Hi all
i have tried to unlock bootloader followed the steps that mentioned in the xda how do i know boot loader is unlocked? Cause when i put oodie prime rom it just stuck on sony ericson logo
thanks in advance to all
have you flashed a kernel for unlocked botloaders?
nbkhan said:
Hi all
i have tried to unlock bootloader followed the steps that mentioned in the xda how do i know boot loader is unlocked? Cause when i put oodie prime rom it just stuck on sony ericson logo
thanks in advance to all
Click to expand...
Click to collapse
"stuck on sony ericson logo" means you bootloader is locked
OR
You unlocked it & forgot to flash kernel
flash one of the kernels from here http://forum.xda-developers.com/showpost.php?p=19743047&postcount=1639
then button mash the volume down button and full wipe then install his rom
Hi
i have not put flash the kernel
i will give it a try and let u know
just reflashed the kernel and it work fine
thanks for help
Related
Hi all,
I have unlocked my bootloader with the steps from laser nice job ... then i installed the new doom kernel and everything was fine.... The only thing that was wrong was that i didnt could sent any sms. So i flashed the right baseband and the sms was fine but know i`ve got the se letters back....
So is my bootloader unlocked our what did i do wrong
i'm new, but..
ok i did not unlock my BL, but..
i think that unlocking the BL is permenant (u cannot relock/undo the unlock)
so, the 'Sony Ericsson' that you see now does not mean that you lost your bootloader. (i know that if u unlock BL, u gett a new boot screen, but maybe the bootscreen might have just accedentally rolled back to the original). i dont think bootloader can ever be deleted once unlocked. SO MATE, congrads, u still have the BOOTLOADER!
remco.k said:
Hi all,
I have unlocked my bootloader with the steps from laser nice job ... then i installed the new doom kernel and everything was fine.... The only thing that was wrong was that i didnt could sent any sms. So i flashed the right baseband and the sms was fine but know i`ve got the se letters back....
So is my bootloader unlocked our what did i do wrong
Click to expand...
Click to collapse
Flash doom kernel everything will be fine you flashed the stock kernel that is why you got old sony boot logo happened to me aswell
ok Super guys .... thanks for youre help
u can relock ur BL
Devin-J said:
ok i did not unlock my BL, but..
i think that unlocking the BL is permenant (u cannot relock/undo the unlock)
so, the 'Sony Ericsson' that you see now does not mean that you lost your bootloader. (i know that if u unlock BL, u gett a new boot screen, but maybe the bootscreen might have just accedentally rolled back to the original). i dont think bootloader can ever be deleted once unlocked. SO MATE, congrads, u still have the BOOTLOADER!
Click to expand...
Click to collapse
u can fully re-lock ur bootloader..with this thread http://forum.xda-developers.com/showthread.php?p=17494360
Hi guys. I had on my X8 Unlocked Bootloader, nAa Kernel and MiniCM7 2.1.7. Today i went into service to Sim-Unlock my phone. When they give me phone back there was Android 2.1. So i Rooted my phone again and flash kernel and restore ROM. There is my problem. My Bootloader is unlocked but when i turn on my phone with restored MiniCM on nAa logo its reboot and again and again. I cant boot my phone. So can i repair it without lose my Sim Unlock?? Pleas help me i want back my MiniCM7
Sorry for bad english ...
You must go to recovery and re-flash miniCM. After that do a full wipe, boot and if everything will be ok restore data partition.
I tried it but not working When I try to re-unlock bootloader i lose my sim-unlock ?
Thanks bro !! I use SEUS to install 2.1 and after i do re-flash of MiniCM as you tell me and it works Thanks again
RaDiS234 said:
I tried it but not working When I try to re-unlock bootloader i lose my sim-unlock ?
Click to expand...
Click to collapse
[Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro says ...
Note: Unlocking the bootloader of your phone will restore the original sim lock of your phone (if you had any) unless if you unlocked with EMMA/IMEI unlock code or it was factory-unlocked or if SE unlocked it!
Click to expand...
Click to collapse
I try very hard to install custom rom in my sony xperia x10i. But i failed plz help me any one.i also routed my phone so plz help me i begging u.i try to unlock boot loader but failed again and again .................
Routed? Ya mean rooted 2.3.3GB official firmware from sony? Okay,
1.what's your phone situation now, got logo once boot or blackscreen all the way ?
2.Now locked or unlocked bootloader?
3.What custom rom you trying to install?
4.Got flashed any custom kernel?
If I'm offline, feel free PM. I will try my best to reply as soon as possible.
Whitefang
Hello all :good: I am Back with an awesome guide
This is the most required guide for every Meizu Device user
This is for those who have hardbricked or bootlooped (with locked bootloader) And missing recovery. In there device while trying anything (including roms etc) :crying:
This guide is not like i am giving you flash tools to flash your phone Because in our case it is not possible with SP Flash tools (Due To Locked Bootloader) :crying:
In this guide I will inform you how you can get your bricked device back Not free you have to pay for it
Requirements :good:
1)Meizu M2/Mini{Meilan2} (those are different names of our device in different countries)
2)Some Money According to indian Currency its max 250rs or 300rs max (well some guys can ask you for more its your luck)
3)Firmware to flash your phone (See Down For Links)
4)Little Brain
Lets Start
Download Meizu M2/Mini Flash Frimware From Here :fingers-crossed:
Links are not valid anymore
You have to find a Mobile repairer Guy Who uses tools Like MRT Dongle,UFI Android Toolbox,Chiness Phone Flash Tools.Etc
In Short Tools That Can Bypass Meizu Security (Lock On Bootloader) There are Plenty of Tools that can do same
Just go to shop ask them to fix your phone if they say you need to change hardware tell them to try with those toolbox of android it will bypass security lock of Meizu and will flash the phone
It will be costly to buy them Sinle MRT Dongle Cost (3000 rs or more or less) so it is easy to repair them from professionals just explain them what is the problem and they will fix it (Most of meizu Custtomer Care Center loots the people by Chaning EMMC (Mother Board) of there phone Unless there is no need to do that
Sharing Personal Experience :good:
Even I had bricked my phone once i went to service centre (I Was Noob that time) they flashed my phone (with official tools and files) and in just 5 minutes my phone came back to alive :victory:
Every service centre guy is not same mostly in Indonesia i had seen many post regarding this issue they just change EMMC and charge big amount of it (nearly half of the phone cost) phone cost 6999rs price of changing EMMC 3000rs :crying:
This Guide Is Applicable for All Meizu Devices Find a device specific frimware or PM me i will help you to find a flash file for you which will fix your problem :good:
Note:A Guy Named Nguyễn Th
where is the guide?
maXDAmn said:
where is the guide?
Click to expand...
Click to collapse
up ?
gialaivn said:
prices: 10$-15$
work via teamviewer
email: [email protected]
fb.com/thanhdatPD
Click to expand...
Click to collapse
:3 lol 15×64=960rs
i still say my guide is better option ? can be done under 400,500 why waste more :v
gialaivn said:
:3
I begin work.
If more people, prices will decrease.
It is still a better solution than replacing emmc
:laugh::laugh::laugh:
Click to expand...
Click to collapse
looks like that you own that tools right?
wew *__*
:3 wew kul *___*
gialaivn said:
Mrt dongle ???
Click to expand...
Click to collapse
i still think that will not work :| because physical hardware is not present :v
I have the same problem... Can you fix it?
I confirm!
The man is a magician (or a professional ).
My device was in Hard Brick and Nguyễn Thành Đạt managed to save it.
I think he deserves to be paid for the work he did. The price he charges is relatively cheap in comparison to others.
Just one more thing:
Before I had a Hard Brick, my system version was: Flyme *.*.*.*G (Global).
Nguyễn Thành Đạt installed me the version: Flyme 5.1.7.0Y (Chinese).
So now I need to Unlock Bootloader & Install Twrp And Flash the Global version.
Let him know what system version you want - Maybe he could install it for you.
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
ChakibDEV said:
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
Click to expand...
Click to collapse
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Happy you solved your problem. I flashed flyme using both TWRP and stock recovery and the bootloader's still unlocked.
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
same here what to do?
i need firmware but download link is not working please help me
my device is bricked i need sp tool firmware please help
lyfhckr said:
my device is bricked i need sp tool firmware please help
Click to expand...
Click to collapse
You can't get it here dude.
Dwnld it from here.
http://www.softpedia.com/dyn-postdownload.php/6b986d7c8ddf22446036468c5cb3fa6c/5a0181bf/39687/0/1
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Hey man, just wanna ask how did you flash this temp_unlock_secro.img.. And where did you get it??
Pretty good!
I have a Xiaomi Redmi 2 (wt88047) with Mokee's history release on android 6.0.1 (MK60.1-wt88047-170418-HISTORY) installed.
Recovery : twrp 3.2.1-0.
I wanted to try out some other rom on my device but it seems that the bootloader is locked on my device by mokee rom. Ichecked this (bootloader status) by using the command--- fastboot oem device info.
This shows that bootloader of my device is locked . I read that trying to flash on a locked bootloader results in a bootloop which I dont want (obviously).
Hence what should I do to unlock the bootloader (if it is locked) or I can go forward and flash any rom as it is?
I know that redmi 2 ships with an unlocked bootloader but it appears that it is locked now.
Please help.
Thanks in advanced.
I don't have a Mokee ROM,but try to look for an option like on the screenshot.
Have a nice day.
Thanks for responding
I have done this but I don't know the steps to be followed after this . Can you help me with the steps to be followed after allowing oem unlock?
Unlocked
As i know bootloader is already unlocked out of the box...
Wt88047 didnt came with locked bootloader..
Strange it's locked after flashing mokke mm
shreyas_123 said:
Thanks for responding
I have done this but I don't know the steps to be followed after this . Can you help me with the steps to be followed after allowing oem unlock?
Click to expand...
Click to collapse
As far as I know, that's it. Now you can flash other ROMs, check if you've enabled android debugging and you good to go.
Dunaldo said:
As far as I know, that's it. Now you can flash other ROMs, check if you've enabled android debugging and you good to go.
Click to expand...
Click to collapse
I did just that and it worked out fine for me.(no bootloop)
Thanks once again for your advice.:good:
Now I'm using AEX v4.6.