Related
I would like to know if it's possible to make a Nand Backup via recovery screeen and then recover it in another Tatto, so I can export the ROM, with apps and settings to a friend's tattoo
If not, is there any other way?
Thanks in advance
Zriel said:
I would like to know if it's possible to make a Nand Backup via recovery screeen and then recover it in another Tatto, so I can export the ROM, with apps and settings to a friend's tattoo
If not, is there any other way?
Thanks in advance
Click to expand...
Click to collapse
i did that...it should work...for me all right
Sure it's possible! Since you have identical HW he will get an exact copy of your device (don't know if cache partition is cloned though, could be necessary when using custom ROM using cache as dalvik cache...)...
samsung
Do you think samsung is better ???
they may answer but some thing like "we know it is a problem, but we are working on it, and can not help you now..."
john
Well, I have to say that it hasn't been any success, so it seems not possible. Maybe there's something I gave made wrong, but it says that Nand backup is not possible.
Zriel said:
Well, I have to say that it hasn't been any success, so it seems not possible. Maybe there's something I gave made wrong, but it says that Nand backup is not possible.
Click to expand...
Click to collapse
you have to copy the content of HT99****** into your device's HT99°°°°°°°°
don't copy the HT99****** folder because that is the code of the phone backupped...it is compared with the device to restore and they doesn't match ...
so copy the subfolder of the desired backup to your /HT99°°°°°°°
try this
I need a .img of the original rom, where can i find? Thanks
Aran83 said:
I need a .img of the original rom, where can i find? Thanks
Click to expand...
Click to collapse
You cant, every NST is unique and using an image from another NST will cause trouble for both you and the NST it came from.
Thanks, nook is bricked but I can read the main partition, which .img I install?
Sorry for my english.
Aran83 said:
Thanks, nook is bricked but I can read the main partition, which .img I install?
Sorry for my english.
Click to expand...
Click to collapse
There's no img you can install.
You can try booting n2T-Recovery (v0.2) from a SD card and see if that helps. (Do not write that image to your NST!)
If not, send me a PM and I'll try to help you out
Something else you can try:
1) Flash noogie.img to an sd card.
2) Hook up your nook to a pc via usb once it has booted, and you should see all the partitions exported there.
3) In one of those partitions (recovery maybe? I'm struggling to remember), there's a factory.zip, which you can then install using the "Install from zip" feature of clockwork mod.
If you go this route, you'll have to reflash your sd card with clockwork mod after you've extracted the factory.zip using noogie.
Seems like kind of a pain, but I just recovered my device using this.
Remains in the screen ROOTED FOREVER and i can't do anything
I think, for michaelwill's method, you need to have linux running. I suggest you to try ros87's suggestion.
if I use backup from nook of my friend?
Aran83 said:
if I use backup from nook of my friend?
Click to expand...
Click to collapse
That is not a good idea, since each NookTouch has a unique information to register. If you are thinking of full restore from your friend's image (1.8GB image), it will overwrite your unique information. In that case, you and your friend's devices cannot register to BnN (or just one device). People says the info is stored in /rom. If you want to know more, you need to dig more. Otherwise try factory reset suggested by ros.
herofmm said:
That is not a good idea, since each NookTouch has a unique information to register. If you are thinking of full restore from your friend's image (1.8GB image), it will overwrite your unique information. In that case, you and your friend's devices cannot register to BnN (or just one device). People says the info is stored in /rom. If you want to know more, you need to dig more. Otherwise try factory reset suggested by ros.
Click to expand...
Click to collapse
Correct!
Using a image from another NST is a very very bad idea!
There are a lot of stuff that's unique to your NST stored in /rom and in rombackup.zip on the Factory partition.
This includes:
Serial Number
Main Board Serial
Product ID
Manufacturing date
SHA hash of Private Key
Public Key in modulus form
WiFi Calibration file
Some unique binary file for your eInk screen
MAC Address
Battery Type
Duplicating the serial will make you or your friend unable to register with B&N
Duplicating / Faking the private/public key pair, will most likely make you unable to register with B&N (I'm currently testing this)
Duplicating a WiFi calibration can cause degraded WiFi performance
Duplicating that EPD vcom file (eInk screen).. well who knows
Duplicating the MAC will cause network troubles if used on the same network.
The wrong Battery Type (I've seen three different so far) can cause charging troubles, and will cause incorrect charge indication.
Don't go there!
NookRestore.img
Try writing NookRestore.img to an mSD card. (You can get a copy at my website: NootRoot)
Hard reset
I had issues rooting my NST and got stuck in a boot loop. After digging and digging through forums I finally discovered the secret to a hard reset. The instructions said to hold the power and the two bottom side buttons down together for over 20 seconds. That worked! My NST was back to when I pulled it out of the box. I then proceeded to re rooting. (my mistake was I did not upgrade the OS before rooting). My bad. Hope this helps someone recover from a stuck boot loop.
Good luck.
chucktate said:
My NST was back to when I pulled it out of the box.
Click to expand...
Click to collapse
No it wasn't, Factory Reset doesn't remove root files or system apps installed by root tools, it only clears custom apps and settings.
While you might think it's back to stock, there are still leftover files and changes in /boot and /system
ros87 said:
Correct!
Using a image from another NST is a very very bad idea!
There are a lot of stuff that's unique to your NST stored in /rom and in rombackup.zip on the Factory partition.
Click to expand...
Click to collapse
Hi, I've just found a way around this - it is possible to restore somebody else's .img file, provided you've backup up your rombackup.zip. Then after, using Noogie, you can overwrite rombackup.zip and the contents of it which are on a different partition. The only danger is that you would potentially overwrite battery type config file, as Nook has couple of them. I gave it a try on mine and it seems fine.
sokoow said:
Hi, I've just found a way around this - it is possible to restore somebody else's .img file, provided you've backup up your rombackup.zip. Then after, using Noogie, you can overwrite rombackup.zip and the contents of it which are on a different partition. The only danger is that you would potentially overwrite battery type config file, as Nook has couple of them. I gave it a try on mine and it seems fine.
Click to expand...
Click to collapse
That is correct.
Problem is that most people who end up in a state where Factory Restore doesn't work has usually managed to overwrite their partition tables and part of the /rom partition.
And at this point it is too late to backup rombackup.zip as it's usually fragmented and cannot be recovered by ext2 file recovery tools.
So.. do a full backup before you do anything to your NST
I found if you restore with holding the two lower buttons it will remove all rooted files.
Googie2149 said:
I found if you restore with holding the two lower buttons it will remove all rooted files.
Click to expand...
Click to collapse
Read post 13 by ros87!
ros87 said:
No it wasn't, Factory Reset doesn't remove root files or system apps installed by root tools, it only clears custom apps and settings.
While you might think it's back to stock, there are still leftover files and changes in /boot and /system
Click to expand...
Click to collapse
Go to my website, download nookRestore.img and write it to an mSD card, Erase and De register, Power Off, then insert mSD then power up, then follow on screen instructions!
[OT - Removed]
[OT - Removed]
Torimu.Joji said:
I'll update the website and post links to XDA.
Click to expand...
Click to collapse
Thank you sir!
By posting proper links you help ensure that people get the most recent software and information
hii
anyone have unrooted NST V1.1.2 and model number BNR300 (not necessary) make an backup for me by noogie image and upload it to me urgently ......i am in a bad need for it that i can edit and restore my NST device again
thx at advanced
check this post
http://forum.xda-developers.com/showthread.php?t=1289233
need nook backup too
Hi,
did you find anywhere backup image?
I also need one, since my backup is corrupted and I already formatted, destroyed, deleted the NST's partition table.
I only have backup from a Nook touch Glowlight, but it is already registered to my friend, and her nook's serial (and other data in the rom partition) is different, so I cannot register again at B&N.
I think the solution would be a clean (unregistered) factory backup, or something like that.
Maybe you already have this, or you may know other solution.
If so, please share with me.
thanks in advance
Tamas
max hd said:
check this post
http://forum.xda-developers.com/showthread.php?t=1289233
Click to expand...
Click to collapse
my problem is resovled bro Max Hd , thx so much , Miss Renate helps me and now my nook works back again thx to her
acz1970 said:
Hi,
did you find anywhere backup image?
I also need one, since my backup is corrupted and I already formatted, destroyed, deleted the NST's partition table.
I only have backup from a Nook touch Glowlight, but it is already registered to my friend, and her nook's serial (and other data in the rom partition) is different, so I cannot register again at B&N.
I think the solution would be a clean (unregistered) factory backup, or something like that.
Maybe you already have this, or you may know other solution.
If so, please share with me.
thanks in advance
Tamas
Click to expand...
Click to collapse
ok , first .... u must have factory partition , it's VI file (have ur device ID , and serial , and mac address) .... then get any backup from same device model and and firmware version and burn it with ur nook then just replace files from factory partition to urs nook by burn ur old bad image (like my condition) on sd and boot up with ur nook with noogie and u must on linux OS by any linux live cd then after u did that restart ur nook and do hard reset to ur nook ( after your nook start up then very fast press two lower button on both right and left side) then u must have all register acc and talk to barns and nobol gently and tell them i just erase my nook and now it doesnt work and dont referee to anything that u root , then depend on ur luck (like me) they will active ur device again
good luck man , and i will try help u as i can .... let me just relax cuz i have search for 1 month and now i need relax and celebrate with my victory
have a nice day and good luck all
Guys, I had quite bad experience rooting my glowlight nook with touchnooter . Basically messed smth up so it couldn't start (just kept flashing). didn't save my back up. had to do unrooting with the software 1.1 that I guess was from nook without glowlight. Unrooting went fine, but the glowlight function is not working anymore. does anyone know how to solve this or could give me a link to download the proper software? thanks!
dukenookem said:
Guys, I had quite bad experience rooting my glowlight nook with touchnooter . Basically messed smth up so it couldn't start (just kept flashing). didn't save my back up. had to do unrooting with the software 1.1 that I guess was from nook without glowlight. Unrooting went fine, but the glowlight function is not working anymore. does anyone know how to solve this or could give me a link to download the proper software? thanks!
Click to expand...
Click to collapse
you should read the instructions better next time...
but making errors is human and you have a cool nick
I'll hopefully receive my glow in two weeks and I'll upload my backup then
You should make an effort to salvage your personalized data in /rom.
There is all the info in the p2 partition (/rom).
There is also a backup copy in the p3 partition (/factory) as rombackup.zip
You might do this with noogie or CWR and ADB.
Zorkman said:
you should read the instructions better next time...
but making errors is human and you have a cool nick
I'll hopefully receive my glow in two weeks and I'll upload my backup then
Click to expand...
Click to collapse
I could use that backup too, to revive my nook =)
I have an open thread here with all the efforts done so far http://forum.xda-developers.com/showthread.php?t=1805936
Nook Glow Backup Image
I have a backup image of a NSTG that I am uploading right now ... and looks like it just finished. Here it is:
dl[dot]dropbox[dot]com/u/98836278/nook-glow-backup.img
When you have the image downloaded follow these instructions:
blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch/
As a new user I am not allowed to post outside links.
Downloading, thank you so much!!!
I'll post again with the results...
YES, YES, YES, YES !!!!!!
leadbella thank you a million times!!
I downloaded the image, and wrote it ot my nook.
By the end of the operation, which took some 9 minutes or so, the process ended abruptly:
error 27 writing to disk at sector 3825664
I opted to ignore it and reboot the nook, just to see what happened. The nook booted alright.
I then booted in CWR and replaced /rom with the contents of my own nook /rom which I had salvaged.
I then booted again, and performed all the process flawlessly.
So far I have registered the device again (no error here since /rom contains my sensitive data. Don't know if it would work if the data was from the original image, since MAC address, device SN and some other parameters would not match), loaded a couple of books and started reading again.
Just in time for another one week shift (leaving tomorrow)
Leadbella you saved my..... nook =)
Thank you, I owe you one.
No problem at all. Looks like it worked for srgarfi ... dukenookem please let me know when you have finished downloading the image. I need to use my dropbox for other things at some point, but I can keep it in there until you finish downloading the image. If the image link above no longer works and anyone needs a copy of this image feel free to send me a message and I will try to post it back up.
The image is from a just out of the box NSTG with no information and nothing added to it.
leadbella said:
No problem at all. Looks like it worked for srgarfi ... dukenookem please let me know when you have finished downloading the image. I need to use my dropbox for other things at some point, but I can keep it in there until you finish downloading the image. If the image link above no longer works and anyone needs a copy of this image feel free to send me a message and I will try to post it back up.
The image is from a just out of the box NSTG with no information and nothing added to it.
Click to expand...
Click to collapse
Thanks Leadbella. Downloaded the backup. Tried to follow the instructions, but the size of you file is almost 2 gb, too large for my microSD. Didn't expect the backup file to be that large. gonna go look for a larger sd card.
Renate NST said:
You should make an effort to salvage your personalized data in /rom.
There is all the info in the p2 partition (/rom).
There is also a backup copy in the p3 partition (/factory) as rombackup.zip
You might do this with noogie or CWR and ADB.
Click to expand...
Click to collapse
That totally didn't make any sence to me. Sorry for my ignorance. Are there any instructions to follow? thanks.
Could not register
Hey leadbella, thanks for uploading the backup image. I downloaded and worte it to my nook STG. However, I couldnt get pass the setup process. Everytime I reach the log in menu, it will have the error logging in msg. Do you know what might be wrong?
Zaotr0pe said:
Hey leadbella, thanks for uploading the backup image. I downloaded and worte it to my nook STG. However, I couldnt get pass the setup process. Everytime I reach the log in menu, it will have the error logging in msg. Do you know what might be wrong?
Click to expand...
Click to collapse
You should have saved your /rom files before ovewritting your nook with leadbella's image.
And I'm afraid there not anything you can do to recover your unique /rom files for your nook now.
Oh, I was concerned that Leadbella had posted an unedited backup...
so, what is going on?
first: if a post about partitions isn't comprehensible to you yet -- you probably shouldn't root your device until you do enough reading that you understand it a bit.
Putting leadbella's file onto an SD card probably won't work as a way to restore; when I recover from an image, I use a usb cable and write from my computer to my device.
Leadbella seems to have taken a complete backup image from the device - this will include the important /boot and /system partitions (which is good) but will also include the /rom partition, which unfortunately is unique to every device.
So, if you restore from that image and don't have access to your own /rom partition or recovery image, you're going to wind up attempting to register a second copy of Leadbella's Nook to your account. Fortunately for Leadbella, that won't work.
Now, what can you do to repair and get a corrected nook which can be registered?
I'm going to try an experiment - I'm going to start by backing my device up in its current state.
(I do this by making a Noogie disk
Booting from Noogie
Connecting to my computer
using the command dd if=/dev/sdX of=/dev/currentnookglow.img bs=1M
where X is the number of the device that pops up when I connect my NSTG to the USB port.)
That requires linux; if you don't have linux, you can install VMWare Player (Free) and then install linux in that.)
What I'm going to try doing:
- back my system up
- image with Bella's file
- delete the file /rom/devconf/MACAddress from the imaged device
- reboot the device
- see if I can now see the real, physical MAC address, either on the device (unlikely) or on my router (likelier)
If I can see the MAC address, recreate the file with the correct values for Mac and also create a correct file for serial number /rom/devconf/SerialNumber
Boot, and see if the device is registerable to my account.
BUT: right now, BN has blown out the Nook Touch register/deregister/register process. So I can't do the test until they fix that.
And if it does work, anyone trying it will need
- the noogie disk
- linux
For windows users, maybe, but I have not tried:
- a clockwork boot disk
- functioning ADB able to connect to your clockwork-booted device
(Some clockwork boots support ADB; some do not.)
as roustabout explains, you can write Leadbella's image to your nook (if in windows use win32diskimager or diskimage) and then take a look at the contents of /rom.
The fix the contents of macaddress and serialnumber, but only if you plan to use the nook with B&N services fix the rest of the necessary files.
If you just plan to use your nook as a standalone reader (yes, why not?) once registered you can just ignore the contents of /rom (at least until the next software update).
leadbella said:
I have a backup image of a NSTG that I am uploading right now ... and looks like it just finished. Here it is:
dl[dot]dropbox[dot]com/u/98836278/nook-glow-backup.img
When you have the image downloaded follow these instructions:
blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch/
As a new user I am not allowed to post outside links.
Click to expand...
Click to collapse
These links are both no longer available. Can someone post them to a mirror?
I'd really appreciate reup as well, since my backup is not working and I need to restore my NSTG.
before restoring from someone else's img, remember to salvage your own /rom partition since these files are unique to each device and you'll need them to register your nook prior to starting reading.
That said I can upload that IMG, but what's the best choice to do so? Any of the many filesharing services? Dropbox ? Google Drive?
require those images
Hi srgarfi, is it possible for you to please upload those images... i need them...
Please reupload the backup. I could really use it too.
the image I used, originally shared by LeadBella (thanks again!) is here:
https://www.dropbox.com/s/xikkjs627s9mw2r/nook-glow-backup.img
Remember to save your /rom files before applying the backup or you won't be able to register your nook on B&N to start reading.
Disclaimer
Before even consider reading this, know that I cannot be held responsible if following these steps will: brick your device, make your girl friend break up with you, start third world war or do any other kind of damage.
Motivation
This tutorial is intended to help people who did not make a full backup of their device and applied the Alpha-FormatTouch-2.zip to their device and as a result lost the GlowLight feature. It took me a couple of days to figure out how to revert to factory settings, and thus, I hope that I can save others time.
Preliminary
You need
Nook Simple Touch Glowlight, semibricked
SD Card
SD card reader
Downloads
Download the following files:
factory.zip - downloads[dot]nanophysics[dot]dk/nstg/factory[dot]zip (if you have a copy of your own factory.zip -- found on the partition /factory/ -- use that instead)
[ClockworkMod - downloads[dot]nanophysics[dot]dk/nstg/sd_128mb_clockwork-rc2[dot]zip
Install Clockworkmod on SD card
On Mac OS X, plug in the SD card and find the device using
Code:
$ diskutil list
I will assume that your device is /dev/disk1. Unmount the disk
Code:
sudo diskutil unmountDisk /dev/disk1
and write the ClockworkMod to it
Code:
sudo dd if=128mb_clockwork-rc2.img of=/dev/disk1
Copy the factory.zip to the disk and eject it.
On Windows you can use Win32Imager.
Install factory image
Power off your Nook and insert the SD card. Then power it up. After a while the CWM menu will appear (if you get a white screen press right-down). Select "install zip from sdcard" using the right side navigation to go up and down and u to enter. If you enter the wrong menu you can go back on right up. Now select "choose zip from sdcard" and choose factory.zip. Finally, click the option saying "yes - install factory.zip"
After a few minutes the installation is complete and if everything went ok, you should now be back to the original factory software.
Reset user settings (optional)
If you want your Nook to be completely reset, you can optionally do a reset of your settings. Power off you Nook. Power it up again and hold left and right down simultaneously for around 30 s. Answer yes twice. After a while your Nook has been reset.
Backup
Finally, it is time to do what you should have done in the first place (and probably also the reason why you are following this tutorial): Make a full backup of your Nooks internal SD card. See blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch for more information.
Thanks for the tutorial. However i just had a few queries.
1. My NSTG is rooted and functioning normally. Only glowlight does not work. Does your tutorial apply to such a device too.
2. How can i take backups of my current /rom and /factory partitions so that i can restore them in case of any eventuality.
Thanks a bunch in advance.
i just erase every thing . now my nook is completely messed up.
I can't find your factory.zip would you mind resend it please ?
shank21101985 said:
Thanks for the tutorial. However i just had a few queries.
1. My NSTG is rooted and functioning normally. Only glowlight does not work. Does your tutorial apply to such a device too.
2. How can i take backups of my current /rom and /factory partitions so that i can restore them in case of any eventuality.
Thanks a bunch in advance.
Click to expand...
Click to collapse
If your NSTG is rooted, this may remove rooting - at least I think, I did not try. However, you can always reroot.
Regarding backup, I would make a full image backup before starting. If you have a Windows box, follow the instruction on blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch and make a full backup of your system.
I have only done backup of individual partitions on Linux: Boot the device with noogie.img and plug it in. On Ubuntu,t 6-8 partitions should immediately appear.
jjinkou2 said:
i just erase every thing . now my nook is completely messed up.
I can't find your factory.zip would you mind resend it please ?
Click to expand...
Click to collapse
There was missing a slash in the URL. It has been fixed.
Are you able to register a device reimaged using this factory.zip to your BN account?
If not, it's a bit of a pain for folks.
I have a disk image made via
dd if=/dev/block/mmcblk0p1 of=/part1.img bs=1M
This contains teh whole of a US NSTG's first partition; restoring it using
dd if=part1.img of=/dev/block/mmcblk0p1 bs=1M
allows me to boot my device, and the glow still works.
This seems to be more likely to restore the glow function yet preserve the ability to register with BN - the factory.zip method is not generic, as far as I know, it will restore some other person's NST serial number, mac address and other identifiers to your device, won't it?
If someone will PM me, I'll send a zipped copy of my .img file to them and let them try using it to recover glow function and their own registration in a nook glow. If that works, it can be posted more widely.
roustabout said:
This seems to be more likely to restore the glow function yet preserve the ability to register with BN - the factory.zip method is not generic, as far as I know, it will restore some other person's NST serial number, mac address and other identifiers to your device, won't it?
If someone will PM me, I'll send a zipped copy of my .img file to them and let them try using it to recover glow function and their own registration in a nook glow. If that works, it can be posted more widely.
Click to expand...
Click to collapse
Remark that I recommend that people use their own factory.zip image. Nevertheless, all these data you mention are stored on the rom partition. To my awareness this partition is only overwritten if one applies rombackup.zip, but not by factory.zip. Thus, your B&N shop should be fully functional afterwards. I did apply someone elses factory.zip first, and I had no problems registering my device. However, if anyone would experience such an issue, please drop a line in this thread.
In any case, you should always do a full system image before following tutorials like this one, or for that matter, before apply someone elses partition images to your own device.
roustabout said:
Are you able to register a device reimaged using this factory.zip to your BN account?
If not, it's a bit of a pain for folks.
I have a disk image made via
dd if=/dev/block/mmcblk0p1 of=/part1.img bs=1M
This contains teh whole of a US NSTG's first partition; restoring it using
dd if=part1.img of=/dev/block/mmcblk0p1 bs=1M
allows me to boot my device, and the glow still works.
Click to expand...
Click to collapse
Judging from your other post (http://forum.xda-developers.com/showthread.php?t=1836188&page=4), the partition you have made a copy of, is the boot partition? If glow was already working, it will still work after overwriting the boot image.
However, if it was not working already, it is very unlikely that installing a new boot image will resolve the issue described here, since it is a consequence having downgraded the OS.
I had not understood that the device you're targeting with this thread is an NSTG running 100% noo simple touch software - the thread refers to a problem with the alpha touch formatter, but I had not realized that was the outcome of the tool.
I've seen a few people describe their NSTGs as "fine, but not glowing any more" and had not seen those folks explain that they were running NST software on the NSTG.
For those folks, I had thought copying in the boot environment and kernel would be helpful. My understanding was that the kernel in the NSTG at software 1.1.5 was different than the NST kernel; I was thinking that getting the kernel and other boot hooks ready was what was really missing.
Fortunately, there's now a 1.2.0 updater out, and I suspect that soon there will be a CWM installable 1.2.0 update which will be super helpful. (Though folks will still need a partition table - I think that would be another use of writing in a viable first partition followed by a restart, to get the partition table straightened out before proceeding.)
roustabout said:
I had not understood that the device you're targeting with this thread is an NSTG running 100% noo simple touch software - the thread refers to a problem with the alpha touch formatter, but I had not realized that was the outcome of the tool.
I've seen a few people describe their NSTGs as "fine, but not glowing any more" and had not seen those folks explain that they were running NST software on the NSTG.
For those folks, I had thought copying in the boot environment and kernel would be helpful. My understanding was that the kernel in the NSTG at software 1.1.5 was different than the NST kernel; I was thinking that getting the kernel and other boot hooks ready was what was really missing.
Fortunately, there's now a 1.2.0 updater out, and I suspect that soon there will be a CWM installable 1.2.0 update which will be super helpful. (Though folks will still need a partition table - I think that would be another use of writing in a viable first partition followed by a restart, to get the partition table straightened out before proceeding.)
Click to expand...
Click to collapse
Ok. No this thread is not intended for people who have destroyed partition tables etc., but only for people who have downgraded their software by using NST recovering guides on their NSTG device. I found it relevant to explain how this is done, since many people complain that their NSTG works, except that glow light no longer works. If they look into the software version they find something below 1.1.5, like 1.1 which was my case. I could not find a guide which explained me what to do after screwing up the software, hence this guide.
Partition tables and "accidently formatting" is a completely other issue. In the end, here the main problem is that people do not make a backup as they assume that everything is going to be fine. I assumed that myself. However, at some point I will have a look at the rom partition, because I think it is quite limited amount of information you find their. It should be possible to restore your Nooks serial number -- it is written on the package of the Nook -- after applying another Nooks image. I just received my second Nook so I am going to try this at some point.
Thank you so much for sharing the solution.. finally my glowlight works now !!
shank21101985 said:
Thank you so much for sharing the solution.. finally my glowlight works now !!
Click to expand...
Click to collapse
Hic, I cannot download the image file, my backup file was deleted, anyone can upload that image for me?
Thanks so much:crying:
factory.zip
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
john2k10 said:
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
Click to expand...
Click to collapse
So did you actually replace the factory.zip with one for the NST or did you just run a restore from, say, NookManager? I'm not too sure about this, but I think it's kind of difficult to wipe the factory.zip. Anyway, since I'm not familiar with the NTG, and you seem to have done something that others have also done before, have a look at this old thread and see if it gets you anywhere:
http://forum.xda-developers.com/showthread.php?t=1936458
john2k10 said:
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
Click to expand...
Click to collapse
Mmm......have a look at this:
http://waveswirl.blogspot.com/2013/01/xda-developers-tutorial-how-to.html
nmyshkin said:
Mmm......have a look at this:
http://waveswirl.blogspot.com/2013/01/xda-developers-tutorial-how-to.html
Click to expand...
Click to collapse
Its dead I need a glowlight factory image
can someone please re-upload the glowlight factory image please.... Thank you in advance