I want to switch to HSPL 3.03. Currently I have HSPL 2.08, can I flash over it?
You can't do anything with HSPL 3.03, it must be 2.08.
Nigeldg said:
You can't do anything with HSPL 3.03, it must be 2.08.
Click to expand...
Click to collapse
See this page:http://forum.xda-developers.com/showthread.php?t=1114053&page=83
and this:http://forum.xda-developers.com/showthread.php?t=1114053&page=84
Anyways, flashed hspl 3.03 over 2.08. cLK and tytung' CM9 ROM booted fine and data was also more stable than the previous HSPL.
cLK doesn't have limitations as to which HSPL is installed. MAGLDR on the other hand does!
In that case my bad, thanks for the info I still use MAGLDR but at least I won't make the same mistake in the future.
works with cLK1.5-rc0 HSPL 303?
Yes, it does work. But I don't really see that much of a difference though. I never had a data drop (cLK 1.4 and recently switched over to 1.5) and with 3.03 I still don't have drops .
So I'm back to 2.08. [In case of a sudden UltraFruit )
fouadi said:
works with cLK1.5-rc0 HSPL 303?
Click to expand...
Click to collapse
Works with every cLK
Related
Hi im using android from my sd card and i woud like to try nand as i never use winmo
so my question is, is my radio 2.12 compatible with magdlr and android from nand?
and i have HARDSPL 2
anyone? i need to know before i try something stupid and brick my phone
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
pakure said:
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
Click to expand...
Click to collapse
Nearly right - any radio above 2.08, but must be a .50 version, NOT a .51. Just be sure about that
my leo is a 512mb t8585 so im fine right?
Yes mate. You'll need to get HSPL installed in order to use magldr though. You can get that here...
http://forum.xda-developers.com/showthread.php?t=611433
See post 2 for HSPL3 (2.08)
i already have it HSPL2
radio version 2.12.50.02_2
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
metko said:
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
Click to expand...
Click to collapse
unlikely. most flashing errors that result in serious problems happen when the fail occurs whilst the spl or the radio portion are being flashed.
neither of these parts are flashed when flashing a nand rom, cos they're already set.
If a bad nand flash occurs, just go into bootloader/magldr and you should be able to flash again.
Changing radio, and flashing stock wm roms are the ones you wanna be carefull of. If your power is shakey, don't flash these too often.
ok thnx will try most likely mdj's cynanogen mod 7 today
BIG THNX to everyone i can not click thnx that many times
instaled MAGLDR1.12 then md'j cynanogen mod 7 2.3 gingerbread, i did al of this for about 10 min soo fast ,again thnx to everyone
Hello everyone
I know this is a question that has been asked 100 times before, but a post from mskip got me worried.
Here's my problem:
- I want to install a Gingerbread ROM on my HD2. I have understood everything about how to do that, thanks to XDA.
- My HD2 is currently running a Winmo 6.5 3.14 stock ROM from HTC's website.
- To install it, I had to install SPL3 on my phone. So on bootloader, my phone now shows SPL-3.03.HSPL (Cotulla HSPL btw, thanks Cotulla )
- And to install the Android ROM, I know I have to downgrade to SPL-anything between 1 and 2.
- I know you can do that by installing a stock ROM, but I read somewhere in a post by mskip that you CANNOT suppress HSPL3 by downgrading the ROM.
Anyway, in short, my question is:
Can I suppress HSPL3 and eventually manage to start the install of an Android ROM?
I'm not a complete noob, but not an expert either and I don't want to brick my phone or anything.
Thank you very much in advance
I don't understand what you mean by "suppress" it but basically all you need to do is to get 2.08.HSPL on your phone. How you do that is boot to 3.03 (volume down and power) and open HSPL3 on your PC. Then after it finds your phone etc. on the phone just choose 2.08.HSPL from the menu and flash that. Then after that installs you should be able to flash your radio and MAGLDR etc.
Sent from my HTC Vision using XDA App
Skellyyy is completely right you need to run the HSPL again on your HD2 and select HSPL version 2.08 HSPL because MAGLDR only supports 2.08 HSPL right now. You will hsve to flash MAGLDR in order to flash a Andriod ROM.
Thank you guys for the quick answers.
But the point is that the ROM I currently have (3.14) only runs with SPL3.
So if I downgrade to HSPL2.08, isn't there a risk that my phone is not going to be able to do anything after that, let alone installing Android?
See, that is a quote from the post I'm using to install Android. It says:
"A: Install HSPL3
Prerequisites
* Windows Mobile Device Center installed on Windows Vista / Windows 7 or
* ActiveSync installed on Windows XP
* You must have any SPL version from this list on your device:
o SPL 1.42.0000
o SPL 1.62.0000
o SPL 1.66.0000
o SPL 2.07.0000
o SPL 2.08.0000
o SPL 2.10.0000
(To check your SPL version, hold the Volume Down button and do a reset)
You should have this SPL version unless you are using the latest 3.14 ROM with SPL 3.03.0000. No worry, just downgrade your Windows Mobile ROM from v3.14 to v1.66 will do. Download HTC HD2 v1.66 ROM. Then downgrade your phone from SPL 3.03.0000 to SPL 1.42.000."
So it says here, downgrade to v1.66 ROM, and then downgrade from SPL3 to SPL1.42. That is not very clear to me. Isn't that supposed to be the same thing?
If downgrading to ROM 1.66 downgrades SPL to 1.42, then why should I AFTERWARDS downgrade from SPL3 to SPL1.42? Isn't that going to be already done?
And more importantly, you guys say I should simply run HSPL and choose an appropriate version, which is yet another method than what is explained above...
Oh boy I'm confused...
Magnus.LPA said:
Thank you guys for the quick answers.
But the point is that the ROM I currently have (3.14) only runs with SPL3.
So if I downgrade to HSPL2.08, isn't there a risk that my phone is not going to be able to do anything after that, let alone installing Android?
Thanks
Click to expand...
Click to collapse
No need to worry my friend I am currently running a 3.14 ROM as you can see by my sig. I also have HSPL 2.08 on my HD2 just incase I decide I want to run Andriod or flash a custom ROM. I can tell you my HD2 is working just fine.
No those prerequsites are just the showing you the SPL version that you habe to have to flash HSPL 3. You only have to have ond of those versions but it has to be a version included in the list or you can not flash HSPL 3. If you do not have one of these versiond then the flashing to 1.66 then to HSPL 3 is just MSkip telling you how to get a SPL version needed to flash HSPL 3. But this is not needed now as there is a HSPL 4 version now that allows you to flash 2.08 HSPL when you have SPL 3.08.0000 or SPL 3.10.0000 with out having to downgrade your ROM.
So that basically means I should get HSPL4, run it and choose HSPL2.08 for example, and then I will be able to follow all steps to install and Android ROM?
Correct?
T-Macgnolia said:
No need to worry my friend I am currently running a 3.14 ROM as you can see by my sig. I also have HSPL 2.08 on my HD2
Click to expand...
Click to collapse
You have a tmous,,, you can't run 3.14 roms on a reg hd2 with any spl except 3.03.0000 or 3.03.Hspl.you get very unstable phone that thinks it has the 576meg ram unlocked but only really has 200 or so,with only 50 or so free for user apps. Unuseable.
OP correct, into bootloader, Hspl 4, 2.08.Hspl then back into bootloader and flash magldr from there.
samsamuel said:
You have a tmous,,, you can't run 3.14 roms on a reg hd2 with any spl except 3.03.0000 or 3.03.Hspl.you get very unstable phone that thinks it has the 576meg ram unlocked but only really has 200 or so,with only 50 or so free for user apps. Unuseable.
Click to expand...
Click to collapse
Samsamuel I do understand what you are telling me here and I was a little concerned about this when I first flashed the HSPL 2.08 to my HD2. But to be honest I have noticed no real change in my HD2's performance compared to before. Also to be fair though I only have 5 nonpreinstalled apps on my HD2 as I found early on with my HD2 that a lot of apps can effect the performance of the HD2. I also never have more than two apps running at the same time as a rule too.
At the OP yes download and run HSPL 4 and choice 2.08 HSPL and you will be good.
T-Macgnolia said:
But to be honest I have noticed no real change in my HD2's performance compared to before.
Click to expand...
Click to collapse
because you have a tmous,,,,,, tmous 3.14 rom comes with spl 2.10.0000 and works with 2.08.xxxx, (or it may come with spl 3.03.0000, im not sure, but it doesnt require it, and your phone is proof of that) however the regular 3.14 roms come with and will not work without 3.03.xxxx.
Oh I get what you are saying now the TMOUS can do this but the EU can not. I was not aware of this. Sorry it took a minute for me to understand, I have been sick for like two weeks so my head is a kittle foggy because of it lol.
heh, it doesnt get mentioned often in relation to tmous.
tmous users never get the unstable system/bad ram error when they flash 3.14, regardless of the spl, so they never need to notice what the spl is before / after, so dont notice it didnt get updated.
Im sick too, its the time of year for it. Not that anyone would notice teh difference, i am still sat hunched over the keyboard, swearing under my breath occasionally at anyone who gets close,,,,,
Sam, it wouldn't really matter though would it? As he plans on flashing MAGLDR straight away so there wouldn't even be WinMo on the phone to make it unstable?
Sent from my HTC Vision using XDA App
Oh no course not, all that stuff is fine.
Thank you very much guys, this is all very clear for me now.
I now know that HSPL4 -> 2.08 -> then droid flash is doable for me
Good night/day to you all.
so i have a tmobile HTC HD2.
so i have read a lot and i think i am ready to flash to the NAND thing if i am right. so here is what i have.
i am running WM 6.5 and hate it. but that is why i am doing this
my radio is 2.15.50.14
my SPL is 2.10.0000 8G XE
from what i have read i need to do the following files in this order
run HSPL4
then
MAGLDR 1.13
then i have
Rom_Desire_HD_1.84.832.2_v1.1.1_RAF1.9
and after all of the i will be runnig droid i think?
so on another question. will this flash my SD card as well? can i just take it out and run it and then keep those files. or should i back up the data then format it?
once all done i just set it up to outlook and i am back up and running
is the ROM i have chosenthe best for battery and stability oristhere another?
thanks just dont want to brick my phone. but i think i am ready.
Jar
jarporte said:
so i have a tmobile HTC HD2.
so i have read a lot and i think i am ready to flash to the NAND thing if i am right. so here is what i have.
i am running WM 6.5 and hate it. but that is why i am doing this
my radio is 2.15.50.14
my SPL is 2.10.0000 8G XE
from what i have read i need to do the following files in this order
run HSPL4
then
MAGLDR 1.13
then i have
Rom_Desire_HD_1.84.832.2_v1.1.1_RAF1.9
and after all of the i will be runnig droid i think?
so on another question. will this flash my SD card as well? can i just take it out and run it and then keep those files. or should i back up the data then format it?
once all done i just set it up to outlook and i am back up and running
is the ROM i have chosenthe best for battery and stability oristhere another?
thanks just dont want to brick my phone. but i think i am ready.
Jar
Click to expand...
Click to collapse
you need to downgrade your spl from 2.10 to 2.08 hspl in HSPL 4, keep 2.15.50.14 radio, do a task 29, backup your sd card, install MGLDR 1.13, then Clockwork mod, in clockwork mod, format sd card to 1024mb with a 0 swap, then flash rom thru CWM. there's a lot of good roms you just have to try them and choose what suits you best.
how do i downgrade to 2.08?
sorry i still don't get all the lingo on this
jarporte said:
how do i downgrade to 2.08?
sorry i still don't get all the lingo on this
Click to expand...
Click to collapse
your phone came with 2.10 spl, with HSPL 4 you should be able to select from the drop down menu the 2.08 hspl, you need hard spl to get any of this to work.
check this http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3 and you'll understand!
I tried installing NAND Android ROM several times with no success. Every time I got stuck at the boot screen after installing Android. And each and everytime I used the HD2 Toolkit to Wipe and install MAGLDR once again, and tried installing Android with other ROMs and other Radios.
Now in the end, MAGLDR won't boot at all after installing it, and I'm stuck at the HTC logo without anything installed.
EDIT: I forgot to mention that this happened after I installed HSPL 3.03.
HSPL 3.03 is not compatible with MAGLDR (basically, it is not compatible with Any Android Bootloader, it is only for winmo roms)
Downgrade to HSPL 2.08 and flash MAGLDR again, you should be alright.
Saying "downgrade to hspl3" and "Hspl4 aka 3.03" is not only incorrect but it's confusing too, and almost certainly will make people think they need to flash a stock rom to downgrade 3.03 to 2.x so that hspl3 will work,,,, which is not necessary.
@OP He was correct that 3.03 is the problem,, magldr will only start when spl is 2.08.hspl.
You should run Hspl4 and choose 2.08.hspl in the dropdown. No hspl3 or downgrading necessary.
samsamuel said:
Saying "downgrade to hspl3" and "Hspl4 aka 3.03" is not only incorrect but it's confusing too, and almost certainly will make people think they need to flash a stock rom to downgrade 3.03 to 2.x so that hspl3 will work,,,, which is not necessary.
@OP He was correct that 3.03 is the problem,, magldr will only start when spl is 2.08.hspl.
You should run Hspl4 and choose 2.08.hspl in the dropdown. No hspl3 or downgrading necessary.
Click to expand...
Click to collapse
Yeah, I read through loads about HSPL before flashing NAND and this really confuzzled me :S
samsamuel said:
Saying "downgrade to hspl3" and "Hspl4 aka 3.03" is not only incorrect but it's confusing too, and almost certainly will make people think they need to flash a stock rom to downgrade 3.03 to 2.x so that hspl3 will work,,,, which is not necessary.
@OP He was correct that 3.03 is the problem,, magldr will only start when spl is 2.08.hspl.
You should run Hspl4 and choose 2.08.hspl in the dropdown. No hspl3 or downgrading necessary.
Click to expand...
Click to collapse
Thank you for pointing that out, and correcting me
I edited my post in case of further references .
Marvlesz said:
Thank you for pointing that out, and correcting me
I edited my post in case of further references .
Click to expand...
Click to collapse
no worries, , however to be picky about it, (sorry, not having a go, just keeping things accurate )
Marvlesz said:
HSPL4 is not compatible with MAGLDR
Click to expand...
Click to collapse
is still wrong, because hspl4.exe is just a loader, and inside hspl4 is contained images of
2.08.0000
2.08.hspl
3.03.0000 and
3.03.hspl
So, you can use hspl4 to apply 2.08.hspl and android will run fine. Once teh spl is loaded, the phone has no clue whether you used hspl2, 3 or 4 to apply 2.08.hspl, so saying 'hspl4 isnt compatible' makes no sense.
samsamuel said:
no worries, , however to be picky about it, (sorry, not having a go, just keeping things accurate )
is still wrong, because hspl4.exe is just a loader, and inside hspl4 is contained images of
2.08.0000
2.08.hspl
3.03.0000 and
3.03.hspl
So, you can use hspl4 to apply 2.08.hspl and android will run fine. Once teh spl is loaded, the phone has no clue whether you used hspl2, 3 or 4 to apply 2.08.hspl, so saying 'hspl4 isnt compatible' makes no sense.
Click to expand...
Click to collapse
HaHa .. looks like I'm still confused
Anyway, edited again
Marvlesz said:
HSPL 3.03 is not compatible with MAGLDR (basically, it is not compatible with Any Android Bootloader, it is only for winmo roms)
Downgrade to HSPL 2.08 and flash MAGLDR again, you should be alright.
Click to expand...
Click to collapse
perfect. hehe (except that you dont need to flash magldr again, , , set teh correct hspl and reboot, magldr will start.)
you could also just download hd2 toolkit. it has everything you need to install android and wp7. just another option to explore
My phone is T-mous version. After I installed the WP7 ROM, when it boot (after Go, Go, Go!!!) it reset itseft. I dont understand.
Need your helps. Thanks all
check HSPL and hardware radio version
change sdcard...
dxdy said:
check HSPL and hardware radio version
change sdcard...
Click to expand...
Click to collapse
I use HSPL 2.5
And radia version is 2.15.50.14
I've changed SD card too
you must use HSPL 2.08
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Thanks bro.
The issue is gone if I take out the battery for a while, after that, it can boot to WP7.
I just dont know what happen to it?
I have flashed right radio, right hspl, and the maglr
What is your partition size?