Database Users

is there anyone who run Temple RUN without lags

if you r running Temple Run without lags can you share your settings
1.ROM
2.Kernel
3.governer (+settings)
4.IO schedular
5.OC + min/max speeds
6.other settings may help
please share as much details as you can
Thanks

Slim ICS ROM. latest version, with Matr1x 18.5. I have the default scheduler. set at 200/1000 or 1200 with smartassV2. I use the supercharger script with option 5 and lag nullifier.
Other then that, I keep stuff running in the backround to a minimum. On the kernel, I use CFS, but if you are looking for gaming then try using the BFS version.

I just have unrooted nexus s with android 4.0.4 and it runs temple run with little to no lag also don't store it on SD card... makes it slower for some reason
Sent from my Nexus S using XDA

It only lags if i have 3g or wifi on.weird.
•euroskanked with t®inity•

Check my signature. I have my phone Underclocked and I don't have lag or force closes.
I don't experience them with wifi or data on either. Although if you do it could be receiving data from the server or sending data to post your score or something. That would obviously slow it down.
There is only one thing you need to do to get rid of the lag, you don't have to go through the trouble of flashing a new ROM. Just go to your settings. Make sure it isn't on the SD card, move it to USB storage.
Although if you are switching ROMs and everything I'll give you some extra information. I forced GPU rendering. I have v6Supercharge script, option 5 + Nitrolagnullifier. Min free task killer takes 75 MB of RAM to itself. And I have every start-up tweak enabled.
Nexus S (GSM i9020a)
GummyNex (9.0)
Air Kernel (3.45)
OC 800/100 (Lionheart)
Live OC (100 -Noop)
v6 Supercharged

Had no lags with:
- Codename Android 1.60 (ICS 4.0.3) + Air Kernel 3.8 (now using this combo, works very well)
- Slim ICS 3.1&3.2 + Air Kernel 3.8 (switched to CNA because of some annoying bugs, but also stable)
Matr1x Kernel 18.5 was laggy and unstable. (tested with CNA, Slim, Brainmasters)
ondemand, noop, 100-1000 MHz
# Flashed Matr1x 18.5 again. I think I had some unstable configurations. Now it runs stable and smooth.

Yep playing that without any lags here...
Obviously Matr1x 18.5
1300/400 ondemand
Sent from my Nexus S using XDA

1. AOKP b28
2. steve garon kernel (sg-ns-ics one)
3. conservative
4. cfq
5. default settings
NO lag.

No lags, Pure stock
Sent from my Nexus S 4G using xda premium

ROM: CM9 Nightlies
Kernel: Air Kernel
V6 Supercharger, 512 HP, Balanced Settings
Chainfire 3D libs installed
Live OC +8% while playing (5% regular usage)
Fun Game!

1.ROM - stuffedcrust by kong
2.Kernel - air kernel 3.8
3.governer (+settings) - default
4.IO schedular - deadline
5.OC + min/max speeds - default
6.other settings may help - i keep wifi n date off

0 lag, running like hell
ROM: pool party ics
Kernel: math kids matrix 18.5
CFs: interactivex 100_1000
Play on 3g and wifi with ad blocker running
Sent from my Nexus S 4G using Tapatalk

i just installed it yesterday and have no lags until now..running petes(not the new one)with no custom kernel or anything

1.ROM - cm9 5,0
2.Kernel - T132-NS-CM9-201209421
3.governer (+settings) - ondemand (sampling rate 15000 , up threshold 98)
4.IO schedular - deadline
5.OC + min/max speeds - oc'd 1320mhz (1320-100)

dark06 said:
It only lags if i have 3g or wifi on.weird.
•euroskanked with t®inity•
Click to expand...
Click to collapse
try disabling syncing

mathkid95 said:
Yep playing that without any lags here...
Obviously Matr1x 18.5
1300/400 ondemand
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
I use your Kernel
LiveOC120% 240-1200
can you share your rom & IO schedular & governer settings
Thanks

Problem to move to USB storage
going to manage apps
selecting any app the second i click the button "move to USB storage"
i get the bootanimation and the phone doing a reboot (for some reason the reboot is extremely faster)
any idea
what should i do ?
tried from titanium backup some thing

It runs fine on my nexus with ICS but only after I disable the gpu acceleration.
I'm using brain masters stock 4.0.4 ICS build and air kernel 3.0.20
Sent from my Nexus S using xda premium

Works great here on Nexus S 4G with stock IMM76D. Works just as well with stock kernel as with GLaDOS V2.11.

jasonmaloney said:
Works great here on Nexus S 4G with stock IMM76D. Works just as well with stock kernel as with GLaDOS V2.11.
Click to expand...
Click to collapse
+1 for GLaDOS 2.11 bfs

Special abilities of ICS kernels

Semaphore kernel:
Semaphore kernel is most overhead-free and low memoryprint kernel for ICS.
Because it has everything as modules. If you don't enable them from Semaphore Manager , they won't increase memory footprint. Even deep idle statistics.
Max OC step is 1000mhz but you can live overclock it to 1300mhz.
It has bm and normal version.
Glitch Kernel:
Overclock is a keyword for this kernel. It has too much steps for overclocking.
Best part is; when I overclock my phone 1580mhz with glitch kernel, my phone is still cold like 1000mhz.
MNICS kernel has 386mb RAM with 720p recording.
Midnight Kernel (Mnics):
Very daily kernel for average use. You can set up too much things with it's own manager.
Unlike other kernels, midnight kernel supports regular OC but not live OC.
No bm version.
Devil Kernel:
A kernel with lots of features and pretty nice for advenced users. You can set governor settings on NSTOOLS. It has 1400mhz step and live oc. This making it highly overclockable. It has selective oc to prevent live oc on low frequencies.
It has cm color and voodoo color - bm and normal version.
Which is faster?
God knows.
Which has more battery life?
God knows.
Which is best?
All are best depends on your needs.
Which kernel you are using?
Devil kernel for OC to 1600mhz.
I have bunch of android devices because of my family. Lots of kernels on too much devices.
We are so lucky. All of them are one of best kernels on XDA.
Sent from my GT-I9000 using Tapatalk 2 Beta-6

Yeah, Glitch kernel have been one of the best kernels for me to oc since cm7. I have heard that they try to port it to Nexus S also.
SGS has good kernels,you're right.
Sent from my GT-I9000 using XDA

Updated with links.

i also love glitch kernel because in cm7 it give the frequency upto 1800 mhz and in pics it gives up to 1500mhz

burakgon said:
Midnight Kernel (Mnics):
No bm version.
Click to expand...
Click to collapse
MNICS-LR = 386Mb
MNICS = 340Mb
"too much" = "devs should remove some options because there are too much of them" !?
Nice thread idea, thanks

mialwe said:
MNICS-LR = 386Mb
MNICS = 340Mb
"too much" = "devs should remove some options because there are too much of them" !?
Nice thread idea, thanks
Click to expand...
Click to collapse
I'm happy if you like it. I will imporive this thread
Sent from my GT-I9000 using Tapatalk 2 Beta-6

I think you made a mistake. Max OC in Semaphore is 1200.

great stuff, thanks...
gentle suggestion: I think perhaps you are using "too much / too many", when you mean "lots of"? The former is a bad thing, the latter good

cabessius said:
I think you made a mistake. Max OC in Semaphore is 1200.
Click to expand...
Click to collapse
Clear semaphore directory on sdcard. You got gb scripts.
Sent from my GT-I9000 using Tapatalk 2 Beta-6

cdmackay said:
great stuff, thanks...
gentle suggestion: I think perhaps you are using "too much / too many", when you mean "lots of"? The former is a bad thing, the latter good
Click to expand...
Click to collapse
Fixed it now. Thanks for fixing me. Imporived my english 1 step more.
Sent from my GT-I9000 using Tapatalk 2 Beta-6

devil kernel best for me but it has some bugs.
ex:when using devil2 xl and i wanted to change to devil2 xl_bm i got bootloop and clockworkmod got broken.i can only fixed via odin
sorry for my crappy english

~UnderTaker~ said:
devil kernel best for me but it has some bugs.
ex:when using devil2 xl and i wanted to change to devil2 xl_bm i got bootloop and clockworkmod got broken.i can only fixed via odin
sorry for my crappy english
Click to expand...
Click to collapse
That's a problem for some users, but I myself never got bootloops after flashing devil. Since a while, I'm flashing with kernel cleaning script before, but it also works without.

NEXUS S and the overclock

Hi guys,
I have a problem with my nexus s (i9023).
I've pretty much tried all the ROMs available on XDA. Every time I try to do with any overclocking kernel, but after some use the phone crashes and restarts.
The processor of the nexus s does not support overclocks?

FYI over clocking does cause your phone to restart or crash
Sent from my Nexus S using xda premium

Increase your voltage.
Sent from my Nexus S 4G using xda premium

Have you tried matr1x? It was stabile for me when i overclocked!

4I-I said:
Have you tried matr1x? It was stabile for me when i overclocked!
Click to expand...
Click to collapse
Yeah ... My i9023 also can handle 1200 with matrix without raising voltages and with no reboot whatsoever .
Unfortunately for us (and really nice for him, because he moved to N4 ) .. The matrix is discontinued..
Ps: check out the kernel in the hellybean thread . it has live oc working as well. :thumbup:

raducux said:
Yeah ... My i9023 also can handle 1200 with matrix without raising voltages and with no reboot whatsoever .
Unfortunately for us (and really nice for him, because he moved to N4 ) .. The matrix is discontinued..
Ps: check out the kernel in the hellybean thread . it has live oc working as well. :thumbup:
Click to expand...
Click to collapse
which kernel should I install? bfs or cfs? Thanks
Inviato dal mio Nexus S con Tapatalk 2

fedpisano said:
Hi guys,
I have a problem with my nexus s (i9023).
I've pretty much tried all the ROMs available on XDA. Every time I try to do with any overclocking kernel, but after some use the phone crashes and restarts.
The processor of the nexus s does not support overclocks?
Click to expand...
Click to collapse
For some reason my phone (also i9023) can only handle 1320mhz OC.
Other steps (1200, 1400, 1096, etc..) cause reboots.
Try using matrix cfs then OC to 1320mhz.
Or marmite 7.2.1, increase all voltages by +25mv then OC to 1320mhz.

raducux said:
Yeah ... My i9023 also can handle 1200 with matrix without raising voltages and with no reboot whatsoever .
Unfortunately for us (and really nice for him, because he moved to N4 ) .. The matrix is discontinued..
Ps: check out the kernel in the hellybean thread . it has live oc working as well. :thumbup:
Click to expand...
Click to collapse
Please point me to the Nexus S discontinuing..

My phone easily handles 1200mhz... 1320mhz works well too but under heavy load I'll get a reboot... 1400mhz def needs raised voltages... I've clocked that high before but I don't think the phone runs as smooth at that setting... Might be too much for the processor... This was using various kernels... Currently on Matr1x CFS 24.0 cm @ 1200mhz running fine!
Sent from my Nexus S 4G using Tapatalk 2

Try trinity kernel also. I could go upto 1.4ghz with ease in that.
Sent from my Nexus S

seibott said:
Try trinity kernel also. I could go upto 1.4ghz with ease in that.
Sent from my Nexus S
Click to expand...
Click to collapse
Some kernels are undervolted... So it makes it less stable... I'm on cm10.1 right now with the included kernel and it seems to be running at 1400MHz just fine...
Sent from my Nexus S 4G using Tapatalk 2

I use marmite 7.2 but still no could not find a way to make it stable @ 1096mhz .. I just need the GPU clock to be stable so that I get a smooth gaming experience as well . Plus I cant revert back to matrix as its JB 4.1.1/4.1.2 and not 4.2.1 ... Anyone was able to make a i9023 stable @ 1096mhz ??

ReVo_007 said:
I use marmite 7.2 but still no could not find a way to make it stable @ 1096mhz .. I just need the GPU clock to be stable so that I get a smooth gaming experience as well . Plus I cant revert back to matrix as its JB 4.1.1/4.1.2 and not 4.2.1 ... Anyone was able to make a i9023 stable @ 1096mhz ??
Click to expand...
Click to collapse
I'm more or less stable at 1096 running BB6 ROM and marmite 7.2. Sometimes it gets slow with heavy usage and needs a reboot.

the1dynasty said:
Some kernels are undervolted... So it makes it less stable... I'm on cm10.1 right now with the included kernel and it seems to be running at 1400MHz just fine...
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
+1 for that! same setup same experience.

running liveoc at 110% only on 1.0Ghz step with +25mv over the default voltage. running smooth!

ej8989 said:
For some reason my phone (also i9023) can only handle 1320mhz OC.
Other steps (1200, 1400, 1096, etc..) cause reboots.
Try using matrix cfs then OC to 1320mhz.
Or marmite 7.2.1, increase all voltages by +25mv then OC to 1320mhz.
Click to expand...
Click to collapse
Same with my i9023, 1320mhz works great on my setup of CM 10,1, Matrix 7.2.3 kernel. Stock voltages.

I've been trying for a long time to find truly stable voltages for either 1096 (marmite) or 1200 (air kernel), but irrespective of my mVs I can never get beyond two days of uptime before I experience a freeze. All overclocks seem to work at the default volts set by each developer but there's this latent instability I can't do anything about. Starting to think this is just the nature of the beast and very few NS users actually have CPUs capable of long-term OC stability.
Still, a few extra FPS in the launcher and a slightly smoother Temple Run probably don't justify an OC anyway.

i use marmite overclock 1-2 days ...all ok here

I can run [email protected] for as long as I want. Even 1320 with 25 volts increased. Never had issues.
Sent from my Nexus S

Well dang.
Maybe I just have an anaemic ARM chip.
That being said, I've really only ever experienced the symptoms of an unstable overclock when my battery's been close to empty. I suppose that might cause the voltage to dip and my phone to freeze. Might try 1096 again using 7.3.

Nexus benchmark

Hello.this is my antutu result.please share opinion and screenshots.i use cm10 stable with marmite kernel.
Whats your score?
Sent from my Nexus S using xda premium

My first run was 2700 something, then i rebooted and got this. Running latest cm10.1 nightly, with marmite 8.4. Stock freq.
Looks like cm10 is way faster than cm10.1. OP do you have any mods?

Serris said:
My first run was 2700 something, then i rebooted and got this. Running latest cm10.1 nightly, with marmite 8.4. Stock freq.
Looks like cm10 is way faster than cm10.1. OP do you have any mods?
Click to expand...
Click to collapse
Yep i used oc 1400.I just flashed jellyshot with mermite kernel with 1.32 OC and smartass and got this

First two screens are result for cm-10.1-20130408-NIGHTLY rom with cm kernel.
The 3rd and 4th screenshot were made after updating to 20130416-NIGHTLY and flashing mermite-v8.5cm kernel.

Carbon ROM, no over clock and stock
Sent from my Nexus S using xda premium

Over clocked 1300 Carbon ROM
Sent from my Nexus S using xda premium

Yesterday I've overclocked CPU to 1100mHz on marmite_8.5 kernel and got score around 3850 but forgot to take a SS :/
Today, I flashed Air_Kernel_Weekly_r341_JBN_BlueColor_CM, overclocked CPU to 1200mHz and then made the test again. Results in first ss. After that I was courious what are the results for normal CPU frequency. So the results for the same kernel, running at 1000mHz are in the second screenshot.
So the best results were using Air kernel with overclocked CPU. When CPU wasn't overclocked the best results were with latest marmite kernel.
so, I urge CM10.1 users to post their results and that way we'll find the best config

B33zal said:
Yesterday I've overclocked CPU to 1100mHz on marmite_8.5 kernel and got score around 3850 but forgot to take a SS :/
Today, I flashed Air_Kernel_Weekly_r341_JBN_BlueColor_CM, overclocked CPU to 1200mHz and then made the test again. Results in first ss. After that I was courious what are the results for normal CPU frequency. So the results for the same kernel, running at 1000mHz are in the second screenshot.
So the best results were using Air kernel with overclocked CPU. When CPU wasn't overclocked the best results were with latest marmite kernel.
so, I urge CM10.1 users to post their results and that way we'll find the best config
Click to expand...
Click to collapse
On general (my experience) 3200-4000 is pretty normal without overclocking depending on rom/kernel/phone/battery level and temperature.. Two identical phones with the same set up will get different scores. Some mods/tweaks can increase this as well as having a good amount of free ram and no other programs running.
But these are just "fun" tests and not a true assessment of real performance..
With that said, Carbon rom is SOOOO much faster..

Ofcourse But as you've said.. It's fun to test out different combinations and it also feels good when you out do the first score for 1000 points and make your phone as good as some more expensive phone ^^

B33zal said:
Ofcourse But as you've said.. It's fun to test out different combinations and it also feels good when you out do the first score for 1000 points and make your phone as good as some more expensive phone ^^
Click to expand...
Click to collapse
Agreed... And it is fun mopping the floor with slow ROMs (joking)...
This was set at only 800 mhz
Consider yourselves challenged..
Sent from my Nexus S using xda premium

Why your 3D scores under 2k?
Sent from my GT-I9000 using xda app-developers app

burakgon said:
Why your 3D scores under 2k?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
No matter what rom I've tried, I don't get much over 2k on 3d.. this test I was just a bit under, but still damn good for a Nexus S.. I saw you are trying to improve the graphics in your rom, I hope it works, but I really want a faster load time on apps and less lag in everything else. I have tried your rom, on this test as well, and you came up over 500 points below my score of 5300. I test all roms the same with multiple kernels (stock included as well) and different schedulers/ governors.. but as battery life goes you are towards the top..

[BANK] Your Xperia Play Status?

Hey XDA, just wanna see what's up with people's XPlays!
Try n' follow this template:
Hardware:
- 3600mah Battery
- 32GB UHS 1 Class 10 SD-Card
Software:
Rom - The Super Nexus Project
Kernel - Lupus GB v12 720p
Description - Potato
Performance:
Min - 200mhz
Max - 1.2ghz
Governor - intelldemand2
I/O - Row
Click to expand...
Click to collapse
(Optional) Screenshots:

Mugen 1800 Battery
2 OEM Spare Batteries
2 2600 Alternate AfterMarket Batteries
64GB Ultra Class Sandisk MicroSD
Stock Debloated - get 49fps in MC4
Lupus V12.5
568 min
1.1 max
SIO
Intellidemand2
Jawbone Icon HD Bluetooth
S.E. LiveView*
S.E. Media Dock
*Odd enough I can run both devices at the same time.
**Prototype AT&T Model unlocked for T-Mobile USA - No AT&T branding so it looks like R800i

Hardware:
Using the stock battery but I have a 3600 mah spare for when needed
32 GB Class 10 micro SD
Software:
Gin2Jellybean Rom with ADW launcher
Lupus v11 GB kernel
Screenshot:

Hardware:
- 1500mah Battery (stock)
- 32GB Class 4 SD-Card by Kingston
- Carbon fiber sides (coming soon)
Software:
Rom - Gin2JellyBean v.2.4.0 (it`s awesomeee)
Kernel - Lupus GB v11 720p (also awesomeee)
Performance:
min: 134MHz
max: 1,018 GHz
Governor: SmartassH3
Scheduler: sio
My opinion: it´s something more than a phone, it´s, it`s....... AMAZING!!!!

Uve got a real interesting setup,
Sent from my R800i using xda app-developers app

Thank you and can you please share your wallpaper? because I love it
Enviado desde mi Xperia Play

Hardware:
- stock battry (not working well now.)
- 8GB sd-card (the one that is with phone)
Software:
Rom - krisdee hybrid rom
Kernel - Lupus ICS/GB v7 480p
Performance:
Min - 200mhz
Max - 1.5ghz
Governor - intactivex (some times i change this
I/O - sio
My opinion: going to change it when i can. i really need better hardware and ram
i dont know any other way to take screenshots

Hardware:
2450mah Gold Battery
16GB SanDisk Class 10 SD-Card
Orange Case
Software:
Rom - XPlayStation V9
Kernel - DoomLord ICS V3
Performance:
Min - 200mhz
Max - 1.4ghz
Governor - Interactive
I/O - Deadline

Ragga Muffin said:
Hardware:
- 1500mah Battery (stock)
- 32GB Class 4 SD-Card by Kingston
- Carbon fiber sides (coming soon)
Software:
Rom - Gin2JellyBean v.2.4.0 (it`s awesomeee)
Kernel - Lupus GB v11 720p (also awesomeee)
Performance:
min: 134MHz
max: 1,018 GHz
Governor: SmartassH3
Scheduler: sio
My opinion: it´s something more than a phone, it´s, it`s....... AMAZING!!!!
Click to expand...
Click to collapse
Aw snapp... I might do the carbon fibre thing to,

frago21ps said:
Hardware:
2450mah Gold Battery
16GB SanDisk Class 10 SD-Card
Orange Case
Software:
Rom - XPlayStation V9
Kernel - DoomLord ICS V3
Performance:
Min - 200mhz
Max - 1.4ghz
Governor - Interactive
I/O - Deadline
Click to expand...
Click to collapse
sweet case!, also my gold battery is comming in 2-4 days,

Ragga Muffin said:
Thank you and can you please share your wallpaper? because I love it
Enviado desde mi Xperia Play
Click to expand...
Click to collapse
Here u go + HD,
Download:
http://www.mediafire.com/view/8ro1lvtbdquvlk2/stormtrooper.jpg

I have the obvious boring setup lol
Hardware:
Stock battery
32gb class ? SD card
Software:
Rom: Gin2gb 2.4.0
Kernel: Lupus GB v11 720
Performance:
Min: 134mhz
Max: 1ghz (normal), 1.6ghz (gaming)
Governor: virtuous
I/O scheduler: sio
This thread makes me want to go get a new battery, 3500mah would be nice. Does it double battery life? Where did you guys get the after-market batteries? Sorry to derail.
Sent from my R800i using xda app-developers app

korrectmethod said:
I have the obvious boring setup lol
Hardware:
Stock battery
32gb class ? SD card
Software:
Rom: Gin2gb 2.4.0
Kernel: Lupus GB v11 720
Performance:
Min: 134mhz
Max: 1ghz (normal), 1.6ghz (gaming)
Governor: virtuous
I/O scheduler: sio
Click to expand...
Click to collapse
And i have the same Status only diference is my sd card is a 16Gb class 2 and my governor is smartassH3, i known is boring... but excelent

Nah ur setup isn't Boring, , its good and solid!
The 3600mah battery do 2.5 times battery for me, I can game all day... I'm not kidding man, the battery lasts forever,
And u can pick 1 up from eBay for about 10USD,
Sent from my R800i using xda app-developers app

Once again, no ones setup is boring just personal opinion and preference,
Sent from my R800i using xda app-developers app

frago21ps said:
2450mah Gold Battery
Click to expand...
Click to collapse
I've seen these for really cheap on ebay but they don't look very trustworthy...
Where did you get yours and how is it working?

He's not the only one whose got i
I got 1 and its due in 5 days,
But apparently Ozzmajn says they make the phone really hot!
Sent from my R800i using xda app-developers app

Pizza_Dox said:
He's not the only one whose got i
I got 1 and its due in 5 days,
But apparently Ozzmajn says they make the phone really hot!
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Does getting really hot affect anything else than just... temperature? I want a gold one too but I think someone said there were some problems with the compass... Am I wrong? (I hope so..)
Sent from my R800i using xda premium

leots said:
Does getting really hot affect anything else than just... temperature? I want a gold one too but I think someone said there were some problems with the compass... Am I wrong? (I hope so..)
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Ive had a gold stock sized 2630 mah battery for about 6 -8 months now its does make the phone a little hotter but not much ive never had any issues with it and I get a good extra 6 hours gaming out of it which is allways good!
Sent from my R800i using xda app-developers app

Hardware:
Stock 1500mah battery
16GB Class 10 UHS-1 sandisk SD card
Software:
Slim bean 3.0
Lupus JB v5
Clock: 249mhz-1,017ghz
Governor: Dark side
I/O scheduler: Noop
sent from my Sony Ericsson xperia play ™ (r800x) using Tapatalk 4