Related
well, i have the KalimochoAz v10.12 /2.3-rom on my rooted Click. (i know, there are now newer versions, but this is ok for now) and a Haipad M701 (chinese android 2.1-7"-Tablet, rooted) i'd like to use the data (apn/3g) connectrion from my phone to use internet on my pda via wlan.
If i understood everything right, that's what tethering is. I also installed 2 apps (Barnacle Wifi tether and wireless tether) on my phone. I think, i did everything that is set-able, but when i swicht on wlan on my pad, i don't see my SSID i gave for my click.
Anyone got an idea or guide? (i "just" want to acces my Click from the Tablet via WLAN so I can use the 3G-Connection of my Click to surf the net on my Tablet.)
Thanks in advance!
Wireless tether for root works fine for me.
Install the app, run the app, grant su permissions, click for tether and find AP you've created. If you cannot find your AP(tattoo) just wait some time.
i somehow don't get it.
I firstly enable APN (data/3g) connection on my phone and ensure, i can access the internet. then i start the app. (should i activate Wifi on the phone?)
I used Wireless Tether for Root users (2x version 2.X and also the exp. v.3.0 pre11), i just start the app on the phone, disable encribtion (should i care?), check the ssid-name (tried renaming or default), checked the cannel (used 1,7 and 10) and just click that wifi-icon to start.
the phone sais, it's on. then on my tablet (2.1), i just go to settings/wlan/advanced -> set ON and search for AP's, but my phone is not listed.
Did I forget something?
well, just installed the current version of the rom, and everything works fine.
EXCEPT... tethering. I use the version from the marked, used enc. or disabled it, my PC (win 7 x64) found my click, but my android-tablet still did not find it. why?
Re
i faced the same problem, by default settings.
However enabling "Wifi'Encryption" from menu, to WEP-128bit (with default password: abcd .. ) worked.
Hi,
I use "Wireless Tether for Root Users" from the Market and it works fine. By the way I tried it on several different ROMs including CM7_RC2.2 (Gingerbread) and Fyodor's AOSP (Froyo).
Are you enabling Wi-Fi on your phone? You need your regular 3G connection + Wifi enabled. Then launch the application and click the big wifi icon in the middle.
Perhaps you can try CM7 ROM, maybe you current ROM is somehow not compatible.
Regards,
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
hey thanks man
maybe u will find a fix for derefas sd card fix too?
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
MobileMini said:
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
Click to expand...
Click to collapse
I start to believe is this...i'm gonna use use Stock ROM and i will keep you posted if it will be any changes
nsourm has a dualbootloader in his ROM
Maybe its better to boot Android not from "within" WinMo.
Can someone test that?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
In my case the prob was "htcUPCTLoader.exe" it was not allowing deamon to start..so i had to kill it and then run the run.bat file....
Can u try it this way..??..connecting the Mini with pc..running run.bat...after that killing htcUPCTLoader.exe process in task manager..and then running run.bat file again..??.... it might work....if not..then there's no harm done
I dont need to try. The kernel module file (*.ko) in the image is updated. So the problem (at least for me) is not adb push. must be something different.
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
The only thing I changed was adding in the run.bat
Code:
taskkill / F / IM htcUPCTLoader.exe
On beginning of everything, to finish the process before starting the adb. I haven't touched anything of the files zImage and adb.exe
http://www.megaupload.com/?d=3NKI5Z0U
This is my system (android 2.2) running Wifi.
Sak_1 said:
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
Click to expand...
Click to collapse
Thank you for all you've done! Unfortunately,it didn't work on my mini. (my windows rom is 1.38). Still,thank you!
JAntrobus said:
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
Click to expand...
Click to collapse
Its the same behavior as the fixed module was not installed.
If you tab Wifi, it just grays out and do nothing. No error message.
See, im on the standard ROM. And no matter what I try, I get the same.
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
codiak said:
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Click to expand...
Click to collapse
i dont think anyone touched haret after cotulla patched it for mini
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
It worked, mine no longer displays as error. But I dont have any WiFi's to connect to as im also at work. But it looks much more promising.
Just we need to start looking into getting the battery reconised by Android, having to go into Windows to charge my phone.
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
codiak said:
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
Click to expand...
Click to collapse
Unfortunately there wasn't any precise error message. As you said it only was greyed out with "Fehler" (error) written below the wlan switch. It's strange that there still isn't any solution working for everyone.
For me, no "Fehler" came up. Just grayed out. Same behavior like I never applied the patched module. But i can see the patched .ko file in the phone
I´m using tzacapaca patched ext2 file that works for him...
hey..it can't run in my phone x8, pls help...
i had root it (2.1 version)
after i click "start", a text show me that "it sharing my network"
at first time, my ipod/computer can search "barnacle", but it cannot connect to my 2G
i tried to reinstall the barnacle wifi tether, then, my ipod/computer haven't found "barnacle"..........
i tried to reinstall my x8, same problem occur.........
ps. my english is not good-,-thx for read
pls help~~~~~~~/_\
Tether not works on x8 because of hw limitations
Sent from my X8 using XDA App
It works on my X8, do not use WEP key
se_gila said:
It works on my X8, do not use WEP key
Click to expand...
Click to collapse
i haven't use wep key...
wt is yr x8 version?
when i updated, it cannot run..../_\
my version is E51i ( 2.1 update1 ) (M76XX-TSNCJOLYM-53404015 ) ( 2.6.29 [email protected]#1 ) ( 2.1.1.A.0.6)
it works on my x8 im using minicm(http://forum.xda-developers.com/showthread.php?t=964223) , i would use access control making you need to tick a box on your device on the clients tab before that device gets internet. WEP does work but as i find you can't use letters in the password only numbers.
Oups !
Sorry
I have barnacle wifi tether work on miniCM nobodyatall but it does not work on CM7-65 racht... Using the same setting and method but so far no luck...
mamafuck1 said:
hey..it can't run in my phone x8, pls help...
i had root it (2.1 version)
after i click "start", a text show me that "it sharing my network"
at first time, my ipod/computer can search "barnacle", but it cannot connect to my 2G
i tried to reinstall the barnacle wifi tether, then, my ipod/computer haven't found "barnacle"..........
i tried to reinstall my x8, same problem occur.........
Click to expand...
Click to collapse
Mine is work. Anyway, sometimes it takes time to connect with my macbook, but it works fine. I'm using SROM V2 based on minicm (froyo).
can u tell me yr phone's detail?
version etc.
my phone's detail is ...
E51i
2.1 update1
M76XX-TSNCJOLYM-53404015
2.6.29 [email protected]#1
2.1.1.A.0.6
i really really want to share my wifi to my ipod...>_<"
hope be help........
I remember read it somewhere that version 2.1 and 2.2 can use Barnacle WiFi tether but not on version 2.3
Sent from my X8 using XDA App
deani77 said:
I remember read it somewhere that version 2.1 and 2.2 can use Barnacle WiFi tether but not on version 2.3
Sent from my X8 using XDA App
Click to expand...
Click to collapse
i've only used it on stock 2.1, miniCM and froyobread haven't tried a 2.3 ROM so can't comment but 2.1 and 2.2 work.
I also can't get my X8 working with Barnacle. Its an E51i running official (rooted) 2.1 update 1 build 2.1.1.A.0.6 My netbook PC is running windows 7 starter.
Barnacle installs okay and when started the PC sees the nework but gets stuck 'identifying barnacle' and says no network access.
I've found a load of info regarding the X10 elsewhere on this forum:
For the phone:
1. Install Barnacle
2. Make sure wifi is off then open the app, push the menu button and select "settings"
3. Scroll to the bottom, click the DHCP
4. Click "DNS 1 (optional)" and set it to 8.8.8.8 (as stated on page 1 of this post)
5. Push the back button
6. Click on the "WAN" and set it to "rmnet0" (without quotes)
7. Click on the "LAN" and set it to "athwlan0" (without quotes)
DO NOT PUSH THE "START" BUTTON
Thats it for the phone side but if you want to do some extras, you can change the "port" in the NAT section and "gateway" in the DHCP section.
For the PC:
If you know how to view your connections, skip to step 3.
Windows XP Users:
(I'm on my Win7 netbook at work using the x10 wifi as we speak, not XP, so ill try to get this correct)
1. Click the "Start" button (or press the windows key), click on Control Panel
2. Click on "Network Connections"
For Vista/7 Users:
1. Click the "Start" button (or press the windows key)
2. Type "view network connectons" (no quotes) and press enter when it stops loading
For All Users:
3. Right click on your wireless connection and click "Properties"
4. In the box towards the middle of the Properties you should see "Internet Protocol Version 4 (TCP/IPv4)", double click it to open its properties
5. At the bottom, click the "Use the following DNS server addresses:" and set it to 8.8.8.8 (to match the phone)
6. Click "Ok" on both Property windows
Thats it. You should now be able to click the "Start" in the Barnacle app and connect. If your still not getting internet but are connected to the phone with your pc's wifi, run thru the steps again for the PC but while being connected.
Click to expand...
Click to collapse
But I can't get any combo of these settings to work on my X8 and I haven't been able to find any real answers in this or other X8 specific threads. So can anyone provide some step-by-step noob-proof instructions, like those above but for the X8?
um okay ignore my previous post - I left my phone switched off for a few minutes and rebooted it and barnacle is working fine. I used the settings as outlined above, with a five-character WEP key
Sparks1337 said:
um okay ignore my previous post - I left my phone switched off for a few minutes and rebooted it and barnacle is working fine. I used the settings as outlined above, with a five-character WEP key
Click to expand...
Click to collapse
ths, i am trying yr method,,,hope can help!_!
um....do you have set yr pc???
i want to connect to my ipod touch....and i don't know how to set with my ipod....
God! look at those neons at topic "WITH THAT UGLY CAPS LOCK", and I can't say it's better than your name...
As a user said before, tether doesn't work natively due to kernel limitations, with problems as yours I would advice to test another rom, or Full wipe / Fix permissions in xrec.
Sparks1337 said:
I also can't get my X8 working with Barnacle. Its an E51i running official (rooted) 2.1 update 1 build 2.1.1.A.0.6 My netbook PC is running windows 7 starter.
Barnacle installs okay and when started the PC sees the nework but gets stuck 'identifying barnacle' and says no network access.
I've found a load of info regarding the X10 elsewhere on this forum:
But I can't get any combo of these settings to work on my X8 and I haven't been able to find any real answers in this or other X8 specific threads. So can anyone provide some step-by-step noob-proof instructions, like those above but for the X8?
Click to expand...
Click to collapse
7. Click on the "LAN" and set it to "athwlan0" (without quotes)
in this step....i have some problems
when i click Start, it show:
Data network is ready
.int file prepared
WIFI: driver loaded
WIFI: Could not set address of athwlan0 No such device
DHCP: Could not get address of athwlan0: No such device
WIFI: Could not get flags of athwlan0: No such device
NAT: waiting for local Interface
Stopped unexpectedly!
AFAIK tether is only working with android 2.2 or above
I have used Barnacle on 2.1 droid and with 13 char WEP only letters.
I have problems with it on 2.2 ROMs tho... problems with connecting to the ad-hoc its creating.
works for me in CM 1.0.0/1.0.1, and FB... have set a 10-char WEP key. not sure if this helps but make sure your WiFi is OFF when u launch barnacle
Hi devs,
Has anyone ever done an IBSS fix? I want to share my internet connection using win7. Unfortunately, the Adhoc mode in Windows prompts the IBSS error message.
Thanks!
getting the same error on samsung
did you got any luck resolving the ibis ad hoc problem? read on the net that their is a patch (wpa_supplicant ) but couldn't understand how to put it in.
diana.wyfmp said:
did you got any luck resolving the ibis ad hoc problem? read on the net that their is a patch (wpa_supplicant ) but couldn't understand how to put it in.
Click to expand...
Click to collapse
Drop it in system/bin
Or if you want to flash it in CWM, here's the patch:
http://www.multiupload.com/AM4G3BJLBR
kjy2010 said:
Drop it in system/bin
Or if you want to flash it in CWM, here's the patch:
http://www.multiupload.com/AM4G3BJLBR
Click to expand...
Click to collapse
make sure you set permissions correctly or you will get Error.. after replacing this.. I can confirm it works with sharing to notebook cell xbox and will also connect to my wireless printers built in wifi network.. brother printer ...
erica_renee said:
make sure you set permissions correctly or you will get Error.. after replacing this.. I can confirm it works with sharing to notebook cell xbox and will also connect to my wireless printers built in wifi network.. brother printer ...
Click to expand...
Click to collapse
That's why it's a flashable zip file ER, the script sets all the correct permissions
hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks
This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.
Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.
what is this ?
It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.
SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]
it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4
hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok
OH YES! will test and report; long awaited!
I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T
Hello everyone,
I finally managed to solve the problem of connections
thanks
hi to everybody,
thank you for your work!!!!!!! is perfect!!!!
hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network
guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?
Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings
Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App
I use LogMeIn.apk
any solution for GB 2.3.5 ???
I've tried ad hoc on 4 different laptops and it only worked on the newer ones
I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.