after vegacomb install,tab keeps looping at startup ! - Vega General

Hi
I bought this viewsonic 10s recently.
I tried to upgrade to vegacomb 3.2
I finally got the tab keeps stuck at vegacomb
Initial wallpaper. Forever
And these r my steps
1 I pressed back button 2 sec then power for 2 sec
Devise did restart.
2 I linked to my pc , n found a new device
I update it by the available driver in our forum
So far so good
3 I installed the modded v 2
It works until showing
Bootloader download failed.
4 so I restarted the tab , n copy vegacomb to sd card
I went to update software n selected vegacomb
5 from here I saw installing picture
Until now tab just stuck at vegacomb blue startup picture
I tried to do restart or any thing else nothing happen..
Any idea?
Thanc

now got this image
Uploaded with ImageShack.us
and at my devise i see this
entering Nvflash recovery mode/ Nv3p server
then stuck here

now got this problem
any idea????????
Uploaded with ImageShack.us

now it`s working
the problem was in the USB port of my retarded pc
i just changed the port to another one
and installed the great vegacomb nicely
thanxxxxxxxxxxxx

Related

Omnia 7 stuck boot screen

Hi,
New phone and new to Windows phone 7. Classic story - the phone has stuck in boot screen, it says only "Samsung Omnia 7" and that's all. I have tried all tips I could find from internet - took the battery out and let it sit, tried to hard reset it -nothing. Actually hard reset button combination seemed not to work - when I turn it on, holding camera and volume down buttons, nothing happens, it shows boot screen and that's all. It do switch to the download mode when I turn it on holding camera and volume up buttons. I tried to reflash it (got the rom files that it came originally), and after restart the situation is the same - boot screen stuck and nothing happens.
I used WP7_downloader version 7.41, Samsung USB drivers v5.02. The weird thing was that older versions of WP7_Downloader did not work - told that flash lock was on. 7.41 seemed to work, it erased and downloaded all areas fine. I don't know if this is normal, but the flashing process itself took about 120 seconds only. I tried alternative ROM (classic I8700XXJK1), the flashing time was slightly different, but nothing changed, after flashing the device restarts and stuck to the boot screen. As I have read the flashing process should took about 10 minutes or so? I waited for about 20 minutes and nothing changed.
Can I switch the device to some debug mode or do something else that could lead me to the reason the device is not booting?
Omnia 7 stuck at boot screen after
I upgraded to Mango last week and i now too am stuck at the "Samsung Omnia 7" boot screen.
The phone seemed to do two updates, the first suceeded no problem. I started the update before going to bed. In the morning it had completed the first and was awaiting my pin code to start the device. All good.
It then prompted about the Mango update. I clicked it and left it for an hour or so. Came back and zune stated it was on the step, "restarting the phone".
The phone was showing "Samsung Omnia 7", i left it for another hour and then came back, no progress.
Nothing i've found on the net up until today has worked for me.
I can enter the format and download modes still.
This is what i've found and tried so far.
1:
answers.microsoft.com/en-us/winphone/forum/wp7-wpdevices/samsung-omnia-7-bricked-stuck-in-boot-loop/76831b31-2c5b-4d3b-8f65-06111e1f3798
(Did a device wipe to factory defaults, and its still stuck at boot screen
2:
support.microsoft.com/kb/2547687
(yes this is an older issue but it looked like it was working until it said something about "flash lock").
Next step is a complete ROM reinstall. But i'd really like to find out precisely which ROM i should try and if Mango is the actual culprit. I'd like to reinstall Mango if possible.
My Omnia 7 was bought secondhand.
I am with Telstra NextG carrier.
After mango update mine is behaving strange too. It shuts down itself randomly and it is stucking at omnia 7 screen. After a few try I am able to open it. But I noticed something, it's shutting down much more while it's connecting to web or PC. Can this be related? Because I couldn't find another reason about that.

phone no response after isnatling Honor_for_U8800_B866SP02_2sys_Final using a CW 5.0

phone no response after isnatling Honor_for_U8800_B866SP02_2sys_Final using a CW 5.0.x.x
recovery in not working, after presingin the power comes a huawei logo , and phone is restarting lop.
After taken of battery , pushing power and volume + - pink screen is coming ,and computer see the image disk with boot , a do copy all files from prepered recovery on 2.2 fyro( before custom rom) , and that don't help, problem is that same.
I do try put "dload" on SD card with fyro oficial from huawei , using pink screen , but nothing is hapened.
10 times tryied with both of oficial 2.2 and 2.3.5 , just pink screen comes for 5 minute waiting next try....
recovery not working , dload not working... can somebody help to fix it ?
I have same problem, phone stucked at huawei logo, but it's not restarting, just stucked. It happened when i installed this http://forum.xda-developers.com/showthread.php?t=2295318&highlight=logo
PS: recovery is working
Try this stock rom :
https://mega.co.nz/#!C9gDwDqI!POQsP1wo9pLHqhequ0b8tWk3xpY7EXPR9m-nXvoQ7oU
Or try full flash
http://forum.xda-developers.com/showthread.php?t=1971266

Acer Iconia A500 stuck on android logo loop

Hi,
I have a problem with my Acer A500.
Basically its only turns on till Android logo splash and after that its only a loop.
I cant connect the tablet to the Pc, when plug the cable to the tablet, windows 7 is searching for driver but fail to found it. I have the lates drivesr for Iconia from the Acer website. I can hear the signal when the tablet is being connected but cant see the tablet in the explorer.
I can turn the Apx mode but nothing happends even used blackthund3r A500 manager, the device is not connected.
I have tried the update.zip method on sd card but didt work, same as hard reset when tablet starts I have:
Erasing Cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
boothing recovery kernel image
Recovery verified failed...
Tablet have not been rooted.
Any ideas how to unbrick it???
Many thanks for any help.
PROBLEM SOLVED!!!
After few hard reset attempts, tablet came back to life!
(Power Volume plus, lock screen combination)..maby this helps to others with similar issue

help with Lenovo A3000-H not booting

all the sudden while the tablet is working it reboots by itself
i decided to upgrade the firmware to a3000_a422_013_026_140926_ww_call_fuse after seeing it on my friend's tablet which he got it from the lenovo
the bad news this version is not available on the internet,so i had to go for an older version just to make sure that the tablet is not getting hacked
i got the flash tool ,new cable and connected the tablet while holding the volume down until i heard a device detected sound from my windows 7 then at this moment i released the volume down button.......the tablet was identified in device manager
something is wrong the tablet keeps connecting and disconnecting for no reason even on a different pc
i decided to upgrade and give it a try
it accepted the firmware without even hitting the rest button
i started the tablet from the power button then it started by showing the boot animation then bloop it turned off by itself
i went for this step 4 times : http://forum.xda-developers.com/lenovo-a3000/general/bricked-a3000-f-t2851065
it booted then turned off
i got nervous and tried again and hit the firmware/Upgrade button instead of the download button and strangely it accepted the firmware !!
tried to boot .......nothing!!!
now i am stuck !!
Help Please
Click the reset button ( tiny hole )on the back of the tablet then try to flash the file again

D802 Android 4.4.2 with Kernel Error stuck in Bootloop

Hi guys,
hopefully you can help me or link me to a thread with some help.
After 5 years my g2 broke down last week. I had the official Android 4.4.2 and have never flashed anything. Don't know if it has anything to do with it but i didn't have any free storage left of my 16gb (european version, so i gueass D802). The days and weeks before it warned me that i used all the storage and some apps won't work properly ( I didn't care because I ran without problems for month)
My phone broke down and now I am stuck in the boot loop. When I disconnect the battery on the back and then connect it again and plug it in my laptop the LG Logo will appear and the phone will charge. No Problem there, I still have battery left. When I try to turn it on the LG Logo will appear and then the display turns black, you know how this goes.
I can not enter the recovery mode nor the download mode. My Laptop wont recognize my phone on the device manager or somewhere else. What my laptop does, is that the typical windows sound comes when I plug the G2 in and then after some seconds the sound comes again when the phone turns black.
Then I got a error message:
Kernel Crash! DemiGod Crash Handler : Kernel Crash!
From there I did not reboot successfully. How can I get a Kernel Crash with the normal Android Software? weird.
All I care about are my pictures left on the phone. I was dumb enough to not make a backup. Do you know a way to save my pictures? Can I somehow exchange the storage chip?
Please help me.

Categories

Resources