Hello XDA community. I recently got a new phone from verizon (Galaxy S Fascinate) because their recent update screwed up my other phone (which was rooted) and now I need help getting this phone rooted. Ive seen some videos and they have links to different files in each one. So I was wondering if you the community can help me out here. The drivers I need to get my phone into download mode arent responding. Ive gone to Samsung's support page and they give me the driver, but the laptop isnt recognizing the device. Im sure I have the right one, but in case I dont can someone here lead me to the correct one?
They install fine, but the phone wont connect so I can access files and run it through odin. Below is my phones info. Im on the latest EH03 Software.
Hardware version: I500.04
Model Number: SCH-I500
Firmware Version: 2.3.5
Baseband Version: S:i500.04 V.EH03
2.6.35.7
SCH-I500.EH03
vrahn said:
Hello XDA community. I recently got a new phone from verizon (Galaxy S Fascinate) because their recent update screwed up my other phone (which was rooted) and now I need help getting this phone rooted. Ive seen some videos and they have links to different files in each one. So I was wondering if you the community can help me out here. The drivers I need to get my phone into download mode arent responding. Ive gone to Samsung's support page and they give me the driver, but the laptop isnt recognizing the device. Im sure I have the right one, but in case I dont can someone here lead me to the correct one?
They install fine, but the phone wont connect so I can access files and run it through odin. Below is my phones info. Im on the latest EH03 Software.
Hardware version: I500.04
Model Number: SCH-I500
Firmware Version: 2.3.5
Baseband Version: S:i500.04 V.EH03
2.6.35.7
SCH-I500.EH03
Click to expand...
Click to collapse
Try heimdall.
Sent from my SPH-D700 using Tapatalk
There's a guide about 1 post up in this forum with instructions and download links for everything you need.
Sent from my SCH-I500 using Tapatalk
I have the same fascy...... 1-
MAKE SURE THE USB CABLE is the correct one ( some WILL charge phone, but not work with usb debugging) 2- GO DIRECTLY TO DROIDSTYLES GUIDE, do not pass go, do not collect $200.
..its in GENERAL section. And IMO is THE guide for FASCINATE users.
Sent from my SCH-I500 using XDA App
icemanwbs said:
I have the same fascy...... 1-
MAKE SURE THE USB CABLE is the correct one ( some WILL charge phone, but not work with usb debugging) 2- GO DIRECTLY TO DROIDSTYLES GUIDE, do not pass go, do not collect $200.
..its in GENERAL section. And IMO is THE guide for FASCINATE users.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Links to these areas?
vrahn said:
Links to these areas?
Click to expand...
Click to collapse
Stickies! ! Search! !
Sent from my SCH-I500 using xda premium
vrahn said:
Links to these areas?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xwhofarted said:
Click to expand...
Click to collapse
Lmao.. This is the most epic response yet!
Sent from my SCH-I500 using xda premium
Its in the GENERAL SECTION....(GUIDE) DROIDSTYLE......
Sent from my SCH-I500 using XDA App
This post is epic. I used to ask those same questions but it sure is handy to search.
xwhofarted said:
Click to expand...
Click to collapse
ftw. 10char.
Truly, an epic post. I love it.
You gotta ask yourself if these same people should even be rooting their phones..
Sent from my Commodore 64..
READY.
load"xda forums",8,1
Hypnosis4U2NV said:
You gotta ask yourself if these same people should even be rooting their phones..
Click to expand...
Click to collapse
So True....
But i do hope that the OP got the answers he needed
Yeah I did. I found a guide by droidstyle and got it all situated ty
Sent from my SCH-I500 using XDA Premium App
Related
Hello all,
I am a noobie with a Motorola Atrix 4G MB860 AT&T USA Android 2.3.4 / 4.5.91 never before rooted/unlocked/[insert other adjective here] which, as you can guess by looking at the version numbers, I stupidly upgraded before realizing, "Oh hey, rooting this device might be a good idea."
Question is simple: Can I still root this device (and if so, under what conditions?), or do I have to wait?
It's been tough sifting through these forums, since most people already have rooted their device at some point or another and people who have never done so are, ahem, not very clear about their questions.
I haven’t tried particularly hard, but I have looked at SuperOneClick 2.1.1 (hung on "waiting for device"), moto-fastboot32 (tells me "unlock" is not supported, unsurprisingly), and I just downloaded the ATT-2.3.4_Pudding_preroot.rar although I'm not really sure what I'm supposed to do with it.
Cheers,
Edward
here you go..
http://briefmobile.com/motorola-atrix-4g-root
when you get to line 6 and enter this command..
/preinstall/dosu
it'll look like an error was made. Ignore it..keep typing the commands.
Website dated February 18th, 2011. 2.3.4 update was July. If there's one thing I hate more than out-of-date information, it's out-of-date information that might brick my phone.
http://forum.xda-developers.com/showthread.php?t=1138204
second post, the information still works. rooted my phone with it two days ago, works perfectly.
ezyang said:
Website dated February 18th, 2011. 2.3.4 update was July. If there's one thing I hate more than out-of-date information, it's out-of-date information that might brick my phone.
Click to expand...
Click to collapse
I just used this maybe...3 hours ago. so do whatever you want..
defnow said:
I just used this maybe...3 hours ago. so do whatever you want..
Click to expand...
Click to collapse
I also used this link the other night to root. Its easy enough and applies to the firmware that you're currently running.
Sent from my MB860 using XDA App
http://forum.xda-developers.com/showthread.php?t=1182871
This worked for me
ezyang said:
Website dated February 18th, 2011. 2.3.4 update was July. If there's one thing I hate more than out-of-date information, it's out-of-date information that might brick my phone.
Click to expand...
Click to collapse
Are you expecting a new root method every week? preinstall it's the best+ newest way to do it.
Sent from my MB860 using Tapatalk
b2bstarz said:
http://forum.xda-developers.com/showthread.php?t=1182871
This worked for me
Click to expand...
Click to collapse
Yeah if your lazy or scared to play the cmd prompt to utilize preinstall method on your own, use this. But preinstall is easy way to root.
Too many of these kind of threads going around....
Sent from my MB860 using XDA Premium App
I guess searching for "2.3.4 rooting" is just too hard.
ezyang said:
Website dated February 18th, 2011. 2.3.4 update was July. If there's one thing I hate more than out-of-date information, it's out-of-date information that might brick my phone.
Click to expand...
Click to collapse
Whoa cowboy. Got a problem with advice someone gives you. Then don't post and use the search like a normal person and getting others to do your work
Sent from my MB860 using XDA Premium App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHHHOOOOOAAAA!
joshyy_rey said:
Whoa cowboy. Got a problem with advice someone gives you. Then don't post and use the search like a normal person and getting others to do your work
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I've been using Gingerbreak on both of my Bell stock FWs with no issues.
Does Gingerbreak not work on AT&T Gingerbread?...
Sent from my MB860 using XDA Premium App
Nope. I had to use the method mentioned earlier in thread.
Edit: I should say it didn't work for me but there have been reports of it working for others.
Didn't AndroidCentral have an article up on rooting with a locked bootloader a few days ago?
From the Mighty Atrix 4G
Run the script from this thread. Works great..
http://forum.xda-developers.com/showthread.php?t=1182871
The only thing that bugs me more than newbs who can't be bothered to search are newbs who can't search, are told the answer and then assume the answer is wrong and they know more than the people trying to help them. Way to join the forum genius.
For the record, there are literally 50+ threads asking this very question since the OTA hit. I even put the answer in my signature once someone helped me out with it.
Sent from my MB860 using XDA App
Hey...Friends. im just rooted my atrix and installed cwm recovery..and i want to install a custom rom my present atrix running on Android 2.3.6 and Build Number is 4.5.141..can i install Alien Rom or any other roms please guide me through...thanks
How about you read your top sticky thread before you start a new thread on what's been covered... just a heads up
Sent from my MB860 using XDA
Before I suggest anything, is your bootloader unlocked?
Sent from my ATRIX using the Premium XDA App
L7iharsha said:
Hey...Friends. im just rooted my atrix and installed cwm recovery..and i want to install a custom rom my present atrix running on Android 2.3.6 and Build Number is 4.5.141..can i install Alien Rom or any other roms please guide me through...thanks
Click to expand...
Click to collapse
I would suggest trying out cyanogenmod 7 (link below) first to get used to flashing a new rom. The installation steps are quite straightforward and you will have lots of fun (!!) flashing all the roms on offer.
http://forum.xda-developers.com/showthread.php?t=1257574
GOOD LUCK!!
Yeah its all covered in the Noobs Guide
Sent from my MB860 using XDA
Voelker45 said:
Before I suggest anything, is your bootloader unlocked?
Sent from my ATRIX using the Premium XDA App
Click to expand...
Click to collapse
How can i know is my boot locked or unlocked?im really noob in atrix..
L7iharsha said:
How can i know is my boot locked or unlocked?im really noob in atrix..
Click to expand...
Click to collapse
Does it say unlocked in red in the top left hand corner of the boot screen when you turn the phone on?
Sent from my ATRIX using the Premium XDA App
No it doesn't..
L7iharsha said:
No it doesn't..
Click to expand...
Click to collapse
Then you aren't unlocked. You should probably read the Atrix stickies to get up to date on everything and read the links members put up for you in this thread. If you still have trouble, I will be glad to help.
Sent from my ATRIX using the Premium XDA App
yeah now trying to unlock the boot--if any i"ll post here...thanks...
Remember to be very carefull when unlocking the bootloader, and flashing a rom for the first time, it can brick your phone. Good luck!
I'am also and noob, but this is what I did to instal CM7 Rom. Don't forget to back up your stuff.
Go through the instruction on this thread
http://forum.xda-developers.com/showthread.php?t=1182871
Download from megaupload is not available, the alternate link is
http://www.mediafire.com/?x4m1ul78tzwsdmc
Follow the instruction.
After this download superuser from market and then root manager. Open root manager and select Flash ClockworkMod recovery, it will download CWM and CWM will be flashed. Open root manager again and select back up your current ROM, it will ask confirmation and then reboot and do its thing and again reboot. After that download the rom you want to flash and copy it to your internal SD card (don't unzip it, copy the zipped file). Go to the ROM manager and select Install rom from the SD card and select the rom you just copied. It will ask confirmation and then reboot and do its magic and you will have your ROM installed
Voelker45 said:
Does it say unlocked in red in the top left hand corner of the boot screen when you turn the phone on?
Sent from my ATRIX using the Premium XDA App
Click to expand...
Click to collapse
Is it suppose to be in red? Cause mine is in white
Sent from my SCH-I500 using XDA
popi09 said:
Is it suppose to be in red? Cause mine is in white
Sent from my SCH-I500 using XDA
Click to expand...
Click to collapse
The colour does not matter, mine is in white as well
：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：：rolleyes：
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which option do i need to select?
My Atrix Info
System Info 4.5.141.
Android Version
2.3.6
Looks as though that doesnt support ur version need to some searching on your version or u can end up with a brick real fast
Sent from my Kindle Fire using xda premium
use the unlock method in the pudding thread google atrix pudding --scroll down to the at&t unlock sbf
use rsd lite and "fastboot" to unlock the bootloader be sure you installed android sdk properly first on ya pc
Sent from my MB860 using Tapatalk
Did you root and unlock your phone, which ROM did you flash.
Sent from my MB860 using Tapatalk
Hello guys and girls, this is my 1st post here.
Bricked my phone yesterday and took me a whole night to discover this...
Just found out unbricking by odin 1.85 needs user to remove available driver installed in the pc to be replace with a new, to get a new com port .
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
Hello guys and girls, this is my 1st post here.
Bricked my phone yesterday and took me a whole night to discover this...
Just found out unbricking by odin 1.85 needs user to remove available driver installed in the pc to be replace with a new, to get a new com port .
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
OMG
Please spend few more night before doing anything.
fr3ker said:
Just found out unbricking by odin 1.85 needs user to remove available driver installed in the pc to be replace with a new, to get a new com port .
Click to expand...
Click to collapse
Entropy, all your investigation and hard work were for nothing. We've found a miracle cure here!:silly::victory:
You for real? Like srsly?
I went throughout a few posts and none that works, or maybe I just didnt fully understand em' ... so I tried to improvise and miracle just happen ...
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
Hello guys and girls, this is my 1st post here.
Bricked my phone yesterday and took me a whole night to discover this...
Just found out unbricking by odin 1.85 needs user to remove available driver installed in the pc to be replace with a new, to get a new com port .
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fr3ker said:
I went throughout a few posts and none that works, or maybe I just didnt fully understand em' ... so I tried to improvise and miracle just happen ...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You didn't have superbrick probably soft brick wich its hell easy to fix about drivers you probably didn't even have them installed.. The port in Pc has nothing to do with unbricking.... And read hell lot more before you really damage your device you just got lucky
Sent from my GT-N7000 using xda premium
Im curious, how did you brick it? So other people like you doesnt brick their devices..
I just accidentally flash a new custom rom over the currently unsuitable to flash with using CWM Recovery ..
He heh heh ..
I was really am lucky. Anyway can anyone share a link to the best way unbricking other than sending over to samsung??
Sent from my GT-N7000 using xda app-developers app
bricked is done ... Note gets bricked when you do a wipe over stock ICS Kernel ..
To my best knowledge we still do not have a way to recover your phone without sending it to Samsung Service Center...
fr3ker said:
I just accidentally flash a new custom rom over the currently unsuitable to flash with using CWM Recovery ..
He heh heh ..
I was really am lucky. Anyway can anyone share a link to the best way unbricking other than sending over to samsung??
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Troll
Sent from my GT-N7000 using xda premium
From the Moderator
TO the OP........... please read more and do the proper research before embarking on customizing your phone. No one here wants you to ruin your phone..
...But, neither do we want a posting where we are unable to help you.
.. DO YOUR HOMEWORK 1st......... then flash......
........THREAD CLOSED...........
~~ oka1
Hello everybody,
I'm starting this topic apologising for not being that good in modding Android devices.
I own a Samsung Galaxy S Advance GT-I9070 which runs Android 2.3.6.
Following many tutorials I managed to own root permissions and to load a different firmware on my device, which now is like this:
band version I9070XXLD3, kernel version [email protected] #2, build version GINGERBREAD.XXLD3.
I am very happy with my smartphone, it's very quick, all perfect.
I would like to update Android to a more recent version, possibly the last one.
What can I do?
On the official Android site, under the pèage Device Gallery, I couldn't find my model ;-(
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Excuse me?
I'm not getting it... is this a joke?
kingrsm said:
Hello everybody,
I'm starting this topic apologising for not being that good in modding Android devices.
I own a Samsung Galaxy S Advance GT-I9070 which runs Android 2.3.6.
Following many tutorials I managed to own root permissions and to load a different firmware on my device, which now is like this:
band version I9070XXLD3, kernel version [email protected] #2, build version GINGERBREAD.XXLD3.
I am very happy with my smartphone, it's very quick, all perfect.
I would like to update Android to a more recent version, possibly the last one.
What can I do?
On the official Android site, under the pèage Device Gallery, I couldn't find my model ;-(
Thank you
Click to expand...
Click to collapse
you can not even then updated for the moment we only have gingerbread, and an alpha version of cyanogen mod 7
Cut this out.. please closed this..
Please read first and do some research before asking...
Sent from my GT-I9070 using xda premium
Even the topic name is wrong..
Buddy, do you read at least 1 message or anything on this forum?
mrdoods said:
Cut this out.. please closed this..
Please read first and do some research before asking...
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
+1
..zapatalk..
kingrsm said:
Excuse me?
I'm not getting it... is this a joke?
Click to expand...
Click to collapse
There is no latest update for I9070 than the one you have now. No 4.1, and no 4.2 too.
shut_down said:
There is no latest update for I9070 than the one you have now. No 4.1, and no 4.2 too.
Click to expand...
Click to collapse
I understand.
Sorry for not posting the title in the correct way, meaning "[GT-I9070] - Updating from Gingerbread 2.3.6 to Jelly Bean 4.2". I tried to edit it, but couldn't.
So I guess there's no way to update & upgrade my device, even if it's owned by root permissions.
Thanks anyway.
Shaaan said:
View attachment 1481470
Click to expand...
Click to collapse
Let's get party started.
Good, sir!
Sent from my GT-I9070 using xda app-developers app
@Shaaan
Where you find such funny pics man?
I will report you if you don't reveal your sources ok? :silly:
Android is open source.
Seriously, where you find them?
varun.chitre15 said:
@Shaaan
Where you find such funny pics man?
I will report you if you don't reveal your sources ok? :silly:
Android is open source.
Seriously, where you find them?
Click to expand...
Click to collapse
Seessshhh..
What will you report? Me isn't breaking any rules.
Besides i make them on my own..
Shaaan said:
Seessshhh..
What will you report? Me isn't breaking any rules.
Besides i make them on my own..
Click to expand...
Click to collapse
What??? You make them on your own? The text right?
What about the characters? You are violating GPL ok? Lol
Comply with it and give me the websites or else...I will call Richard Stallman here.
varun.chitre15 said:
What??? You make them on your own? The text right?
What about the characters? You are violating GPL ok? Lol
Comply with it and give me the websites or else...I will call Richard Stallman here.
Click to expand...
Click to collapse
Yea. Tell me about GPL..
Lol
Sent from my GT-I9070 using xda premium
That scared me guys!!
I thinked samsung was released JB in our devices!!
LoL close the thread
Enviado desde mi GT-I9100P usando Tapatalk 2
For 1 second i thought we got jb update for our device..
Sent from my GT-I9070 using xda app-developers app
nafitte said:
For 1 second i thought we got jb update for our device..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I think this thread should be closed. And title canged. Everyone could think that JB is released... At least add "?" at the end.
Continue here please: http://forum.xda-developers.com/showthread.php?t=1983520
[Q&A] Hyperdrive Rom Note 3 Verizon ║ Non-Development Discussion ║ Support
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM
Please feel free to share issues, questions and offer help
Please read the FAQ in the Rom Thread
Respect all users especially those attempting to offer assistance.
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
_______________________________________________
Please keep discussion focused, on the topic described in the OP
_______________________________________________
Reserved
Reserved..
Running perfectly here. Flashed this morning. Missed hyperdrive, had it on my s4. Can't wait for the rest of the spped and features! Keep it up
Sent from my SM-N900V using xda app-developers app
This will not boot on the dev edition. Just takes you to odin and says it cant boot
Sent from my Verizon Galaxy Note 3 Developer Edition
As with my s3; You have my thanks for good work
Sent from my SM-N900V using XDA Premium 4 mobile app
keynith said:
This will not boot on the dev edition. Just takes you to odin and says it cant boot
Sent from my Verizon Galaxy Note 3 Developer Edition
Click to expand...
Click to collapse
Shoulda got the retail version.
Sent from my SM-N900V using Tapatalk
kisypher said:
Shoulda got the retail version.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
haha um no
oneandroidnut said:
haha um no
Click to expand...
Click to collapse
Theres a fix in the thread and it works fine now v
sbreen94 said:
Theres a fix in the thread and it works fine now v
Click to expand...
Click to collapse
got it now thanks!
Just want to say, great first ROM, I'm about to backup to stock slot for the first time ever, I'm a bit nervous.
Sent from my SM-N900V using xda app-developers app
I rooted with de la Vega..installed ss..booted into this Rom.
I'm seeing Baseband as MI9 but build as MJ7..did I miss something? I was expecting this to update as well
useruser111 said:
I rooted with de la Vega..installed ss..booted into this Rom.
I'm seeing Baseband as MI9 but build as MJ7..did I miss something? I was expecting this to update as well
Click to expand...
Click to collapse
No the rom never updates your baseband so youll need to install that yourself!
Any clue as to why it went back to stock ROM after a reboot? Did I do something wrong or miss something?
popi09 said:
Any clue as to why it went back to stock ROM after a reboot? Did I do something wrong or miss something?
Click to expand...
Click to collapse
Is your charger plugged in? Did the same thing for me and I unplugged and restarted again and it booted to the correct ROM slot.
Thank you
First off, thank you for making one thread to contain all the questions, second, thank you for the awesome rom. I have it installed with almost no problems. I have hangouts with sms and it will crash when switching conversations sometimes, not consistently though so I haven't submitted a bug report. Right now it works great.
+1
christianpeso said:
Is your charger plugged in? Did the same thing for me and I unplugged and restarted again and it booted to the correct ROM slot.
Click to expand...
Click to collapse
Sent from my SM-N900V using Tapatalk
I am having trouble with Wanam. It shows that it's installed but I can't open it and can't uninstall it either. X posed works fine. I'm sure I'm doing something wrong.
Yep... I am an idiot.. Figured it out..
Sent from my SM-N900V using xda app-developers app
popi09 said:
Any clue as to why it went back to stock ROM after a reboot? Did I do something wrong or miss something?
Click to expand...
Click to collapse
No it wasn't plugged in.
popi09 said:
No it wasn't plugged in.
Click to expand...
Click to collapse
Try clearing the delvik cache and cache that fixed all my problems.