I´m not sure if the version run on my defy with the defy+ kernel ...!!
have anybody tried this romversion?
smartiejunky said:
I´m not sure if the version run on my defy with the defy+ kernel ...!!
have anybody tried this romversion?
Click to expand...
Click to collapse
KANG means nothing but its an Experimental Build (Nightly) .. If u have GB kernel try Epsylon3 CM7 Roms for Defy+ (GB kernel) ..
and regarding KANG if the build is named Addressing Defy or Jordan, then its for Defy.
and if its named addressing GB kernel or Defy+ then its for Defy+ !!
Thanks for the informations I know about epylons3 CM7.2 nightly builds but on his versions the camera doesn´t work 100%! It´s overhead on my defy.. so it doesn´t usable for me
...I´ve tried out the "KANG" version of CM7 and it doesn´t work on the defy+ kernel !
but the headline of kangs thread means that it was also for the defy+. Thats not true!
On my brothers Defy the ROM run very well and smooth!
..I hope i can flash this ROM very soon!
Is it possible to make a "extra" version for the defy+/defy with new kernel ??
Because i get crazy about the new kernel and the nighlty builds (epsylon3/quarx)
for defy+ works very good and fast but the camera is overhead.
I´ve tried to replace the camera.apk from another build, but it doesn´t help me to fix this problem.
i think it just mod the lockscreens,i prefer Ep3 's builds.
smartiejunky said:
...I´ve tried out the "KANG" version of CM7 and it doesn´t work on the defy+ kernel !
but the headline of kangs thread means that it was also for the defy+. Thats not true!
On my brothers Defy the ROM run very well and smooth!
..I hope i can flash this ROM very soon!
Click to expand...
Click to collapse
If it is given that it is for defy+..then i suppose u need to flash GB kernel along with the ROM [may be that ROM is having Froyo kernel]..try it.. that may work..and right now Eppy and Quarx are working on Defy CM 7.2 & CM9..once the boot loader is unlocked , i think defy+ will have a lot of scope..think they are facing some problem with GB kernel..
Sent from my MB526 using XDA App
smartiejunky said:
Is it possible to make a "extra" version for the defy+/defy with new kernel ??
Because i get crazy about the new kernel and the nighlty builds (epsylon3/quarx)
for defy+ works very good and fast but the camera is overhead.
I´ve tried to replace the camera.apk from another build, but it doesn´t help me to fix this problem.
Click to expand...
Click to collapse
You can use Epsylon3 last nighty simply adding those patchs.
Ok! Thanks "elTorres" I´ll try the newest nightly and these patches and look how it work Thanks for all the fast help !
ok, i´ve tried it with the newest nightly (7.2) for defy+
and the two patches from [] AL [] (big thanks!)
-made stresstest, etc., testphotos! and wow it works perfecly!
Cyanogenmod is still a fast, beautiful rom !
Related
I am currently trying to get full battery of my defy+ to work under MIUI. Being CM based i assumed it would work with the CM battery patch. It doesn't however. I know which files need to be replaced, would it be a good idea to just grab the files from the CM9 defy+ build and replace them?
For those that are interested doesn't work = battery only showing full with question mark icon.
Having same problem and seems there is total silence in all forums concerning this issue. If you manage to solve it please let me know !
Hey, guys I'm using MIUI Pikachu Edition by einsteinno1 and it has full DEFY+ support (battery charges up to 100%)
It's overall an awesome ROM, after trying CM7.2, latest WIUI and MS2G v3, Pikachu is the best one for me.
My DEFY+ was on 2.3.5, so I flashed it down to Froyo before flashing Pikachu
Cheers!
I have the same Defy 2.3.5 but I don't know how to install a diffrent ROM/interface ...
iceguy0585 said:
I have the same Defy 2.3.5 but I don't know how to install a diffrent ROM/interface ...
Click to expand...
Click to collapse
Search this wonderful Forum - There are many threads telling you how to install a new ROM / interface
Well then I will definitely give Miui Pikachu edition a try As far as I understand Froyo version is the best to use to flash Miui right ?
Hi all,
About the Defy+ battery. This battery is only support by GB kernel. So nevermind the patch you applied, you'll always have a bad result. This patch works on CM 7.2 Defy + because this rom doesn't incluse the kernel and use the GB one of your phone.
So the only solution is what nisky+ said... Flash before the 2.3.6 SBF on the dev forum who allow you to flash a Froyo kernel first...
http://forum.xda-developers.com/forumdisplay.php?f=855
DeanSebastian said:
Well then I will definitely give Miui Pikachu edition a try As far as I understand Froyo version is the best to use to flash Miui right ?
Click to expand...
Click to collapse
Froyo is the safest way, yes, and it will work without problems. It should work when flashed over 2.3.4, too, but I haven't tried that, myself.
@mdt24 Then how come I don't have battery problems now when Froyo's kernel is used
P.S. It's niksy, not nisky
Hi niksy ;-)
It's because I think this rom doesn't incluse kernel, so you always run a 2.3.4 GB Kernel...
quote from Miui Pikachu edition : IMPORANT!!! this Rom works only on Defy or Defy+ with Froyo Kernel or Gingerbread 2.3.4/5 Kernel. All with 2.3.6 Kernel have to downgrade to Froyo Kernel, because the new Motorola Kernel won't work with MIUI. Just use this Tutorial on XDA Developers
But I could be wrong in my deduction, so Please, can you give us the number of the kernel you have with this pikachu rom ?...
What I did before was downgrade from 2.3.6 using the sbf the dev provided that allows you to downgrade to froyo then I flashed Miui official rom and still had problems with battery. Kernel version currently is : 2.6.32.9gb08c3c8 if that makes any sense to you cause I personally just don't know anything bout kernels... I just downloaded pikachu Miui and will give a try soon and share the results with you
Hey all, thanks for the replies. I already know about the limitations of the patch and which versions the driver works with. That is why i flashed the 2.3.4 kernel before using MIUI and therefore the defy + patch. I just don't get why it doesn't work, do i need to use a defy+ kernel?
I will grab the files used in the working MIUI Defy+ rom and package them as a flashable .zip for other users.
mdt24 said:
Hi niksy ;-)
It's because I think this rom doesn't incluse kernel, so you always run a 2.3.4 GB Kernel...
quote from Miui Pikachu edition : IMPORANT!!! this Rom works only on Defy or Defy+ with Froyo Kernel or Gingerbread 2.3.4/5 Kernel. All with 2.3.6 Kernel have to downgrade to Froyo Kernel, because the new Motorola Kernel won't work with MIUI. Just use this Tutorial on XDA Developers
But I could be wrong in my deduction, so Please, can you give us the number of the kernel you have with this pikachu rom ?...
Click to expand...
Click to collapse
Mate, you are right about the ROM, it doesn't include any kernel, but I said that I flashed that special version 6 Froyo (that's a full sbf) before flashing Pikachu!
DeanSebastian said:
What I did before was downgrade from 2.3.6 using the sbf the dev provided that allows you to downgrade to froyo then I flashed Miui official rom and still had problems with battery. Kernel version currently is : 2.6.32.9gb08c3c8 if that makes any sense to you cause I personally just don't know anything bout kernels... I just downloaded pikachu Miui and will give a try soon and share the results with you
Click to expand...
Click to collapse
The kernel you mentionned is a froyo kernel...
As you all I try to understand why it's possible that the defy+'s battery works or not with the patch. It's sure it works with a 2.3.6 GB kernel and a patch for the system (battd, lib) used by the rom if the new rom doesn't include a kernel.
It seems that if the rom include a froyo kernel the patch doesn't work...
So... may be a way to understand
---------- Post added at 03:56 PM ---------- Previous post was at 03:43 PM ----------
niksy+ said:
Mate, you are right about the ROM, it doesn't include any kernel, but I said that I flashed that special version 6 Froyo (that's a full sbf) before flashing Pikachu!
Click to expand...
Click to collapse
Yes but I'm pretty sure than this special version has a GB kernel. It's just the bootloader who accept all kind of kernel...
Check your Kernel number, I think you must have something like this 2.6.32.9-gbdd614e...
Ok after some testing I can tell you that the battery charged to 100% only the first time I booted.Since then it has only charged till 90%. I also did calibrate the battery the first time I flashed the Rom but no results
mdt24 said:
Yes but I'm pretty sure than this special version has a GB kernel. It's just the bootloader who accept all kind of kernel...
Check your Kernel number, I think you must have something like this 2.6.32.9-gbdd614e...
Click to expand...
Click to collapse
It's 2.6.32.9-gb08c3c8 - the one you said it's Froyo Just checked!
And for the battery... First time it charged to 100%, this time it stuck at 90%. Quite weird... But, that is with Froyo kernel, as we've come to conclude.
But, on the other hand, my bro's got a DEFY+, too, with CM7.2 on it and with Gingerbread kernel (27th January DEFY+ nightly) and the battery goes to 100% every time. I will test Pikachu on a Gingerbread kernel, cause I can't really live with this bug :-/ Will let you know how it went, now I'm off to find a 2.3.4 sbf!
I had the same idea and have already downloaded a full 2.3.4 GB sbf to check just that !
i wish a 2.3.4 GB kernel can fix that, although I think the only kernel able to fix this is 2.3.5 and above
Hi.. I m new to android... I just want to ask how can I add music contol to notification toogle bar like that in cm mod..... I m using pikachu edition on my defy plus and its really great ... I haven't faced any problem till now.. thank u dev for such a beautiful rom...
hey buddy....i was runing on 2.3.5 than i tried a rom called [Retail British] here ; http://sbf.droid-developers.org/umts_jordanplus/list.php
then
i upgreade it by automatic update so it became 2.3.6
then i again flash it through [Retail British] after that my device not able to power on just with white led light but i'm able to flash the device ..so can u suggest me a suitable rom for my device [Motorola defy+] ??
HELP pls
Thanks !!
mdt24 said:
Hi niksy
It's because I think this rom doesn't incluse kernel, so you always run a 2.3.4 GB Kernel...
quote from Miui Pikachu edition : IMPORANT!!! this Rom works only on Defy or Defy+ with Froyo Kernel or Gingerbread 2.3.4/5 Kernel. All with 2.3.6 Kernel have to downgrade to Froyo Kernel, because the new Motorola Kernel won't work with MIUI. Just use this Tutorial on XDA Developers
But I could be wrong in my deduction, so Please, can you give us the number of the kernel you have with this pikachu rom ?...
Click to expand...
Click to collapse
Thanks for ur Info.. tried to install Pikachu edition on my Defy+ 2.3.6 nd failed. But now using CM10..
[Q] hello sir,
Do own Defy+2.3.6 (ryt now using MS2Ginger 3 by walter79 ), want to use CM9/ICS, downloaded zip CM9-NIGHTLY-120112-Defy+.zip & CM9 kernel. kindly suggest proper installation procedure and info abt the ics gapps versions which one to use. i dont want to use other kernal rather than 2.3.6 can i flash CM9 on stock rom
waiting for ur humble replies ☻thanks in advance☻
God bless you All.
Why don't you want to use the Froyo kernel? I wouldn't use this nightly. You can't even phone with it! If you have BL6, flash the BL6-SBF with Froyo-kernel.
Don't use the flashlight until you flashed the CM7-kernel, you could burn it with the Chinese kernel of this SBF.
Then root the phone with the latest SuperOneClick and (after backup) follow my instructions here. Use the latest CM9-zip, ICS-Google-apps and the CM7-kernel(NOT the CM9-kernel) instead of the zips in that post. If you want to have the Motorola-Bootlogo back, also flash the attached Red_M_Logo.zip, or use my CM9-Bootlogo.zip. Flash the CM9-Music.zip if you want to use the new CM9 music app (it's very good, i can recommend it).
If you have BL7, i would wait until eppy makes a build for the Defy+ kernel.
thanks for your replies,
please let me know checking battery version ( bl5,bl6,bl7 ),my defy mfg. date is dec 2011 , details on battery HF5X, b052r984-1001, model L-L-L- DC111109.
and CM9 GB kernel is available so why not to use it, hope u clear my mind.
veeranna said:
[Q] hello sir,
Do own Defy+2.3.6 (ryt now using MS2Ginger 3 by walter79 ), want to use CM9/ICS, downloaded zip CM9-NIGHTLY-120112-Defy+.zip & CM9 kernel. kindly suggest proper installation procedure and info abt the ics gapps versions which one to use. i dont want to use other kernal rather than 2.3.6 can i flash CM9 on stock rom
waiting for ur humble replies ☻thanks in advance☻
God bless you All.
Click to expand...
Click to collapse
defy + wont be able to get update of 4.0 do not even try for this
I have a Defy+ with CM9/ICS, it works!
i think i try flashing it on my stock rom... i think eppsy build for gb builds hope no downgrading is required i guess any suggestions and recommendations are welcome.
WHAT VERSION HAVE YOU FLASHED ?
I mean which build are you using with Defy+ ?
i am using stock 2.3.6 and i tried
stock/cm 7.2 nightly.
stock/ics latest builds
works well but no network on second booted rom doesnt get any network ( no EMIE )
hope some one fix this soon or some one did let me know
veeranna said:
i am using stock 2.3.6 and i tried
stock/cm 7.2 nightly.
stock/ics latest builds
works well but no network on second booted rom doesnt get any network ( no EMIE )
hope some one fix this soon or some one did let me know
Click to expand...
Click to collapse
Did you try using basebandswitcher? Just to search for a frequency similar to your stock baseband? I think you did because default ms2ginger baseband definitely isn't what you seem to be running on stock 2.3.6...
Oh, and btdubs I think Mister Ypsilon is right about using froyo kernel builds for CM9. Your nightly doesn't seem to be too stable.
*EDIT
Oh and veeranna don't forget, BL version (BL5/6/7) is not your battery version. It's the version of the bootloader, and it is very important when it comes to downgradeability.
search it up, I don't do a very good job of explaining bootloader stuff.
Its awesome but lil buggy
I did it! Installed Froyo SBF, rooted, 2nd init, then CM9 for Defy, CM7 kernel, slept at 5A.M :O and bingo there was a pretty stable ICS but without camera! After playing around with it for few hours.. Tested NFS Shift, Angry Birds and everything was smooth as butter except that there was no Camera due to which I restored it back using a full SBF flash and my Nandroid backup
Can be used if you don't need a camera..!
I have a Defy+ flashed with stock 2.3.6 SBF en.asia
http://forum.xda-developers.com/showpost.php?p=20097916&postcount=3
Check this it is working fine. Tested on my moto after a full fresh Defy+ 2.3.6 SBF flash.
There are more stable roms built by quarx and epsylon3 in the defy development thread. Camera works and camcorder works for some users. These devs are geniuses.
Sent from my MB525 using xda premium
First of all, I'd like to thank all you guys for all great work here on XDA, thank you very much!!
I have a Motorola Defy (MB525) with Red Lens and although I've changed the ROM of my Defy many times, I'm still new and I have some questions:
The first ROM I've installed on my Defy, was CM7 (unofficial, ported from Quarx), then changed to MIUI, then came back to CM7 (official) and now, I'm using CM9 (24/Feb) from Epsylon3/Quarx (from this thread http://forum.xda-developers.com/showthread.php?t=1432100 ) and this build is for Froyo Kernel, and, in this same thread, I've read that GB Kernel is better for CM9 and my Red Lens Defy...
My question is: can I flash CM9 for GB (with GB Kernel) and later return to CM9 for Froyo (and Froyo Kernel), or MIUI, or CM7 if I wanted to??
If I flash CM9 for GB (with GB Kernel), can I go back to stock if I need to??
Well, sorry for this noob questions and sorry for my bad english
well, my personal opinion is, that GB is always better for defy with red lens... only reason for froyo is the missing green lense support in gb, i think ...
i also think, that the kernel for these cm9 roms are flashed with an fixed sbf ... so it doesn't matter, what you have as stock system ...
that is no pro-answer, just a few thinks, i've read and hopefully understood ...
the whole romchange of defy is not easy to understand cause of that locked bootloader things and so on ... i also got a crazy problem with my defy+ as you can read in my thread ...
hopefully, we will get the answers we need to get our systems running as good as we like ...
DJ_Synergy said:
well, my personal opinion is, that GB is always better for defy with red lens... only reason for froyo is the missing green lense support in gb, i think ...
Click to expand...
Click to collapse
Does that mean that those of with green lenses won't be able to upgrade to gb kernel if we want our cameras to work? (i mean by the time there's a cm9 stable)
i flashed cm9 feb. 29 release in my green lens defy.. and have camera preview with autofocus on it.. btw i flashed the cm7 kernel.. and i think cm7 kernel is froyo kernel.. cm9 kernel is gingerbread kernel.. anyone can elp me? how to move apps from phone to sd card?
I've found this:
fritolays said:
I packed the two different kernels into clockwork flashable packages.
1. Flash either a nightly or restore a nandroid.
2. Flash either CM7_Kernel-signed.zip or CM9_Kernel-signed.zip; depending on what you've installed.
3. Reboot.
CM7_Kernel-signed.zip
CM9_Kernel-signed.zip
Click to expand...
Click to collapse
in this thread: http://forum.xda-developers.com/showpost.php?p=20148046&postcount=1624
that means that I can go to CM9 (with GB Kernel) and then, if I want/need to, go back to CM9 (with Froyo Kernel) or any ROM based on Froyo Kernel, right??
simonardejr said:
I've found this:
in this thread: http://forum.xda-developers.com/showpost.php?p=20148046&postcount=1624
that means that I can go to CM9 (with GB Kernel) and then, if I want/need to, go back to CM9 (with Froyo Kernel) or any ROM based on Froyo Kernel, right??
Click to expand...
Click to collapse
You're right. I did this and works. Just flash the kernel based on the corresponding ROM and you're good to go.
Hi all,
When I bought my Defy + I installed CM9 (Android 4.0.4),
CM9 switched off everyday, it had few bugs, because it's IMM76D I think..
Then I installed Codename Android (http://forum.xda-developers.com/showthread.php?t=1585905)
It works much better ! Do you think it's the best Android 4 ROM for Defy + ?
Thanks
Did you have to install any battery fixes?
Glad to know its working for you. Though epsilon3 and Quarx have been doing great work there are still a few bugs.
Hey, no :O
I will install CM7 in fact (for the moment) untill a stable verison of CM9
In fact no, Codename is so good, I'll stay with it
Raphael-1427 said:
Hi all,
When I bought my Defy + I installed CM9 (Android 4.0.4),
CM9 switched off everyday, it had few bugs, because it's IMM76D I think..
Then I installed Codename Android (http://forum.xda-developers.com/showthread.php?t=1585905)
It works much better ! Do you think it's the best Android 4 ROM for Defy + ?
Thanks
Click to expand...
Click to collapse
Thats a froyo build.. right?? So you need to flash the froyo kernel..
Sent from my Defy+ using Tapatalk 2
neo.ank said:
Thats a froyo build.. right?? So you need to flash the froyo kernel..
Sent from my Defy+ using Tapatalk 2
Click to expand...
Click to collapse
I don't know sorry im noob..
Raphael-1427 said:
I don't know sorry im noob..
Click to expand...
Click to collapse
Okay.. So you have a defy+ and flashed this ROM
And it works??
I`ve tested a couple of ROM`s (MS2Ginger, MIUI, CM7 e CM9 and a few others)
In Fact, CM9 still a little buggy, but Epyslon and Quarx`s have made a really great work with his nightly`s
At now i`m on Epyslon Defy+ 042812 last nightly with MS2Ginger4.0 running as virtual system in multiboot and i really love it
Raphael-1427 said:
Hi all,
When I bought my Defy + I installed CM9 (Android 4.0.4),
CM9 switched off everyday, it had few bugs, because it's IMM76D I think..
Then I installed Codename Android (http://forum.xda-developers.com/showthread.php?t=1585905)
It works much better ! Do you think it's the best Android 4 ROM for Defy + ?
Thanks
Click to expand...
Click to collapse
neo.ank said:
Okay.. So you have a defy+ and flashed this ROM
And it works??
Click to expand...
Click to collapse
Yes
KriegerBread said:
I`ve tested a couple of ROM`s (MS2Ginger, MIUI, CM7 e CM9 and a few others)
In Fact, CM9 still a little buggy, but Epyslon and Quarx`s have made a really great work with his nightly`s
At now i`m on Epyslon Defy+ 042812 last nightly with MS2Ginger4.0 running as virtual system in multiboot and i really love it
Click to expand...
Click to collapse
Oh nice your Rom is better than mine ? It's Android 4 ?
I have not tested this ROM yet, so i can`t compare it.
Epy`s last nightly defy+ smoothy than others... I think this ROM also very fast, with no FC, no random reboot until now and i`ve noticed a better performance to play some games too (GTA3 with no lags LOL). Video bug still remains (Video works fine in defy bayer camera with Epyslon CM9 4.0.4 042812 MB525 nightly) but this doesn`t problem for me now, cause with MS2ginger4 i have video 720p record and panorama (thank`s to Walter79)...
ps: Sorry my "buggy" english!
Raphael-1427 said:
Yes
Oh nice your Rom is better than mine ? It's Android 4 ?
Click to expand...
Click to collapse
_______________________________________
Defy MB525 Bayer camera
Epyslon 042812 DefyPlus nightly + MS2ginger4.0 in multiboot
Oww it looks nice, where can I found the same ROM as you please ?
CM9 ROM`s Quarx`s and Epyslon in this thread: http://forum.xda-developers.com/showthread.php?t=1432100
MS2Ginger4.0 by Walter79 here: http://forum.xda-developers.com/showthread.php?t=1140839 (PS: This ROM doesn`t boot as virtual system when used with froyo kernel (CM7) for me :/ With GB kernel CM9 works fine )
Raphael-1427 said:
Oww it looks nice, where can I found the same ROM as you please ?
Click to expand...
Click to collapse
KriegerBread said:
CM9 ROM`s Quarx`s and Epyslon in this thread: http://forum.xda-developers.com/showthread.php?t=1432100
MS2Ginger4.0 by Walter79 here: http://forum.xda-developers.com/showthread.php?t=1140839 (PS: This ROM doesn`t boot as virtual system when used with froyo kernel (CM7) for me :/ With GB kernel CM9 works fine )
Click to expand...
Click to collapse
Omg too hard for me xD
You have 2 ROM ? Why ?
Raphael-1427 said:
Yes
Click to expand...
Click to collapse
Thats really strange.
Can you tell me your stock version information, If you remember..
I use two ROM`s in multiboot cause i wan`t ICS 4.0.4 and 720p video recorder + panorama in the same device
Raphael-1427 said:
Omg too hard for me xD
You have 2 ROM ? Why ?
Click to expand...
Click to collapse
______________________________________
Current phone: Defy Bayer Camera
Android: Nightly 4.0.4 Epsylon3 DefyPlus 04/28/2012 in multiboot with MS2ginger4[/B]
KriegerBread said:
I use two ROM`s in multiboot cause i wan`t ICS 4.0.4 and 720p video recorder + panorama in the same device
______________________________________
Current phone: Defy Bayer Camera
Android: Nightly 4.0.4 Epsylon3 DefyPlus 04/28/2012 in multiboot with MS2ginger4[/B]
Click to expand...
Click to collapse
Ah ok i understand now tanks, your CM9 is the laggy one?
neo.ank said:
Thats really strange.
Can you tell me your stock version information, If you remember..
Click to expand...
Click to collapse
Sorry I didn't see your message, what is the french for Stock Version please?
Today at morning i flashed cm9 Quarx`s nighty for defy+ (Video recorder works great. Only panorama not not working) The rom is very smooth and stable, with no reboot. So I dont need MS2ginger in multiboot anymore
Take a loook in the Quarx`s defy+ last nightly (Only if defy red lens or defypplus, off corse!)
Ps: CM9 nightylies works better with Defy red/Defy+ - 4.5.2-109_DHT-22 kernel than CM9 Kernel
Good luck!
Raphael-1427 said:
Ah ok i understand now tanks, your CM9 is the laggy one?
Sorry I didn't see your message, what is the french for Stock Version please?
Click to expand...
Click to collapse
____________________
Defy Bayer Camera
Quarx`s 042912 Defy+ nightly @1000mhz
Walter79 Defy red/Defy+ - 4.5.2-109_DHT-22 kernel
KriegerBread said:
Today at morning i flashed cm9 Quarx`s nighty for defy+ (Video recorder works great. Only panorama not not working) The rom is very smooth and stable, with no reboot. So I dont need MS2ginger in multiboot anymore
Take a loook in the Quarx`s defy+ last nightly (Only if defy red lens or defypplus, off corse!)
Ps: CM9 nightylies works better with Defy red/Defy+ - 4.5.2-109_DHT-22 kernel than CM9 Kernel
Good luck!
____________________
Defy Bayer Camera
Quarx`s 042912 Defy+ nightly @1000mhz
Walter79 Defy red/Defy+ - 4.5.2-109_DHT-22 kernel
Click to expand...
Click to collapse
oww ok realy nice thanks i'll try this tomorrow
Raphael-1427 said:
Sorry I didn't see your message, what is the french for Stock Version please?
Click to expand...
Click to collapse
it should be like
Code:
la version d'usine
If you remember..
neo.ank said:
it should be like
Code:
la version d'usine
If you remember..
Click to expand...
Click to collapse
Thanks ^^ When I bought it it was Android 2.3.6
Raphael-1427 said:
Thanks ^^ When I bought it it was Android 2.3.6
Click to expand...
Click to collapse
Thats really amazing.. This phone is actually a weird piece.
Technically 'Codename Android' is incompatible to your defy+ and should give you bootloops. But here you are and its working.
Im using Cm7.2 absolutely stable..
Now i wish to update to a new version !!
cm9 is stopped and cant find download link
cm10.1 is on progress....
or any AOSP Stable ICS/ JB ?
Basically i need a stable one for max daily usage with max battery ... i use internet and games rarely
and whats this thread contains.. many ROM names and which one are for DEFY !!
http://forum.xda-developers.com/showthread.php?t=1824551
CM9 is the best option for you. Go to uncledan's android mirror to get CM9
I'm using CM10 27/05 but it does have few bugs.
All the roms on that thread are for the Defy and Defy+.
hotdog125 said:
CM9 is the best option for you. Go to uncledan's android mirror to get CM9
I'm using CM10 27/05 but it does have few bugs.
All the roms on that thread are for the Defy and Defy+.
Click to expand...
Click to collapse
Quarx' CM10 18/03 was pretty stable, no bugs at all for me. 27/05 is considerably faster though. I'd say CM10 is a safe bet as it's quite mature by now. Be aware that some of these builds are marked as experimental (the ones with the red colour)
I am using Quarx' CM10 17/2 with Blechdose 22/3 Jellyx kernel... It's very smooth and stable
thanks you all...(i mean it)
decided to try cm9 ...
downloaded the last one from http://defy-cm.net/defy-cm9-nightly/ (its Quarx)
flashed the OS , its gr8 for now. will update soon .
Going to install basebandswitcher 4.
and also battery calibration tool after a full recharge !!
inbetween one dbt ..im using a DEFY mb525 .(prev os was cm7.2). So my kernel will be a FROYO One . R8?
Should i install GB kernel for better performance ...?
cm9 of Quarx Vs cm9.1 of epsylon
like i said i installed Quarx cm9
now found a cm9.1 by epsylon http://forum.xda-developers.com/showthread.php?t=1353003
anyone tried this !!
v2dare said:
like i said i installed Quarx cm9
now found a cm9.1 by epsylon http://forum.xda-developers.com/showthread.php?t=1353003
anyone tried this !!
Click to expand...
Click to collapse
Yes, there's not much of a difference. You don't need to install any kernel.
But in this thread it shows i need to flash kernel
http://forum.xda-developers.com/showthread.php?t=1618904
r8 now my phone shows kernel as 2.6.32.9-gb ....
got kernel-gb-234-451-134-signed.zip from http://defy.wdscript.fr/kernel/
Before that my Questions are
should i update the KERNEL .. its some threads its shown Kernal Update is necessary ...
hotdog125 said:
Yes, there's not much of a difference. You don't need to install any kernel.
Click to expand...
Click to collapse