Database Users

'Splodge' on screen

Splodge, was the only way I could describe it...take a look at the attached photo.
I'm certain I have seen someone else post this before.
It just happened randomly! Was fine all day yesterday, then picked my phone up to answer it last night, and after the phone call had ended I saw this on the screen...
Touch screen still works, and you can still see underneath it, its less visible when the back light is on. Of course when it's off, you can see the effect it has!
So...what is it? Easily fixed or what?
Like I said, I'm sure I have seen this posted by someone else before...

Hehe... nice one. It will most likely disappear if you gently pull the glass with a suction cup.
Brgds... /Tubgirl

Suction cup thing works but then it comes back.
HTC said it would be out of warrenty :S and they would have to look at it first.
O2 however, said if its in warrenty (which it is) then they will get it repaired and supply a courtesy handset while they have it.

i had one the same size it has slowly gone to half the size 5 pence piece but o2 said its not under warrenty and i work for a major phone retailer and my repairs guy said it may so im very unsure wuld have re flash it as its hspl grrr

Some background info on the topic: http://en.wikipedia.org/wiki/Newton's_rings

greg1fraser said:
i had one the same size it has slowly gone to half the size 5 pence piece but o2 said its not under warrenty and i work for a major phone retailer and my repairs guy said it may so im very unsure wuld have re flash it as its hspl grrr
Click to expand...
Click to collapse
interesting, well I'm taking it to the O2 store next week, so will see what they say, will keep the email i had off them saying they will as backup!
It has reduced in size, but still has the rainbow pattern in the middle.

I had a similar screen problem however it didnt look anywhere near as bad as yours. Mine had slight discolouration mostly noticable on white backgrounds. Pressing the screen a little bit harder than normal created the sort of effect you get when pressing the screen of a calculator (dont know what to call it) I took mine to the o2 shop with a different fault and also mentioned this fault. I got it back 6 days later but they hadnt fixed the screen problem. I sent it off again then and there and 6 days later i got a new phone.

O2 now have my HD2
Been given a nasty old Nokia phone as a temp...forgot how small some screens are...lol
should take 7-10 days they said...so fingers crossed...

Any way of fixing this problem without sending it back as this has happened to my cousins HTC HD2, kind of glad it didn't happen to mine lol, any quick fixes to know about?

I've had the same with my HD2.
They fixed it for me (new screen)

Don001 said:
Any way of fixing this problem without sending it back as this has happened to my cousins HTC HD2, kind of glad it didn't happen to mine lol, any quick fixes to know about?
Click to expand...
Click to collapse
Get hold of a replacement screen and do it yourself??

MalekoUK said:
Get hold of a replacement screen and do it yourself??
Click to expand...
Click to collapse
Was actually thinking about this, then tried to figure out how it happened, he goes it was one of two things, since he considers himself a bit of a playboy lol, he tells this tale of a girl sitting in his lap and it happened or could have been wetness (kind of goes hand in hand don't you think lol).. how does this problem usually occur?

Don001 said:
Was actually thinking about this, then tried to figure out how it happened, he goes it was one of two things, since he considers himself a bit of a playboy lol, he tells this tale of a girl sitting in his lap and it happened or could have been wetness (kind of goes hand in hand don't you think lol).. how does this problem usually occur?
Click to expand...
Click to collapse
LOL!
Well anyway! For me it was very random. The phone was fine all day at work, I had a phone call in the evening, after the phone call I just looked at my phone, and there it was...
Some people have said its caused my the heat of the battery and signal, dunno.
Its a very thin space between the battery and the back of the screen, so maybe thats true.
I can't see how over pressure can cause it as its a glass screen, and glass doesn't bend like plastic.

I had a smaller of these newton rings at the center. Much smaller than yours.
Suddenly one day it disappeared.
It was during summer and I thought it was probably because of the heat.

MalekoUK said:
LOL!
Well anyway! For me it was very random. The phone was fine all day at work, I had a phone call in the evening, after the phone call I just looked at my phone, and there it was...
Some people have said its caused my the heat of the battery and signal, dunno.
Its a very thin space between the battery and the back of the screen, so maybe thats true.
I can't see how over pressure can cause it as its a glass screen, and glass doesn't bend like plastic.
Click to expand...
Click to collapse
Interesting, he did always complain about his battery overheating or when on a phone call, the phone temperature increases rapidly, guess that was the cause, at least I get to tell him some good news, he can go to spearmint rhino as much as he wants lol

Just tracked the repair on line and all sounding good!
Job Fault: Defective On-Screen Keyboard
Job Status: On it’s way back
Repair Outcome: Warranty Repair

MalekoUK said:
Just tracked the repair on line and all sounding good!
Job Fault: Defective On-Screen Keyboard
Job Status: On it’s way back
Repair Outcome: Warranty Repair
Click to expand...
Click to collapse
Congratulations.. how long did it take to come back?

Don001 said:
Congratulations.. how long did it take to come back?
Click to expand...
Click to collapse
Hasn't arrived at the store yet, waiting for a phone call, fingers crossed for today! that would be exactly a week.

Hope its fixed soon for you, its interesting about the battery and heat, my hd2 gets warm below the battery and that is also below the main area your problem is on, I suspect its down to a screen fault myself.

MalekoUK said:
Hasn't arrived at the store yet, waiting for a phone call, fingers crossed for today! that would be exactly a week.
Click to expand...
Click to collapse
Hopefully because I know how it feels like to be without the beloved HD2, I had to last two weeks, no matter what phone you use as a substitute, for some reason, it just cannot compare!

Brand new SGS2, screen defect

I just took delivery of my SGS2 yesterday, and I gotta say I absolutely love this phone. Coming from an LG eXpo with WinMo 6.5 and never having used Android, it doesn't even feel like a phone. Plus with all the easy integration with my Google accounts, I've never had a smoother transition to a new device before. All this makes it all the more difficult for me to have to send it back...
I'm not sure if anyone else has encountered this problem, but it looks like my phone came pre-packaged with burn in or something in the form of a dark circle near the upper right side of my screen. I've attached some photos of what it looks like.
I noticed this abnormality in the first 10 minutes or so of using the phone while looking at some photos on my Picasa account. I almost feel like this phone could have been a refurb unit, or the screen was reused or something. In fact, there appears to be more substantial burn in than I can photograph, as there are several other places where I can see strange distortions. Most, if not all, only show up when the brightness is less than 100%. I'd thought maybe it was some widget that caused the burn in, but I haven't been able to figure out which one it could be.
Anywho, I've already arranged an RMA thru Expansys-USA, and they did so without even asking any questions after my email with photos of the problem. So far I've received amazing support from Expansys-USA and definitely recommend them. Also going to see if I can request a replacement sent before I send back this one so I won't be without a phone during the shipping time, something they mention is possible in the RMA email (though they do charge you for it, to be refunded once they get the defective unit back and inspect it).
Would be interesting to see if anyone else has this problem. If there's already another post on this subject, sorry about this new one... didn't see any when I searched tho.

I can see the same thing on mine if I put it on the lowest brightness setting and display a grey image. Nowhere near as pronounced as on yours though, have to really really look for it, so can't be arsed to do anything about it.
Interesting that it's a perfect circle though, could it be just above the CPU or something?

Nope, haven't got that circle on mine at all.

Maybe an assembly worker lost their wedding ring, lol...
You'll be fine, it's an RMA for sure!

Defo a faulty phone
Sent from my GT-I9100 using XDA App

I believe that mark is from the vacuum suction cup on the assembly line from the automated machine that handles positioning the display component. It technically should disappear over time, but I don't know how long.

I don't think it's the CPU, though to be honest I'm not sure where it is under the screen. There is that odd gold-colored sensor or whatever under that area, I think.
If it's a wedding ring, maybe this phone's worth more than the sticker price! haha
Vacuum cup huh... that's pretty bad if it's damaging the screen while doing that. I don't want to wait and see if it will disappear. If I do wait and it doesn't go away I'll be out $725 on a phone with a screen that'll constantly bug me.
Kinda funny, as I was looking at the photos I attached, I saw two rings... one in the photo, and the real one. Startled me when I first saw it.

I didnt have the same problem as you but i had line banding or something on my one.. i had to replace it 4 times then noticed it overheated+smell coming from it.. so i just returned it and got my money back.
Just be aware that you might get another faulty phone.. If i was you i would wait till it comes out in the US.

That sucks, and it's not good that other people are having some issues as well. Good to hear that Expansys is honoring their agreements though

This is why I don't import anymore

RogerPodacter said:
I believe that mark is from the vacuum suction cup on the assembly line from the automated machine that handles positioning the display component. It technically should disappear over time, but I don't know how long.
Click to expand...
Click to collapse
Could well be spot on. I don't know if I'm imagining this, but I'm having more and more trouble seeing this ring on my display heh (had the phone for 9 days now).

RedBlueGreen said:
I didnt have the same problem as you but i had line banding or something on my one.. i had to replace it 4 times then noticed it overheated+smell coming from it.. so i just returned it and got my money back.
Just be aware that you might get another faulty phone.. If i was you i would wait till it comes out in the US.
Click to expand...
Click to collapse
Man, that's really unlucky! Knock on wood, I hope I don't get another bad one. However I'm not sure waiting will do me much good. History has shown me that branded devices tend to have a lot of crap on them and lack certain features at times, and I don't have as much time as I used to to keep up with the scene to make the phone operate better all the time. Also, I'm contract-free with unlimited data on AT&T, and I don't like being locked into contracts. This isn't my first non-US phone, though. I'm happy to pay the extra money so long as it means I don't have to sign a contract.
drleospaceman said:
This is why I don't import anymore
Click to expand...
Click to collapse
From the Expansys-USA thread, sounds like they'll ship the phone back to the UK to have it serviced for you if it ever goes bad. This doesn't sound uncommon, either, as I've had a friend here ship his JP Xbox 360 back to Japan to have it serviced (with a another friend's JP address), and another friend in Japan had his laptop sent back here to have it serviced. Also, there's always the chance a non-import one will be bad, too. Luck of the draw, I guess, and perhaps early-adopter woes. lol

Got my replacement on Saturday, been playing with it ever since to see if I could find any further problems. Definitely no circle this time around, and some of the vertical banding I saw on my old phone in the notification screen is gone, but now has some very slight horizontal banding. Not a deal-breaker tho, so this one's staying with me. Also, hard to tell but I think the yellow/dark left screen problem is present, but so slight I can barely detect it if it's there and not a trick of the eye.
Gotta thank Expansys-USA for their great customer service. I'll definitely order from them again.

-Tj- said:
I just took delivery of my SGS2 yesterday, and I gotta say I absolutely love this phone. Coming from an LG eXpo with WinMo 6.5 and never having used Android, it doesn't even feel like a phone. Plus with all the easy integration with my Google accounts, I've never had a smoother transition to a new device before. All this makes it all the more difficult for me to have to send it back...
I'm not sure if anyone else has encountered this problem, but it looks like my phone came pre-packaged with burn in or something in the form of a dark circle near the upper right side of my screen. I've attached some photos of what it looks like.
I noticed this abnormality in the first 10 minutes or so of using the phone while looking at some photos on my Picasa account. I almost feel like this phone could have been a refurb unit, or the screen was reused or something. In fact, there appears to be more substantial burn in than I can photograph, as there are several other places where I can see strange distortions. Most, if not all, only show up when the brightness is less than 100%. I'd thought maybe it was some widget that caused the burn in, but I haven't been able to figure out which one it could be.
Anywho, I've already arranged an RMA thru Expansys-USA, and they did so without even asking any questions after my email with photos of the problem. So far I've received amazing support from Expansys-USA and definitely recommend them. Also going to see if I can request a replacement sent before I send back this one so I won't be without a phone during the shipping time, something they mention is possible in the RMA email (though they do charge you for it, to be refunded once they get the defective unit back and inspect it).
Would be interesting to see if anyone else has this problem. If there's already another post on this subject, sorry about this new one... didn't see any when I searched tho.
Click to expand...
Click to collapse
I too have this issue at the bottom left of my screen, But i donno how to go about it, should i go ahead and ask for a replacement?? what did u do
Hardly noticable though

Tj,
I too have this issue at the bottom left of my screen, But i donno how to go about it, should i go ahead and ask for a replacement?? what did u do
Hardly noticable though

I would have it exchanged for another if you can. I had mine exchanged, but since I went with the cheap option the whole ordeal took almost a month (slow shipping). My replacement doesn't have a defect, but it's possible I have the yellow tint problem others have been reporting. I don't see it tho, and if it's there it doesn't bother me.
Sent from my GT-I9100 using XDA Premium App

[Q] So i finally got my Transformer, but somethings not right.

Ok, so i open it up, and whammo. Like a punch in the face:
http://www.youtube.com/watch?v=wlwzcB6_px0
What's wrong with my transformer? Defective? Do i have to return it?
Kind of dissapointed right now

I'd return it right away

catolh said:
Ok, so i open it up, and whammo. Like a punch in the face:
http://www.youtube.com/watch?v=wlwzcB6_px0
What's wrong with my transformer? Defective? Do i have to return it?
Kind of dissapointed right now
Click to expand...
Click to collapse
i've never seen anything like that.
screen defect, i'd say.
RMA (unless somebody else knows better).

I have requested a return from the store, i hope it goes quickly. The lines seem to change after each boot. Sometimes the ones you see on the vid, and sometimes just extreme flickering lines.
It kind of reminds me of artifacts on a overheated graphics card
Here is another one showing extreme flicker:
http://www.youtube.com/watch?v=WQaNDtpu3zc

looks like GPU is dying. Ive seen similar stripes on XPS M1330

TURNSKIN said:
looks like GPU is dying. Ive seen similar stripes on XPS M1330
Click to expand...
Click to collapse
Crazy stuff, happening on a new, just opened device.
Pretty dissapointed at the moment

Looks the same as a partially broken laptop screen looks when its been dropped etc
Return it before they think you have had it long enough to have done it yourself

That is either the GPU or the video RAM failing, NOT a screen issue.

I would just exchange it at the store, make sure to tell them that it was like that when you opened it. Sometimes you'll get smartasses that will try to say you broke it, and that you're trying to get rid of it, even though it's obvious that you couldn't of done that. RMA would be too long of a wait, and they'd probably send you a new one anyways.

I'm no expert, but it looks like how my old laptops look when the flat ribbon connector to the LCD starts to break. Sometimes the wires will still make contact, sometimes they'll break in random patterns, so it could change depending on heat and just the right orientation of things.
Regardless, you should already be in line for a return/replacement. Stop reading this!

SilverZero said:
I'm no expert, but it looks like how my old laptops look when the flat ribbon connector to the LCD starts to break. Sometimes the wires will still make contact, sometimes they'll break in random patterns, so it could change depending on heat and just the right orientation of things.
Regardless, you should already be in line for a return/replacement. Stop reading this!
Click to expand...
Click to collapse
The thing is, i ordered it online. From a store that's usually pretty fast with these kind of things, so i hope it turns out ok.
I had to call an asus customer support centre at first though, and they were having technical difficulties, and had to call me back later on. I just hope they call today.

Wow my first transformer had that same thing but it was more in the middle. Sent it back to newegg immediately for a exchange. The
Sent from my Transformer TF101 using xda premium

Account removal
Deleted

Gutted for you! hope you get it swapped quicky. nothing worse than having brand new kit that is faulty.

Small update, Asus called me back with a reference number to a case they have made regarding the unit, now it is up to the store to give me a return code so i can ship the faulty unit back to them.
Hopefully they dont arse about, and send me a new one quickly.

Return right away! That's pretty messed up.

stcardinal said:
Return right away! That's pretty messed up.
Click to expand...
Click to collapse
I plan to, but i have to get a return code from the online site i bought it from. (legitimate site, one of the biggest online electronic stores in norway) so im pretty sure it will turn out ok.
*update*
Finally got a return number, and off it goes.

Today i received an e-mail about the status of my RMA.
A new replacement unit has been sent
It took a while, but they have been swamped in work lately it seems. (Not ASUS, but the store i bought it from)

glad you got that all squared away. I probably wouldnt even be able to articulate the anger I would have felt if that happened to me oh ya, expletives would have been said lol

Galaxy Tab 10.1 Newton Rings are due to my abuse apparently

Hello all,
First time I have done a post so firstly a hello to everyone. Secondly It is an update/ask for advice time from everyone.
I sent my Galaxy Tab 10.1 in for repair due to the newton rings problems and i have been checking it's progress online. Today a new status came up saying:
"Cancelled by ASC Non Defect (Working properly)"​
When I called up customer services they explain that this could be due to two reasons:
1) They have deemed this as a default due to my use (apparently the more likely of the two)
2) For stats they have closed the case and are waiting for a part.
Has anyone had experience with these people and do they know any of their procedures? Also if they do say it was due to my misuse what are my options?
Sorry for the rant and new thread just need some advice asap.
Liam

I dont understand, why are they waiting for a part if the case is closed?
Worst case you can order a new unit, swap screens, and return it.
Remember $500-$600 for a tablet which costs $120 to make demands perfection.

Exactly that's what i said. The service rep was saying this could be a thing they do to make the statistics of cased open and closed better. However he did say this is a unlikely option.

ok, I think I understand now.
They closed the case because they dont want the case number to remain open in their system and pass SLA "service level agreement" time. This is pretty common in hardware repair.
If this is true then it does sound like they will replace the part.

Well that's good to know. At first i was thinking the person was just fobbing me off. I really hope they do repair the device; If not I will go mental at them.
Thanks for the info.
Also have anyone in the UK got theirs repaired yet?

Evan2ac said:
I dont understand, why are they waiting for a part if the case is closed?
Worst case you can order a new unit, swap screens, and return it.
Remember $500-$600 for a tablet which costs $120 to make demands perfection.
Click to expand...
Click to collapse
Wait? It costs $120 to make it, or it's made of $120 worth of bulk parts.
The argument is valid, but not when you twist up reality to make it fit your point. There are other costs involved in making and getting the tablet into your hands than the bulk cost of the parts.

Evan2ac said:
I dont understand, why are they waiting for a part if the case is closed?
Worst case you can order a new unit, swap screens, and return it.
Remember $500-$600 for a tablet which costs $120 to make demands perfection.
Click to expand...
Click to collapse
Sadly I wouldn't have a clue on how to replace it?

For anyone else who has this problem here is an update. They have agreed to replace it but it will take up to 28days. BO

Just buy a new one, swap the back covers, and return the defective one. 28 days is unacceptable for a repair.

Try blowing into the connector pin area & see if that helps you out. Others have reported it working for them. There is a thread in here about it.

RMXO said:
Try blowing into the connector pin area & see if that helps you out. Others have reported it working for them. There is a thread in here about it.
Click to expand...
Click to collapse
Blowing in the connector does as much good as blowing in Nintendo cartridges. The screen is sealed and blowing will do nothing.

Evan2ac said:
Just buy a new one, swap the back covers, and return the defective one. 28 days is unacceptable for a repair.
Click to expand...
Click to collapse
The assertion here being that they don't power on the device and check the serial number, etc., that is electronically embedded in the device? Does that really work?

Another update. I called back and apparently it was sent recorded delivery today. Will let you know when i get it.

Evan2ac said:
Blowing in the connector does as much good as blowing in Nintendo cartridges. The screen is sealed and blowing will do nothing.
Click to expand...
Click to collapse
Tell it to these ppl then
http://forum.xda-developers.com/showthread.php?t=1222149

Evan2ac said:
Blowing in the connector does as much good as blowing in Nintendo cartridges. The screen is sealed and blowing will do nothing.
Click to expand...
Click to collapse
Being the reason why it does actually help. Because the device is sealed you create a greater pressure on the inside of the device than on the outside. Since the back part is more flexible than the front it moves outward, obviously only slightly, but just enough to reduce pressure of whatever is pressing against the screen from behind. And as pointed out, it is only temporary, as when you stop blowing the over pressure seizes as well.

I also have the problem with Newton Rings, but I think it's because it is a little bent. The corners of the tab does not line up when I put it on a table.
Just thought I should mention this so you guys having newton rings can check if yours is bent as well.
It is not the best built tablet and it might bend a little if you have it with you in a backpack etc..

samsung galaxy tab 10.1 newton rings
be careful when you buy any samsung product from overseas , samsung uk will not honour their warrenty although the problem is a know manufacturing defect
http://forum.xda-developers.com/show....php?t=1130230
http://www.yugatech.com/blog/persona...-slick-issues/
http://www.thegalaxytabforum.com/ind...n-rings-issue/
http://galaxytablife.com/2011/07/gal...slick-problem/
http://www.androidpolice.com/2011/07...ings-is-yours/
http://forums.cnet.com/7723-13973_10...sageId=5198453
http://www.iwantadroid.com/2011/07/p...newtons-rings/
https://mobicity.zendesk.com/entries...isture-problem

Solution!
I caught the famous newton rings two days ago after 2 months of ownership - and paniced at once. I read about all the disappointed users and returns and repairs. And decided to do the same. Got a ticket from the berlin workshop, that officially repairs for samsung. But i like experimenting. So i followed some leads before sending in. Put it in the fridge, warm it up on the heating. Both had no effect. At first. Disappointed, I let it lie beside my keyboard and continued working. When i looked at the 10.1 after 40 minutes again, the stain, that measured 2,5 * 5,5 cm in the morning and rather grew bigger when trying to treat, was shrunk to 1*3 cm or so. I did not trust my eyes. After another 10 mins, it was only the size of a fingerprint. And then - the whole screen totally went back to completely normal on its own. No rubbing or pressing could change that development.
My conclusion, and i can not believe, that samsung has not published that quickly and clearely, is that it is a moisture-problem. The weather these days is moist and also, i worked with the tab in moist surrounding lately. The "healing" set in, when i had the tab heated up to ca. 30 - 40 degrees celsius and then let it rest for some time with no cover in a dry room at 20 degrees celsius.
Try it before complaining, if you can live with thecircumstances. I do not know, if the replacement-screens of samsung is different, new at all or only dried by samsung... i will not send in mine anymore.
I can confirm, that the healing by administer some heat is permanent and also by doing the fridge and the heating again after the healing, i could not provoke any stain again.
Good luck!
Sent from my GT-P7510 using xda premium

ok guys, so i had this problem pop up a few months after i bougt it, so last week i spoke to the customer service rep and they mailed me a prepaid ups label, i mailed it to texas, 4 days later its back on my door step.
My impressions:1. They definitely changed the screen, the new screen has a slight texture underneath the glass, that isnt noticeable until you look really really hard.
2. The screen brightness, quality is unchanged.
3. The screen now has a dark grey samsung label on the bezel, my tab didnt have the label before.
4. The tab feels a lot more solid than it did before, not that it wasnt solid before, but there was always a very very slight creak when you handled it, especially at the back. It feels like everything is really really tightened now, feels a lot more dense.its a good thing.
5. I cant seem to produce the newton rings now, before they would appear temporarily when i applied slight pressure to the screen, or when i rubbed the screen to remove fingerprints, but now that doesnt happen. The glass feels a little thicker.
6. Another slight difference, is the fingerprints dont seem to show as much as they did before. Its not a major difference, the screen is still a fingerprint magnet.

RMXO said:
Try blowing into the connector pin area & see if that helps you out. Others have reported it working for them. There is a thread in here about it.
Click to expand...
Click to collapse
It worked for a minute. Haha! What will I do to fix it?

Nexus 7 just showed up from Google Play Aug31, left side of the screen is separating.

I hadn't even heard of this problem and didn't notice it until a couple hours after I had been playing with the device while I was searching in frustration how to get the drivers to root on Windows 8.
Good thing I never figured it out before I noticed the left side of the glass was sticking up just a tiny bit on my brand new Nexus 7. It's still stock If I want to return it. I can push down and hold the middle part of the left side of the screen for a few seconds and it seems to stay down for a few minutes but eventually keeps popping back up just slightly. I've searched and seen videos on youtube where some go to extreme measures of pulling the device apart and tightening screws or clamping it together for hours while leaving it playing HD movies until the battery dies and other methods way beyond those.
Do I I just try and put this flaw out of my mind and be grateful I didn't get a device like some other threads I've found (dead pixels, dead touch zones, brightness issues, etc.) or do I complain to Google ASAP and ask for a replacement while it's still new?
Will they send me out a new device first and then make me ship this unit back or vice versa?

LaTropa64 said:
I hadn't even heard of this problem and didn't notice it until a couple hours after I had been playing with the device while I was searching in frustration how to get the drivers to root on Windows 8.
Good thing I never figured it out before I noticed the left side of the glass was sticking up just a tiny bit on my brand new Nexus 7. It's still stock If I want to return it. I can push down and hold the middle part of the left side of the screen for a few seconds and it seems to stay down for a few minutes but eventually keeps popping back up just slightly. I've searched and seen videos on youtube where some go to extreme measures of pulling the device apart and tightening screws or clamping it together for hours while leaving it playing HD movies until the battery dies and other methods way beyond those.
Do I I just try and put this flaw out of my mind and be grateful I didn't get a device like some other threads I've found (dead pixels, dead touch zones, brightness issues, etc.) or do I complain to Google ASAP and ask for a replacement while it's still new?
Will they send me out a new device first and then make me ship this unit back or vice versa?
Click to expand...
Click to collapse
I have the exact same problem, the left side is coming out a tiny bit. when using it i cant notice it, but when i look from the side i can notice it, but its only a tiny bit. im keeping mine, i have no problems whatsoever with mine (apart from that)

I notice it all the time now that I'm aware of it. After playing with the tablet all night, it's like a tick now to check if the left side is staying down or not.
I realize this is a budget device and form factor may not have been a priority but, after choosing the 16gb version, taxes and shipping, I spent over $280 on the Nexus 7. It's not a $199 tablet.
I want to try another one but maybe only if Google Play's return policy is on the same level as Amazon where they would 2nd day air you a duplicate product with a return label. So you would have a new device before you give up the old one and wait for who knows how long for it to be serviced and returned... not to mention if you are on the hook for return shipping costs.

Send it back and hope you get one from the new batch.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

05GT said:
Send it back and hope you get one from the new batch.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Ordering just a week ago I would have thought I got the latest batch. In my googling though it looks like there is a newer version than what UPS dropped off at my door on 2012-08-31.I believe the relevant info is the SSN on my box an it is C70*
If I had bought this at a brick and morder, I would take it back and exchange it today. Since I didn't and I'm at the mercy of Google and the 3rd party call centers they've hired to handle this kind of think, I'm not sure what I should do.

LaTropa64 said:
I want to try another one but maybe only if Google Play's return policy is on the same level as Amazon where they would 2nd day air you a duplicate product with a return label. So you would have a new device before you give up the old one and wait for who knows how long for it to be serviced and returned... not to mention if you are on the hook for return shipping costs.
Click to expand...
Click to collapse
They email you the return label and RMA form to print out and let you order a free replacement (actually they place a $250 preauth charge on your card that should disappear after a few days)
You get 21 days to send back the defective unit, but the new one should arrive before then.
Sent from my Nexus 7 using Tapatalk 2

C80 has the same issue, took a C70 back yesterday pick up a new one today C80 & straight out of the box its there. I did read that by asking the back off and nipping up the screws on the LH side sorts the issue although I'm yet to try that fix.
Sent from my Nexus 7 using xda app-developers app

LaTropa64 said:
I hadn't even heard of this problem and didn't notice it until a couple hours after I had been playing with the device while I was searching in frustration how to get the drivers to root on Windows 8.
Good thing I never figured it out before I noticed the left side of the glass was sticking up just a tiny bit on my brand new Nexus 7. It's still stock If I want to return it. I can push down and hold the middle part of the left side of the screen for a few seconds and it seems to stay down for a few minutes but eventually keeps popping back up just slightly. I've searched and seen videos on youtube where some go to extreme measures of pulling the device apart and tightening screws or clamping it together for hours while leaving it playing HD movies until the battery dies and other methods way beyond those.
Do I I just try and put this flaw out of my mind and be grateful I didn't get a device like some other threads I've found (dead pixels, dead touch zones, brightness issues, etc.) or do I complain to Google ASAP and ask for a replacement while it's still new?
Will they send me out a new device first and then make me ship this unit back or vice versa?
Click to expand...
Click to collapse
Pop the back off, loosen the screws on the left side then hold the edge tight while you tighten the screws and it should take care of the separation.

alferret said:
C80 has the same issue, took a C70 back yesterday pick up a new one today C80 & straight out of the box its there. I did read that by asking the back off and nipping up the screws on the LH side sorts the issue although I'm yet to try that fix.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I also ended up with a C8 with lift on the left side, new batch doesn't resolve the issue at all, still luck of the draw whether you will get one that has issues or not.
airmaxx23 said:
Pop the back off, loosen the screws on the left side then hold the edge tight while you tighten the screws and it should take care of the separation.
Click to expand...
Click to collapse
This might work but doesn't help everybody, mine was lifting again after a little bit.

NeoMagus said:
This might work but doesn't help everybody, mine was lifting again after a little bit.
Click to expand...
Click to collapse
It isn't to fix screen lift, it's to fix the separation between the bezel and the edge of the screen.

airmaxx23 said:
It isn't to fix screen lift, it's to fix the separation between the bezel and the edge of the screen.
Click to expand...
Click to collapse
Seperation/ screen lift, is the same thing. Look at the link I posted, you can see my bezel and edge of the screen separating. If it worked for you, thats awesome like I said it worked on one of mine for a little before seperating again. It isn't a permanent fix for everyone

I hate hearing that "this is a budget device so it's just something you have to deal with." We paid $200-250 for a tablet. Not $200-250 for a tablet with the left side of the screen popping up above the bezel. The lower price point doesn't disqualify us from from returning one unit to get one that isn't defective. You are well within your rights to do so if it bothers you.

Send it back and get a replacement
Sent from my Nexus 7 using Tapatalk 2

ManBearPig618 said:
I hate hearing that "this is a budget device so it's just something you have to deal with." We paid $200-250 for a tablet. Not $200-250 for a tablet with the left side of the screen popping up above the bezel. The lower price point doesn't disqualify us from from returning one unit to get one that isn't defective. You are well within your rights to do so if it bothers you.
Click to expand...
Click to collapse
Quoted for the absolute truth. :good::good::good::good::good::good:

Wow isn't this like the one thousand thread about screen separation?
Sent from my SPH-L710 using xda premium

I have the same problem. C80...
BUT:
I really don't think that thigthening those screws or adding the missing ones is a good choice here.
If you consider that Asus leaves those screws out of the device on purpose than there can only be one reason:
To me it looks like the display is to big for the frame it might just be 0.1mm or less.
Leaving the screws out will then avoid to add pressure on the display due to pushing it into the too small frame.
That could be the reason that not every device in a batch is bad. They just have a couple of bad positions at molding where they get too tiny frames, the others are OK.
...my 2 cents...
I will keep sending mine back until I get one without missing screws.
Edit: or the two outer screws are too close together. This would even make more sense.

I have exactly the same problem with my Nexus 7. It's an C80. Otherwise the tablet just works perfect.
Is it possible that the screen can break in the future because of that separation? Had someone recognized that the gap got bigger at the C80?
Thanks for your answers.

I'd say if you don't push it down/flex the glass you will be fine.

Yes it is and it is ot covered by the warranty if the screen cracks. Ask for replacement
Sent from my Nexus 7 using Tapatalk

Just got a new one ordered. Screen issue and the WiFi is messed up. Not sure if I messed it up but the wife's n7 gets way more signal. I got a c60 from Ireland.