Database Users

HTC HD2 HaRET for Android Help!!!!!!!

Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.

just making sure... but are you running it from your sd card?

im sorry but how hard is it to read the post FAQ & Instructions on hd2 android discussion?
download > extract > copy paste into sd card > run Haret and ur done

OP: you have the wrong device type (mtype) specified... Leo = 2524. mtype 1667 = HTC Kaiser, I believe...
set mtype 2524
set ramaddr 0x20000000
set ramsize 0x0fc00000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline ""
boot
If you have a Leo (HD2), then you grabbed the wrong startup (and likely wrong HaRET version)

Haret
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.

miksi said:
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.
Click to expand...
Click to collapse
check your radio.
I had this problem after flashing an official ROM. Took me ages to notice it had installed a lower Radio

Assuming you have gotten andoird working - why dont you just use this setting
set RAMSIZE 0x1A000000 (412MB) = 32*7
HD2 has 484MB right
I Tried 0x1C000000 - but that bum'd out .. so reducing it by 32MB , (maybe the working memory needed for the loaders to work ? .. who knows) ..
works fine now ..

uhmmm....it should be called startup.txt not default.txt, that's a good place to start (no pun intended)

Here is my issue
Downloaded the American Android 2.3 for TMOUS->Extracted Android folder to blank SD card /sdcard/Android->Opened up file manager on HTC HD2 /sdcard/Android and ran clrcad.exe got the untrusted popup clicked okay->Ran haret.exe got popup again clicked okay then saw a few white command lines (maybe 5) then the green HTC logo appears and sits there for ever. I let it sit for 30 min and no change had to pull the battery and restart windows. Phone is up to date only difference might be is it has been unlocked through T-Mobile. Does anyone know how to avoid this?

Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/

war3s said:
Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/
Click to expand...
Click to collapse
If you find a solution elsewhere let me know, I'm still looking. Are you trying to install the American Android 2.3 Gingerbread ROM? That is the only one I have tried because I have heard it's the best with fewest bugs.

Stephducated20 said:
Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.
Click to expand...
Click to collapse
me too have same problem please help any one

[Q] HELP - All of fullram builded version cannot run on my HD2

I got freeze problem on jumping to kernel.
In startup.txt most of build version are using this setting
set ramaddr 0x11800000
set ramsize 0x1e400000
I have tried many different Radio/Rom/SD card, add a cmdline "rel_path=Android"
but still have freeze problem.
Here is my phone detail
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40

siumonmon said:
I got freeze problem on jumping to kernel.
In startup.txt most of build version are using this setting
set ramaddr 0x11800000
set ramsize 0x1e400000
I have tried many different Radio/Rom/SD card, add a cmdline "rel_path=Android"
but still have freeze problem.
Here is my phone detail
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
is it a EU or TmoUS? other?
is it a pre-production sample/prototype? afaik those models had only ~380? MB RAM.
I donth think anyone will be able to help you unless you provide the model details etc.

thesweeney said:
is it a EU or TmoUS? other?
is it a pre-production sample/prototype? afaik those models had only ~380? MB RAM.
I donth think anyone will be able to help you unless you provide the model details etc.
Click to expand...
Click to collapse
SN :HT03PNWxxxxx
IMEI :3541200369xxxxx
Part Number :99HJY0xx-xx
Part Description :SKU,CSL,Traditional Chinese,HKG,HTC,Regional ID Low,RigidGray,w/o SIM Lock,LEO-L9
Now I am using Energy Rom with radio 2.12.50.02_2
Hardware information in winmo
CPU :QUALCOMM(R) 8250B
Speed: 1024 MHz
RAM size: 576MB
Flash memory size: 512MB
Data bus: 32bits
Software Information in winmo
OS version: 5.2.23678 (23678.5.3.8)
Mainila: 2.5.20183025.0
ROM version 25 Aug 2010 WWE

No suggestion??

siumonmon said:
No suggestion??
Click to expand...
Click to collapse
Sorry no clue
Do you have the android files in a folder called android or on the root of the sd?
If they are on the root of the SD then try deleteing a folder called "Android" if it exists.
Sounds like its possibly a problem with the startup txt though.
What builds have you tried? are they all giving a jump to kernel error?
Just trying to get some more info some someone with more knowledge than myself might be able to help you

thesweeney said:
Sorry no clue
Do you have the android files in a folder called android or on the root of the sd?
If they are on the root of the SD then try deleteing a folder called "Android" if it exists.
Sounds like its possibly a problem with the startup txt though.
What builds have you tried? are they all giving a jump to kernel error?
Just trying to get some more info some someone with more knowledge than myself might be able to help you
Click to expand...
Click to collapse
1. All files in "Android" folder
2. All version I have tried by "new install" format SD card by winmo,windows & sdformatter
3. In startup.txt file added set cmdline "rel_path=Android"
4. Freeze on "jump to kernel" problem happen on every build version if their statup.txt have these two lines:
set ramaddr 0x11800000
set ramsize 0x1e400000
such as
mattc Leo + Froyo w/Sense 1.6b
shubCRAFT 1.4d
darkstone HD2Froyo V2.1
mattc NexusLeo v1.1
Xcelsior's Android FroYo V1.00a

siumonmon said:
1. All files in "Android" folder
2. All version I have tried by "new install" format SD card by winmo,windows & sdformatter
3. In startup.txt file added set cmdline "rel_path=Android"
4. Freeze on "jump to kernel" problem happen on every build version if their statup.txt have these two lines:
set ramaddr 0x11800000
set ramsize 0x1e400000
such as
mattc Leo + Froyo w/Sense 1.6b
shubCRAFT 1.4d
darkstone HD2Froyo V2.1
mattc NexusLeo v1.1
Xcelsior's Android FroYo V1.00a
Click to expand...
Click to collapse
hmm ok...
free bump and one last shot in the dark from me.
what speed class sd card are you using? does it have enough capacity? (using a 512mb card would give problems, maybe even 1gb?).
could the card be corrupt/faulty? can you try a different card?
other than that, im all out of ideas/suggestions sorry

thesweeney said:
hmm ok...
free bump and one last shot in the dark from me.
what speed class sd card are you using? does it have enough capacity? (using a 512mb card would give problems, maybe even 1gb?).
could the card be corrupt/faulty? can you try a different card?
other than that, im all out of ideas/suggestions sorry
Click to expand...
Click to collapse
First, thanks for your reply,
but... totaly, I have tried many micro sd card: 4GB/8GB/16GB and all is class 4, so i don't think freeze problem is from memory card.

No one can help??

Do you have this in your startup.txt?
set initrd_offset 0x00a00000
Your radio 2.12.50.02_2 is correct.
Here is my startup.txt that works:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set initrd initrd.gz
set kernel zImage
set cmdline "rel_path=Android"
boot
(this is the default startup.txt of shubcraft and most new builds)
Are you using some other startup.txt that doesn't come with shubcraft or mattc? Since the original startup.txt should work right out of the box, no edit/change is needed. Did you try downloading an old build that doesn't have full ram support? (from: www.gamesquare.co.uk)
siumonmon said:
Freeze on "jump to kernel" problem happen on every build version if their statup.txt have these two lines:
set ramaddr 0x11800000
set ramsize 0x1e400000
Click to expand...
Click to collapse
All full ram kernels need those lines. Old low ram kernels need different values. Since those values are correct, your problem is NOT those lines. Check my above startup.txt and see if something is missing in yours. (I can't understand why some line might be missing since startup.txt comes with builds)

memin1857 said:
Do you have this in your startup.txt?
set initrd_offset 0x00a00000
Your radio 2.12.50.02_2 is correct.
Here is my startup.txt that works:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set initrd initrd.gz
set kernel zImage
set cmdline "rel_path=Android"
boot
(this is the default startup.txt of shubcraft and most new builds)
Are you using some other startup.txt that doesn't come with shubcraft or mattc? Since the original startup.txt should work right out of the box, no edit/change is needed. Did you try downloading an old build that doesn't have full ram support? (from: www.gamesquare.co.uk)
All full ram kernels need those lines. Old low ram kernels need different values. Since those values are correct, your problem is NOT those lines. Check my above startup.txt and see if something is missing in yours. (I can't understand why some line might be missing since startup.txt comes with builds)
Click to expand...
Click to collapse
Thanks for your reply, first I think some misunderstanding my question...
My Question is my HD2 cannot use all build version with "All full ram kernels" and hope someone can have suggestion for me...
My startup.txt file is same as you told above, and tried to change radio/rom/sdcard; all files in"Android" folder, but still freeze on "jump to kernel" when start...
And "Old low ram kernels" build version such as mattc1.4 or shubcraft1.1
I can use these perfectly without any problem, but only 256M ram and cannot run App smoothly...
Does anyone know the startup.txt file modification? any option/cmdline can add/edit/change?

up up up

try
set cmdline "rel_path=sdcard\Android"
instead of
set cmdline "rel_path=Android"
I have solved it with it. you may try it.

i really need help with this too.. I tried all radios and 5 different WM Roms that have worked before.. but after getting an SD unmountable error that stopped android from running my shubcraft, flashing a new android rom gives me a "jumping to kernel" everytime. task 29, reformatting memory cards, hpsl is good and new WM roms will not help. anything new i can try to fix this would be amazing

[Q] Android folder renaming

Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.

You can, I do it all the time
Sent from my HTC HD2 using the XDA mobile application powered by Tapatalk

typongtv said:
Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.
Click to expand...
Click to collapse
This is possible. First you must rename the android folders like you mentioned. Then also edit the startup.txt now its set cmdline "rel_path=Android" to cmdline "rel_path=Android Mdeejay Desire HD" etc

Thank you Henv I'll do it now

And for your own convenience, use a multiple boot loader found here or here

Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"

typongtv said:
Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"
Click to expand...
Click to collapse
You must put my line into you're cmdline. So it will be
set cmdline "rel_path=Android nand_boot=0" where you edit android with the name youre give your folder

so i should not erase the nand_boot=0 ?

typongtv said:
so i should not erase the nand_boot=0 ?
Click to expand...
Click to collapse
That's correct. You can take the line I earlier mentioned and only change android and replace the line in you're startup
Sent from HD2

I tried it all, i tried carefully and i even tried the multi loader app....i tried with many different roms....
Not working......
maybe this is the one thing my HD2 won't do
Anyone had the same problem ?

still wondering why is it not working with me .....!

typongtv said:
still wondering why is it not working with me .....!
Click to expand...
Click to collapse
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name

henv said:
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name
Click to expand...
Click to collapse
Thanx henv...I'll try that.

[Q] Isiah Honeycomb Android freezes on HTC Logo

Hi Guys,
I hope you can help me on this one..
I am trying to install on SD Isaiah12345 CM7 Honeycomb ROM on this link:
http://forum.xda-developers.com/showthread.php?t=1069771
I copied the ROOTFS and Startup.txt from SD Folder to the honeycomb folder.
Click CLRCAD then HARET, it boots up but stock in green HTC LOGO.
I do have a previous Android folder which i am using however since the startup.txt is directed to honeycomb folder i think should be no issue.
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=honeycomb gps_zone=us nand_boot=0"
boot
please advise thanks..

you must copy the whole honeycomb folder to your sd. then you will not face any problem,i think

solved already thanks..

Berge, what was the fix?

[Q] Over-Clocking To 1.5GHz

Hi,
I have seen people over-clock their HD2 to 1.5GHz,
Is this at all safe to do?
If so can it be done on an SD build for example Boxmax Runnymead V6.5
I understand you need a certain kernal, which one?
Thanks,
Alex

Yes it's safe
Your phone will go onto that speed only if it's needed and afterwards slow down.
I don't know the sd kernels but if you use dorimanx kernel for nand Roms (will work on every nand rom) you will have that feature.
Press the thanks button
Sent from my HTC HD2 using xda premium

alex.odell.2011 said:
Hi,
I have seen people over-clock their HD2 to 1.5GHz,
Is this at all safe to do?
If so can it be done on an SD build for example Boxmax Runnymead V6.5
I understand you need a certain kernal, which one?
Thanks,
Alex
Click to expand...
Click to collapse
To over clock on an sd build you have to edit your startup.txt .
Sent from my GT-I9100 using Tapatalk

I have last dorimax kernel,i use it since 3.2 version.Now it s about 1 mounth that my hd2 cpu is clocked @ max 1612Mhz and min 96Mhz (possible from 3.8)
Great performance with zram enabled,the phone is ultra fast and is not hot.

elesbb said:
To over clock on an sd build you have to edit your startup.txt .
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
How do you do that?

alex.odell.2011 said:
How do you do that?
Click to expand...
Click to collapse
The startup.txt should be in the same folder as the other sd rom files you download when choosing a rom. Just open it with notepad and make your changes.

chrisrj28 said:
The startup.txt should be in the same folder as the other sd rom files you download when choosing a rom. Just open it with notepad and make your changes.
Click to expand...
Click to collapse
I have no reference to "cpu frequencys" what text would I have to put, and where to set the min value to 384MHz to 1.5GHz.
Thanks guys

Isn't it possible to change CPU Frequencies by using SetCPU or is it SDCard relatet?

alex.odell.2011 said:
I have no reference to "cpu frequencys" what text would I have to put, and where to set the min value to 384MHz to 1.5GHz.
Thanks guys
Click to expand...
Click to collapse
This is the command you MUST use to set the overclock kernel speeds.
This is just an example , the 614400 is the speed in Khz . so Mhz would be 614.4 but the code in the text file must be in khz. It must be entered in between the quotes after the "set cmdline"
Code:
acpuclock.oc_freq_khz=614400 for 614.4 MHz. Choose multiples of 19.2 MHz
here i have an example of a simple startup.txt file also with the location of the cpu clock speed preset.
Code:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path='Your path to android on SD' acpuclock.oc_freq_khz=614400"
boot
domimatik said:
Isn't it possible to change CPU Frequencies by using SetCPU or is it SDCard relatet?
Click to expand...
Click to collapse
SetCPU only "forces" which speeds to be used , the speeds must first be set by the kernel which is what the above command does in the startup.txt
Then you would use SetCPU to set the min and max frequencies of choice

elesbb said:
This is the command you MUST use to set the overclock kernel speeds.
This is just an example , the 614400 is the speed in Khz . so Mhz would be 614.4 but the code in the text file must be in khz. It must be entered in between the quotes after the "set cmdline"
Code:
acpuclock.oc_freq_khz=614400 for 614.4 MHz. Choose multiples of 19.2 MHz
here i have an example of a simple startup.txt file also with the location of the cpu clock speed preset.
Code:
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path='Your path to android on SD' acpuclock.oc_freq_khz=614400"
boot
SetCPU only "forces" which speeds to be used , the speeds must first be set by the kernel which is what the above command does in the startup.txt
Then you would use SetCPU to set the min and max frequencies of choice
Click to expand...
Click to collapse
Tried that but it didn't apply I did "1497600",
That just caused more lag?!?
Thanks

alex.odell.2011 said:
Tried that but it didn't apply I did "1497600",
That just caused more lag?!?
Thanks
Click to expand...
Click to collapse
did you then use SetCPU to set the Max clock speed ? and to set the proper governers ? and you have the code at the correct spot too right ? double and tripple check . also is it a multiple of 19.2 ?

elesbb said:
did you then use SetCPU to set the Max clock speed ? and to set the proper governers ? and you have the code at the correct spot too right ? double and tripple check . also is it a multiple of 19.2 ?
Click to expand...
Click to collapse
Ok I will reinstall android and try 1478400,
Alex

alex.odell.2011 said:
Ok I will reinstall android and try 1478400,
Alex
Click to expand...
Click to collapse
If you are doing everything correctly it should work without a problem . We will figure it out though

Hi guys tried it again,
No luck,
I am using Hasterin SenBT 8.6 (I think :S)
No luck, Maybe the kernal does not support OC,
Here is my "Startup.txt"
##BoxmaX S3.5 Runny v6.5##
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=Android data_size=1024 acpuclock.oc_freq_khz=1478400 nand_boot=0"
boot

alex.odell.2011 said:
Hi guys tried it again,
No luck,
I am using Hasterin SenBT 8.6 (I think :S)
No luck, Maybe the kernal does not support OC,
Here is my "Startup.txt"
##BoxmaX S3.5 Runny v6.5##
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=Android data_size=1024 acpuclock.oc_freq_khz=1478400 nand_boot=0"
boot
Click to expand...
Click to collapse
Can you link me to the ROM ? also are you able to boot at all ?

elesbb said:
Can you link me to the ROM ? also are you able to boot at all ?
Click to expand...
Click to collapse
Hi,
Yes it boots fine, running it now, great build I have 1.2GHz overclock as stock on build.
here you go...
http://forum.xda-developers.com/showthread.php?t=1256423

alex.odell.2011 said:
Hi,
Yes it boots fine, running it now, great build I have 1.2GHz overclock as stock on build.
here you go...
http://forum.xda-developers.com/showthread.php?t=1256423
Click to expand...
Click to collapse
Hmmm i see nothing about Overclocking on his thread , after you set the OC speed in your startup.txt can you still boot ? and check via SetCPU what the max cpu clock speed is at . it might be a simple format error .

elesbb said:
Hmmm i see nothing about Overclocking on his thread , after you set the OC speed in your startup.txt can you still boot ? and check via SetCPU what the max cpu clock speed is at . it might be a simple format error .
Click to expand...
Click to collapse
I have tried it again and it boots fine, when I go into SetCPU it just says the max speed is 1.2GHz ?!?!
Strange?

alex.odell.2011 said:
I have tried it again and it boots fine, when I go into SetCPU it just says the max speed is 1.2GHz ?!?!
Strange?
Click to expand...
Click to collapse
Hmm my only guess is the clock speed is hardwired into the kernel , id contact the dev of that ROM and ask him . It seems like OC is set by default

Sounds possible. Thanks for your help. 1.2GHz is still fast and safer I guess.
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium