[Q] [q] pleas help!!!! - XPERIA X8 General

Hi guys. I had on my X8 Unlocked Bootloader, nAa Kernel and MiniCM7 2.1.7. Today i went into service to Sim-Unlock my phone. When they give me phone back there was Android 2.1. So i Rooted my phone again and flash kernel and restore ROM. There is my problem. My Bootloader is unlocked but when i turn on my phone with restored MiniCM on nAa logo its reboot and again and again. I cant boot my phone. So can i repair it without lose my Sim Unlock?? Pleas help me i want back my MiniCM7
Sorry for bad english ...

You must go to recovery and re-flash miniCM. After that do a full wipe, boot and if everything will be ok restore data partition.

I tried it but not working When I try to re-unlock bootloader i lose my sim-unlock ?

Thanks bro !! I use SEUS to install 2.1 and after i do re-flash of MiniCM as you tell me and it works Thanks again

RaDiS234 said:
I tried it but not working When I try to re-unlock bootloader i lose my sim-unlock ?
Click to expand...
Click to collapse
[Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro says ...
Note: Unlocking the bootloader of your phone will restore the original sim lock of your phone (if you had any) unless if you unlocked with EMMA/IMEI unlock code or it was factory-unlocked or if SE unlocked it!
Click to expand...
Click to collapse

Related

Strange thing with unlocking bootloader

Hi all,
I have unlocked my bootloader with the steps from laser nice job ... then i installed the new doom kernel and everything was fine.... The only thing that was wrong was that i didnt could sent any sms. So i flashed the right baseband and the sms was fine but know i`ve got the se letters back....
So is my bootloader unlocked our what did i do wrong
i'm new, but..
ok i did not unlock my BL, but..
i think that unlocking the BL is permenant (u cannot relock/undo the unlock)
so, the 'Sony Ericsson' that you see now does not mean that you lost your bootloader. (i know that if u unlock BL, u gett a new boot screen, but maybe the bootscreen might have just accedentally rolled back to the original). i dont think bootloader can ever be deleted once unlocked. SO MATE, congrads, u still have the BOOTLOADER!
remco.k said:
Hi all,
I have unlocked my bootloader with the steps from laser nice job ... then i installed the new doom kernel and everything was fine.... The only thing that was wrong was that i didnt could sent any sms. So i flashed the right baseband and the sms was fine but know i`ve got the se letters back....
So is my bootloader unlocked our what did i do wrong
Click to expand...
Click to collapse
Flash doom kernel everything will be fine you flashed the stock kernel that is why you got old sony boot logo happened to me aswell
ok Super guys .... thanks for youre help
u can relock ur BL
Devin-J said:
ok i did not unlock my BL, but..
i think that unlocking the BL is permenant (u cannot relock/undo the unlock)
so, the 'Sony Ericsson' that you see now does not mean that you lost your bootloader. (i know that if u unlock BL, u gett a new boot screen, but maybe the bootscreen might have just accedentally rolled back to the original). i dont think bootloader can ever be deleted once unlocked. SO MATE, congrads, u still have the BOOTLOADER!
Click to expand...
Click to collapse
u can fully re-lock ur bootloader..with this thread http://forum.xda-developers.com/showthread.php?p=17494360

Unlock bootloader check

Hi all
i have tried to unlock bootloader followed the steps that mentioned in the xda how do i know boot loader is unlocked? Cause when i put oodie prime rom it just stuck on sony ericson logo
thanks in advance to all
have you flashed a kernel for unlocked botloaders?
nbkhan said:
Hi all
i have tried to unlock bootloader followed the steps that mentioned in the xda how do i know boot loader is unlocked? Cause when i put oodie prime rom it just stuck on sony ericson logo
thanks in advance to all
Click to expand...
Click to collapse
"stuck on sony ericson logo" means you bootloader is locked
OR
You unlocked it & forgot to flash kernel
flash one of the kernels from here http://forum.xda-developers.com/showpost.php?p=19743047&postcount=1639
then button mash the volume down button and full wipe then install his rom
Hi
i have not put flash the kernel
i will give it a try and let u know
just reflashed the kernel and it work fine
thanks for help

[Q] Unlocking Bootloader through Flashtool with Custom Kernel?

Quick question about unlocking the bootloader. (I'm a bit of a noob )
I'm running ZMOD 2.3.3 which uses a custom kernel. However when reading the flashtool FAQ it says the requirements for unlocking the bootloader through flashtool are:
kernelversions=2.6.29,2.6.29-00054-g5f01537
androidversions=2.1,2.2,2.3
needroot=true
compatibledevices=X10,E10,E15,U20
I'm guessing I'll need a default/standard kernel installed and possibly leave the ROM unrooted before I can do this? So should I install a vanilla 2.3.3 ROM which should switch the kernel back to default and then proceed to unlock the bootloader (I don't have to bother changing the baseband)?
Thanks in advance.
shroomhead said:
Quick question about unlocking the bootloader. (I'm a bit of a noob )
I'm running ZMOD 2.3.3 which uses a custom kernel. However when reading the flashtool FAQ it says the requirements for unlocking the bootloader through flashtool are:
kernelversions=2.6.29,2.6.29-00054-g5f01537
androidversions=2.1,2.2,2.3
needroot=true
compatibledevices=X10,E10,E15,U20
I'm guessing I'll need a default/standard kernel installed and possibly leave the ROM unrooted before I can do this? So should I install a vanilla 2.3.3 ROM which should switch the kernel back to default and then proceed to unlock the bootloader (I don't have to bother changing the baseband)?
Thanks in advance.
Click to expand...
Click to collapse
Just revert back to stock rom and you'll be fine.
Thank you for the quick reply.
So by that you mean the stock 2.1 ROM be fine, as I won't need a functioning baseband?
shroomhead said:
Thank you for the quick reply.
So by that you mean the stock 2.1 ROM be fine, as I won't need a functioning baseband?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1254087
here is the separate thread......
x10forevers said:
http://forum.xda-developers.com/showthread.php?t=1254087
here is the separate thread......
Click to expand...
Click to collapse
But that link doesn't discuss using flashtool as far as I can see.
What it need to know is how do I put my phone into a state whereby I can use flashtool to unlock it.
I'm first going to stick my phone onto the generic 2.3.3 ROM from here:
http://forum.xda-developers.com/showthread.php?t=920746&highlight=2.1.A.0.435
(the download multiupload.com link is dead )
Just flash a stock firmware, put your phone in usb-debugging mode, then turn on the latest flashtool and root it then unlock bootloader.
Got it.
Many thanks.
edit: hmmm I ran the bootloader unlock and this happened:
13/023/2012 10:23:23 - INFO - Running runbootwrite as root thru sysrun
13/023/2012 10:23:24 - INFO - Successfully applied unlock. Rebooting
13/023/2012 10:23:25 - INFO - Running runClean as root thru sysrun
13/023/2012 10:23:26 - ERROR - error: protocol fault (no status)
13/023/2012 10:23:27 - INFO - Device disconnected
Click to expand...
Click to collapse
The phone rebooted eventually, but has it worked?
edit 2: everything seems to be working fine. thanks for the help

[Q] plz help ME

I try very hard to install custom rom in my sony xperia x10i. But i failed plz help me any one.i also routed my phone so plz help me i begging u.i try to unlock boot loader but failed again and again .................
Routed? Ya mean rooted 2.3.3GB official firmware from sony? Okay,
1.what's your phone situation now, got logo once boot or blackscreen all the way ?
2.Now locked or unlocked bootloader?
3.What custom rom you trying to install?
4.Got flashed any custom kernel?
If I'm offline, feel free PM. I will try my best to reply as soon as possible.
Whitefang

[Guide]Fix HardBrick Of Meizu M2/Mini(Meilan2) Without Changing EMMC Every Time

Hello all :good: I am Back with an awesome guide
This is the most required guide for every Meizu Device user
This is for those who have hardbricked or bootlooped (with locked bootloader) And missing recovery. In there device while trying anything (including roms etc) :crying:
This guide is not like i am giving you flash tools to flash your phone Because in our case it is not possible with SP Flash tools (Due To Locked Bootloader) :crying:
In this guide I will inform you how you can get your bricked device back Not free you have to pay for it
Requirements :good:
1)Meizu M2/Mini{Meilan2} (those are different names of our device in different countries)
2)Some Money According to indian Currency its max 250rs or 300rs max (well some guys can ask you for more its your luck)
3)Firmware to flash your phone (See Down For Links)
4)Little Brain
Lets Start
Download Meizu M2/Mini Flash Frimware From Here :fingers-crossed:
Links are not valid anymore
You have to find a Mobile repairer Guy Who uses tools Like MRT Dongle,UFI Android Toolbox,Chiness Phone Flash Tools.Etc
In Short Tools That Can Bypass Meizu Security (Lock On Bootloader) There are Plenty of Tools that can do same
Just go to shop ask them to fix your phone if they say you need to change hardware tell them to try with those toolbox of android it will bypass security lock of Meizu and will flash the phone
It will be costly to buy them Sinle MRT Dongle Cost (3000 rs or more or less) so it is easy to repair them from professionals just explain them what is the problem and they will fix it (Most of meizu Custtomer Care Center loots the people by Chaning EMMC (Mother Board) of there phone Unless there is no need to do that
Sharing Personal Experience :good:
Even I had bricked my phone once i went to service centre (I Was Noob that time) they flashed my phone (with official tools and files) and in just 5 minutes my phone came back to alive :victory:
Every service centre guy is not same mostly in Indonesia i had seen many post regarding this issue they just change EMMC and charge big amount of it (nearly half of the phone cost) phone cost 6999rs price of changing EMMC 3000rs :crying:
This Guide Is Applicable for All Meizu Devices Find a device specific frimware or PM me i will help you to find a flash file for you which will fix your problem :good:
Note:A Guy Named Nguyễn Th
where is the guide?
maXDAmn said:
where is the guide?
Click to expand...
Click to collapse
up ?
gialaivn said:
prices: 10$-15$
work via teamviewer
email: [email protected]
fb.com/thanhdatPD
Click to expand...
Click to collapse
:3 lol 15×64=960rs
i still say my guide is better option ? can be done under 400,500 why waste more :v
gialaivn said:
:3
I begin work.
If more people, prices will decrease.
It is still a better solution than replacing emmc
:laugh::laugh::laugh:
Click to expand...
Click to collapse
looks like that you own that tools right?
wew *__*
:3 wew kul *___*
gialaivn said:
Mrt dongle ???
Click to expand...
Click to collapse
i still think that will not work :| because physical hardware is not present :v
I have the same problem... Can you fix it?
I confirm!
The man is a magician (or a professional ).
My device was in Hard Brick and Nguyễn Thành Đạt managed to save it.
I think he deserves to be paid for the work he did. The price he charges is relatively cheap in comparison to others.
Just one more thing:
Before I had a Hard Brick, my system version was: Flyme *.*.*.*G (Global).
Nguyễn Thành Đạt installed me the version: Flyme 5.1.7.0Y (Chinese).
So now I need to Unlock Bootloader & Install Twrp And Flash the Global version.
Let him know what system version you want - Maybe he could install it for you.
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
ChakibDEV said:
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
Click to expand...
Click to collapse
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Happy you solved your problem. I flashed flyme using both TWRP and stock recovery and the bootloader's still unlocked.
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
same here what to do?
i need firmware but download link is not working please help me
my device is bricked i need sp tool firmware please help
lyfhckr said:
my device is bricked i need sp tool firmware please help
Click to expand...
Click to collapse
You can't get it here dude.
Dwnld it from here.
http://www.softpedia.com/dyn-postdownload.php/6b986d7c8ddf22446036468c5cb3fa6c/5a0181bf/39687/0/1
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Hey man, just wanna ask how did you flash this temp_unlock_secro.img.. And where did you get it??
Pretty good!

Categories

Resources