[Q] Rooting my T-Mobile G2 with Ubuntu - G2 and Desire Z General

First of all, I have the T-Mobile G2 with the Gingerbread OTA update. I am running Ubuntu 11.10 on a netbook. I have tried to follow the instructions for rooting my phone, but I am getting stuck trying to install the Google USB driver in the SDK manager. Any suggestions on how to get past this roadblock?

mrfilbert said:
First of all, I have the T-Mobile G2 with the Gingerbread OTA update. I am running Ubuntu 11.10 on a netbook. I have tried to follow the instructions for rooting my phone, but I am getting stuck trying to install the Google USB driver in the SDK manager. Any suggestions on how to get past this roadblock?
Click to expand...
Click to collapse
no need for usb drivers in linux
you have to be sure that you are su on your pc... (i have fedora)
i think ubunto it´s sudo, isn´t it?
and before you can see your device through adb you have to type "./adb kill-server" and then "./adb start-server"
... then "./adb devices" and so on

Thanks. I tried ./adb devices and it gave me the following:
List of devices attached
???????????? no permissions
???????????? no permissions
Since I do not see a serial number, do I need to re-install something?

mrfilbert said:
Thanks. I tried ./adb devices and it gave me the following:
List of devices attached
???????????? no permissions
???????????? no permissions
Since I do not see a serial number, do I need to re-install something?
Click to expand...
Click to collapse
no that happens because you are not root on your pc...
in fedora i have to do the following to see my device:
su (enter)
then enter password
i get this symbol: # = means i´m root on my pc
then i go to my platform-tools directory (cd whatever)
./adb kill-server
./adb start-server
./adb devices ...now you should see your device
then start the rooting procedure, good luck

Use 'sudo su' in ubuntu to get a root prompt.
otherwise you have to set a 51-android.rules file (instructions here http://developer.android.com/guide/developing/device.html)
-Nipqer

Related

How to make adb work?

I've searched a lot, but did not find a solution.
When I connect my HTC Kaiser with Android Ion 1.5 on the top to my Linux box (all UDEV settings are as recommended), the adb utility (launched as root) does not recognize it correctly. It shows a set of questionmarks instead of the device name:
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? device
adb basic commands (pull/push/install/shell) work, though, but DDMS does not work and I can't debug my application when the device is attached.
Does somebody have a solution?
You need to run the adb server as root. Use su or sudo to run these:
Code:
./adb kill-server
./adb start-server
You can then use adb and ddms as a normal user. If you use fastboot, you may find you need to run that as root as well.
it is root
Super Jamie said:
You need to run the adb server as root. Use su or sudo to run these:
Code:
./adb kill-server
./adb start-server
You can then use adb and ddms as a normal user. If you use fastboot, you may find you need to run that as root as well.
Click to expand...
Click to collapse
Like I mentioned in my question - I do run adb as root.
When it's launched not as root, I can not even do "adb shell" and
"adb devices" shows:
"????????????? Permission denied". So, it is root, I assure.
BTW, on my work Windows 2k3 machine I can use ddms, but
"adb devices" still shows some garbage letters instead of the device name.
Sorry for my English, if my explanation is not clear.

[Guide] ADB with Galaxy S in Ubuntu *Updated 9-10-10*

I still see a lot of people having trouble with ADB in ubuntu, so here is quick guide for anyone still having trouble.
The guide is located HERE and also can be viewed on post #12
*Updated 9-10-10* Thanks to xipher_zero for his very quick and easy guide (Much better than my original).
Hope this helps some people having issues.
If I install unbuntu it overrides my win7 correct?
Sent from my SGH-T959 using XDA App
Oh my!! I've been searched for this guide for a long time Thanks you so much MR.the3dman
Wykedx
Oh boy... where to get started. You could install Ubuntu without overwriting your W7 installation. Then you would "dual boot" your computer. As it boots up, you choose which OS to load. Or of course you could install Ubuntu on a computer by itself.
You don't need to install Ubuntu just to use ADB. ADB runs on both Win and Linux. What is it that you are trying to do? If you just want to learn linux, then make yourself a live CD and you won't have to worry about overwriting any operating systems.
But this is not a linux forum. If this is something that you are interested in, then google is your friend.
if you are interested in trying ubuntu, you might check this out: http://wubi-installer.org/. or just run a LiveCD, as already suggested.
Do you happen to have a HTC??
My output of lsusb:
Code:
Bus 002 Device 002: ID 04e8:681d Samsung Electronics Co., Ltd
Shouldn't /etc/udev/rules.d/51-android.rules contain 04e8 instead of 0bb4?
And no, even that didn't help me. I'm on Ubuntu Lucid Lynx 64 bit.
fantasyzer said:
Do you happen to have a HTC??
My output of lsusb:
Code:
Bus 002 Device 002: ID 04e8:681d Samsung Electronics Co., Ltd
Shouldn't /etc/udev/rules.d/51-android.rules contain 04e8 instead of 0bb4?
And no, even that didn't help me. I'm on Ubuntu Lucid Lynx 64 bit.
Click to expand...
Click to collapse
Thanks for noticing that! I have updated the rules with the correct ones. I have an htc also and uploaded the wrong rules. I am also on Ubuntu Lucid 64 bit and this is what worked for me. I also have done this on my netbook which runs 9.10 so I am really not sure what the issue is then. Did you use ADB from the sdk or from the app inventor adb in the guide?
If I read correctly when browsing for this topic, your instruction is to drop in these rule files, and then run adb using sudo
When using sudo to run adb, it'll always work, regardless of what's in your rules file
If you have your rules file correct, you don't need to do sudo adb
Just adb will work fine
animefans said:
If I read correctly when browsing for this topic, your instruction is to drop in these rule files, and then run adb using sudo
When using sudo to run adb, it'll always work, regardless of what's in your rules file
If you have your rules file correct, you don't need to do sudo adb
Just adb will work fine
Click to expand...
Click to collapse
I did try this, I removed my rules and reloaded my udev folder then tried adb with sudo and it was a no go (I get nothing listed under the list of devices). Also the only way I could get adb to recognize anything without sudo was by adding a line in the rules making my user as the owner, but even still without sudo under devices I get ???????????? no permissions. With sudo and the rules everything works fine which is why I wrote the guide that way.
If you don't want to run ADB as root you can follow the steps in this post
http://forum.xda-developers.com/showpost.php?p=7282335&postcount=4 - FOR SAMSUNG ONLY DEVICES!!!
after you installed SDK.
I also have adb in my path so I do not have to be in the tools directory, and can execute it from anywhere
In my .bashrc file (if you are using bash shell)
Code:
export PATH=$PATH:/path/to/android-sdk/tools
Thanks the3dman for the guide. Unfortunately I am still having problems as when I run the sudo ./adb devices nothing is listed. I followed the directions step by step and also confirmed my Vibrant is in debug mode (also confirms on the phone it is in debug mode when connected via usb. I even rebooted everything again, double checked everything and still no devices listed. I am running Ubuntu 10.04 Any ideas? Thanks so much!
-mG
Four Step ADB installation in Ubuntu
Here is a simple guide without using custom debs:
1. Download the SDK:
wget dl.google.com/android/android-sdk_r07-linux_x86.tgz
2. Extract the archive to the current directory and move into the extracted directory.
tar xvfz android-sdk_r07-linux_x86.tgz && cd android-sdk-linux_x86
3. Move the "tools" folder to your local system folder:
sudo mv tools /usr/local/share/android-tools
4. Create a symbolic link to the adb executable:
sudo ln -s /usr/local/share/android-tools/adb /usr/local/bin/
Done!
from a terminal type:
sudo adb devices (This will start the server and search for connected devices)
Are you running Ubuntu 64bit? If so you need to make sure that you have the 32bit compatibility libraries installed. From the command line run the following:
sudo apt-get install ia32-libs
This will allow you to run 32bit apps in 32bit mode. Not sure if this is whats causing your issue, but it might be worth a shot.
xipher_zero: Thank you, I followed your steps and it is working now.
Oh, I am running 32bit Ubuntu so that was not the problem.
lqaddict said:
If you don't want to run ADB as root you can follow the steps in this post
http://forum.xda-developers.com/showpost.php?p=7282335&postcount=4 - FOR SAMSUNG ONLY DEVICES!!!
after you installed SDK.
I also have adb in my path so I do not have to be in the tools directory, and can execute it from anywhere
In my .bashrc file (if you are using bash shell)
Code:
export PATH=$PATH:/path/to/android-sdk/tools
Click to expand...
Click to collapse
This is not working for some people that is what is being figured out. I am in the process of updating my guide and the new and better one should be up shortly.
xipher_zero said:
Here is a simple guide without using custom debs:
1. Download the SDK:
wget dl.google.com/android/android-sdk_r07-linux_x86.tgz
2. Extract the archive to the current directory and move into the extracted directory.
tar xvfz android-sdk_r07-linux_x86.tgz && cd android-sdk-linux_x86
3. Move the "tools" folder to your local system folder:
sudo mv tools /usr/local/share/android-tools
4. Create a symbolic link to the adb executable:
sudo ln -s /usr/local/share/android-tools/adb /usr/local/bin/
Done!
from a terminal type:
sudo adb devices (This will start the server and search for connected devices)
Click to expand...
Click to collapse
This version worked well also! Thanks its much shorter and easier than my method.
MrGibbage said:
Wykedx
Oh boy... where to get started. You could install Ubuntu without overwriting your W7 installation. Then you would "dual boot" your computer. As it boots up, you choose which OS to load. Or of course you could install Ubuntu on a computer by itself.
You don't need to install Ubuntu just to use ADB. ADB runs on both Win and Linux. What is it that you are trying to do? If you just want to learn linux, then make yourself a live CD and you won't have to worry about overwriting any operating systems.
But this is not a linux forum. If this is something that you are interested in, then google is your friend.
Click to expand...
Click to collapse
thanks for the response, and sorrry i didn't see this before lol,
what i am trying to do is be able to use adb, at the moment I can't seem to use it because my default.prop is not correct so i heard i have to use linux to be able to edit my default prop...when i try to adb push or remount i get permission denied and yet I have superuser permission and everything.
do you have to root your phone while being an administrator on the computer?
Wykedx said:
thanks for the response, and sorrry i didn't see this before lol,
what i am trying to do is be able to use adb, at the moment I can't seem to use it because my default.prop is not correct so i heard i have to use linux to be able to edit my default prop...when i try to adb push or remount i get permission denied and yet I have superuser permission and everything.
do you have to root your phone while being an administrator on the computer?
Click to expand...
Click to collapse
Try putting your phone in clockwork recovery then issuing the adb commands, and yes your phone has to be rooted.
Thanks for the excellent how to, however...
I've still got a problem:
after "sudo adb devices" (step 5) I always get this message:
List of devices attached
??????????? no permissions;
while "lsusb" gives me that:
Bus 002 Device 007: ID 04e8:681c Samsung Electronics Co., Ltd Galaxy Portal/Spica Android Phone
so how can I solve this?
(Kubuntu 10.10 is my current os)
RiverTam said:
I've still got a problem:
after "sudo adb devices" (step 5) I always get this message:
List of devices attached
??????????? no permissions;
while "lsusb" gives me that:
Bus 002 Device 007: ID 04e8:681c Samsung Electronics Co., Ltd Galaxy Portal/Spica Android Phone
so how can I solve this?
(Kubuntu 10.10 is my current os)
Click to expand...
Click to collapse
you'll need to edit a usb rule to "look" for the samsung phone. i forgot what file to edit and what to put in there, once i find the file, i'll post it from my laptop.
EDIT: lol, i found it.
http://forum.xda-developers.com/showpost.php?p=7343021&postcount=1

adb remount operation not permitted

Hey Guys,
I Clockwork3'd my Aria, but I wanted to update my sources (thread 730398) so I can get non market apps. When I follow the instructions in that post I get an error:
Code:
./adb remount
remount failed: operation not permitted
'adb devices' does show my Aria's SN, I'm su'd and I'm running in debug mode. I also chowned everything in the android sdk tools and its subdirectories.
Here's the question -
In searching, I found (thread 614645) that suggested ro.secure wasn't set properly, and sure enough if I do:
Code:
./adb shell
$ getprop ro.secure
1
$
Shouldn't applying clockwork have set that properly? Would the instructions at (thread 8041739 post 9 ) be the right steps to resolve this on an Aria?
Thanks!
PS - sorry I can't post direct links.
if you have all the drivers installed, it should work...
which OS are you using?? (Mac, Win7, etc)
dont rund SDK command in Clockwork, with phone on connect data cable and select "charge only" when asked.
the ./ command is used for Linux i think, i never got that command to work either. just go to the folder where SDK/Tools is located in CMD prompt or Terminal(depending on the OS) and run the following command:
adb remount
hope this helps a bit
I had a lot of issues with driver installs on Windows 7, so I'm doing this on a netbook with Ubuntu netbook remix. Also tried the reflash CD, similar issue.
Right, so with Ubuntu, and the cable my phone came with (have tried a few others just in case)
1. phone on and operational
2. plug in to laptop
3. phone gives happy USB connected and Charge Only notifications
4. fire up terminal window, and su
5. type ./adb remount
and I get the error above. If I do kill-server to refresh it, I get the demon starting successfully on port 5037.
Yeah, I was hoping I'd just missed something stupid. Should I need to modify the boot.img file outside of what Clockwork did?
My symptoms match those described in thread 685146 post #3, however, I've only applied Clockwork (which seems to work) not done anything else funky.
I have my windows 7 machine at the same point now -
adb remount gives 'remount failed: operation not permitted'
and
getprop ro.secure at the adb shell returns 1.
I think this means there's something wrong on the phone, if both machines act the same.
One other data point, I noticed the new Superuser Permissions app that installing clockwork gave me is asking to give superuser permissions to /system/bin/sh when I try to run the adb shell, but it doesn't trigger that when I do the adb remount.
Not sure what this means, any ideas most welcome - TIA!
steps here fixed it, thanks - http://forum.xda-developers.com/showthread.php?t=730398

[GUIDE] Root Kindle with 6.2.1 using JCase method

These are my notes and guide for rooting the Kindle with 6.2.1 firmware. If I left something out, or something is not working, please leave a comment and I'll try to update.
Credit goes to JCase for the root. Please consider making a donation to him here:
https://market.android.com/details?id=net.andirc.jcasedonate
Original procedure is here:
http://www.androidpolice.com/2011/1...on-kindle-regardless-of-its-software-version/
ADB INSTALL AND TEST - Method 1 (skip to the ROOT INSTALL section if you already have a working ADB)
NOTE: ADB = Android Debug Bridge. It is a command line interface to the android device. A working ADB is required before you can root your Kindle. ADB is installed on a PC and accesses the Kindle via USB cable.
Install Java SE Development Kit 7 on PC
The Android SDK Manager requires Java SDK
http://www.oracle.com/technetwork/java/javase/downloads/jdk-7u1-download-513651.html
Install Android SDK Manager on PC
The Android SDK has the drivers and ADB needed to perform the root procedure
http://developer.android.com/sdk/index.html
Uncheck Android 4.0
Check 2.33
Ensure Google USB Driver is checked
Install to c:\android to make typing easier later on
NOTE: The install can take a long time!
Manually update files so drivers will properly install
Open c:\users\your account name\.android\adb_usb.ini (or c:\documents and settings... if you have XP) and add the following
Code:
0x1949
Open c:\android\extras\google\usb_driver\android_winusb.inf and make additions as shown:
Code:
[Google.NTx86]
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
....
[Google.NTamd64]
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
Install drivers
Find the Kindle device in device manager and update drivers. Point to the location with android_winusb .inf
Verify ADB works
Open a command prompt
CD to c:\android\platform-tools
Code:
adb kill-server
adb devices
If it's working, ADB will return a large number, like this:
Code:
312342134231342 device
ADB INSTALL AND TEST - Method 2
NOTE: I have not tried this, but Vashypooh's app can apparently handle the driver install, and run ADB without installing the above software. If all of this works, then his app would be the best way IMO.
NOTE 2: I've seen a lot of comments suggesting the driver install in Vashypooh's app doesn't work at this point.
http://forum.xda-developers.com/showthread.php?t=1399889
ROOT INSTALL - Method 1
Install JCase's kindleroot_androidpolice.apk
JCase's app gives ADB root access. Once this is done, you still need to install the superuser app
Download kindleroot_androidpolice.apk to PC
http://www.multiupload.com/VNZ6Y41EQF
Ensure the Kindle is connected via USB, and copy file to Kindle sdcard
Using ES File Explorer on Kindle, navigate to the kindleroot_androidpolice.apk and launch
Follow prompts and click root
Install superuser app
Download superuser-2 to PC
http://www.multiupload.com/M2CX14W7Y0
Unzip to c:\download\sufiles
Use ADB to install SU app
Code:
adb root
adb remount
adb push c:\download\sufiles\su /system/xbin/su
adb shell chown 0.0 /system/xbin/su
adb shell chmod 06755 /system/xbin/su
adb install c:\download\sufiles\Superuser.apk
adb reboot
ROOT INSTALL - Method 2
NOTE: I have not tried this, but Vashypooh's app can apparently handle the root process.
BurritoRoot (Temporary)
Install Permanent Root with Superuser
http://forum.xda-developers.com/showthread.php?t=1399889
A+ instructions, wish I could write my own that good lol.
jcase said:
A+ instructions, wish I could write my own that good lol.
Click to expand...
Click to collapse
Thanks to you for the root. I hope the guide will help those trying to root!
Thanks for the clear and easy steps.
Great guide Ectoplasmic!
One thing I would add though, in step 5 "Verify ADB Works", before you use the "adb devices" command, you need to type "adb kill-server". If you don't type in "adb kill-server" first, the device won't show up when you use the "adb devices" command. Or at least it didn't for me.
Otherwise, everything worked FLAWLESSLY. I verified I was rooted using Root Checker. Thank you!
zopzop25 said:
Great guide Ectoplasmic!
One thing I would add though, in step 5 "Verify ADB Works", before you use the "adb devices" command, you need to type "adb kill-server". If you don't type in "adb kill-server" first, the device won't show up when you use the "adb devices" command. Or at least it didn't for me.
Otherwise, everything worked FLAWLESSLY. I verified I was rooted using Root Checker. Thank you!
Click to expand...
Click to collapse
Thanks, I added this to the guide.
Hi I use JCase method to root my 6.2.1 KF, then I need to unroot it so my kids can still enjoy the prime video, but I cannot. I try rootkeeper but failed. I also try the "kindleroot_androidpolice.apk" and click the unroot button, but it still cannot unroot. Pls help!
Get help in irc from jcase and vashypool theyll probably be able to help u
tkcctkcc said:
Hi I use JCase method to root my 6.2.1 KF, then I need to unroot it so my kids can still enjoy the prime video, but I cannot. I try rootkeeper but failed. I also try the "kindleroot_androidpolice.apk" and click the unroot button, but it still cannot unroot. Pls help!
Click to expand...
Click to collapse
Unroot in my app (BurritoRoot) does not remove su, it just turns off adb root (which is what my app turns on) sorry for the confusion.
Will add in the future when I release burritomod
Here's the equivalent instructions for Mac
I am pretty new myself, but I'm happy to share what I've come up with so far. I am on a Mac OS X 10.6.8
Download the Android SDK for Mac (dl.google.com/android/android-sdk_r16-macosx.zip), the easiest place to put it is at the top of your user directory, from the browser download window chose your username from places on the left side, then name the zip "Android"
Next from Finder, navigate to the place where you downloaded the SDK, and double-click on it which should unzip it and create a folder of the same name e.g "Android". Open that and inside it will be a folder "tools", and inside that there will be a file "android". Double-click that to run it and the "Android SDK Manager" program window will pop up, you will also see a Terminal window in the background, don't worry about that. Uncheck all the boxes, then check "Android SDK Platform-tools" which should be the third from the top, and click install. This gets you the actual "dab" program.
Once adb is setup, to get it to recognize your kindle fire on your mac, you may need to make an entry in a config file if you haven't already.
Start Terminal Applications > Utilities > Terminal or if you are used to using spotlight, simply type in "Terminal". (here's an intro to using Terminal guides.macrumors.com/Terminal) and navigate to the directory where you have adb, e.g. if you placed it at the top of your user directory that would be
Code:
cd Android
or if you left it in the default downloads directory it would be
Code:
cd Downloads/android-sdk-macosx/
then enter the following commands
Code:
mkdir ~/.android
You may get the following error
Code:
mkdir: /Users/<username>/.android: File exists
If so, that is fine, continue to the next step
Code:
touch ~/.android/adb_usb.ini
open -e ~/.android/adb_usb.ini
TextEdit will open with that file open, you should have an entry in it on a single line that says
Code:
0x1949
if not, copy that in, then save and close it, then
Code:
./adb kill-server
Connect your kindle to the mac if it isn't already, then
Code:
./adb devices
You should see a message like
Code:
List of devices attached
2ED6000600000001 device
On your kindle, make sure you have a file navigation app, the example above ES FileExplorer is excellent and is the one I use from Amazon app store
Download Burrito Root from Android Police ( androidpolice.com/2011/12/23/exclusive-how-to-easily-root-the-amazon-kindle-regardless-of-its-software-version/)
Also download the Superuser.zip from the same page (multiupload.com/ONH28CB1GU) and unzip, then make sure you move the contents "su" and "Superuser.apk" into the same directory as adb
Through Finder copy the "kindleroot_androidpolice.apk" file you downloaded earlier to your kindle, some place like "download" so you can find it easily later
Now on the Kindle, tap disconnect on your KIndle so you can get back to the apps screen, launch the file explorer you installed earlier, navigate to folder you copied it to, e.g. "download" then install the "kindleroot_androidpolice.apk", open it, and go through the steps to launch click "Root"
Back on the Mac, in the terminal window where you had adb going, enter the commands
Code:
./adb root
./adb remount
./adb push su /system/xbin/su
./adb shell chown 0.0 /system/xbin/su
./adb shell chmod 06755 /system/xbin/su
./adb install Superuser.apk
./adb reboot
You should be rooted now, then you can follow the other instructions out there for getting Android market, etc working
TIP
here's a tip if you don't want to have to type in the period and slash ahead of adb every time. from your terminal window enter the
Code:
cd ~
touch .profile
open -e .profile
That will open text editor, and paste in the following line,
Code:
PATH=${PATH}:/Users/<username>/<sdk-directory>/platform-tools
replacing both our user name and the path to where you have sdk e.g. in my case
Code:
PATH=${PATH}:/Users/kbiz/Android/platform-tools
Then close the terminal window and reopen a new one and you should be good to go, now you'll only need to type in "adb".
Let me know if I missed something, trying to give back since this forum has been super helpful.
---------- Post added at 01:04 AM ---------- Previous post was at 12:58 AM ----------
tkcctkcc said:
Hi I use JCase method to root my 6.2.1 KF, then I need to unroot it so my kids can still enjoy the prime video, but I cannot. I try rootkeeper but failed. I also try the "kindleroot_androidpolice.apk" and click the unroot button, but it still cannot unroot. Pls help!
Click to expand...
Click to collapse
OTA Rootkeeper should work but since its not, try this (courtesy rootkindlefire.com/kindle-fire-unroot/how-to-unroot-kindle-fire/)
Code:
adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
rm /system/app/Superuser.apk
rm /system/xbin/su
reboot
after your Kindle restarts you won't have root and Amazon Video should work just fine.
Hello,
I have successfully rooted my device with the above instructions. While installing the Android market I was abusing of my root privileges and I've successfully "burned" my device. That is, the Kindle won't start up anymore (it stays forever in the initial phase showing the kindleFire logo).
I don't know where else to turn for help so I'm writing about this here. If anyone has hints of how I could recover my kindle from the void, please let me know
Cheers
http://forum.xda-developers.com/showthread.php?t=1356257
Yesssssssssss
Yesssssssssssssssssss. So nice to have root again. My Titanium Backup and SUFBS works again
I had ADB and SDK working when I had my Glacier, but since I have gotten my SGS2, and my Kindle, Android SDK Manager will not open... It just opens a command prompt, and then closes.. I have reinstalled both the SDK Manager and the Java Kit... Any ideas?
EDIT:
I must have messed with something in my system settings somewhere to corrupt a bunch of stuff... I did a system restore to the 18th of December, reinstalled, and everything works perfect now... Oh well! Haha
Hey, I used a combo of the link JCase gave me when I had questions, this guide, and the links off the rootzwiki guide and managed to get it first try. It was actually easier than I thought it was going to be. I've never rooted anything before, I didn't even have ADB or the SDK until tonight. The process (while using both guides and video tut) went smoothly without a hitch. I just finished installing the Android Market but have to wait til morning to access it, as I have no WiFi at home, and its too late for me to be driving to a hotspot. Thank you very much. You(JCase) and your comrades who put this all together f**king rule.
a really clear and easy guide ! - congratulations - you shoud try to let it pin on top !
Ectoplasmic said:
NOTE 2: I've seen a lot of comments suggesting the driver install in Vashypooh's app doesn't work at this point.
Click to expand...
Click to collapse
the reason people have problems with vashipooh's driver installation seems to be the old drivers - they don't manage to clean up the old drivers:
disconnect KF
Open an (elevated for win7) command prompt:
set devmgr_show_nonpresent_devices=1
devmgmt.msc
device manager opens - click "view" - click "show hidden devices"
now you see all devices ever connected/installed
uninstall all devices regarding "kindle" and "android (composite) adb device"
connect KF - will startup by itself
select the most recent driver (that you have installed before by install_driver.bat from KFU) manually (check date/time)
now you should be set up with a good driver installation
btw. i'm on xp - it's working for xp and 7, 32 and 64 bit

MS2 with cm72 can not be accessed by adb

my MS2 has been installed cm72, and it seems very nice.
But two problem is bothering me:
1, Bootmenu can be use, I flash my phone with CN-2.6, and install cm72 using Droid2Bootstrap. But in the other day I try to install cm72 using Bootmenu-A953-1.0.5, my phone could not enter into recovery interface, insteadly reset again and again. I don't know why.
2. Now, cm72 is running find in my phone, but I can access phone using adb in my pc.
Code:
adb devices
List of devices attached
???????????? no permissions
Click to expand...
Click to collapse
Code:
adb shell
error: insufficient permissions for device
Click to expand...
Click to collapse
It's a great problem for me.
I need help, thanks
Is your PC a Linux?
You can google it to get a lot of solutions.
thanks,
just input the following
Code:
./adb kill-server
./adb start-server
./adb devices
but, adb is not need run as root before cm72, why
The day befor I had no chance to connect the MS2 with adb on Linux, but with RDSlight on Windows!
Maybe you have access to a Windows PC?
sasch42 said:
The day befor I had no chance to connect the MS2 with adb on Linux, but with RDSlight on Windows!
Maybe you have access to a Windows PC?
Click to expand...
Click to collapse
the same problem exists in windows or debian after cm72.
in official rom, adb do not need more privilege than normal user, in windows or debian
Anyone know why?

Categories

Resources