latest 4.4.2 OTA update, sometimes suddenly the screen does not respond to touching it with your hand. It does react to the stylus.
Locking and unlocking the screen does the job, but only for a few minutes.
I wiped the phone via stock recovery, but the problem persists.
Anyone with the same problem, or maybe a clue?
Thanks!
GT-i9300, CM11, Boeffla
joriswagter said:
Hey there
A friend of mine has the following problem with his Note 3 (completely stock).
Since the latest 4.4.2 OTA update, sometimes suddenly the screen does not respond to touching it with your hand. It does react to the stylus.
Locking and unlocking the screen does the job, but only for a few minutes.
I wiped the phone via stock recovery, but the problem persists.
Anyone with the same problem, or maybe a clue?
Thanks!
GT-i9300, CM11, Boeffla
Click to expand...
Click to collapse
Hi
Same problem here,I tried several 4.4.2 official and custom roms but not fixed and I tried these too:
I tried mega wipe and last rom in samfirmware!
I removed my external sd card
And I googled and found there are others with same problem so it shouldn't be hardware problem
p.s.When screen freezes just half of it works! And just doesn't work by fingers and it works by s_pen!
There no way to come back to 4.3 too
What should I do?
Ty in advance
Finally Solved!
Hi
I had same problem
I did everything u said like:
mega wipe and changing rom
custom roms
taking out battery when it's on ( I Did this but I don't know It had any effects on my phone or not!)
taking out external card
But I still Had the Problem
Solution:
But I had a flip cover and I separated that from phone and thanks God,surprisingly It's Fixed and it works like a charm!!! after that I used my original cover and there is no problem till now.
Good Luck
Had the same issue posted it here bit no one responded.
Solution: The flip case I had..there's a problem with it where it locks the screen even when the case is not closed. But lately I had no issue it just seem to gotten fixed by itself.
Sent from my SM-N9005 using XDA Premium 4 mobile app

Screen flashing off and on randomly after screen change

Hi everyone! I have a hardware related issue here.
I have replaced the screen (+digitizer in a whole) and since then it is randomly going off and on. Interestingly it even did the same in recovery (TWRP 2.3) BUT not with every software! Installing the TWRP 2.6 or above stopped it happening in the recovery.
I have tried various ROMs so far. The Eclipse ver3 did not flicker, but it has a problem with the registering on a network here in the UK. Stock + stock based ROM (Rage 1.2) are also switching on-off. I am currently looking for a working ROM.
Please let me know if someone with the same problem can find one.
Also tried to play with developer options like Disable HW overlays or Force GPU rendering with no effect.
I wonder if it is a different hardware version of the replacement screen or what else can it be? (screen came from etradesupply)
Update - problem solved
Good news. Installing CyanogenMOD 11 solved the screen flashing issues and everything seems to work right. Thank you developers!

[HELP] Loss of response on G2 screen !?!?

I have been experiencing unresponsive spots on my screen. For example, in portrait mode, in Titanium Backup, I am unable to get Wipe Data button to work BUT both the Delete & Uninstall buttons, above & below it, will trigger instead. I have also experienced this happening in the Play Store where the Uninstall button will not respond. It seems to be happening in roughly the same area on my screen.
This just started happening recently & I would like to know if this is a known issue or what ?!
I am running the latest Mahdi ROM 7/9 with dr87's stock kernel on my VS980. I have since tried going back to the 7/7 build as well as trying Render & barts modded Dori kernel.
Please reply via PM if possible, many thanks !
*** I have been trying the 'Show Touches' Development Tool and it (obviously) still happens but it is showing touches in the area that is in question. IDK what this proves > not a hardware issue ?! Help .... please.

Samsung S4 GT-I9505 touch lights doesnt work after update

Hello! I have a strange problem after the last update of Android 5.0.1 Somehow the touch light buttons (those near home button) doesn't work at all.
What can I do ? I flash the ROM, wipe everything, nothing seems to work.
I open to suggestions or if the is app that could fix this let me know!
Thanks in advance
I'm having the same problem but I'm not sure if its because of the last update or not.
I'm using an app called Back Button to workaround this for now.
Would also be interested in other solutions.
I have the same issue too but after a factory reset, touch light work

Categories

Resources