Hi i've installed Build H.6.1-38-1 for Retail Europe to my motorola 2 days ago, everything seems to be okey, i got few updates, now i'm running HONEYCOMB 3.2 , But PROBLEM IS MY MTOROROLA SHOWS NOW internal MEMORY CAPACITY ONLY 4.11 GB??? instead of about 28 gb, does anyone know.. WHY????
Someone more knowledgeable will come along I am sure - but I 'think' some models had a different arrangement for the flash drives, so flashing these roms makes your Xoom THINK it has less memory than it really does I believe.
motorolq mz601
I am a bit confused its tablet motorola xoom, i really need help.. how to get proper internal storage... my tablet is not rooted yet.
Can anyone help, to solve this problem?????????????? please....
margee82 said:
Can anyone help, to solve this problem?????????????? please....
Click to expand...
Click to collapse
See my response to your other post. If Hong Kong Xoom, there is a solution.
motorolq mz601
Thank you, but i have never tried to root it. What do I need to do? Does everything work? And will i get all languages. It is from china, but i flashed to ild H.6.1-38-1 for Retail Europe MD5 Sum: 20b6338449a02cf271356c47d642e0db UK, Greece, Romania, Sweden, Norway, Denmark, Netherlands, Spain, Austria, Switzerland, Poland, Hungary, Croatia, Italy, Ireland ... will u help me, step by step.. please??????
if all else fail, factory reset might be the way to go...
I have replied to your pm.
Related
Hi All,
Has anyone managed to purchase the phone in Dubai or UAE? Despite Samsung launching the phone here in May, they still haven't made it available for purchase in the shops. According to Samsung's help line, they're having problems with Arabic on the phone. This means that it won't be available until the 15th of July.
I don't need Arabic however. Anyone find it in a shop here?
Cheers,
A.
I heard that it is available at Axiom retail stores in UAE, if not then try Expansys.ae
bought mine in Dubai from Axiom in ibn battuta AED 2,699 for 16 GB
Enjoy
n646464 said:
bought mine in Dubai from Axiom in ibn battuta AED 2,699 for 16 GB
Enjoy
Click to expand...
Click to collapse
Does it support arabic?
if yes
what is the version of PDA,Phone,csc? (when you dail *#1234#)
can you dump the rom?
thank you
Thanks for the information, just bought mine from Axiom in DFC. It's amazing that no one else has them in stock - including Samsung!
miso1391 said:
Does it support arabic?
if yes
what is the version of PDA,Phone,csc? (when you dail *#1234#)
can you dump the rom?
thank you
Click to expand...
Click to collapse
This is the Rom version
PDA:I9000JPJF4
PHONE:I9000JXJF1
CSC:I9000OJPJF4
sadly i have done the stupid mistake of flashing madaco rom as soon as i got it so can dump...I do not know how to dump it either. Can some on dump this version please i need back.
I supports arabic text fully....
It seems we can not download the firmwares from moto server right now.
Here are UK, Italy, and French firmwares for downloads.
Flash with RSD Lite 4.6+.
UK download here
Italy: download here
French: download here.(Sorry make a mistake on the name).
Central European: download here
For Southeast Asian and Singapore ones, I will upload them to a Chinese website for my easy upload. Time limited for the 2 firmwares.
Singapore
or see post #11
Post #42
Southeast Asian
US Carriers ones: see post #3
German one: see post #4
Russian one: see post #15 (p.s.: russian not arabian)
P.S.:
1. If you have no language requirement, just download the UK one.
2. UK, Singapore, southeast asia, US, central europe version are nearly the same, no much difference. Of course, some ones are of 550Hz.
it is the same. only difference is the branding logo on them
Just so we have these all in 1 thread, here are some US ones:
R-D said:
Found a copy of the Cincinati Bell SBF file STR_U2_04.1E.1_SIGNED_USASHLSTAB14P2XAPCNCBW039.0R_NACBW_P011_A006_HWp3_1FF.sbf.gz
I have uploaded it here:
http://www.sendspace.com/file/qyu2pi
I could not locate a copy of the BrightPoint file, maybe if someone has that one they can upload it somewhere.
Click to expand...
Click to collapse
and
Iced27 said:
Uploading right now, check back in a few for the link.
US BrightPoint sbf: http://www.megaupload.com/?d=CKP5H4V6
Click to expand...
Click to collapse
I just uploaded the GERMAN ROM:
http://www.load.to/6ydeF5JIEM/UNMOD...0R_UCASHOTBRTLRTCEE_P001_A008_HWp3_1FF.sbf.gz
free hoster - full speed for everyone
please.upload the asian rom as i got issues with the uk rom (sms sending issues)
pritesh_100_in said:
please.upload the asian rom as i got issues with the uk rom (sms sending issues)
Click to expand...
Click to collapse
Usually that is not the problem of firmware.
Thank You!
I was stuck on Korean Rom, in which my phones sensors wernt functioning and it over all it was hell to use. Motorola's website was down and I couldnt find the ROMs anywhere. Just wanted to Thank You guys, made my day. Good to have my phone back
Nice one. However, how do i download the singapore ROM? Not everyone in Singapore are chinese
Thanks You Saved my life
Does anyone have the WIND Mobile Canada firmware?
Re-uploaded to my Dropbox
Singapore Rom
Hello,
Thanks very much for your uploads , do you have the Arab version ?
STR_U2_03.20.0
I really need this one , anyone can help me have it ?
Regards
no. I downloaded arabian and russian ones before. but they donot support chinese well. I deleted them from my disk. no copies now.
Sent from my XT720 using XDA App
I can't find the arabia version anywhere and the link is not working. could you please tell me where I can download it directly? or if it's on some sharing site?
thanks,
Hello guys,
Here is the russian-arabian rom.
http://www.4shared.com/file/1zvsNCAc/STR_U2_03201_SIGNED_UCASHLSTAB.html
quad band us rom?
I have a milestone xt720 and after flashing the UK rom I can no longer connect to at&t 3g. All of the firmware links i can find support bands other then 850. I can make call presumably on the 1900 band and get an edge connection but no 3g. If anyone has the firmware that i need please post or advise. I feel like this hardware is wasted with a crappy edge connection. Thanks.
thanks me cellphone greek ,me from argentina , firmware use ?
philodox said:
Does anyone have the WIND Mobile Canada firmware?
Click to expand...
Click to collapse
Just flash the US BrightPoint sbf for Wind Mobile as I can confirm it works just fine. Just remember to set your APN's again after flashing.
Thanks guys, made my day
Sent from my Milestone XT720 using XDA App
post deleted....
Okay, so I bought the Huawei X1 phone, which is a great little phone.
But, it wasn't long before I started to tinker with it, and in the process I lost the stock Telecom rom and ended up having to flash with an Aussie version.
The problem I'm having though, is that nearly all roms I've found so far will not register properly on the network, and as far as I found out, it's because these all came from 900mhz providers and not the 850mhz like XT.
So heres what I would like somone to do f they are keen enough...
Use SuperOneClick to root their phone.
Install RootToolBox.
Flash with recovery-RA-u8160-v2.3 (you may need a file manager like ES file manager)
Power off then on holding both power button and volume up until recovery menu comes up.
Perform a nand backup of boot, system, and data and then...
Please please please upload the files somewhere for me!
Thanks.
Or if anyone has the U8180 Telecom New Zealand rom, can you please upload?
I've tried getting it from wiki.modaco.com Huawei_Firmware_U8180
But none of the links work, or I can't figure out how to get them working.
You've got the wrong forum mate...This forum section is for U8800 - X5 and what you've got is Huawei Ideos X1 - U8180.
Yeah I know, but for some reason I can't find the right forum?
Able to point me in right direction?
You owe me a beer for this
http://androidz.jimdo.com/roms-x1-u8180/roms-u8180-x1-gaga/#.Tlrayl34K08
Not really mate, those roms are the reason my phone is now stuck on the 900mhz version baseband and not the 850mhz version like I need for telecom.
I'm desperate for the NZ telecom version!
Ups, sorry mate, wasn't aware that NZ is 850mhz.
Can you not change the baseband in *#*#4636#*#* menu?
lukensteinz said:
Not really mate, those roms are the reason my phone is now stuck on the 900mhz version baseband and not the 850mhz version like I need for telecom.
I'm desperate for the NZ telecom version!
Click to expand...
Click to collapse
You are confused, the baseband has nothing to do with the 3G frequency, you cannot change a frequency because it is in the hardware not software.
My question is: did it worked before the update? (im assuming that you are talking about 3G frequency bands)
Sent from my U8800Pro using XDA App
Oh I guess I am confused?
Yes it did work before the update.
And no I don't see an option to change anything in the menu.
How would I go about repairing this?
Maybe contact Huawei NZ? via http://huaweimobile.co.nz
I tried that yesterday.
Got some angry little asian man who wanted to know how I flashed the phone and was no help at all
Noticed before that the phone model isn't actually U8180, but rather U8180-7...
I'm guessing there may be a hardware change for NZ?
Can anybody point me to more info on basebands and whatnot?
I don't really understand it all, I was under the impression that baseband=operating frequencies?
Why don't you take it back to Telecom shop and see if they can flash it back? I doubt you'll have much luck on this forum as it's for a totally different phone that runs on only 2D and Vodafone in NZ
you'd be fine if the Huawei links weren't broken, all the links I've tried for multiple models are broken. Keep an eye on them they might come right soon.
Flashed it with U8150 firmware for a laugh, going back to shop today :S
hey there -
I've got the U8180-7 NZ Telecom version if you want - uploading it now to mediafire and will post it in a bit.
Will you return the favor ? I need to purchase a couple of these phones in NZ and have them shipped out to me. But haven't found a way to do that yet.. nobody seems to want to ship overseas or even have DHL pick on my expense from their shop..
rgds,
pirh
Update: seems I can't yet post outside links.. PM me for the link
Hey Luke, check out geekzone:
http://www.geekzone.co.nz/forums.asp?forumid=97&topicid=90028
They have been working on CM7 for the telecom x1 so maybe their port will work
pirh said:
hey there -
I've got the U8180-7 NZ Telecom version if you want - uploading it now to mediafire and will post it in a bit.
Will you return the favor ? I need to purchase a couple of these phones in NZ and have them shipped out to me. But haven't found a way to do that yet.. nobody seems to want to ship overseas or even have DHL pick on my expense from their shop..
rgds,
pirh
Update: seems I can't yet post outside links.. PM me for the link
Click to expand...
Click to collapse
Hey do you still have the U8180-7 NZ Telecom version rom, I need it as I have done the same thing haha, can't find the correct one anywhere -.-
Dear all,
today I finally found time to flash my Defy+ with using this Thread. This was my first flashing, but I done all the reading and I think it went as it should.
Now my Defy is acting strange:
Now I have poor signal
Now I often lose signal in areas where it was very strong before (at home)
In calls incoming voice is breaking, thus they hear me clearly
Although I wiped data and cache when Defy+ booted for the first time I got my old wall paper back and some Icons were in the same place as before flashing.
Thanks in advance and please help, if you know what went wrong.
pe3c.si said:
Dear all,
today I finally found time to flash my Defy+ with using this Thread. This was my first flashing, but I done all the reading and I think it went as it should.
Now my Defy is acting strange:
Now I have poor signal
Now I often lose signal in areas where it was very strong before (at home)
In calls incoming voice is breaking, thus they hear me clearly
Although I wiped data and cache when Defy+ booted for the first time I got my old wall paper back and some Icons were in the same place as before flashing.
Thanks in advance and please help, if you know what went wrong.
Click to expand...
Click to collapse
Did you try switching baseband? If not, try it.
nsm1234 said:
Did you try switching baseband? If not, try it.
Click to expand...
Click to collapse
No I haven't. Should I use this one?
Hi there, in the mean time I've installed and Baseband Switcher v4.1. I have selected EMEA/Central Europe Hong Kong, Taiwan, Arabia, France, Nordic 3.5.x United Kingdom 4.5.1-85.
I assume this should be OK for me as I come from Slovenia.
pe3c.si said:
Hi there, in the mean time I've installed and Baseband Switcher v4.1. I have selected EMEA/Central Europe Hong Kong, Taiwan, Arabia, France, Nordic 3.5.x United Kingdom 4.5.1-85.
I assume this should be OK for me as I come from Slovenia.
Click to expand...
Click to collapse
That's all what u needed to do.
pe3c.si said:
Hi there, in the mean time I've installed and Baseband Switcher v4.1. I have selected EMEA/Central Europe Hong Kong, Taiwan, Arabia, France, Nordic 3.5.x United Kingdom 4.5.1-85.
I assume this should be OK for me as I come from Slovenia.
Click to expand...
Click to collapse
If that baseband works fine without problems, nothing more to be done.
Hi Guys!
Just figured out that p6800 was imported from the UAE to the UK where i got it from. The bother is is that i need German on Swype as im living in Frankfurt now. It's not an option on it at the moment.
So...is there a general XEU csc for this baby? I can't seem to find one... If there isn't, whats a good one to get with German on Swype, and id like it to be at the forefront of the update chain... i think that the UAE updates will probably be behind european 7.7's...
Any ideas?
Thanks All.
Still looking it is out but cant find a copy anywhere . Have french on mine at moment xef.