So today I decided to root my g1 so I could get Android 1.5 I downloaded the DREAIMG.nbh file over wi-fi and shut off my phone and went into the bootloader. When I press the Red end button to update the bar begins to progress and when it is finished I get the following message
DREAIMG.nbh FAIL
BOOTLOADER
RECOVERY
BOOT
SPLASH1
SYSTEM
USERDATA RADIO_v2
update terminate
Update fail
Now I'm stuck in bootloader with the screen with the three colored bands (red green blue)
It says
DREA100 PVT 32B RUUNBH
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.14.11
Sep 2 2008
Serial0
I am unable to get out of this screen. I removed the battery, put it back in and tried a factory reset. It went straight to the bootloader. My next idea was to go here or google an answer and I found some users with similar problems but I am NOT a developer so I could not understand anything that was being said. Can someone tell me how to get out of this in layman's terms?
try redownloading dreaming from a pc to your sd card via a micro sd card reader. if dont one have go to best buy or whatever is close and get one. then try loading it the same way as you did before and make sure your phone is good and charged. make sense?
Ugh. I received a MT3g from a person on Ebay who said the phone was stuck in a loop. Thought I could easily fix it but this #@#! phone is drivin me crazy!
As soon as I turn the device on it goes straight to HBOOT with the following information:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.006 ( SAPP30000 )
CPLD - 10
RADIO - 2.22.19.261
May 27 2009, 19:06:41
HBOOT
<Back> Fastboot Mode
Hitting the "back" button does nothing, and therefore cant get into Fastboot. I have tried putting the original sappimg.nbh on there..and it starts updating everything with the bar on the top right corner. Everything says its successful, but when it reboots it goes straight back to the HBOOT. I also tried putting the sappimg.zip on there, and when updating I get a "Model ID Incorrect Update Failed" error. The sappimg.zip files that are on one of these threads is for rooting the MT3g right? I have the perfected SPL as u can see, but as of now I just want a working rom...dnt care if its stock. Like i said, loading sappimg.nbh seems to load everything, but goes right back to the 3 Anroids on skateboards.
Did you try installed the SDK onto your computer and running commands to maybe boot up a the RAv recovery image?
The maybe from there you can flash the phone.
Yea I already have the SDK...I should have stated I'm no Android noob..just a Mytouch one. But this baffles me. I cant access Fastboot because the "back" button does nothing, thus it cant connect to my computer. However I can flash images on it by placing the .nbh or sappimg.zip on them..but like i said, i get an error with the .zip and the .nbh seems to update fine but still brings me to the Hboot screen.
So i bought a broken G1 on ebay. The person said they could not downgrade to RC29 so I figured it would be an easy fix.
I turn on the phone and it loads up perfectly. I get to the screen that says "No SIM Card" and then I need his email and password to get passed this which I don't have. I hold HOME + POWER and it goes to the multi-color bootloader. I then try CAMERA + POWER and it loads the bootloader. I put the DREAIMG.nbh file on my FAT32 SD Card (MD5 is correct) then I get this screen/error.
Now whenever I try to power on the phone it goes straight to the bootloader but now I have the RUUNBH flag. Here is what I see
Code:
DREA100 PVT 32B RUUNBH
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26i
SEP 2 2008
I think you need to reflash the spl (RUUNBH). Then flash the rest, look up the fastboot commands to make it a little eaiser.
But because it fails at the recovery, grab a new recovery image and flash that with fastboot.
I cannot get into fastboot. I see the Serial0 screen but nothing happens when I push 'back'
I had this problem before and the device was inactive for 4 months. Then it suddenly started working again. This problem has resurfaced and I cannot find a solution.
As soon as I turn the device on it goes straight to HBOOT with the following information:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.006 ( SAPP30000 )
CPLD - 10
RADIO - 2.22.19.261
May 27 2009, 19:06:41
HBOOT
<Back> Fastboot Mode
it runs through what appears to be a booting process but then nothing. no buttons do any thing and it is unresponsive. Can anyone help me remedy this?
maybe a button is stuck down or is making contact (like your vol down?) and when you boot up it keeps thinking you want to go into hboot (cause of a false msg coming from the hardware) I dunno just my random blurb of the day.
i've got the same problem with a g1 right now i can boot into the recovery img with home+power i tired taking out the camera button and trying that but still boots into bootloader
Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.
Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk
hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol
5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk
But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.
those all sound like bricks..
problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.
huahua!!!!
No one post about my problem...