Related
Okay, I was on the latest Wolfbreak, but I had a major, bootlooping crash, and had to return my device to stock:
1) i downloaded and installed the firmware from here:http://forum.xda-developers.com/showthread.php?t=1054818 but before rebooting I
2) used the firmware downgrade from here to stock .54: http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband in a similar fashion to getting wolfbreak on in the first place: recovery to install firmware, pull battery, flashtool, flash baseband/kernel package. i then
3) followed these instructions to fix the build.prop http://forum.xda-developers.com/showthread.php?t=824711 to rogers black.
I did not run the master uninstaller from 1 because i use root a lot. however, it seems now that the phone won't save the 3g network settings for longer than about 5 minutes. it keeps prompting to download, then i can get online briefly, then it says "failed to download" and i'm just a phone again.
I've tried repairing through PC companion and it says there's no software for my phone.
Can you help? I've tried just launching the browser and having it download, as well as going through settings, sony ericsson, etc. Its almost like some necessary file is R/o and not being written with the new info. Any suggestions?
Info:
model: x10a
firmware: 2.1-update1
baseband: 2.1.54
[email protected] #1
build:2.1.a.0.435
Update: Same results on .55
trying instructions from http://forum.xda-developers.com/showthread.php?t=1087881
will update if no fails...
Ok, I'm in a real fix here. I have an LG Optimus One P500. As you might know, the stock P500 (2.2 FroYo) came with a baseband 0.32, and once you updated it to stock Gingerbread (2.3.3), you got a .35 baseband.
I used this guide to try to switch to the old baseband (.32) because most of the ROMs that have been developed support that baseband.
In the guide, I followed the instructions, and the software automatically created an .NV2 backup file. However, when it came to RESTORING that file, I got an error, saying failed. Now in the guide, they said this was curable, as long as I disabled the LGE Virtual Modem, which I did. At the time, my phone was in Emergency Mode (Yellow screen with text "Emergency Mode! ). Here's where (I think) I went wrong:
I disabled the Virtual Modem, and then pulled out the battery from my phone and rebooted, I tried running the Program again, but got the same error. I tried rebooting my PC and trying again, again same error. I also tried going into Emergency Mode and trying again, this time it said NV backup not found.
Please help me, I have no bluetooth, no FM radio, and most importantly NO GSM
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
The same problem exactly!!! And I do all reset severel times! Help us!!!
Garri1980 said:
The same problem exactly!!! And I do all reset severel times! Help us!!!
Click to expand...
Click to collapse
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
moustafaatchy said:
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
Click to expand...
Click to collapse
-i did that also sir but the problem persist..
moustafaatchy said:
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
Click to expand...
Click to collapse
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
ian_drimworld73 said:
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
Click to expand...
Click to collapse
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
moustafaatchy said:
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
Click to expand...
Click to collapse
-0x1
ian_drimworld73 said:
-0x1
Click to expand...
Click to collapse
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
moustafaatchy said:
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
Click to expand...
Click to collapse
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
arinsms said:
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
Click to expand...
Click to collapse
-I did that several times sir. still no luck
Hey, did you burn plywood the correct version of rum for your device? Moreover, you must make fool wipe, what version you had before making the root? That if there is a 4.3 to try to go back to 4.4.2
Sorry for bed English
Sent from my SM-N900 using XDA Free mobile app
ian_drimworld73 said:
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
Click to expand...
Click to collapse
You said you tried updating the firmware of your region and the problem persists .. You should let someone flash the software using a BOX (not just using odin) (preferably go to Samsung)
if it's not solved then it's most probably a hardware problem .. I didn't drop my phone either but that's not necessary
Same problems with my n9005
ian_drimworld73 said:
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
Click to expand...
Click to collapse
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
solved mine
pisicutumic said:
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
Click to expand...
Click to collapse
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
NEWS
ian_drimworld73 said:
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
Click to expand...
Click to collapse
I saw now the CSC is XSP this is the only prb but also is csc free no bloatware.also you can root back again and you can restore your old settings except :
1. CSC settings and APP settings that camed with your original firmware
2. when insert your sim back you will be notified to update internet settings to your provider ( for me Vodafone RO) , you can change them back to google.com . is ok THX for your apreciation.
Lenovo Yoga Tablet 2 830F - Android 5.0.1 - Lollipop ota update 2 from Lenovo (20/7/15)
Filename: YT2-830F_USR_S000195_1504220230_WW21_ROW_TO_YT2-830F_USR_S100067_1507101258_WW52_ROW.zip
Size: 1,15 GB
Link: https://drive.google.com/file/d/0B1j7Qr4n1Z15U3pXMTdNdHRfd1E
INFO !!!
My first update OverTheAir with this file was a fail. Only black screen after update and reboot.
(I think because i did not change the country code after flashing KitKat a few weeks ago)
(If the update stuck at 100% in recovery you also have to reflash KitKat ROM)
So i flashed original 830F KitKat ROM via "PhoneFlashTool" with this ROM / Tutorial:
https://cloud.mail.ru/public/Z2US9gd..._150422_ROW.7z
http://www.android-hilfe.de/thema/tutorial-wie-installiere-ich-das-kommende-update-wenn-es-nicht-funktioniert-fuer-alle-varianten.697884/
Changed the "Country Code Setting" via ContactApp ####6020# to "de" (select your language).
And do not update any app like Chrome etc. when it reboots again after.
Then download and start the Lollipop 5.0.1 Update.
Lollipop upgrade reboots into recovery and stays 5min. at 100%.
Then reboots into some intel-flash mode and stays for 4min.
After it reboots into Lollipop OS... :cyclops:
INFO 2 !!! (if you installed Lollipop update 1 first and now restoring/flashing of KitKat ROM fails)
matshias said:
I have the same problem, only that I had the first Lollipop version for 1050F with root and then got the new Lollipop update. The Kitkat version fails to flash. But here is what helped: Go to this post http://forum.xda-developers.com/thi...-8-10-13-3-t2930428/post60490907#post60490907
and download the LtoKKxml.7z and copy the files into the kitkat firmware folder and then flash using flash-LtoKK-PVT-810.xml
I had to remove the parts of the XML that erase and format data. Then it worked
After that I could flash KitKat!!
Click to expand...
Click to collapse
LOLLIPOP ROOT
So easy, follow steps 1-8: http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
I download "IntelAndroid-FBRL-05-16-2015-PTR.7z" and "UPDATE-SuperSU-v2.46.zip" and it worked with Lollipop 5.0.1.
Make sure you have all the Android, Intel, ADB driver stuff installed (for me win7 installed another one at rooting?)
!!! USE OPTION T4 FOR LOLLIPOP ROOT !!!
.
5m00v3 said:
2 hours ago i`ve just received the new official Android Lollipop Update from Lenovo via System-Upgrade!
Filename: YT2-830F_USR_S000195_1504220230_WW21_ROW_TO_YT2-830F_USR_S100067_1507101258_WW52_ROW.zip
Size: 1,15 GB
Country: Germany
I have made a copy from the ZIP and can upload, if someone point me to an fast and simple upload-service...
I install now and report soon...
Click to expand...
Click to collapse
Yup I got the notice a few mins ago. I also got it many weeks ago when it bricked my yoga 2 8.3
Advice, when it says Updating....100%. Leave it alone. Last time I thought it was done since it said 100% for many many minutes. So i thought it was stuck or bricked. Just let it sit. It will reboot by itself and restart to the next phase.
It will also sit on the Lenovo android screen for quite a while before it goes to Android is upgrading.
Yes, i got problems too!
- It stays for 8min. at 100%. I leave it alone...
- Then 4 chinese Buttons showed up.
- I pressed the first (reboot i think)
- it reboots, it shows the white lenovo text, then black screen with background light on.
- i waited 10min., no change or start into OS.
- then i pressed 15sek power off, light goes off.
- if i power on, again white lenovo text, then black screen with background light on. nothing... ???
i reboot into recovery and wiped cache, nothing.
i think i will make update from SD card again... see if something happend
Update again from SD dont work! it says:
"/system/app/Chrome.apk" has unexpected contents...
E: Error in /sideload/package.zip
SUCCESS, LOLLIPOP IS WORKING!!!
I Have restored original KitKat ROM via "PhoneFlashTool" with this ROMs / Tutorial:
https://cloud.mail.ru/public/Z2US9gd6f2ei/YT2-830F_S0195_150422_ROW.7z
http://www.android-hilfe.de/thema/t...icht-funktioniert-fuer-alle-varianten.697884/
This time i´ve made the "Country Setting" via ContactApp ####6020# to "DE" befor download and upgrade!
And i have aborted the automatic PlayStore updates for Chrome etc...
Lollipop upgrade reboots into recovery and stays 5min. at 100%.
Then reboots into some intel-flash mode and stays for 4min.
After it reboots into Lollipop OS...
So can you boot back into android? Even after you wiped it? If not and you can't do anything, call Lenovo. I think only they can fix it.
If you can get back into android, I would suggest waiting for the System update notice. That's what showed up this morning for me. I didn't have any chinese buttons. I didn't have to touch anything, just wait for a really long time which is unnerving because I don't know status.
I flashed the KitKat Version again, changed country code, and installed the new Lollipop 5.0.1 update again.
This time there are no chinese buttons to press. (i think because changing the country code befor update).
Lollipop is great, the display is much faster while scrolling in chrome etc.
Interesting. I wonder what the difference between the versions of the country codes are. Mine bricked last time it was updated to lollipop. When I got the repair back, it was back to kitkat and I couldn't update until this morning.
Glad to hear you got it fixed. A few of my apps also stopped working and I had to clear the cache to get it working again after the update.
There are some differences in pre-installed apps. I did not changed the country code few weeks ago because there are some apps in german setup i do not want...
**** Edit *****
Added a Link on top
Added ROOT on top
mine is failing on Lenovo Recovery. It will go to 100% and failed. I had to reboot. FYI, mine is rooted.
sdho said:
mine is failing on Lenovo Recovery. It will go to 100% and failed. I had to reboot. FYI, mine is rooted.
Click to expand...
Click to collapse
You need to flash the stock kk firmware.
http://forum.xda-developers.com/showthread.php?p=61955463
From my LG-G3 running Jasmine8.0/Skydragon Kernel 4.2
Yes, It looks like I cannot just upgrade from rooted KK. I had to go back to stock kk firmware provided in the OP's link and follow step by step instructions using google translate. thanks workdowg and 5m00v3.
anyone missing 5GHz band Wi-Fi support with country code DE? I cannot seem to change the country code once it has been upgraded to Lollipop.
sdho said:
anyone missing 5GHz band Wi-Fi support with country code DE? I cannot seem to change the country code once it has been upgraded to Lollipop.
Click to expand...
Click to collapse
Lollipop does not longer provide the option to manual change band... it will auto connect to 5ghz if possible.
It has nothing to do with country code DE. You can check your connection 2,4/5ghz with the app "wifi band".
My YT2 connects automatic to my 5ghz. And i have 2 networks (2,4 + 5ghz) with same networkname.
Hi,
I have the same problem, black screen after OTA Update, but now, impossible to acces to recovery, dirrectly a black screen after "Lenovo" logo, have you an ideas ?
thanks
---------- Post added at 02:10 PM ---------- Previous post was at 01:58 PM ----------
Eagledig said:
Hi,
I have the same problem, black screen after OTA Update, but now, impossible to acces to recovery, dirrectly a black screen after "Lenovo" logo, have you an ideas ?
thanks
Click to expand...
Click to collapse
Okay, I found the solution ! Make the tablet totaly Off, press volume up and volume down, than press power bouton, you directly acces to fastboot mode, and here you can flash with Phone Flash Tool.
Hi,
thanks for the timming TIPs !!
I can't believe LENOVO dosen't take care of this basic things !!
Thanks to you Lollipop is running on my beloved Yoga.
A little tip while we are avaiting 5.1,
Go in Parameter
Activate DEV options : About this tablet, touch 7 times on "Build Version", it will activate the Developper Menu in parameters
Go to Developpers Option (in PArameter)
UNCheck NuPlayer in multimedia.
--> REBOOT your device
It will allow you to avoid Lagging into the UI and apps.
Note that in 5.1 NuPlayer has been replaced by a bugfree version.
Now my last issue is to root the Lenovo...
I tried the rooting method : http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
but aleas I'm stick with an ugly : E: failed to verify whole-file signature
when trying to apply latest SuperSu when in recovery mode...
Tried with stock 2.46 and BETA 2.49.... same result.
Your help is kindly requested to solve this....
pregis said:
Now my last issue is to root the Lenovo...
I tried the rooting method : http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
but aleas I'm stick with an ugly : E: failed to verify whole-file signature
when trying to apply latest SuperSu when in recovery mode...
Tried with stock 2.46 and BETA 2.49.... same result.
Your help is kindly requested to solve this....
Click to expand...
Click to collapse
Googling ”E: failed to verify whole-file signature" and each one talks about a corrupt download... They are old posts from 2013 or so but they could be right.
Try this version 2.40. You can update in the Play store once your rooted.
https://www.dropbox.com/s/0xbu7ve3haha8gw/UPDATE-SuperSU-v2.40.zip?dl=0
Sent from my YOGA Tablet 2-1050F
Thanks for your help.
I tried the 2.40 version triple check the zip file, aleas same error...
Also there are not only corruptions problems related... some are related to CMW version problem and lack of "unsign" option..
Again thanks for the 2.40 link. If you have any suggestion I'm all ears.
There is a new update, to yt2-830f_usr_s100191_1511230623_ww52_row
anyone tried it already?
Looks like it requires going back to stock KitKat again just to update it.
Can't really be bothered trying it.
Huawei P8 LITE - ALE-L02
Hey guys, I am in New Zealand and I rooted my phone successfully.
I then got an update so I unrooted and when I tried to install it kept saying something like "Install failed".
So I did a factory reset using the power+volume up method. This put the phone into a boot-loop of the intro graphic.
This problem was possibly to do with me trying to remove the root access unsuccessfully with SuperSU and then doing it with the app Universal Unroot.
I have managed to install the stock ROM now which works fine. But my model number has changed from ALE-L02 to hi6210sft.
And the build number is stated as BalongV100R001C50B311.
I can use the phone as is but the GUI is a little different and I cannot install things like CWM as this random model number I now have is not support.
So I'm a little unsure if it is working correctly.
Any help is much appreciate Thanks in advance
Vince