i9000 flashed full flash of i9000XXJVT with pit 512
after flash phone goes to recovery to make its thing , and phone stuck on the yellow write while
--- copying media files ...
it just stuck there no metter what i do.
if i take battery out and turn phone again , it goes there and stuck there again
maybe some memory problem ?
ideas ?
put it in download mode and reflash it with Odin ?
Vormson said:
put it in download mode and reflash it with Odin ?
Click to expand...
Click to collapse
Did..... Few times.... Same problem each time
trabel said:
Did..... Few times.... Same problem each time
Click to expand...
Click to collapse
NO way to recovery ur s2 to normal mode...
pls go to samsung serv cntr, Actuly serv centr is not givn Warrenty They wil ask to change Main board @ Rs7400 (in kerala) Warrenty is not vailable in this condition....yestrday i will go to serv cntr this same problum Srv cntr not ready to giv warrnty Visakh varkala
visakh143 said:
NO way to recovery ur s2 to normal mode...
pls go to samsung serv cntr, Actuly serv centr is not givn Warrenty They wil ask to change Main board @ Rs7400 (in kerala) Warrenty is not vailable in this condition....yestrday i will go to serv cntr this same problum Srv cntr not ready to giv warrnty Visakh varkala
Click to expand...
Click to collapse
this is s1 not s2 and i got no samsung center in here , so its no metter if i go or not
i need to fix it by myself
the phone have no water damaged or something like that , so i wonder if the main storage flash ic is bad or anything i can fix ? soft or hard thats the Q
i dont want to start messing with hardware if its a soft problem
Download ROM again from a site you can verify md5 hash the file and preferably PDA, MODEM, CSC of type *.tar.md5 to use the same check in Odin when flashing.
Thx for reading, press THANKS if u like
O-T said:
Download ROM again from a site you can verify md5 hash the file and preferably PDA, MODEM, CSC of type *.tar.md5 to use the same check in Odin when flashing.
Thx for reading, press THANKS if u like
Click to expand...
Click to collapse
Well i can download again , maybe other rom
But this one is woring for sure on other i9000
And its modem, pda and csc.
I will try other snd will post results
Related
wrong flash....now my phone in bootloader... helpp
how to flash this phone and make it alive again
and i tryed the other solution also and it didn't work
give me solution... thanks so much
nice - same thing here...
but i think my phne had a bug anyway, started rebooting every 5 minutes...
normal RUU crashed with #260 and then #277...
flashed with sdcard, system says "succsess" - but halts in bootloader!
getting replacement (again) tomorrow...
dont know how to solve my problem but yours perhaps:
try to put the RUU_signed.nbh file (if u have a original RUU updater .exe file u need to search for RUU_signed.nbh on ur disk) on ur fat32 fomated sd, rename it to HERAIMG.nbh and reboot!
u should end in a flash-tool...
slide the volume-button down to initiate update/flash...
it will tell u when it was successfull...
if is in bootloader mode , still is not dead , simply flash it
Hey Guys .. How u doin?
Ok now ..
i wanted 2 Flash The linuxDX kernel 2 my phone
Thru the Flashtool .. On my Pc
Anyway
Downloaded The file put it in place ..
Turned off the phone (( i FORGOT 2 TICK THE USB DEBUGGING )) !
So Turned the flasher On .. Clicked on Flash
i selected the LinuxDX on the Right there was Loader.sin And kernel.sin
i've chosen Both .. Anyway .. While Flashing .. Got an Error
Telling me 2 Tick the usb debugging .. I said no problem
Disconnected the phone
Then clicked the power button..
shakes .. Then nothin ..
Wtf???? Screen is Dead??
i waited .. so it goes on
Tried 2 call with another phone ..
its off.. Uhmm???????
..
Okay
No problem
Turned SEUS ( sony ericsson update service )
Started the repairing Process
The phone is connected FINE!!
software is downloaded .. Damn !!
Installing the software ..
Wait ..
It's Stuck .. ?
waited even more..
Still stuck :S ??
After a while i got this:
__________________________________________________ _______________
The installation Failed
Please disconnect the phone and make sure the battery is fully charged before trying. if the problem presists, please contact support.
For more information and help please See .. ETC !!
__________________________________________________ _______________
So now .. i go back to you guys..
Please??
Help my little Device
:/ !!!
did u unlock your bootloader before flashing the kernel?
dmcb123 said:
did u unlock your bootloader before flashing the kernel?
Click to expand...
Click to collapse
Yes i Did !!
I REALLY NEED HELP!
please follow on this Thread http://forum.xda-developers.com/showthread.php?t=1294021
Have u got the .ftf file for the 015 baseband?
Hey friend need help from you guys i have a Samsung focus which i got from my friend and this phone does boot its hangs at the Samsung boot screen. What i know about this phone its a refurb piece from at&t apart from that i don't know anything what OS version it was running.
So this is what i have tried so far.
I tried to hard reset the phone but when i tru to put it to the reset mode the second it goes to the mode it restarts and and comes back to the boot screen, but some how i managed to format it but to ass no luck with the formatting.
Tried the Download mode also and tried to flash the stock ROM from http://forum.xda-developers.com/showthread.php?t=1131022 but i got an error >
THIS NOT AN RETAILS DEVICE, How come it cannot be a retail device if it is not an retail device then do we have any other rom for this specific phone which is not an retail phone ?
I searched for this (NOT A RETAIL DEVICE) and was not able to find anything.
Any help from you guys will be really appreciated.
Thanks.
More info about the phone.
Samsung Focus
OS Version- No idea what it was running.
Build- 1012
REV 1.3
Try the Flasher from this post (4th link, WP7 Downloader 7.41).
Extract the UCJK2 rom and instead of WP7 Downloader 7.05 try that one.
If that fails you may have to flash a custom rom (see the post in my sig). Or wait for someone with a better solution.
Thanks for replying mate, Tried the stock rom with the downloader u have suggested but i get following errors.
Partition image is not equal do u erase and download all ?
If i press YES on that window i get this> SPH-I350 Downloader has stooped working and ask me to close the program ?
And if i press the NO the windows close and phone boots to Samsung boot screen from download mode.
To add to the above can i flash custom rom over this as the phone only goes to Download mode ?
rkkaranrk said:
To add to the above can i flash custom rom over this as the phone only goes to Download mode ?
Click to expand...
Click to collapse
You can try. However first things first.
Can you try using both flashers from the UCJK2 rom?
WP7 Downloader Ver 7.21 for All Device (Publish version).exe
WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X).exe
Normally you should be able to flash UCJK2.
EnderPsp said:
You can try. However first things first.
Can you try using both flashers from the UCJK2 rom?
WP7 Downloader Ver 7.21 for All Device (Publish version).exe
WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X).exe
Normally you should be able to flash UCJK2.
Click to expand...
Click to collapse
Tried the WP7 Downloader 7.21 and got this error
The device does not match with the selected binary, Downloader will not do anything.
With WP7 Downloader 7.05 i get this.
This device is not retails device, Downloader will not do anything.
If you can get into download mode then try installing MAGLDR, then once in MAGLDR install a custom ROM. It won't do any checks for RETAIL or otherwise and will just flash what you tell it to.
tried to install MAGLDR but but after the installation completed it said it will reboot to the mag mode but it dint and booted to the Samsung logo.
you have to press and hold vol-down + camera then power on the device. It should propmt you to format or press '<-' just press '<-' and then you will be in MAGLDR.
Yeah I was able to boot into MAG and the I tried to flash the clean rom 2.0 but it gave me an error- wring size block inside ......I have heard about bad blocks but what is this wrong size ?
To add to above phone goes to download mode easily but to get it to the format screen I have to try 100 time.
Sent from my GT-I9000 using Tapatalk 2
rkkaranrk said:
Yeah I was able to boot into MAG and the I tried to flash the clean rom 2.0 but it gave me an error- wring size block inside ......I have heard about bad blocks but what is this wrong size ?
To add to above phone goes to download mode easily but to get it to the format screen I have to try 100 time.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
It sounds like someone at some time tried to flash a Focus v1.4 ROM to your v1.3 phone. This is what happens when someone does that. There is no fix currently. Sorry.
Hmmmm........will there be any chance for the fix in future ? Or should I sell it as parts....
Sent from my GT-I9000 using Tapatalk 2
rkkaranrk said:
Hmmmm........will there be any chance for the fix in future ? Or should I sell it as parts....
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
It's an old device so there probably wont be too much in the way of new development/fixes, but no one can say for sure.
same here
I have the same problem too, my samsung focus stuck on samsung screen. Can you please provide some steps on how to flash it, and also can you please provide the links on where to download the tools needed to flash my phone.
Thank you so much.
I´m stuck in the same.
I buy this phone on ebay por pars.
on the back says REV 1.3 but when i try to restore in WP7 7.41 says WP7_PRODUCT_4K_DETECTED CC
if i try to restore with 1.3 says that is not correct.
Sometimes goes t recovery, something not.
magldr is installed, and when i try to install a rom for 1.3 says something that block number is incorrect.
any possible solution or is dead?
thanks!
After looking everywhere on the internet and only finding dead links I'm asking here if someone still had a copy of the
RUU_Glacier_Gingerbread_S_Videotron_CA_2.10.1530.1_Radio_12.55.60.25_26.09.04.26_M_release_188466_signed.exe
in order to unroot her panache. I did find the myTouch 4H but I really need the videotron one. Can some provide me a copy if you have any.
Thanks alot guys and girls I appreciate it
Looks like it could be this file: h**p://d-h.st/36x
I'm looking for the same file, my phone is stuck in boot loop and factory reset doesn't work.
Nope, that's not it.
I got mine working by pressing volume down button when Videotron logo shows up and now it boots in safe mode.
tt33333 said:
Nope, that's not it.
I got mine working by pressing volume down button when Videotron logo shows up and now it boot
my mb also stuck on mytouch 4g logo..
i try to wipe data via recovery its giving me error as fail pu..
might be only riff box or polar box can solve or problem..
hw this file will work for us plz tell me since from last 4 day i m daily searching stuff how to wake my mb from dead state..
plz reply:crying:
Click to expand...
Click to collapse
ok first of all....if u r getting stuck on logo or for that matter any screen...u r NOT hard bricked...so put the jtag away...unless u really wanna make sure u carry around a dead phone = brick!!!
I put in a link for you on ur other thread but will put it here as well to help rener.....rener I have a mobilicity panache n I was able to successfully root using this guide http://forum.xda-developers.com/showthread.php?t=1178912 just use that n u will be good to go
nilesh.wankhede said:
tt33333 said:
Nope, that's not it.
I got mine working by pressing volume down button when Videotron logo shows up and now it boot
my mb also stuck on mytouch 4g logo..
i try to wipe data via recovery its giving me error as fail pu..
might be only riff box or polar box can solve or problem..
hw this file will work for us plz tell me since from last 4 day i m daily searching stuff how to wake my mb from dead state..
plz reply:crying:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
IndianKarmas said:
ok first of all....if u r getting stuck on logo or for that matter any screen...u r NOT hard bricked...so put the jtag away...unless u really wanna make sure u carry around a dead phone = brick!!!
I put in a link for you on ur other thread but will put it here as well to help rener.....rener I have a mobilicity panache n I was able to successfully root using this guide http://forum.xda-developers.com/showthread.php?t=1178912 just use that n u will be good to go
thnx 4 ur attention i will try now
Click to expand...
Click to collapse
Guys I flashed the larest firmware and getting drk not install error
Plz help me what to do now
My phone is not booting up, stucked on samsung logo
Plz help fast
:crying::crying::crying:
ashish1989 said:
Guys I flashed the larest firmware and getting drk not install error
Plz help me what to do now
My phone is not booting up, stucked on samsung logo
Plz help fast
:crying::crying::crying:
Click to expand...
Click to collapse
I m not getting eng boot file on internet
Can u help me
ashish1989 said:
I m not getting eng boot file on internet
Can u help me
Click to expand...
Click to collapse
https://shell.boxwares.com/Download.aspx?L=1237
garylawwd said:
https://shell.boxwares.com/Download.aspx?L=1237
Click to expand...
Click to collapse
Ok let me try will reply shortly
After flashing the above file phone is not booting up
No response at all
No recovery no download mode no charging just like its dead r8 now
What to do now???
Have I bricked my phone
Update : my phone flash ic is damaged now
Local repair guy is charging me 1000 rupees
After flashing the above file it caused me the problem
Really sad today...
ashish1989 said:
Update : my phone flash ic is damaged now
Local repair guy is charging me 1000 rupees
After flashing the above file it caused me the problem
Really sad today...
Click to expand...
Click to collapse
Not the above file. Maybe you already damaged it which gave you the drk error.
garylawwd said:
Not the above file. Maybe you already damaged it which gave you the drk error.
Click to expand...
Click to collapse
But sir atleast the phone was working and booting normally
And I was able to flash firmware normally in it
But what can we do now
I will give my phone tomorrow for repair
I know this an old thread, but DO NOT DOWNLOAD THE FILE ABOVE, it will fry your phone completely