Hi,
I have seen people over-clock their HD2 to 1.5GHz,
Is this at all safe to do?
If so can it be done on an SD build for example Boxmax Runnymead V6.5
I understand you need a certain kernal, which one?
Thanks,
Alex
Yes it's safe
Your phone will go onto that speed only if it's needed and afterwards slow down.
I don't know the sd kernels but if you use dorimanx kernel for nand Roms (will work on every nand rom) you will have that feature.
Press the thanks button
Sent from my HTC HD2 using xda premium
alex.odell.2011 said:
Hi,
I have seen people over-clock their HD2 to 1.5GHz,
Is this at all safe to do?
If so can it be done on an SD build for example Boxmax Runnymead V6.5
I understand you need a certain kernal, which one?
Thanks,
Alex
Click to expand...
Click to collapse
To over clock on an sd build you have to edit your startup.txt .
Sent from my GT-I9100 using Tapatalk
I have last dorimax kernel,i use it since 3.2 version.Now it s about 1 mounth that my hd2 cpu is clocked @ max 1612Mhz and min 96Mhz (possible from 3.8)
Great performance with zram enabled,the phone is ultra fast and is not hot.
elesbb said:
To over clock on an sd build you have to edit your startup.txt .
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
How do you do that?
alex.odell.2011 said:
How do you do that?
Click to expand...
Click to collapse
The startup.txt should be in the same folder as the other sd rom files you download when choosing a rom. Just open it with notepad and make your changes.
chrisrj28 said:
The startup.txt should be in the same folder as the other sd rom files you download when choosing a rom. Just open it with notepad and make your changes.
Click to expand...
Click to collapse
I have no reference to "cpu frequencys" what text would I have to put, and where to set the min value to 384MHz to 1.5GHz.
Thanks guys
Isn't it possible to change CPU Frequencies by using SetCPU or is it SDCard relatet?
alex.odell.2011 said:
I have no reference to "cpu frequencys" what text would I have to put, and where to set the min value to 384MHz to 1.5GHz.
Thanks guys
Click to expand...
Click to collapse
This is the command you MUST use to set the overclock kernel speeds.
This is just an example , the 614400 is the speed in Khz . so Mhz would be 614.4 but the code in the text file must be in khz. It must be entered in between the quotes after the "set cmdline"
Code:
acpuclock.oc_freq_khz=614400 for 614.4 MHz. Choose multiples of 19.2 MHz
here i have an example of a simple startup.txt file also with the location of the cpu clock speed preset.
Code:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path='Your path to android on SD' acpuclock.oc_freq_khz=614400"
boot
domimatik said:
Isn't it possible to change CPU Frequencies by using SetCPU or is it SDCard relatet?
Click to expand...
Click to collapse
SetCPU only "forces" which speeds to be used , the speeds must first be set by the kernel which is what the above command does in the startup.txt
Then you would use SetCPU to set the min and max frequencies of choice
elesbb said:
This is the command you MUST use to set the overclock kernel speeds.
This is just an example , the 614400 is the speed in Khz . so Mhz would be 614.4 but the code in the text file must be in khz. It must be entered in between the quotes after the "set cmdline"
Code:
acpuclock.oc_freq_khz=614400 for 614.4 MHz. Choose multiples of 19.2 MHz
here i have an example of a simple startup.txt file also with the location of the cpu clock speed preset.
Code:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path='Your path to android on SD' acpuclock.oc_freq_khz=614400"
boot
SetCPU only "forces" which speeds to be used , the speeds must first be set by the kernel which is what the above command does in the startup.txt
Then you would use SetCPU to set the min and max frequencies of choice
Click to expand...
Click to collapse
Tried that but it didn't apply I did "1497600",
That just caused more lag?!?
Thanks
alex.odell.2011 said:
Tried that but it didn't apply I did "1497600",
That just caused more lag?!?
Thanks
Click to expand...
Click to collapse
did you then use SetCPU to set the Max clock speed ? and to set the proper governers ? and you have the code at the correct spot too right ? double and tripple check . also is it a multiple of 19.2 ?
elesbb said:
did you then use SetCPU to set the Max clock speed ? and to set the proper governers ? and you have the code at the correct spot too right ? double and tripple check . also is it a multiple of 19.2 ?
Click to expand...
Click to collapse
Ok I will reinstall android and try 1478400,
Alex
alex.odell.2011 said:
Ok I will reinstall android and try 1478400,
Alex
Click to expand...
Click to collapse
If you are doing everything correctly it should work without a problem . We will figure it out though
Hi guys tried it again,
No luck,
I am using Hasterin SenBT 8.6 (I think :S)
No luck, Maybe the kernal does not support OC,
Here is my "Startup.txt"
##BoxmaX S3.5 Runny v6.5##
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=Android data_size=1024 acpuclock.oc_freq_khz=1478400 nand_boot=0"
boot
alex.odell.2011 said:
Hi guys tried it again,
No luck,
I am using Hasterin SenBT 8.6 (I think :S)
No luck, Maybe the kernal does not support OC,
Here is my "Startup.txt"
##BoxmaX S3.5 Runny v6.5##
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=Android data_size=1024 acpuclock.oc_freq_khz=1478400 nand_boot=0"
boot
Click to expand...
Click to collapse
Can you link me to the ROM ? also are you able to boot at all ?
elesbb said:
Can you link me to the ROM ? also are you able to boot at all ?
Click to expand...
Click to collapse
Hi,
Yes it boots fine, running it now, great build I have 1.2GHz overclock as stock on build.
here you go...
http://forum.xda-developers.com/showthread.php?t=1256423
alex.odell.2011 said:
Hi,
Yes it boots fine, running it now, great build I have 1.2GHz overclock as stock on build.
here you go...
http://forum.xda-developers.com/showthread.php?t=1256423
Click to expand...
Click to collapse
Hmmm i see nothing about Overclocking on his thread , after you set the OC speed in your startup.txt can you still boot ? and check via SetCPU what the max cpu clock speed is at . it might be a simple format error .
elesbb said:
Hmmm i see nothing about Overclocking on his thread , after you set the OC speed in your startup.txt can you still boot ? and check via SetCPU what the max cpu clock speed is at . it might be a simple format error .
Click to expand...
Click to collapse
I have tried it again and it boots fine, when I go into SetCPU it just says the max speed is 1.2GHz ?!?!
Strange?
alex.odell.2011 said:
I have tried it again and it boots fine, when I go into SetCPU it just says the max speed is 1.2GHz ?!?!
Strange?
Click to expand...
Click to collapse
Hmm my only guess is the clock speed is hardwired into the kernel , id contact the dev of that ROM and ask him . It seems like OC is set by default
Sounds possible. Thanks for your help. 1.2GHz is still fast and safer I guess.
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Related
Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.
just making sure... but are you running it from your sd card?
im sorry but how hard is it to read the post FAQ & Instructions on hd2 android discussion?
download > extract > copy paste into sd card > run Haret and ur done
OP: you have the wrong device type (mtype) specified... Leo = 2524. mtype 1667 = HTC Kaiser, I believe...
set mtype 2524
set ramaddr 0x20000000
set ramsize 0x0fc00000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline ""
boot
If you have a Leo (HD2), then you grabbed the wrong startup (and likely wrong HaRET version)
Haret
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.
miksi said:
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.
Click to expand...
Click to collapse
check your radio.
I had this problem after flashing an official ROM. Took me ages to notice it had installed a lower Radio
Assuming you have gotten andoird working - why dont you just use this setting
set RAMSIZE 0x1A000000 (412MB) = 32*7
HD2 has 484MB right
I Tried 0x1C000000 - but that bum'd out .. so reducing it by 32MB , (maybe the working memory needed for the loaders to work ? .. who knows) ..
works fine now ..
uhmmm....it should be called startup.txt not default.txt, that's a good place to start (no pun intended)
Here is my issue
Downloaded the American Android 2.3 for TMOUS->Extracted Android folder to blank SD card /sdcard/Android->Opened up file manager on HTC HD2 /sdcard/Android and ran clrcad.exe got the untrusted popup clicked okay->Ran haret.exe got popup again clicked okay then saw a few white command lines (maybe 5) then the green HTC logo appears and sits there for ever. I let it sit for 30 min and no change had to pull the battery and restart windows. Phone is up to date only difference might be is it has been unlocked through T-Mobile. Does anyone know how to avoid this?
Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/
war3s said:
Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/
Click to expand...
Click to collapse
If you find a solution elsewhere let me know, I'm still looking. Are you trying to install the American Android 2.3 Gingerbread ROM? That is the only one I have tried because I have heard it's the best with fewest bugs.
Stephducated20 said:
Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.
Click to expand...
Click to collapse
me too have same problem please help any one
(thanks again to ripnard) zimage and wifi fix 12 aug 2010
Ex2 and setup.txt and latest zimage - packaged here for Mattc 1.5 only.
as Before:-
Download Mattc 1.5 from here http://forum.xda-developers.com/showthread.php?t=736545
(I also use the rootfs on the first post that creates a 1gb Data img data store file on first boot, rather than 512mb )
Save/Unpack the mattc 1.5 zip to your Android folder on root of sd card
Then download the "build fix" below and unpack the 3 files again into sdcard/Android folder, overwriting the existing files.
http://www.megaupload.com/?d=01SJXE04
This link includes the latest zimage (for 422mb full ram) from here: http://oe.netripper.com/files/htcleo_autobuild/
zImage-htcleo-latest 12-Aug-2010 14:46 2.0M
and the latest wifi driver included in (believe this enables wifi n?)
modules-htcleo-latest.tgz 12-Aug-2010 14:46 842K
----------------------------------------------------------------------------
Also (i case you want super fast speeds here is a Mattc fix patch (deploy as per above and instead of) that includes the undervolted (925mv instead of 1050mv so should save battery) and overclocked to 1.11 ghz and full ram (422mb) zimage from http://forum.xda-developers.com/show...php?t=746997:- zImage_925mv_v0.3.zip (with thanks to huanyu !)
This also includes the respective wifi patch.
http://www.megaupload.com/?d=GU0RI61Y
With the second one I now get 30fps in neocore, 1550+ in quandrant and 41 MFLOPS in linpack
Note: On both of these builds wifi works fine - it just doesnt start at bootup. You have to turn it on by going into the wireless settings and ignoring the "error" status and enable it anyway
{thanks to ripnard} 07-aug-2010
Download Mattc 1.5 from here http://forum.xda-developers.com/showthread.php?t=736545
(I also use the rootfs on the first post that creates a 1gb Data img data store file on first boot, rather than 512mb )
Save/Unpack the mattc 1.5 zip to your Android folder on root of sd card
Then download this below and unpack the 3 files again into sdcard/Android folder, overwriting the existing files. #
(Note: I have renamed the file "zimage" to "image" and it will use that in case you want to return to the orginal non full ram zimage (think its 384mb the orginal) . Also setup is editable back to old settings)
http://www.megaupload.com/?d=4MOPIX9H
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
{thanks to gringo313} 10-aug-2010 all file for froyostone with sens
http://www.megaupload.com/?d=O9CL6AQM
replace files : system.txt2,startup.txt,clrad,haret,zImage in android folder
thx manusfreedom for patch fullram
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
{thanks to crazy_cbr} 11-aug-2010
Full Build ShubCraft 1.2b + 400Mb + WiFi
http://www.zshare.net/download/79230143f2f412f8/
then apply the update:
UPDATE 422Mb (System Info Quadrant) (zimage 11-Aug-2010 02:28)
http://www.megaupload.com/?d=5YM14VH4
i tried the 7/8 zimage, 3d games play smoother than before ^_^
-------------------------------------
My FroyoStone is Non-Sense
foxcheng said:
i tried the 7/8 zimage, 3d games play smoother than before ^_^
-------------------------------------
My FroyoStone is Non-Sense
Click to expand...
Click to collapse
so it works good and fast?
I dont even know how to install it, can u guys tell me what to do with the startup.txt
thanks
atoore said:
I dont even know how to install it, can u guys tell me what to do with the startup.txt
thanks
Click to expand...
Click to collapse
thats what im trying to learn myself?
foxcheng said:
i tried the 7/8 zimage, 3d games play smoother than before ^_^
-------------------------------------
My FroyoStone is Non-Sense
Click to expand...
Click to collapse
pls share what u change in startup.txt
I tried everything. I was using shubCRAFT rom and tried to boot into droid with the full ram zimage but it wont boot up. I guess something wrong with the startup.txt
atoore said:
I tried everything. I was using shubCRAFT rom and tried to boot into droid with the full ram zimage but it wont boot up. I guess something wrong with the startup.txt
Click to expand...
Click to collapse
yea i tried to same here can anybody help??????????
wawa144st said:
yea i tried to same here can anybody help??????????
Click to expand...
Click to collapse
http://htcleo.noobhands.net/manusfreedom/default.FULLRAM.txt
basst85 said:
http://htcleo.noobhands.net/manusfreedom/default.FULLRAM.txt
Click to expand...
Click to collapse
Thanks for the effort dude. I already tried missing around with that txt before and still wont boot up. Should I just copy all that into txt and then rename it to startup.txt?
basst85 said:
http://htcleo.noobhands.net/manusfreedom/default.FULLRAM.txt
Click to expand...
Click to collapse
i seen that and tried it but wont boot can you explain how to do it for us please?
atoore said:
Thanks for the effort dude. I already tried missing around with that txt before and still wont boot up. Should I just copy all that into txt and then rename it to startup.txt?
Click to expand...
Click to collapse
i tried that but no boot up it just stop with the little words at the top left
set mtype 2524
set ramaddr 0x18000000
set ramsize 0x17c00000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android lpj=638976"
boot
this is for the 380mb ram zImage
set mtype 2524
set ramaddr 0x12800000
set ramsize 0x1d300000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android lpj=638976"
boot
this is for the FULL ram zImage
note; this setup works if your install is in a folder called Android, if it isnt, then remove the rel_path=Android text in the startup file
the full ram zImage workse wonderfully, but i got black lines on some graphics, so im running the 380mb, been having issues with SOD as well :/
shrinex said:
set mtype 2524
set ramaddr 0x18000000
set ramsize 0x17c00000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android lpj=638976"
boot
this is for the 380mb ram zImage
set mtype 2524
set ramaddr 0x12800000
set ramsize 0x1d300000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android lpj=638976"
boot
this is for the FULL ram zImage
note; this setup works if your install is in a folder called Android, if it isnt, then remove the rel_path=Android text in the startup file
the full ram zImage workse wonderfully, but i got black lines on some graphics, so im running the 380mb, been having issues with SOD as well :/
Click to expand...
Click to collapse
ok so do we create i start up with those codes in it?
wawa144st said:
ok so do we create i start up with those codes in it?
Click to expand...
Click to collapse
sorry, yes, yes you do
this exact setup works for me and my TMOUS HD2
Thank you so much but noob question. What SOD stands for? and can I use it with FroyoStone sence rom installed on my hd2?
thanks aggain...
shrinex said:
sorry, yes, yes you do
this exact setup works for me and my TMOUS HD2
Click to expand...
Click to collapse
i tried that but its not booting for the zimages is giving red x
atoore said:
Thank you so much but noob question. What SOD stands for? and can I use it with FroyoStone sence rom installed on my hd2?
thanks aggain...
Click to expand...
Click to collapse
Sleep Of Death
it usually occurs when you put the phone in sleep and it doesnt wake up, the screen turns on, but it's pure black. hard reset/batt pull fixes this, it's just a pure PITA >_<
and you can use this with anybuild
wawa144st said:
i tried that but its not booting for the zimages is giving red x
Click to expand...
Click to collapse
is your android version in an android folder or in the root of the sdcard?
and what version as well...
what you might want to do is use the original startup.txt for your build and replace the ramddr and ramsize with the one i have in mines, thats really the only difference
aww yea... thx for the startup file, working much more responsive with the full ram, on the Mattc r1.5 Frodo, lol.
I got freeze problem on jumping to kernel.
In startup.txt most of build version are using this setting
set ramaddr 0x11800000
set ramsize 0x1e400000
I have tried many different Radio/Rom/SD card, add a cmdline "rel_path=Android"
but still have freeze problem.
Here is my phone detail
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
siumonmon said:
I got freeze problem on jumping to kernel.
In startup.txt most of build version are using this setting
set ramaddr 0x11800000
set ramsize 0x1e400000
I have tried many different Radio/Rom/SD card, add a cmdline "rel_path=Android"
but still have freeze problem.
Here is my phone detail
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
is it a EU or TmoUS? other?
is it a pre-production sample/prototype? afaik those models had only ~380? MB RAM.
I donth think anyone will be able to help you unless you provide the model details etc.
thesweeney said:
is it a EU or TmoUS? other?
is it a pre-production sample/prototype? afaik those models had only ~380? MB RAM.
I donth think anyone will be able to help you unless you provide the model details etc.
Click to expand...
Click to collapse
SN :HT03PNWxxxxx
IMEI :3541200369xxxxx
Part Number :99HJY0xx-xx
Part Description :SKU,CSL,Traditional Chinese,HKG,HTC,Regional ID Low,RigidGray,w/o SIM Lock,LEO-L9
Now I am using Energy Rom with radio 2.12.50.02_2
Hardware information in winmo
CPU :QUALCOMM(R) 8250B
Speed: 1024 MHz
RAM size: 576MB
Flash memory size: 512MB
Data bus: 32bits
Software Information in winmo
OS version: 5.2.23678 (23678.5.3.8)
Mainila: 2.5.20183025.0
ROM version 25 Aug 2010 WWE
No suggestion??
siumonmon said:
No suggestion??
Click to expand...
Click to collapse
Sorry no clue
Do you have the android files in a folder called android or on the root of the sd?
If they are on the root of the SD then try deleteing a folder called "Android" if it exists.
Sounds like its possibly a problem with the startup txt though.
What builds have you tried? are they all giving a jump to kernel error?
Just trying to get some more info some someone with more knowledge than myself might be able to help you
thesweeney said:
Sorry no clue
Do you have the android files in a folder called android or on the root of the sd?
If they are on the root of the SD then try deleteing a folder called "Android" if it exists.
Sounds like its possibly a problem with the startup txt though.
What builds have you tried? are they all giving a jump to kernel error?
Just trying to get some more info some someone with more knowledge than myself might be able to help you
Click to expand...
Click to collapse
1. All files in "Android" folder
2. All version I have tried by "new install" format SD card by winmo,windows & sdformatter
3. In startup.txt file added set cmdline "rel_path=Android"
4. Freeze on "jump to kernel" problem happen on every build version if their statup.txt have these two lines:
set ramaddr 0x11800000
set ramsize 0x1e400000
such as
mattc Leo + Froyo w/Sense 1.6b
shubCRAFT 1.4d
darkstone HD2Froyo V2.1
mattc NexusLeo v1.1
Xcelsior's Android FroYo V1.00a
siumonmon said:
1. All files in "Android" folder
2. All version I have tried by "new install" format SD card by winmo,windows & sdformatter
3. In startup.txt file added set cmdline "rel_path=Android"
4. Freeze on "jump to kernel" problem happen on every build version if their statup.txt have these two lines:
set ramaddr 0x11800000
set ramsize 0x1e400000
such as
mattc Leo + Froyo w/Sense 1.6b
shubCRAFT 1.4d
darkstone HD2Froyo V2.1
mattc NexusLeo v1.1
Xcelsior's Android FroYo V1.00a
Click to expand...
Click to collapse
hmm ok...
free bump and one last shot in the dark from me.
what speed class sd card are you using? does it have enough capacity? (using a 512mb card would give problems, maybe even 1gb?).
could the card be corrupt/faulty? can you try a different card?
other than that, im all out of ideas/suggestions sorry
thesweeney said:
hmm ok...
free bump and one last shot in the dark from me.
what speed class sd card are you using? does it have enough capacity? (using a 512mb card would give problems, maybe even 1gb?).
could the card be corrupt/faulty? can you try a different card?
other than that, im all out of ideas/suggestions sorry
Click to expand...
Click to collapse
First, thanks for your reply,
but... totaly, I have tried many micro sd card: 4GB/8GB/16GB and all is class 4, so i don't think freeze problem is from memory card.
No one can help??
Do you have this in your startup.txt?
set initrd_offset 0x00a00000
Your radio 2.12.50.02_2 is correct.
Here is my startup.txt that works:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set initrd initrd.gz
set kernel zImage
set cmdline "rel_path=Android"
boot
(this is the default startup.txt of shubcraft and most new builds)
Are you using some other startup.txt that doesn't come with shubcraft or mattc? Since the original startup.txt should work right out of the box, no edit/change is needed. Did you try downloading an old build that doesn't have full ram support? (from: www.gamesquare.co.uk)
siumonmon said:
Freeze on "jump to kernel" problem happen on every build version if their statup.txt have these two lines:
set ramaddr 0x11800000
set ramsize 0x1e400000
Click to expand...
Click to collapse
All full ram kernels need those lines. Old low ram kernels need different values. Since those values are correct, your problem is NOT those lines. Check my above startup.txt and see if something is missing in yours. (I can't understand why some line might be missing since startup.txt comes with builds)
memin1857 said:
Do you have this in your startup.txt?
set initrd_offset 0x00a00000
Your radio 2.12.50.02_2 is correct.
Here is my startup.txt that works:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set initrd initrd.gz
set kernel zImage
set cmdline "rel_path=Android"
boot
(this is the default startup.txt of shubcraft and most new builds)
Are you using some other startup.txt that doesn't come with shubcraft or mattc? Since the original startup.txt should work right out of the box, no edit/change is needed. Did you try downloading an old build that doesn't have full ram support? (from: www.gamesquare.co.uk)
All full ram kernels need those lines. Old low ram kernels need different values. Since those values are correct, your problem is NOT those lines. Check my above startup.txt and see if something is missing in yours. (I can't understand why some line might be missing since startup.txt comes with builds)
Click to expand...
Click to collapse
Thanks for your reply, first I think some misunderstanding my question...
My Question is my HD2 cannot use all build version with "All full ram kernels" and hope someone can have suggestion for me...
My startup.txt file is same as you told above, and tried to change radio/rom/sdcard; all files in"Android" folder, but still freeze on "jump to kernel" when start...
And "Old low ram kernels" build version such as mattc1.4 or shubcraft1.1
I can use these perfectly without any problem, but only 256M ram and cannot run App smoothly...
Does anyone know the startup.txt file modification? any option/cmdline can add/edit/change?
up up up
try
set cmdline "rel_path=sdcard\Android"
instead of
set cmdline "rel_path=Android"
I have solved it with it. you may try it.
i really need help with this too.. I tried all radios and 5 different WM Roms that have worked before.. but after getting an SD unmountable error that stopped android from running my shubcraft, flashing a new android rom gives me a "jumping to kernel" everytime. task 29, reformatting memory cards, hpsl is good and new WM roms will not help. anything new i can try to fix this would be amazing
i have a 1024 flash size after i download the hspl to my phone, what is the next step after that. if i can have the right roms, or builds please
http://forum.xda-developers.com/showthread.php?t=768048
here is a android build and all info on what windows rom and radio to use all in first and second post
another question??
Do you keep your dpi_res or lcd_res to 180? or do you change it to 240, another thing the gpd is it suppose to look like this
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us.pool.ntp.org"
boot
last question
after i download hspl3 to my phone and i keep my radio at 2.10 what are the steps after installing your program is it put it directly on your sd card and load if from there or what???
phillycannon19 said:
Do you keep your dpi_res or lcd_res to 180? or do you change it to 240, another thing the gpd is it suppose to look like this
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us.pool.ntp.org"
boot
Click to expand...
Click to collapse
My dpi is at normal 240 and you would have to look up your own GPS settings
Sent from my HTC HD2 using XDA App
phillycannon19 said:
after i download hspl3 to my phone and i keep my radio at 2.10 what are the steps after installing your program is it put it directly on your sd card and load if from there or what???
Click to expand...
Click to collapse
If you read the first two post on that thread he tells you exactly what to do
Sent from my HTC HD2 using XDA App
i read the `st to post but it didn't explain the steps, but i install hspl, then i install my radio, after that what is the next step????
--------------------------------------------------------------------------------
i read the first two post but it didn't explain the steps, but i install hspl, then i install my radio, after that what is the next step please???? you been a good help i will definitly donate to you thank tou
at the bootom of first post he tells what he is using
ChuckyDroid Rom (with FD DriodBoot cooked in) and radio 2.12.50
http://forum.xda-developers.com/showthread.php?t=734238
chuckydroid rom
Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.
You can, I do it all the time
Sent from my HTC HD2 using the XDA mobile application powered by Tapatalk
typongtv said:
Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.
Click to expand...
Click to collapse
This is possible. First you must rename the android folders like you mentioned. Then also edit the startup.txt now its set cmdline "rel_path=Android" to cmdline "rel_path=Android Mdeejay Desire HD" etc
Thank you Henv I'll do it now
And for your own convenience, use a multiple boot loader found here or here
Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"
typongtv said:
Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"
Click to expand...
Click to collapse
You must put my line into you're cmdline. So it will be
set cmdline "rel_path=Android nand_boot=0" where you edit android with the name youre give your folder
so i should not erase the nand_boot=0 ?
typongtv said:
so i should not erase the nand_boot=0 ?
Click to expand...
Click to collapse
That's correct. You can take the line I earlier mentioned and only change android and replace the line in you're startup
Sent from HD2
I tried it all, i tried carefully and i even tried the multi loader app....i tried with many different roms....
Not working......
maybe this is the one thing my HD2 won't do
Anyone had the same problem ?
still wondering why is it not working with me .....!
typongtv said:
still wondering why is it not working with me .....!
Click to expand...
Click to collapse
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name
henv said:
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name
Click to expand...
Click to collapse
Thanx henv...I'll try that.