hi, my htc elf is knocked to the floor, and since then my screen is white, but is still in operation, only the problem that is not seen the best of white. Do I have to change my display or is it possible to fix it somehow?
Nikolasta said:
hi, my htc elf is knocked to the floor, and since then my screen is white, but is still in operation, only the problem that is not seen the best of white. Do I have to change my display or is it possible to fix it somehow?
Click to expand...
Click to collapse
you'd better try to check the screen connector
Related
Just got my unit today and love it.
Only notice a soft sparkle (like when you splash water on any LCD screen) but it's very soft and only noticeable at certain angle.
quick call to friend who has HD2, same problem.
anyone else have that problem ?
it is not a problem, it's how this capacitive display is built. at certain angle You will also notice a grid of lines and tiny dots.
sg10 said:
Just got my unit today and love it.
Only notice a soft sparkle (like when you splash water on any LCD screen) but it's very soft and only noticeable at certain angle.
quick call to friend who has HD2, same problem.
anyone else have that problem ?
Click to expand...
Click to collapse
It sounds to me like you've noticed the grid in the screen. This is part of the capacitive screen design, and not a fault or issue. It's there on everyone's phone, but as you've obviously seen, it's so unnoticable normally that you just forget about it.
Is it that, or something else?
Edit:
Or you could you read the post above
just curious, how come I didn't notice it on iphone ? lower screen resolution + smaller screen ?
sg10 said:
just curious, how come I didn't notice it on iphone ? lower screen resolution + smaller screen ?
Click to expand...
Click to collapse
I couldn't say why you didn't notice it, but it is there.
Hi,
i set my background to something light green recently and noticed that my HD2 display shows many small, yet annoying interference lines going through my screen horizontally.
I noticed this before on the orange "Windows Phone" boot screen, so maybe someone could check if it's normal.
Please boot your phone and when the orange Windows Phone screen pops up look carefully/closely whether you can see (light) interference in form of horizontal lines wandering up and down your screen. Need to know whether my device is broken or whether it's normal behavior.
Thanks.
firaX said:
Need to know whether my device is broken or whether it's normal behavior.
Thanks.
Click to expand...
Click to collapse
your device is ok...
All HD2s has this problem (I'm not sure that this is a problem)
I notice this on LCD TVs, too...It's when cables are badly shielded...My Kaiser def. does NOT have this issue! It's not visible on default config - but once you change your wallpaper to something yellow/green/orange/red it starts to annoy you :/
Could anyone else test this and tell me if they see light interference lines on the orange Windows Phone bootscreen (when looking very closely).
Kind of looks like this, but not as bad:
http://www.youtube.com/watch?v=UvPt7BLMHSI
Screen shows horizontal lines wandering on light colors - Plea
firaX said:
Could anyone else test this and tell me if they see light interference lines on the orange Windows Phone bootscreen (when looking very closely).
Kind of looks like this, but not as bad:
I have the same and it is annoying, what can we do?
Click to expand...
Click to collapse
ive only ever seen this on the email tab.......
my home screen is white and it doesn't happen there or on the startup screen.....
demon-resident said:
your device is ok...
All HD2s has this problem (I'm not sure that this is a problem)
Click to expand...
Click to collapse
My HD2 dont...
I think I had this problem after hspl and roming
wrong thread. deleted
Hello, I change the screen to my Z and I have this problem.
I noticed the screen flicker when you touch or press the edges of the screen / phone. It's like if you increase the intensity of light.
The display properly reacts to the pressure of the fingers, sliding screen keyboard ...
What can happen? The screen? I open it?
The 2 Connectors of the screen with the board?
Thanks
are you using auto light? if yes try to disable it
I'm guessing it's an issue with the connections. Are you using too much pressure on the screen? I've never seen that happen on mine.
PazzoPazzini said:
are you using auto light? if yes try to disable it
Click to expand...
Click to collapse
Nooo
shadowx360 said:
I'm guessing it's an issue with the connections. Are you using too much pressure on the screen? I've never seen that happen on mine.
Click to expand...
Click to collapse
I think this is, I will dismantle it and see what happens.
Repair fail !!
Well I'm back to open the Z and I've broken the screen.
I get those lines and a black spot. 25 euros lost.
I hope it's only the screen and the digitizer.
this happened to me now i cant get anything but the lowest brightness
if you have the same as me its not the screen i think its the cable but i cant find a cheap replacement to test it plus i am thinking of going to the droid 4 if/when it gets its gsm update
Did you manage to fix the problem with your Desire Z screen, I had exactly the same problem after replacing the LCD. I took it apart and put it back together again & again but couldn't find what was causing it.
I think when you take the screen out the first time, you remove that clear glue stuff, and probably make it slightly loose. So what I did was take some of them sticky labels for printing. With a scalpel cut some very thin strips (about 2mm in width and almost the full length of each side), folded them into an L shape and stuck them aroud the 3 edges of the LCD, before sinking it into the housing and the problem is fixed.
Just in case I've not explained that very well, here is a really bad diagram.
...John...
http://forum.xda-developers.com/showpost.php?p=28506002&postcount=7
Repared
Merci all
I have just replaced my samsung galaxy s4 screen lcd and digitalizer. When i boot up the phone the screen has an yellowish white tone.
When i plug out the bottom buttons and the charger cord inside the phone, from the main board. The yellowish screen goes away, and i get a nice white toned screen.
Is this a hardware or software problem?
Does anyone have a clue how to fix it? any sort of contribution would help!
Sorry for bad english, it is not my native language
What happens when you connect the old lcd?
Lennyz1988 said:
What happens when you connect the old lcd?
Click to expand...
Click to collapse
Well, the reason i switched lcd was because it broke down when i droped my phone on the floor, so that one doesnt show anything...
I can see my background picture in behind, when the screen gets yellow and i open an app. the phone is also rooted
i have broken my screen (touch amoled, all the screen) and i bought another one from ebay
looks original and arrived in a samsung service pack box
this new display have something strange in colors when the backlight is low, looks like...don't know how to explain but the colors are not perfect as they were with the factory screen...somehow a little bit green (always when light is low)
anyway sometimes now, like one time every week, after i while i'm using it, the screen go crazy and when i touch it, i see (developer, show touch dots) random touch around my fingers
some days ago this problem happened when i was in a call, me and my interlocutor, we heard a strange noise like bzzzzzrbrbzbrbrbzzzz when i was touching the screen, so there was the touch crazy problem and some strange noise when i was touching the screen
a reboot and everything is ok for some day....
i hope you had understood my poor english
opinions? what can i do? :crying:
ps. i have a 9506
It's probably a fake screen. That would explain your color problem and touch problem.
Pwnycorn said:
It's probably a fake screen. That would explain your color problem and touch problem.
Click to expand...
Click to collapse
the screen resolution is correct and with high backlight the colors are perfect, looks like original on the front and on the back
how to check if it's fake?