Related
Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.
did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
I backed up the stock firmware I already had manually, before it prompted on the flash.
did you do a full wipe before flashing the rom?
No i didn't, thought it would be safer incase something went wrong?
run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...
Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.
Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?
you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.
Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?
go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card
Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.
Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that
Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????
sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.
I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...
I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.
K so I have searched the net for days about this, with no success. what I want to know is it possible to transfer a backup of a stock rom, from one tablet to another of the same kind for recovery? if so can you post instructions or a tut, I've lost my original due to currupt data. and I want my Dolby digital sound back.
acer iconia minimalist rom
edit: I do have access to another tablet running stock.
thundercub88 said:
K so I have searched the net for days about this, with no success. what I want to know is it possible to transfer a backup of a stock rom, from one tablet to another of the same kind for recovery? if so can you post instructions or a tut, I've lost my original due to currupt data. and I want my Dolby digital sound back.
acer iconia minimalist rom
edit: I do have access to another tablet running stock.
Click to expand...
Click to collapse
Using cwm do a full nandroid backup, transfer the backup to microsd, put the microsd into the other Iconia and use cwm to do a nandroid restore.
At least, that's my guess.
well that's a start, I was about to start ripping my hair out over this simple sound issue lol but thanks.
thundercub88 said:
well that's a start, I was about to start ripping my hair out over this simple sound issue lol but thanks.
Click to expand...
Click to collapse
Hmmmmm. Can't you use use a full update.zip and flash a copy of the stock rom? Never tried using a nandroid backup on a system it was not created on - it might work, but it might not, I really am not sure.
But just flashing a full update.zip or installing Acer recovery tool to flash a stock rom sounds easier and more likely to work to me - am I missing something and is this not an option?
I tried flashing two or three times before, sent it into a bootloop, I even tried the Acer update decrypter but my laptop is 32 bit, and until today when I finally decided to post the question is when it occurred to me about possibly transferring it. btw, is there a set destination for the nandroid back up?
thundercub88 said:
I tried flashing two or three times before, sent it into a bootloop, I even tried the Acer update decrypter but my laptop is 32 bit, and until today when I finally decided to post the question is when it occurred to me about possibly transferring it. btw, is there a set destination for the nandroid back up?
Click to expand...
Click to collapse
Nandroid backups go to the external SD by default (I think) - have you tried using Acer Recovery Installer on the tab with the issue? Assuming you can still boot it and have root you may be able to go back to stock using it.
acer recovery
Tonto the market. Download the new version of Acer recovery installer.install third recovery. Go back into Acer recovery got last box .choose a rom for your location.let it download then install.point and click simple and will fix your issue.if you have failed attempts. You might want to try a different SD card.good luck
This did work for me
.
Erica Renee
Urban geeky blonde like me can do it surely a strong man like yourself willnfigure it out. Giggles
I have tried Acer recovery installer as well, I have 2.3 in fact I tried just a moment ago, and I get boot screen with android the triangle and the exlimation point.
confusion
OK Acer recovery installer is not the recovery just a means to install and work within it and run pre defined scripts.as in there backup and so on
If you are getting that.you need to
1.open Acer recovery installer
2.Install Recovery.the first black box acroos screen.it will askbifnyoubwant to back up stock recoverybdo so.(this is the recovery program only not the system) .
3.boot into recovery and backup your whole tablet.or use the far right black button to d/load and install a new rom from his list.fallow the instructions there clickishly simple
Good luck
So what Acer recovery installer does is replace the stock recovery. To allow you to install non stock decryptedand other. Zip files of course it will install stock recoveries as well.read the Acer recovery install thread under Dev section it's al in there
Again Google luck
OK so here is what I did and it worked like a charm, installed cwm did a custom restore (everything but data) mounted the SD card on other tablet restored and voila I have Dolby mobile back! thank you guys for all the help and info, now I can truly mess with roms and be safe knowing I have a non currupt back up
thundercub88 said:
OK so here is what I did and it worked like a charm, installed cwm did a custom restore (everything but data) mounted the SD card on other tablet restored and voila I have Dolby mobile back! thank you guys for all the help and info, now I can truly mess with roms and be safe knowing I have a non currupt back up
Click to expand...
Click to collapse
SWEET! Glad you got it figured out!
folks, my a500 is overheating .. is getting too hot near the Dock Connector ...
is without overclocking, began in the ROM v10 ... already installed a four roms and the error still continues,
currently with honeyvillian, I leave with the original stock which is 3.0.1
I try the same way as was done to use mod 3.2, and does not work
... only shows the current version
well ..
current version: 1.0.1 Honey Villian ...
New Verson: N / A
I want to install the original version to send assistance to repair the high temperature
Verdeee said:
folks, my a500 is overheating .. is getting too hot near the Dock Connector ...
is without overclocking, began in the ROM v10 ... already installed a four roms and the error still continues,
currently with honeyvillian, I leave with the original stock which is 3.0.1
I try the same way as was done to use mod 3.2, and does not work
... only shows the current version
well ..
current version: 1.0.1 Honey Villian ...
New Verson: N / A
I want to install the original version to send assistance to repair the high temperature
Click to expand...
Click to collapse
You're not flashing your Rom correctly. I told you this in Thor's forum (at least the exact post was there also, so I suspect it's you, if it's not you, then accept my apologies ).
The reason it keeps telling you that a certain Rom/kernel is installed, is because it seems like you're just flashing one over the top of another without cleaning anything out. This is why your cpu overheats. You've got a corrupted OS.
Also, a Kernel image is not a Rom. And there are 2 types of kernels. 1 for a stock rom, and 1 for a cooked rom. You shouldn't mix the 2 or you may get problems depending on the rom. Another reason why your cpu overheats.
Do this. Put your SD in your PC's card reader, and format it to Fat32. Reason, is that I have absolutely no idea what you have on your sd. Update.zips, Kernels, Roms, etc.
Copy your VillainRom or Revolver Rom or Taboonay Rom (or whatever rom you want to use) to your SD, then put it back in your 500.
When you flash a new rom, you boot to CWM.
Wipe User Data
Wipe Cache Partition
Goto Advanced and Wipe Delvik
I like to do each a couple of times, just to be sure.
Then go back to the previous menu, and select "Install zip from sd"
Choose your rom and install it.
All three of the above roms come with a cooked kernel so you shouldn't have to mess with kernels.
Also, if you wish to install a different cooked kernel, you only need to wipe Delvik before installing.
Also, Install the rom first and let it run for awhile before installing a kernel. Never do both at the same time.
And the final rule, if you used a backup program like Titanium Backup or any of the others, Never Ever backup and restore system files to a different rom.
But, if you want to put it back to stock, the I suppose you can use the acer recovery tool to flash a stock acer rom and flash the stock recovery image. For more info, see this thread;
http://forum.xda-developers.com/showthread.php?t=1155664
Follow Steps at own Risk
MIUI or CM7 Installation:
1.) Depending on what you want to install, download either the I9000 Miui 1.11.11 Rom or the CM 7.1 Stable Rom.
2.) Download the Glitch-V13-DEV-TelusFascinate+ kernel. I chose the Medium Leakage Kernel.
3.) Move both ZIP (ROM and Kernel) files over to the Root of your Internal SD Card (USB, Bluetooth, etc)
4.) Make sure you DISABLE all Lagfixs if you have it enabled.
IMPORTANT:
Froyo 2.2.x (Not Tested):
We need to be able to boot into CWM. Easiest way to do this if you are on Froyo is to Flash the SpeedMod kernel or the Voodoo Kernel. I suggest following all steps which includes installing Darky 9.2 just to be sure. I haven't tried flashing Miui or CM7 from right from the SpeedMod CWM.
Gingerbread 2.3.x (Tested):
If you running a custom ROM that is based off Gingerbread you will be required to flash the Darky Resurrection Edition 9.2 (Froyo) via Odin. This is to insure that the proper boot loaders updated before installing MIUI or CM7. Download the Darky 9.2 package from the above URL, the ONLY files that we need from here are: Odin3 v1.3.exe, darky_odin.tar.md5 & s1_odin_20100512.pit​
Follow Ficeto's Instructions below to flash Darky 9.2 and remember to backup all your stuff before starting.
-------------------------------------
5.) Next step is to get your phone into Download Mode. If you are unsure please search the forums here.
6.) Now, open ODIN and connect the phone to the computer. ODIN will say 'Added'.
7.) Tick the 'Repartition' option, and then select the following files in ODIN (from the folder you extracted the base package in):
[*]PDA: darky_odin.tar.md5
[*]PIT: s1_odin_20100512.pit
8.) Press the Start button and wait for it to finish. Once it finishes, disconnect the phone from the computer after the phone reboots.
9.) After ODIN completes procedure and the phone reboots, a screen will come on the phone with 'Android system recovery <2e>' written at the top, and the following text will be written at the bottom:
"E:Invalid command argument
--Install from package--
Finding update package...
Opening update package...
Installing update...
#MANUAL MODE#
-- Appling Muti CSC...
Installing Muti CSC"
Don't worry about this.
10.) From here the next step is to reboot your phone, your POWER / SELECT button will not work so you will have to pull the battery out. Once you put the battery back in and start up the phone, it should automatically boot into CWM Recovery.
-------------------------------------
11.) Next we want to do a COMPLETE WIPE (Factory), also deleting Partition Cache and the Delvik Cache.
12.) Once the phone has been cleansed, you want to make your way to the option "Select ZIP from SD Card" and select the ROM zip file located on the SD Card. Start the Installation.
NOTE: Once you start the installation, your phone will reboot part way through, then will continue the rest of the installation. The total time for this installation could take up to 10 minutes, so please be patient and do not touch the phone!
13.) DONE!! You have now successfully Flashed either Miui or CM7 on your Fascinate!.
14.) Actually, one more Step which I have ONLY tested with Miui 1.11.11:
Once you have checked a few things out, we are going to want to Flash the Glitch-V13-DEV-TelusFascinate+ kernel. So boot back into CWM Recovery and Flash it the same way you flashed the ROM.
Optional:
BASEBAND UPDATE:
I would also suggest Flashing the I9000UGJK3 Baseband or another of your liking because I had crappy cell signal with the Stock Miui Baseband. Just download it as you normally would, move the ZIP to the internal SD Card, boot into CMW recovery and flash it. Click on the Link Here and find the modem that you would like to flash.
4WAYREBOOT MOD:
I think this Mod is a MUST for anyone running Miui, it completes it!! It basically adds the additional reboot options like Recovery, Hotboot, etc. to the 'reboot' list when going to reboot the phone. Install the ZIP the same way as usual, through CWM recovery. Download the 4-Way Reboot Mod Here.
ENJOY!!!!
I will add to this post with some additional and helpful information.
Other helpful information:
- With Miui or CM7, you will want to install the ROM Manager Application. It contains a bunch of additional downloads and is a must when using Miui or CM7.
- Please do NOT USE 'ROM manager' Backup option to create a nandroid. To create a backup, boot into CWM recovery normally via ROM manager or if you have the 4-Way Reboot mod installed. Just don't use the 'Backup option' in ROM Manager
- I haven't tried Launcher Pro yet, I've actually stuck with the Stock Launcher that Miui comes with, Launcher2.apk
thanks so much! save me tinkering time
Thanks! On my to do!
EDIT - thinking about this on the way into work. Should we include a step (if the complete wipe doesn't do it) to wipe the battery stats? Could be done in CWM after flashing the ROM, or through an app like battery calibration on boot up. Also, we should note on the coming from froyo that you only need speed kernel if you do not have an option to get CWM. When I ran froyo I had a voodoo kernel so could get to CWM that way.
Also, is miui EXT4 out of the box (no need for a lagfix)? Given its next to latest GB I'm assuming it is
Just some thoughts - hoping to do this tonight, but one quick question for the group - flashing - so do you all make sure you have a full battery before you flash? I've not always done that in the past, but believe its a best practice.
NEW EDIT - almost forgot, great work as always Adam!
jpmccarthy said:
Thanks! On my to do!
EDIT - thinking about this on the way into work. Should we include a step (if the complete wipe doesn't do it) to wipe the battery stats? Could be done in CWM after flashing the ROM, or through an app like battery calibration on boot up. Also, we should note on the coming from froyo that you only need speed kernel if you do not have an option to get CWM. When I ran froyo I had a voodoo kernel so could get to CWM that way.
Click to expand...
Click to collapse
Thanks Jeff, the Voodoo kernel should also work as well. In regards to wiping the battery, I never did but it might be a good idea just in case. I haven't run into any issues as of yet. (knock on wood)
jpmccarthy said:
Also, is miui EXT4 out of the box (no need for a lagfix)? Given its next to latest GB I'm assuming it is
Click to expand...
Click to collapse
Not 100% sure on this at the moment, but I do know that there is no need for Lagfix with Miui or CM7.
jpmccarthy said:
Just some thoughts - hoping to do this tonight, but one quick question for the group - flashing - so do you all make sure you have a full battery before you flash? I've not always done that in the past, but believe its a best practice.
Click to expand...
Click to collapse
It definitely is good practice to Flash a new ROM when the battery is almost 100% full. Now saying that, I have flashed ROMS when my battery has been as low as 40% - 45% and never had any issues.
I think that's the best comment Adam - why apply a lagfix if one is not needed!
Cannot wait to give this a run - hoping tonight assuming my little ones all go to bed, and my wife does not get too annoyed with me
[MIUI Themes and Lock Screens]
The Miui Rom is very customizable when it comes to themes and lock screens.
The Miui 'Themes' application allows you to download, install, customize and apply all different types of themes. Which I would have to say that there are at least a good 100 + or more themes out there at the moment.
I think the best feature that the 'Themes' app has to offer is that you have the option to apply different theme components to the current base theme that you have it set to!
As an example, I currently have one of the 'Honeycomb' themes applied as my base theme, my Lockscreen is based off the 'Slide Slip' theme, my Icon Set is based off the 'Seemless Dark Blue' theme and my Dialer is also based off the 'Seemless Dark Blue' theme. It feels like the possibilities are endless now when it comes to customization.
To see the different components the way the themes are broken down, choose 'Edit Theme' from within the 'Themes' app. Within here you can then assign other theme components as long as you with have the full theme installed or just that one component.
Installation of .mtz files, (Full Themes / Theme components)
Once you have downloaded a compatible Miui theme (.mtz format), copy that file to the following directory on your phone:
/sdcard/MIUI/theme
(You can also import themes from the themes application itself, all that does it move it to that directory for you)
Then open up the 'Themes' app and your new theme will be in the list.
NOTE:
If its a theme component only (Still .mtz format) , eg. Lock Screen component, it WILL NOT show up in your main Theme list. Just click on 'Edit Theme' and it should show up under the drop down for 'Lockscreen Style'. Get what i mean?
For Miui Lockscreens, check out the link below!
http://forum.xda-developers.com/showthread.php?t=1288096
For full Miui themes, check out the link below:
http://forum.xda-developers.com/showthread.php?t=1249352
Also, the Theme app has an Online library that you can search through as well
Cheers!
<drool> awesomeness <\drool>
EDIT flashing in process - factory reset at the moment
Awesome! Thanks for creating this. Just gotta wait until the weekend to take the plunge. It's not the flashing taking too long that I worry about, but the time I spend restoring apps and settings and just playing around in general. Not to mention having time to start over if I feel something went wrong. Two more days to go!
guessing it shouldn't boot loop - I'm stuck in a boot loop
looks like it cannot find the SD card - so keep restarting looking for the miui zip - the CWM error is quick before it restarts (can't see it)
EDIT : re-downloaded the zip but same effect. Anyone hit this before with cm7 or miui? trying a few things before I attempt a restore.
I get to 'checking bml' before it reboots, and then it boot loops continuously - I tried flashing and not flashing the glitch kernel first, but nothing sticks.
EDIT : giving up, attempting a restore of my nandroid I made before I started. Any tips let me know - disappointed.
EDIT : still up, backup didn't go so well - likely cause I have odd kernels - one last ditch - went right back to froyo stock, tried speedmod (bootloop), now put on 9.2, rebooting - may give it one more shot before giving up for the night.
EDIT - SON OF A ***** - that did it!!!!!!!!!!!!!!! I might have to provide some troubleshooting tips on that one!!!!!!!!
EDIT AGAIN - knock on wood here - I'm farther than the bootloop and I'm at a MIUI splash screen - that might be as far as I go tonight ... LOL
FINAL EDIT - so not much playing tonight. Ate into that with all this trouble shooting.
SO IF YOU ARE COMING FROM A GB ROM AND GET STUCK IN A BOOTLOOP - I would go to STOCK FROYO and then flash 9.2 and then follow the instructions. Bang on job Adam! I think I just had something odd on my phone.
I'm now up - gltich on + miui.
Wow, sorry you had such a hard time man. Only time I hit a hard bootloop was when trying to install CM7 using gingerbread bootloaders. Did you eventually get it going??
Sent from my Telus T959D
iwebsource said:
Wow, sorry you had such a hard time man. Only time I hit a hard bootloop was when trying to install CM7 using gingerbread bootloaders. Did you eventually get it going??
Sent from my Telus T959D
Click to expand...
Click to collapse
yeah, see my last edits - putting on 9.2 I'm guessing didn't completely adjust the bootloaders - when I put on stock telus 2.1, THEN 9.2 - I was golden.
Didn't play much (that was after 12) but restored a few apps - but man, it is really fast. Will report some thoughts over the weekend likely.
Questions on MIUI
OK a few questions.
- downloaded google maps (navigation, etc). Start it up, but it fails miserably - bombs out and goes into a constant vibration. ANyone having similar issues with that? Suggestions?
- There's a 6 digit number in the left corner of my screen - no meaning to me - anyone know what that is or seeing something similar?
- also, pinch and zoom with the camera. Those don't seem to work - any issues you folks having with that?
- Adam you suggest a different base band - where are you getting zip - I'm only finding large tars on that link (but I"m over tired)
- The OTA updater looks great BUT is in chinese - any one have a work around for that?
Again, sorry about all the issues you had with installing and such. My very first time
jpmccarthy said:
OK a few questions.
- downloaded google maps (navigation, etc). Start it up, but it fails miserably - bombs out and goes into a constant vibration. ANyone having similar issues with that? Suggestions?
Click to expand...
Click to collapse
Weird man, I actually installed google maps a few days ago. First time I used it (Navigation) was yesterday to test out the GPS. Had no problems at all with the apps yet.
jpmccarthy said:
- There's a 6 digit number in the left corner of my screen - no meaning to me - anyone know what that is or seeing something similar?
Click to expand...
Click to collapse
That is your Service Provider. With CM7 and Miui, I noticed it doesn't resolve the provider. Its no harm unless you don't like looking at numbers there. I did find a work around though, just install the Miui Extended Menu Mod and you can change it to what ever you want:
http://forums.miuiandroid.com/showthread.php?7738-MOD-Extended-Settings-Menu-Options
jpmccarthy said:
- also, pinch and zoom with the camera. Those don't seem to work - any issues you folks having with that?
Click to expand...
Click to collapse
Pinch and Zoom? Unsure what you mean, is that just the touch-point focus? If not I haven't tested that yet.
jpmccarthy said:
- Adam you suggest a different base band - where are you getting zip - I'm only finding large tars on that link (but I"m over tired)
Click to expand...
Click to collapse
Guess I better check my links more better. Stupid site.
For now use this one. I know your in the same geo area as me, I haven't had any issues with this one, use the one attached.
Oh, don't use the OTA updater, just use ROM Manager. Or download the Miui updater app from the market.
I'm guessing MIUI originally was developed in China, lol
iwebsource said:
Oh, don't use the OTA updater, just use ROM Manager. Or download the Miui updater app from the market.
I'm guessing MIUI originally was developed in China, lol
Click to expand...
Click to collapse
OK - maybe I should reflash. I actually have ROM Mgr premium - but its telling me I need CWM installed to work (which I obviously have).
And no apologies needed - we're all guinea pigs here
EDIT - Also, on the camera - used to be able to pinch like a website on Darky's to zoom in and out. Maybe that was a custom camera but I think it was generally samsung stock.
EDIT - Reflashed (1.11.18 actually - am I the first ) and GPS issue solved - might have been tied to the modem as I flashed yours Adam (THANK YOU!!!!!!) Keeping moving forward
jpmccarthy said:
OK - maybe I should reflash. I actually have ROM Mgr premium - but its telling me I need CWM installed to work (which I obviously have).
And no apologies needed - we're all guinea pigs here
EDIT - Also, on the camera - used to be able to pinch like a website on Darky's to zoom in and out. Maybe that was a custom camera but I think it was generally samsung stock.
Click to expand...
Click to collapse
Might be the best thing to do. I've read that some people prefer to >> Flash the ROM first >> Flash Kernel >> Boot into Kernel CWM >> Re-Flash ROM again.
Yeah, if you do there is no need for the Darky steps anymore.
Just boot into CWM, do factory wipe, partition and dalvik cache, fix permissions, then flash miui again.
Oh, in regards to ROM Manager and CWM, just select 'Flash ClockWorkMod Recovery' >> Select I9000 (MTA) and choose version 3.
Then reboot into recovery to test.
It actually still uses the Glitch CWM from the Kernel. This is just so that ROM Manager will recognize that you have a selected CWM
Looks like Miui 1.11.18 is now out. I'm going to Flash and test it out shortly.
iwebsource said:
Looks like Miui 1.11.18 is now out. I'm going to Flash and test it out shortly.
Click to expand...
Click to collapse
Already on it - best you for the FIRST time!
jpmccarthy said:
Already on it - best you for the FIRST time!
Click to expand...
Click to collapse
I'm loving Miui and the glitch kernel man. There are a few other Kernels out there that we can try as well. I maybe testing the platypus kernel out soon, it is also built for our phone too
From what I've read so far though, Glitch is one of the best so far.
iwebsource said:
I'm loving Miui and the glitch kernel man. There are a few other Kernels out there that we can try as well. I maybe testing the platypus kernel out soon, it is also built for our phone too
From what I've read so far though, Glitch is one of the best so far.
Click to expand...
Click to collapse
when you get 1.11.18, go to ROM manager and select update ROM - does nothing happen? I have it registered now with a CWM which is fine, it shows my current version (which is latest) so when I click check for udpates nothing happens (no - 'no update available' or anything like that). Just wanted to see if it was working correctly.
Can someone please explain to me how to go from Bionix 1.3.1 to ICS? I have read a lot (perhaps too much) about GB bootloaders, etc. but am not sure what is required.
Do I need to have a GB ROM installed before going to ICS?
I have also seen guides for going from 2.1 to ICS, but that is not my situation.
I guess my main area of ignorance is that I have never flashed any bootloader of any kind.
If I go to ICS and want to restore my Froyo backup do I need to flash a bootloader before I do that?
Obviously I'm confused about the whole process.
Thanks for any clarification you can give me.
See my guide to go from 2.1 to ICS and one if the top lines tells you how to go from Froyo to ICS.
GB bootloaders are no longer needed but suggested. Probably the only scary part of the whole process, but it is actually the easiest.
CM7 needed before ICS or not?
From a post in the same thread as your guide:
"
If you want a stable 2.2 try Toxic8 (I run this with Gingerbread theme as my "home" ROM when I am not testing), Deranged9, Bionix (no longer supported) and Bionix Fishman's version (this is supported), Bi-winning. All you have to do to flash these is follow the instructions above and when it comes time to flashCM7, skip it and flash the ROM of your choice."
Does this mean that if I have Bionix already that I don't need to go to CM7 before ICS?
There are a couple of ICS Roms where you can come from froyo. You have to probably flash it twice to get into the specific cwm.
To get back to you bionix, you have to use Odin to get back to stock.
rblancrt said:
From a post in the same thread as your guide:
"
If you want a stable 2.2 try Toxic8 (I run this with Gingerbread theme as my "home" ROM when I am not testing), Deranged9, Bionix (no longer supported) and Bionix Fishman's version (this is supported), Bi-winning. All you have to do to flash these is follow the instructions above and when it comes time to flashCM7, skip it and flash the ROM of your choice."
Does this mean that if I have Bionix already that I don't need to go to CM7 before ICS?
Click to expand...
Click to collapse
This is from a different thread in a different context. Someone was asking how to flash a custom ROM, IIRC.
If you want ICS, you have to flash CM7 first, let it bootloop, pull the battery, reflash and then once it settles, flash ICS.
Also, don't apologize for being detailed or thinking that you are reading into too much, Wished more were like this.
From the Guide
This is for a clean install. You can also install straight from Froyo. Just start at the CM7 part below and skip the Odin portion.
Click to expand...
Click to collapse
so any luck with getting to ICS from bionix 1.3.1...cause im still in the same spot...and im very wary as to what to do as well...so if any luck...please let me what you did...
I just did it
If you follow the instructions in the Passion ICS thread it's pretty straightforward. I had never used Odin before even though I had flashed Bionix almost a year ago. I'm not a phone guru, just somebody who likes to mess with these custom ROMs.
These steps are high level, you can find specific links in numerous places.
Here's what I did:
- Download Odin
- Download the required files to flash the phone back to stock 2.1 (.pit file and .tar file)
- Backup apps with Titanium (don't bother backing up the system it's different in newer versions anyway and all you'll have is trouble if you try to restore system settings)
- Backup anything else you feel is important on your internal and external SD cards
- Use Odin to flash the phone back to stock
- Root the phone (using the update.zip technique)
- Install clockwork recovery (I found an update.zip for this too)
- Flash the Cyanogenmod version of ICS (no longer under development but you need it for the boot loaders). You will likely encounter a boot loop in this process. Don't panic, just pull the battery once it loops a few times. Boot back into recovery and flash again.
- From this point you can now flash ICS using clockwork, following this you can restore your apps with Titanium if desired
ICS totally rocks by the way. I've been using Passion v13 RC1 for a week now. Tried the newest one Euphoria but it didn't work out for me.
I have to admit that I never tried ICS. I have been using an ICS theme for a long time so my phone looks like it has ICS on it. I was also leary of the mute/unmute problem I had read about and wasn't sure about how well good GPS was.
I've been testing out the ICS that is to become CM9 with the latest build being 16 found at http://forum.xda-developers.com/showthread.php?t=1503038
It's really stable... granted not everything is implemented such as a number of the settings screens. But I was on CM7 when I installed it so I was able to just flash it direct.
atatistcheff said:
If you follow the instructions in the Passion ICS thread it's pretty straightforward. I had never used Odin before even though I had flashed Bionix almost a year ago. I'm not a phone guru, just somebody who likes to mess with these custom ROMs.
These steps are high level, you can find specific links in numerous places.
Here's what I did:
- Download Odin
- Download the required files to flash the phone back to stock 2.1 (.pit file and .tar file)
- Backup apps with Titanium (don't bother backing up the system it's different in newer versions anyway and all you'll have is trouble if you try to restore system settings)
- Backup anything else you feel is important on your internal and external SD cards
- Use Odin to flash the phone back to stock
- Root the phone (using the update.zip technique)
- Install clockwork recovery (I found an update.zip for this too)
- Flash the Cyanogenmod version of ICS (no longer under development but you need it for the boot loaders). You will likely encounter a boot loop in this process. Don't panic, just pull the battery once it loops a few times. Boot back into recovery and flash again.
- From this point you can now flash ICS using clockwork, following this you can restore your apps with Titanium if desired
ICS totally rocks by the way. I've been using Passion v13 RC1 for a week now. Tried the newest one Euphoria but it didn't work out for me.
Click to expand...
Click to collapse
This method works great! I used this last week and had some trouble with boot loops. But nothing that can't be fix with removing the battery. I suggest finding the youtube video that is on the ICS Passion thread. The person does it on real time, so you can follow along as you do it.
I love ICS passion. It is as smooth or even smoother than Bionix.
mikesdot said:
so any luck with getting to ICS from bionix 1.3.1...cause im still in the same spot...and im very wary as to what to do as well...so if any luck...please let me what you did...
Click to expand...
Click to collapse
Just follow instructions in OP of attached link and your good.
-Download ICZen and place it on your internal sd
-Reboot to Clockwork Recovery
-Perform a wipedata/factory reset
-Go to mounts and storage and format the system partition
-Flash your downloaded ICZ rom file
-From the main menu of recovery, perform a wipedata/factory reset again
-Reboot
-On bootup, give it a few minutes to settle in, reboot and use as normal.
-Enjoy your ICZen!
http://forum.xda-developers.com/showthread.php?t=1499455
No need to have GB boots and if you want to go back,odin to stock to reflash Bionix and then your nandroid.
This is a great ICS rom and I'm a huge Bionix fan,with a 1.3.1 and 1.3.1 Fishman final nandroid backup.
I flashed Passion ICS rc13 on 2 Vibrants, one from Bionix 1.3.1 and another from trigger 2.2 and skipped some steps (like GB bootloader) and they are working just fine.
My steps:
1. Wipe data/factory reset
2. Flash CM GB.
3. Wipe data/factory reset
4. Flash Neobuddy ICS
5. Flash kernel.
6. Let the phone boot, sign up and do its setup.
All in all, took maybe 30 minutes first phone and 20 min second phone once I got more comfortable.
bionix 1.31 striaight to CM7 then on to ICS?
Do you have to go back to stock? Why couldn't you just flash to CM7 then go on to ICS? I am on Bionix 1.31 and this process just seems easier.
rblancrt said:
I have to admit that I never tried ICS. I have been using an ICS theme for a long time so my phone looks like it has ICS on it. I was also leary of the mute/unmute problem I had read about and wasn't sure about how well good GPS was.
Click to expand...
Click to collapse
I think mute/unmute is hit or miss. But if you are worried about or need GPS, dont flash an ICS rom.
Also, when upgrading fro 2.2 -> 4.0, take out your external sd card prior to that! It might cause a bootloop when flashing the initial CM7 rom. I happened to me and also other people on youtube (where I found out, was the source of the problem)
---------- Post added at 03:27 PM ---------- Previous post was at 03:27 PM ----------
licktheback said:
Do you have to go back to stock? Why couldn't you just flash to CM7 then go on to ICS? I am on Bionix 1.31 and this process just seems easier.
Click to expand...
Click to collapse
Yep you can, just make sure you make a back up and clear all data
licktheback said:
Do you have to go back to stock? Why couldn't you just flash to CM7 then go on to ICS? I am on Bionix 1.31 and this process just seems easier.
Click to expand...
Click to collapse
It's mainly to get rid of any ghosts left from other roms to avoid any bugs not caused from the rom you install and avoid giving a rom a bad review without giving it a clean canvas to start with.
powered by ICS Euphoria