Android Commander Problem - Galaxy Note GT-N7000 General

Hello
I have a problem with my Galaxy Note, i bought it yesterday and i upgraded the firmware to N7000OJPKK2 from sammobile.com.
Now i'm trying to root it to use android commander. i have done it with DooMLoRD v4 tools, and now i can use root explorer and similar software.
When i connect my Note and start Android commander i got Root Access : NO and i'm sure it is rooted because i can change the system files.
i tried the command ADB ROOT but i got : "adbd cannot run as root in production builds"
So please what can i do the fix this ?

Related

SU access thru terminal but not through GUI apps?

Specs: Droid, running Android 2.0.1, rooted
su works but apps still say I don't have root?
I'm an IT Professional not a newb, but not super great on Linux either.
I've followed the rooting steps, after updating manually to 2.0.1
The issue is, I can go: su using a term emulator on my phone and it says "access granted courtesy of magicandroidapps" (something like that). and I can do root things. But when I do anything that requires root and has a GUI I get errors and messages that I don't have root access
I can do things through the term emulator, but for some reason when I download apps that require root and try to use them it still says I don't have root access? What gives? I couldn't even rename a file in /etc/bluez using ROOT EXPLORER (a file manager).
It's like root works on term emulator but not through GUI apps? Am I missing something?
Edit/Delete Message
Disregard, problem solved
Apparently the latest droid root technique works. For some reason the original technique didn't seem to work. This is what worked for me...
http://areacellphone.com/2009/12/motorola-droid-rooted-howto-root-droid/
Much simpler too. No adb stuff.

Pre-install Startup Manager with Root access?

Pre-install Startup Manager with Root access?
i didnt success to run it with root access
maybe its could be done if i run it while the installation of android ?
thx
Once you have a proper superuser app installed you should be able to gain root with any app.
If you are having problems with the superuser currently installed I suggest removing it Via either adb or Root manager.
Programs like Android commander can set adb up for you.
As a rule Any app that needs root I give it permission then restart to make sure it takes affect.
thx root manager did the trick
gr8 30% 126MB used
hope its will make the battery little longer
wierd the startup manager is not working even with root access
i put it in the backup root manager directory and restore and did happend to work but nothing :S
still the same error i get without root access
Please see Google Android issue 14889

[Q] Acer Iconia Factory reset and now no WIFI

HI Guys,
Maybe somewhat can help me out here, in my attempt to update my Acer A500, I may have in a kind of way bricked my phone. I attempted to replace wpa_supplicant file as per some of the instructions, needless to say the update failed and me in my pure genius figure I would simply factory reset and reboot. Which I ended up doing, the problem now is that the WIFI does not turn on and my tab has been unrooted, I no longer have any file explorer app on the phone and I can't download anything. Does anybody know how I can gain access to the root files so that I may revert back the old file, or somehow install an apk file from the mini sdcard or even get access to the internet via bluetooth or USB. Anything would be helpful.
FYI - I am trying to gain access to my root files using Android SDK, but I've always had problems getting any of my pc to find any of the android stuff when plugged in.
Ph0tin0 said:
HI Guys,
Maybe somewhat can help me out here, in my attempt to update my Acer A500, I may have in a kind of way bricked my phone. I attempted to replace wpa_supplicant file as per some of the instructions, needless to say the update failed and me in my pure genius figure I would simply factory reset and reboot. Which I ended up doing, the problem now is that the WIFI does not turn on and my tab has been unrooted, I no longer have any file explorer app on the phone and I can't download anything. Does anybody know how I can gain access to the root files so that I may revert back the old file, or somehow install an apk file from the mini sdcard or even get access to the internet via bluetooth or USB. Anything would be helpful.
FYI - I am trying to gain access to my root files using Android SDK, but I've always had problems getting any of my pc to find any of the android stuff when plugged in.
Click to expand...
Click to collapse
I was in this court just yesterday, swearing up and down for some reason.
You'll need the root explorer apk, gingerbreak apk and the original wpa_supplicant file posted all over XDA.
Download and install Android SDK. It will also make you download the Java SDK too before you install the Android one. Start installing the Android SDK. It will seem like it's going to take forever, but you really only need what's in the folders 2 minutes in.
Go into the program files folder where the SDK stuff is and rip the 3 ADB files out and place them in their own folder. Mine were in: c:\program files\android\android-sdk\platform-tools\
I took the 3 files out and placed them in c:\and\
Place the apks in the c:\and\ folder
Make sure the driver files are installed from the Acer website.
Make sure USB bugging and apps from outside sources are enabled in settings on the tab.
Plug the tab into the PC via USB.
Open up the command prompt and go to the c:\and\ folder
then type
adb install c:\and\rootexplorer.apk
ENTER
then
adb install c:\and\gingerbreak-v1.20.apk
ENTER
The apps should be now installed on the tab.
Then just transfer the wpa_supplicant file over and you're right where you need to be.
Make sure you change the permissions on the wpa_supplicant file like you did the first time (enable everything read/write/etc etc) by holding on the wpa_supplicant file that you paste.
rorytmeadows said:
Open up the command prompt and go to the c:\and\ folder
then type
adb install c:\and\rootexplorer.apk
ENTER
then
adb install c:\and\gingerbreak-v1.20.apk
ENTER
The apps should be now installed on the tab.
Then just transfer the wpa_supplicant file over and you're right where you need to be.
Make sure you change the permissions on the wpa_supplicant file like you did the first time (enable everything read/write/etc etc) by holding on the wpa_supplicant file that you paste.
Click to expand...
Click to collapse
You are my new hero, all this time I've been trying to get Android ADK to recognize my tablet, but to no success. All I had to do was run ADB, which Ironically I had done, but only to see if it recognizes my unit. I was not aware I can install apps with it.
I'm not worthy... I'm not worthy
A million thank you's, now to try and get 3.1 installed and hopefully Googel/android was smart enough to put in a stock file explorer.
Not working wifi hardware
Somewhat similar to what happened to this guy. But to be specific, I am using an acer a500 originally on a rooted ics 4.0.3, i remember using lucky patcher and using the custom patch on adobe flash player then i saw an update regarding busybox and superSU...i was able to install the busybox updater but not the superSU since i remembered i already had superuser. I opened superuser and then it updated...from then on...I lost my wifi...at start it was still there but it can't connect. also, i lost my root because i no longer am able to use titanium backup. double checking it, i downloaded a root checker and it displayed not properly rooted. seeing this, i thought it's been a long time since i've updated my rom so i might as well upgrade everything...my bootloader, kernel, rom. So i first degraded it by flashing to the full package stock HC 3.1 ROM (it had an old HC 3.1 bootloader). Then i noticed i can no longer turn on my wifi and use my old apps...I flashed it back to a NON-rooted stock ics 4.0.3 thinking it might fix it...but it did not. HELP please...

[Q] GUIDANCE after root

Hi,
I'm totally noob and have zero knowledge about rooting.
I just rooted my G7102 (kitkat 4.4.2 - XWUBNK1) with latest CF auto root. Had SuperSU 2.39 PseudoPro installed. Got notice available update through PlayStore then update. After that, check with Root Checker Pro and it show below message :
Root access IS correctly configured for this file! Executing this file can grant root access! Root user ownership is present and setuid attribute is not present.
What bold text does mean ?
is it correct rooted or not ? please guide me further for what I should do

I have a galaxy j327a having trouble trying to root it. I've tried kingo root, one click root, magisk and nothing. [email protected] help me $ 4u

Need help rooting galaxy j327a tried so many rooting tools and nothing. [email protected] please help $4u
AT&T Samsung Galaxy J3 SM-J327A Root and TWRP Recovery might be Released soon | NewsVivs
I have a jp6 securus tablet build 4.0 and have es file explorer pro which needs a rooted phone to execute the hexaflash to hack the tablet so I need to root phone in order to do this or do u know how to bypass root explorer in es file explorer pro again [email protected] hit me

Categories

Resources