I still see a lot of people having trouble with ADB in ubuntu, so here is quick guide for anyone still having trouble.
The guide is located HERE and also can be viewed on post #12
*Updated 9-10-10* Thanks to xipher_zero for his very quick and easy guide (Much better than my original).
Hope this helps some people having issues.
If I install unbuntu it overrides my win7 correct?
Sent from my SGH-T959 using XDA App
Oh my!! I've been searched for this guide for a long time Thanks you so much MR.the3dman
Wykedx
Oh boy... where to get started. You could install Ubuntu without overwriting your W7 installation. Then you would "dual boot" your computer. As it boots up, you choose which OS to load. Or of course you could install Ubuntu on a computer by itself.
You don't need to install Ubuntu just to use ADB. ADB runs on both Win and Linux. What is it that you are trying to do? If you just want to learn linux, then make yourself a live CD and you won't have to worry about overwriting any operating systems.
But this is not a linux forum. If this is something that you are interested in, then google is your friend.
if you are interested in trying ubuntu, you might check this out: http://wubi-installer.org/. or just run a LiveCD, as already suggested.
Do you happen to have a HTC??
My output of lsusb:
Code:
Bus 002 Device 002: ID 04e8:681d Samsung Electronics Co., Ltd
Shouldn't /etc/udev/rules.d/51-android.rules contain 04e8 instead of 0bb4?
And no, even that didn't help me. I'm on Ubuntu Lucid Lynx 64 bit.
fantasyzer said:
Do you happen to have a HTC??
My output of lsusb:
Code:
Bus 002 Device 002: ID 04e8:681d Samsung Electronics Co., Ltd
Shouldn't /etc/udev/rules.d/51-android.rules contain 04e8 instead of 0bb4?
And no, even that didn't help me. I'm on Ubuntu Lucid Lynx 64 bit.
Click to expand...
Click to collapse
Thanks for noticing that! I have updated the rules with the correct ones. I have an htc also and uploaded the wrong rules. I am also on Ubuntu Lucid 64 bit and this is what worked for me. I also have done this on my netbook which runs 9.10 so I am really not sure what the issue is then. Did you use ADB from the sdk or from the app inventor adb in the guide?
If I read correctly when browsing for this topic, your instruction is to drop in these rule files, and then run adb using sudo
When using sudo to run adb, it'll always work, regardless of what's in your rules file
If you have your rules file correct, you don't need to do sudo adb
Just adb will work fine
animefans said:
If I read correctly when browsing for this topic, your instruction is to drop in these rule files, and then run adb using sudo
When using sudo to run adb, it'll always work, regardless of what's in your rules file
If you have your rules file correct, you don't need to do sudo adb
Just adb will work fine
Click to expand...
Click to collapse
I did try this, I removed my rules and reloaded my udev folder then tried adb with sudo and it was a no go (I get nothing listed under the list of devices). Also the only way I could get adb to recognize anything without sudo was by adding a line in the rules making my user as the owner, but even still without sudo under devices I get ???????????? no permissions. With sudo and the rules everything works fine which is why I wrote the guide that way.
If you don't want to run ADB as root you can follow the steps in this post
http://forum.xda-developers.com/showpost.php?p=7282335&postcount=4 - FOR SAMSUNG ONLY DEVICES!!!
after you installed SDK.
I also have adb in my path so I do not have to be in the tools directory, and can execute it from anywhere
In my .bashrc file (if you are using bash shell)
Code:
export PATH=$PATH:/path/to/android-sdk/tools
Thanks the3dman for the guide. Unfortunately I am still having problems as when I run the sudo ./adb devices nothing is listed. I followed the directions step by step and also confirmed my Vibrant is in debug mode (also confirms on the phone it is in debug mode when connected via usb. I even rebooted everything again, double checked everything and still no devices listed. I am running Ubuntu 10.04 Any ideas? Thanks so much!
-mG
Four Step ADB installation in Ubuntu
Here is a simple guide without using custom debs:
1. Download the SDK:
wget dl.google.com/android/android-sdk_r07-linux_x86.tgz
2. Extract the archive to the current directory and move into the extracted directory.
tar xvfz android-sdk_r07-linux_x86.tgz && cd android-sdk-linux_x86
3. Move the "tools" folder to your local system folder:
sudo mv tools /usr/local/share/android-tools
4. Create a symbolic link to the adb executable:
sudo ln -s /usr/local/share/android-tools/adb /usr/local/bin/
Done!
from a terminal type:
sudo adb devices (This will start the server and search for connected devices)
Are you running Ubuntu 64bit? If so you need to make sure that you have the 32bit compatibility libraries installed. From the command line run the following:
sudo apt-get install ia32-libs
This will allow you to run 32bit apps in 32bit mode. Not sure if this is whats causing your issue, but it might be worth a shot.
xipher_zero: Thank you, I followed your steps and it is working now.
Oh, I am running 32bit Ubuntu so that was not the problem.
lqaddict said:
If you don't want to run ADB as root you can follow the steps in this post
http://forum.xda-developers.com/showpost.php?p=7282335&postcount=4 - FOR SAMSUNG ONLY DEVICES!!!
after you installed SDK.
I also have adb in my path so I do not have to be in the tools directory, and can execute it from anywhere
In my .bashrc file (if you are using bash shell)
Code:
export PATH=$PATH:/path/to/android-sdk/tools
Click to expand...
Click to collapse
This is not working for some people that is what is being figured out. I am in the process of updating my guide and the new and better one should be up shortly.
xipher_zero said:
Here is a simple guide without using custom debs:
1. Download the SDK:
wget dl.google.com/android/android-sdk_r07-linux_x86.tgz
2. Extract the archive to the current directory and move into the extracted directory.
tar xvfz android-sdk_r07-linux_x86.tgz && cd android-sdk-linux_x86
3. Move the "tools" folder to your local system folder:
sudo mv tools /usr/local/share/android-tools
4. Create a symbolic link to the adb executable:
sudo ln -s /usr/local/share/android-tools/adb /usr/local/bin/
Done!
from a terminal type:
sudo adb devices (This will start the server and search for connected devices)
Click to expand...
Click to collapse
This version worked well also! Thanks its much shorter and easier than my method.
MrGibbage said:
Wykedx
Oh boy... where to get started. You could install Ubuntu without overwriting your W7 installation. Then you would "dual boot" your computer. As it boots up, you choose which OS to load. Or of course you could install Ubuntu on a computer by itself.
You don't need to install Ubuntu just to use ADB. ADB runs on both Win and Linux. What is it that you are trying to do? If you just want to learn linux, then make yourself a live CD and you won't have to worry about overwriting any operating systems.
But this is not a linux forum. If this is something that you are interested in, then google is your friend.
Click to expand...
Click to collapse
thanks for the response, and sorrry i didn't see this before lol,
what i am trying to do is be able to use adb, at the moment I can't seem to use it because my default.prop is not correct so i heard i have to use linux to be able to edit my default prop...when i try to adb push or remount i get permission denied and yet I have superuser permission and everything.
do you have to root your phone while being an administrator on the computer?
Wykedx said:
thanks for the response, and sorrry i didn't see this before lol,
what i am trying to do is be able to use adb, at the moment I can't seem to use it because my default.prop is not correct so i heard i have to use linux to be able to edit my default prop...when i try to adb push or remount i get permission denied and yet I have superuser permission and everything.
do you have to root your phone while being an administrator on the computer?
Click to expand...
Click to collapse
Try putting your phone in clockwork recovery then issuing the adb commands, and yes your phone has to be rooted.
Thanks for the excellent how to, however...
I've still got a problem:
after "sudo adb devices" (step 5) I always get this message:
List of devices attached
??????????? no permissions;
while "lsusb" gives me that:
Bus 002 Device 007: ID 04e8:681c Samsung Electronics Co., Ltd Galaxy Portal/Spica Android Phone
so how can I solve this?
(Kubuntu 10.10 is my current os)
RiverTam said:
I've still got a problem:
after "sudo adb devices" (step 5) I always get this message:
List of devices attached
??????????? no permissions;
while "lsusb" gives me that:
Bus 002 Device 007: ID 04e8:681c Samsung Electronics Co., Ltd Galaxy Portal/Spica Android Phone
so how can I solve this?
(Kubuntu 10.10 is my current os)
Click to expand...
Click to collapse
you'll need to edit a usb rule to "look" for the samsung phone. i forgot what file to edit and what to put in there, once i find the file, i'll post it from my laptop.
EDIT: lol, i found it.
http://forum.xda-developers.com/showpost.php?p=7343021&postcount=1
Related
Hey, I'm trying to push some stuff onto my mytouch using the included bridge tool, adb, and can't quite get it to work. AKA, I have no effing clue what I'm doing. I'm good with everything else, but when you sit me in front of Terminal I'm useless. Anyway, running Mac OS X, 10.5, I've got the SDK installed, exported, all that, but the internet has been no help with telling me what to do next. Please, someone help? D:
not sure on mac
but on pc i mostly put the files i want to push in to the sdk tools folder which gives you less to type
if you want to push stuff you need to know where to push on phone like
adb remount (makes drive read/write)
adb push xxxx.ogg /system/media/audio/ringtones/
if you want to install something
adb install twitter.apk
so my terminal looks like this (ignore errors phone not in usb)
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\SI>cd s\tools
C:\Users\SI\s\tools>adb remount
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
C:\Users\SI\s\tools>adb push xxxx.ogg /system/media/audio/ringtones/
error: device not found
C:\Users\SI\s\tools>
sitimber has given some good tips. On a Mac, you have to put "./" in front of adb to get it to execute.
For example, I have the Android SDK installed in /Developer/Android. In order for me to use adb, I open terminal and do the following:
cd /
cd /Developer/Android/Tools
./adb (insert whatever adb command here)
jsnyng said:
cd /
cd /Developer/Android/Tools
./adb (insert whatever adb command here)
Click to expand...
Click to collapse
worked perfectly! all the info i was getting was either for windows or linux and i was getting wicked confused. i have like nooo training with terminal so i was lost. that worked perfectly, thank you :]
do i still have to type "adb (command)" when i'm in the shell? i know that far, that im in the adb shell when there's a # next to my open commandline.
This will make it a step easier. If you want to be able to "adb command" every time you open the shell without changing directories,
Open terminal.
Run:
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
Click to expand...
Click to collapse
How you will be able to see hidden files.
Download the OSX SDK http://developer.android.com/sdk/download.html?v=android-sdk_r3-mac.zip
Unzip it. Move the entire folder into your root directory "/"
rename it to "android".
Launch TextEdit.app
Hit "Format>Make Plain Text"
Now type (in the document)
export PATH=${PATH}:/android/tools
Click to expand...
Click to collapse
Save is as
.bash_profile
in YOUR HOME DIRECTORY.
Make sure you uncheck "If no extension, use .txt"
Say yes when it asks if you want to make this a system file.
now close terminal (all the way) and relaunch. Type "adb" and whatever you'd like and you're set!
jewishjawsh said:
do i still have to type "adb (command)" when i'm in the shell? i know that far, that im in the adb shell when there's a # next to my open commandline.
Click to expand...
Click to collapse
No, you don't.
chordmasta's directions for creating a .bash_profile are correct, but I'll point out that you don't need to move it to root. I personally prefer not to clutter up root with my personal stuff. You also don't need to rename it if you don't want to.
For example, if you have it in "Documents", you would use this path (replacing my username "softbanksucks" with the name of your home directory.)
Code:
export PATH=${PATH}:/Users/softbanksucks/Documents/android-sdk-mac_x86-1.6_r1/tools
softbanksucks said:
No, you don't.
chordmasta's directions for creating a .bash_profile are correct, but I'll point out that you don't need to move it to root. I personally prefer not to clutter up root with my personal stuff. You also don't need to rename it if you don't want to.
For example, if you have it in "Documents", you would use this path (replacing my username "softbanksucks" with the name of your home directory.)
Code:
export PATH=${PATH}:/Users/softbanksucks/Documents/android-sdk-mac_x86-1.6_r1/tools
Click to expand...
Click to collapse
Thanks for pointing that out. I should have mentioned it. I knew this walkthrough would work without having to change values.
chordmasta said:
Thanks for pointing that out. I should have mentioned it. I knew this walkthrough would work without having to change values.
Click to expand...
Click to collapse
No prob - knew that you knew, just figured I'd point it out for those who don't
I've been searching around the forums,the stickies and Google on how to install ADB in Ubuntu from scratch but I wasn't able to get a guide anywhere. What I found mostly are for Windows or little bits and pieces of info which did not cover the whole thing. Which is when I decided to grab some Tab and Mountain Dew, and Google my way through to make it work and share it to those who had trouble or no idea how to install it on Ubuntu.
When I'm writing this, I'm using Ubuntu 10.10 64bit to install and run everything. I will update the guide periodically for updates and other things. There was mentions of using Eclipse SDK while searching around, but I won't be touching on that. There's another guide for it at the end of my guide. I have yet to encounter any problems while using ADB in 64bit environment. I've tested it out on the 32bit platform as well and it works. It'll also work on SD and NAND versions of Android for the HD2, since it's my main phone. Also, this is my first time making a guide, so bear with me if there's any mistakes. I've checked the article a few times hoping that it's clear and easy to understand. From
Steps 1 to 4 and Steps 6 and 7, there's no differences in installation instructions for Ubuntu 11.04. You do have to take special note in Step 5 and the key difference of ADB working for your device in Ubuntu 11.04 is found here.
For Ubuntu 11.10, you can see the guide here. Credit goes to loveubuntu for making it.
Step 1. Install JDK
You'll need to install JDK for ADB to work. If you have already installed JDK, I recommend reinstalling it again, just in case there are new updates or you have the older version.
In Terminal, do the following
Code:
$ sudo add-apt-repository ppa:sun-java-community-team/sun-java6
$ sudo apt-get update
$ sudo apt-get install sun-java6-jre sun-java6-bin sun-java6-jdk
Edit: If you're getting a "404 Not Found" when trying to install java in Ubuntu 11.04, this link here will give you a quick fix.
Edit: If you want or need to use Eclipse, here's a simple installation command
Code:
$ sudo apt-get install eclipse ruby rubygems ruby-dev libxml2 libxml2-dev libxslt-dev openjdk-6-jdk ant git
$ sudo gem install nokogiri
Step 2. Download and Install Android SDK
Download the Android SDK. Obviously, choose the one for linux (android-sdk_rXX-linux_86.tgz), where "rXX" is the latest version.
Code:
http://developer.android.com/sdk/index.html
Extract the android-sdk-linux_x86 folder from android-sdk_rXX-linux_x86.tgz. Just double click the tgz file, and drag-n-drop the that lone folder to your desired location. In my case, I extracted the files to my Home Folder, which I highly recommend. I'll also advice to not renaming the folder.
Step 3. Choose packages to install
In Terminal, type the following -
Code:
$ cd ~/android-sdk-linux_x86/tools
$ ./android update sdk
The 'Android SDK and AVD Manager' window will appear (screencap below). You can choose to accept all of them or just install all except for Android 1.5 and 1.6. Once installation is finished, it will prompt you to restart the manager. Just click 'Yes' and close the manager
Step 4. Check your device's permission
Now head over to the platform-tools directory
Code:
$ cd ~/android-sdk-linux_x86/platform-tools
Check if you have permission for your device
Code:
$ ./adb devices
If you're getting the following, go on to Step 5.
Code:
List of devices attached
???????????? no permissions
If you're getting something like this or other random numbers with the word device next to it, congrats! You now could use ADB. Now go on to Step 7.
Code:
List of devices attached
0123456789ABCDEF device
Step 5. Giving permission to your device
You'll need to create a certain udev rule. First off type the following in Terminal:
Code:
$ sudo gedit /etc/udev/rules.d/99-android.rules
For those using Ubuntu 10.10, use the following! For Ubuntu 11.04 users, please scroll down a little for 11.04 guide.
Ubuntu 10.10
Once the gedit window pops-up, type the following line.
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="####", SYMLINK+="android_adb", MODE="0666" GROUP="plugdev"
Take note of ATTRS{idVendor}=="####". Replace #### to the correct Vendor ID of your device. If you're using Acer, then it's 0502, for HTC it's 0bb4. ADB might not be able to detect your device if you use the wrong ID. Here's a list of each vendor's ID. Source: http://developer.android.com/guide/developing/device.html
Code:
Manufacturer USB Vendor ID
Acer -0502
Dell -413c
Foxconn -0489
Garmin-Asus -091E
HTC -0bb4
Huawei -12d1
Kyocera -0482
LG -1004
Motorola -22b8
Nvidia -0955
Pantech -10A9
Samsung -04e8
Sharp -04dd
Sony Ericsson -0fce
ZTE -19D2
Save the file and exit out of gedit. Back in Terminal execute the following
Code:
$ sudo chmod a+rx /etc/udev/rules.d/99-android.rules
$ sudo restart udev
For Ubuntu 11.04. Special thanks to mmdl1001 for figuring this one out! Would've posted it earlier Ubuntu 11.04 was a little nasty on my PC for me to test it out. VMWare saved me though...
For Ubuntu 11.04 users, you'll need an 8 digit number, which is slightly different from Ubuntu 10.10. Copy and paste the following code in the 99-android.rules file you created
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="####:####", SYMLINK+="android_adb", MODE="0666" GROUP="plugdev"
TEST=="/var/run/ConsoleKit/database", \
RUN+="udev-acl --action=$env{action} --device=$env{DEVNAME}"
Next, you'll need to find the digits to replace "####:####' above. In terminal type
Code:
$ lsusb
You should be getting a list like so. Note that what is generated in your PC will be much different from mine below!
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 010: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 007: ID 22b8:2d66 Motorola PCS
Look for your device. It's easily identifiable via its brand . In this case, "Bus 001 Device 007: ID 22b8:2d66 Motorola PCS" is for my device. Copy the ID numbers, 22b8:2d66 for my case, and replace the ####:#### in the 99-android.rules file. Save the file and close gedit and execute the following in Terminal.
Code:
$ sudo service udev restart
Now to check if it works
Code:
$ ./adb devices
You should be getting the following line or something similar.
Code:
List of devices attached
0123456789ABCDEF device
Congrats! Now you can use ADB in Ubuntu! Now hop on to Step 6!
If that fails and still give you "???????????? no permissions", try restarting the adb server. That should do the trick. If that still doesn't work, check the file, 99-android.rules, that you created earlier. Most likely you have put in the wrong Vendor ID.
Code:
$ sudo adb kill-server
$ sudo nohup adb start-server
Step 6. Now to have fun!
Head down to Captainkrtek's ADB Workshop and Guide for everyone to learn how to use ADB. Take note that while using adb in Linux, you'll need to type ./adb to execute adb unless you create a path in bashrc. Go to Step 7 for that . For now, here are some examples on running adb if you don't create a path.
To get into the phone
Code:
[email protected]~/android-sdk-linux_x86/platform-tools:~$ ./adb shell
To grab files from phone
Code:
[email protected]~/android-sdk-linux_x86/platform-tools:~$ ./adb pull /system/etc/file.txt file.txt
To send file to phone
Code:
[email protected]lelune-~/android-sdk-linux_x86/platform-tools:~$ ./adb push this.txt /sdcard/this.txt
Also, do take note that when you pull a file, it will save itself in your android-sdk-linux_86 folder if no destination folder was given.
Step 7. Create path for ADB
Code:
$ sudo gedit ~/.bashrc
Add the following line at the very end of the file. Once you're done, save and exit.
Code:
# Android tools
export PATH=${PATH}:~/android-sdk-linux_x86/tools
export PATH=${PATH}:~/android-sdk-linux_x86/platform-tools
Now you can just run adb like it's a command.
Edit: Okay, for some odd reason, while the above worked for my desktop, it failed when I tried it on my notebook. If you tried to create a path but it failed, here's an alternative method
Code:
$ gedit ~/.profile
Once the gedit window pops up, scroll down to the very bottom of the file and add this line
Code:
[...]
PATH="$HOME/android-sdk-linux_x86/tools:$HOME/android-sdk-linux_x86/platform-tools:$PATH"
Once you've saved and closed gedit, run the following command in Terminal
Code:
export PATH="$HOME/android-sdk-linux_x86/tools:$HOME/android-sdk-linux_x86/platform-tools:$PATH"
And that's about it. Feel free to comment, give suggestions or ask questions if you're still unsure.
Also for more in-depth guide, try HowtoForge. Just found this guide today and I find it VERY useful and even have a good guide on Eclipse.
Took me about 10 mins to get this going. Thank you very much!
I have a guide to setup up a build enviroment for compiling android on a ubuntu 10.10 64bit or 32bit that covers adb also along with test signing. Just google guide to compiling android, covers cm7 and you will find it. It might be under gridlock32404 which was my old user name
Sent from my HTC Vision using XDA App
ffffffffuuuuuuuu where was this last year? took me 2 days to get ADB working in Ubuntu 10.04 lol.
i do have the Ubuntu 10.10 ISO image...thinking about dual booting with win7 64bit.
not sure why i want to go back to Linux though...games ran slower on it =/
Amazing work man. It works like a charm with my milestone.
nice tutorial but it would be even nicer to have a .deb; I never made debs before but I think this should all be doable with rpm though, so I guess it should also be doable with debs
(eg with a postinstall script update udev rules, using sed, restart abd and add a .desktop file)
saved a lot of do it myself
i was about to do this thank you for doing it first nice
I get following error when i try to refresh sources.
Failed to fetch URL https://dl-ssl.google.com/android/repository/repository.xml, reason: java.lang.RuntimeException: error instantiating default socket factory: java.security.KeyManagementException: java.security.KeyStoreException: java.io.FileNotFoundException: /usr/lib/jvm/java-1.5.0-gcj-4.4/jre/lib/security/cacerts (No such file or directory)
Click to expand...
Click to collapse
Edit:- I installed all packages like openjdk, openjre, icedtea etc and i was able to connect to google repo.
thanks Im installed
atapia984 said:
Took me about 10 mins to get this going. Thank you very much!
Click to expand...
Click to collapse
You're welcome! Honestly, it took me about 2 to 3 hours to get it running.
godutch said:
nice tutorial but it would be even nicer to have a .deb; I never made debs before but I think this should all be doable with rpm though, so I guess it should also be doable with debs
(eg with a postinstall script update udev rules, using sed, restart abd and add a .desktop file)
Click to expand...
Click to collapse
Personally, I don't think a .deb file is required. Almost everything can be found in the repository anyways and it's quite easy to set up using terminal, and uh, I never really made debs before either
thank u very muchhhhhhhhhhhhhhhhhhhhhhh, ADB was big problem with me .
thanks again.
sdk now says "x86"
I'm not sure if anyone else had this problem, but I was foolishly copying and pasting the commands over from the OP and it didn't work.
However, when I realized that the SDK package is now titled "android-sdk-linux_x86" with that tiny little "x" before the "86", I got it to work flawlessly.
Now my Ubuntu ADB installation works easier than my Windows ADB!
could someone tell me if you can run movie after you run ubuntu on your PDA
expeciali .mkv video...
please ansevar me...
strikeir13 said:
I'm not sure if anyone else had this problem, but I was foolishly copying and pasting the commands over from the OP and it didn't work.
However, when I realized that the SDK package is now titled "android-sdk-linux_x86" with that tiny little "x" before the "86", I got it to work flawlessly.
Now my Ubuntu ADB installation works easier than my Windows ADB!
Click to expand...
Click to collapse
Thanks for the heads up! I've updated the guide accordingly. Looks like they've changed the name with revision 10
Cool write up. definitely bookmarked.
only because i want to compare it to the method i used to get it running earlier. There are a lot of extra steps it looks like with this method that i didn't do earlier.
Thanks. First method to add to path didn't work, but second did finely.
very nice, thank you. Only three hints that helped me get everything working perfectly:
1- Assume you have no permission and create the udev rule step. In that same step when typing
Code:
./adb devices
to see if it worked, make sure you cd to the right directory. You have to be in
Code:
cd ~/android-sdk-linux_x86/platform-tools
.
2- In step 7 creating paths, eliminate the space between {PATH}: and ~/android. If left that way, the terminal gives you a not valid identifier error.
3- The Howtoforgelink at the bottom is very nice also but note that they are using an older SDK and file name has to be changed if you want the latest (add the x).
I hate the fact that most guides out there for a Linux based OS (Android) is written for Windows. Quite ironic. Thanks again for your hard work.
loveubuntu said:
very nice, thank you. Only three hints that helped me get everything working perfectly:
1- Assume you have no permission and create the udev rule step. In that same step when typing
Code:
./adb devices
to see if it worked, make sure you cd to the right directory. You have to be in
Code:
cd ~/android-sdk-linux_x86/platform-tools
.
2- In step 7 creating paths, eliminate the space between {PATH}: and ~/android. If left that way, the terminal gives you a not valid identifier error.
3- The Howtoforgelink at the bottom is very nice also but note that they are using an older SDK and file name has to be changed if you want the latest (add the x).
I hate the fact that most guides out there for a Linux based OS (Android) is written for Windows. Quite ironic. Thanks again for your hard work.
Click to expand...
Click to collapse
Thanks, I'm gonna try it out on my notebook when I get a chance on Monday. Left it at my workplace. Hopefully, that little space is the reason why the path didn't work on my notebook .
As for the HowtoForge guide link, I wasn't able to find a more updated version for it. It'll be great if they update that guide as well though.
It really is kind of sad, and ironic, that Windows is dominating even on a Linux based OS which is Android. But after playing around with both Windows and Ubuntu for ADB, I personally find ADB on Ubuntu is much more easier (and a bit more stable) to handle. Maybe it's because I usually work with command line on Linux and more on GUI on Windows.
I came across this thread on DF also that seems to be very helpful. CorCor67 put a lot of time into it.
http://www.droidforums.net/forum/droid-themes/129400-themer-studio.html
I cross referenced both threads for those looking
Anybody know howto - about fastboot.exe I mean I have done all the steps ahead and have adb installed but cant figure out how to install fastboot in platform-tools directory.
I reinstalled it again but there is no fastboot.exe it hadn`t appeared in platform-tools. 3 month`s ago I did it just like that and it installed fastboot automagically but this time I just don`t now what to do and where to dig. Not able to flash radio at the moment.
Ubuntu 10.04
Desire HD
These are instructions for rooting Android devices that utilize the RK3066 chipset (Cortex A9 Dual Core, MALI Quad-Core GFX).
I have tested and verified that these instructions work for the UG007 Android-on-a-stick...they *should* work with any other devices that utilize the same USB chipset. I can almost guarantee this will work on the Imito MX1/2 as you can swap ROMS from this device.
(Basically, if you have the right ADB drivers, you should be good to go)
As per every other thread you read on this site - I TAKE NO RESPONSIBILITY FOR ANY DAMAGES YOU MAY CAUSE TO YOUR DEVICE.
This is a fairly risk-free mod, but you know...$hit happens.
Okay. Let's start.
THIS TUTORIAL ASSUMES YOU HAVE ADB AND KNOW HOW TO USE IT, and that you're in a Windows environment. There are numerous places on the web where you can find this info...and I ain't yo mamma.
1. Download all the files attached to this thread.
2. Attach your RK3066 device to your computer via it's microUSB port. You'll need to have it hooked to a display too.
3. Once booted, go to system settings. Under settings > developer options, enable USB Debugging. Under settings > USB, click "connect to computer" (This may vary depending on your ROM configuration. The point here is to have debugging enabled and your computer to recognize the stick in device manager as something other than USB storage)
4. Extract the right drivers for your system (x86/x64)
5. Go to device manager on your computer. Look for the new "unknown device". Right-click, pick "update driver software"., "browse my computer".
6. Browse to wherever you extracted the drivers in step 4. Click Next. Confirm that you want to install.
7. Open a command window in the directory where you have ADB. Type "adb devices". Still nothing, right?
8. Navigate to C:\users\MYUSERNAME\.android, where "MYUSERNAME" is your User Name. (Duh?)
9. Create a file called adb_usb.ini
10. Open it in a text editor. Add the following string and save (This tells ADB to look for our Vendor ID:
0x2207
11. You should now be able to type "adb devices" at CMD and see your device.
12. Now for the fun. Extract the stuff from "pushme" to the same directory as ADB.
13. Enter the following commands (note: The "$" and "#" symbols do not get keyed in):
Code:
adb push psneuter /data/local/tmp
adb shell
$ cd /data/local/tmp
$ chmod 777 psneuter
$ ./psneuter
14. Psneuter should run and close shell when done. Enter MOAR commands:
Code:
adb kill-server
adb devices
adb shell
15. Take a good look. Is there now a "#" sign? Good. You now have root access. You may continue. If not, then proceed to go yell at me in the comments. If yes, then proceed to enter the last batch of commands to make your newfound privileges permanent:
Code:
mount -o remount,rw -t rfs /dev/block/st19 /system
exit
adb push busybox /system/bin
adb push su /system/bin
adb install Superuser.apk
adb shell
# chmod 4755 /system/bin/busybox
# chmod 4755 /system/bin/su
# mount -o remount,ro -t rfs /dev/block/st19 /system
# exit
adb reboot
After a reboot, download a root app from Play Store to see if it worked! I find Root Checker is boffo for this sort of thing:
https://play.google.com/store/apps/...tcheck&feature=nav_result#?t=W251bGwsMSwyLDNd
THANKS/CREDITS:
Aaron Orquia @ Pocketables.com for the original "universal" root method.
AMJtech's tutorial where I found working ADB drivers and the adb_usb.ini bit to get it recognized.
The guy(s) who make Super1ClickRoot for putting all the necessary files in one easy-to-find spot.
Thanks for this tutorial.
A couple of notes:
Wow !! That's a lot of extra steps for you Windows users. Mac and Linux users start at step 11 (but if you are a Mac or Linux user, you already knew that. )
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Is step 13 necessary? adb remount works on mine. (not sure if I had to adb root first or not) but I can have a root shell via adb without psnueter.
If adb remount succeeds, skip step 14, and continue with the 3rd line of step 15.
Linuxslate said:
Thanks for this tutorial.
A couple of notes:
Wow !! That's a lot of extra steps for you Windows users. Mac and Linux users start at step 11 (but if you are a Mac or Linux user, you already knew that. )
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Is step 13 necessary? adb remount works on mine. (not sure if I had to adb root first or not) but I can have a root shell via adb without psnueter.
If adb remount succeeds, skip step 14, and continue with the 3rd line of step 15.
Click to expand...
Click to collapse
Thanks for the input! Yes, yes, I know windoze makes more work. It's also pretty widespread for folks.
For step 13 - I think it depends on the device. It would be nice for others to weigh in and let me know if it's needed. If not, I can totally remove it.
Also, in the other ROM thread, I made, it's even easier to root - you just grab one of the pre-rooted ROMS and drop it in SD card...the system does the rest. Mind you, this is for the UG007.
Links UG007
If you Bluetooth connection is not working properly, try to install this custom ROM: http://blog.geekbuying.com/index.php/category/android-tv-stick-tv-box/ug007/
How to install CWM-based Recovery: http://androtab.info/clockworkmod/rockchip/
Both worked for me. I was able to connect my BT Keyboard/Mouse Pad combo
./psneuter
Failed to set prot mask (Inappropriate ioctl for device) ??
nice tutorial.. while finding the best way to work my ug007 i stumbled upon this thread via armtvtech.com
currently i only knew this tutorial to root the device, but looking at yours ill give it a try first.
digitalhigh said:
Also, in the other ROM thread, I made, it's even easier to root - you just grab one of the pre-rooted ROMS and drop it in SD card...the system does the rest. Mind you, this is for the UG007.
Click to expand...
Click to collapse
you cant install custom roms without flashmode, cant do flashmode without opening device.. or did i get it wrong!? talking about the ug007
actually you can install a custom rom once you are rooted without opening the device, here
Linuxslate said:
(Hint: It may not be /just/ the udev stuff.)
Click to expand...
Click to collapse
ehm.. im still preparing to root, i guess you hint at the android sdk?
if not ill holla back at you and complain why you didnt write it out in first place
but very good to know that i skip alot by "almost" only installing ubuntu to a vm
I may be missing something, but I couldn't get this to work on my UG007
psneuter didn't work for me, gave me an error about 'invalid ioctl' or something. But the strangest thing is that "adb shell" already shows the # in the prompt.
To confirm my suspitions, I also typed "adb root", which returned "adb is already running as root".
So I proceeded with the rest of the instructions. No errors appeared, installed Superuser and I can see su and busybox in system/bin
But when I download root checker it says it wasn't properly rooted. installing terminal and type "su" says permission denied - and that's it.
Am I missing something? I'm new to this rooting thing, so please don't be angry with my noobish questions
I managed to do it - but *not* by following this tutorial.
I used this: armtvtech.com/armtvtechforum/viewtopic.php?t=28 (Cant post links yet, sorry!)
Only ran the "TPSarky-VonDroid-Root" bat, and presto! I had root on UG007.
I even fixed the changing MAC address problem with wlan.ko from armtvtech.com/armtvtechforum/viewtopic.php?f=69&t=632&start=10 (link on page 2). I just copied it to /data/local/tmp, set permissions as rwr--r-- and then used root explorer to copy it to /system/lib/modules - now I have wifi signal every time I boot the device, and don't need to mess with my router config every time
I also manage to get xbox360 wired controller working. xpad.ko on /data/local/tmp and then insmod /data/local/tmp/xpad.ko - just connect the joystick after that, and it will be recognized. Only problem is, after a reboot I have to insmod again.
I tried doing the same thing I did with wlan.ko, but nothing happens - system won't load it on boot. Am I missing something here?
The psneuter is broken
I'm on Linux, running a RK3066, and psneuter gives "Failed to set prot mask (Inappropriate ioctl for device)". Running Ice Cream Sandwich 4.1.1, kernel 3.0.8+, build RK30_anpei10w1am-r4.0.57.20121207, A10-2 cpu.
SLotman said:
I may be missing something, but I couldn't get this to work on my UG007
psneuter didn't work for me, gave me an error about 'invalid ioctl' or something. But the strangest thing is that "adb shell" already shows the # in the prompt.
To confirm my suspitions, I also typed "adb root", which returned "adb is already running as root".
So I proceeded with the rest of the instructions. No errors appeared, installed Superuser and I can see su and busybox in system/bin
But when I download root checker it says it wasn't properly rooted. installing terminal and type "su" says permission denied - and that's it.
Am I missing something? I'm new to this rooting thing, so please don't be angry with my noobish questions
Click to expand...
Click to collapse
Try renaming old "su".
Check permissions on the su and busybox you installed.
MK808, MK809 [model T002], and the MK802 III anyone?
Hi,
Thanks OP for this information.
I have a Samsung S3 [my first android device] which I rooted with no problem, but am a total noob when it comes to these android sticks.
One can say they are very similar, so I wont be completely in the dark. OK, now that we got that out of the way...
Can anyone please confirm whether they have used this with the MK808, MK809 [model T002], and the MK802 III,
I have ordered these from 1 from amazon and 2 from ebay and am expecting delivery shortly, therefore I just want to make sure before I go bricking them one by one...
I notice that they all have RK3066 Cortex A9 chips but are manufactured by different companies. The ones I see on eBay, although they all bear the same code MK8xx, they all look very different! I presume the MK8xx code is a universal model?? just like 80486 was to the PC? given the case does this method work universally?
I intend to set them up with XBMC media centres and to use with a Xbox controller. Any advice on the best way for achieving this would be nice too.
Thanks
:good:
Linuxslate said:
Thanks for this tutorial.
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Click to expand...
Click to collapse
Linuxslate, I have an MK808 that shows up in lsusb as 2207:300a when I put it in "flash mode" but it never shows up via "adb devices".
I got mine the other day and it turned out to be rooted already?
I decided to install SuperSu and that's how I found out it was rooted.
Immediately, installed Busybox, System Tuner Pro and Titanium Backup.
Rob
Rob sent this from his SPH-D710 via Tapatalk
So would this possibly work on this - http://www.zoostorm.com/Products/357-zoostorm-sl8-3305-1030-tablet-pc.aspx
States it's a Rockchip RK3066 Cortex A9 Dual Core 1.5GHz, running 4.1.1 Jelly Bean, quite interested in getting one & root would be a bonus.
psneuter broken
Hello,
the psneuter attached to the first post doesn't do anything to my ug007. I have the same error others have posted here and haven't gotten a reply about.
To unlock, I used the script that's mentioned in a post above, TPSarky-VonDroid-Root. If you google that, you'll find a download link amongst the results.
Thank u very much...:thumbup:
................................................................................................
Linuxslate said:
Try renaming old "su".
Check permissions on the su and busybox you installed.
Click to expand...
Click to collapse
Can you elaborate a little bit what you mean by renaming "su"?
I'm having the same issue..
Both su and busybox are having the same permission -rwsr-xr-x.
Sent from my Transformer Prime TF201 using XDA Premium HD app
I configured one of these at work. Upon using the terminal app and typing in su I got the # sign. They seem to come from the factory rooted already.
Sent from my Nexus 4 using xda app-developers app
ageerer84 said:
I configured one of these at work. Upon using the terminal app and typing in su I got the # sign. They seem to come from the factory rooted already.
Click to expand...
Click to collapse
Not exactly: this particular su can be used only from adb console, or at least that how it was on my tablet. So you need to replace it with a Superuser apk's su to get all features of rooted android. You can get one e.g. from FDroid
--
blog
Not sure what u mean by on your tablet. Android devices don't typically come rooted but I was surprised to have root access via terminal emulator on this stick PC. I just took it out of the box and definitely didn't have to go through the adb interface on a computer to flash superuser or what have you. Is this just me or is this a typical experience with this particular device?
Sent from my Nexus 4 using xda app-developers app
HOW TO ROOT YOUR LENOVO IDEATAB A1000
<DISCLAIMER>
By attempting these steps, your warranty will be void. Even worse than that, it might cause crashes, freezes, random explosions, 2nd degree burns, or even turn your beloved tab into $100+ paperweight. What works on mine might not work on yours, so don't attempt if you don't know what you're doing. Do at your own risk. Corrections are welcome. I must admit that I'm not an expert, so any info I posted might be wrong, and I can't offer you much help. I'm not responsible for anything arising from the use of this how-to. I can only wish you good luck.
<WHY ROOT?>
- Without root or OTA upgrades (at time of writing, Indonesian customers still can't get it), you'll be stuck with ~500MB internal memory. That's annoying.
- You're stuck with the default IO scheduler (cfq) and governor (hybrid, haven't heard that one..)
- You have an incredibly large amount of bloatware you can't get rid of, in that already cramped up internal storage
- Did I mention freedom?
<REQUIREMENTS>
This method is originally used to root Acer Iconia B1-A71. Somehow I noticed that the two actually has the same chipset, MTK8317 (if it really was relevant ). So I tried the method, and through sheer n00b's luck, it worked like a charm!
Lenovo IdeaPad A1000-G --> 4GB storage, 2G/EDGE. This method haven't been tested on A1000-T/F, different storage cap (16GB, etc.) or other variants, but it should work with slight modification. Screenshots of my specs are attached below. Remember, proceed at your own risk!
A Linux System. Never tried on Windows or Mac. I personally used Linux Mint 15. The source post uses Ubuntu.
working ADB (android-tools-adb). You can get this from synaptics, apt-get, etc. If your system can detect adb devices, you should be fine.
Superuser Binary
Busybox Binary (You can get these two from the links on original post. XDA says noobs can't post links :'( )
ORIGINAL THREAD
<CREDITS>
XDA Senior Member entonjackson, for writing such a noob-friendly how-to for rooting Acer Iconia B1-A71 and for allowing me to use it for this how-to.
XDA Member alba81, for discovering the method as acknowledged on the original post by entonjackson
All awesome gurus on XDA which I can't mention one by one.
<THE STEPS>
1. Extract the android sdk to your home folder, e.g. a user named Bob will use like /home/bob
2. Open a terminal
3. Now plug your A1000 into your machine and turn on Debugging Mode (Go into Settings -> Developer Tools, turn on Developer tools, then turn on USB Debugging Mode)
4. Now back at the keyboard of your Linux machine in your terminal type:
Code:
sudo adb devices
The output should be something like:
Code:
123456789ABCDEF device
If it's not, google for it. Somehow your Linux hasn't detected the A1000, although the android sdk for Linux brings all needed drivers with it.
If your device was found, congratulations. The adb connection between your linux machine and your tablet is intact.
5. Now extract the downloaded busybox archive to your home folder, in it there should be a busybox binary. So Bob does:
Code:
sudo ./adb push /home/bob/busybox /data/local/tmp
Code:
sudo ./adb shell
Code:
chmod 755 /data/local/tmp/busybox
6. You should copy the busybox binary into a directory where you can access it as a plain non-root user on the tablet. We need this binary. so we can apply unix tools like telnet, dd, cat, etc. But for now we need it to establish a telnet session between our tablet and our linux machine.
(This point is written on original post. Seems important, but as soon as I finished step 5, I can use those tools)
7. Dial *#*#3646633#*#* to enter Engineer Mode
8. Go to Connectivity -> CDS Information -> Network Utility
9. type the following command:
Code:
/data/local/tmp/busybox telnetd -l /system/bin/sh -p 1234
Advice from original poster: copy and paste it from the browser on your tablet, because dependent on which keyboard app installed, this can be freakin tricky. In the next step you will learn, why it's so important why this command should be correct.
10. Tap on Run. You won't get any feedback, so you will never know if the entered command runs properly or not. That's why you should make sure the command is ok.
Now we have started our telnet server on the tablet.
11. Back in the terminal type:
Code:
/data/local/tmp/busybox telnet 127.0.0.1 1234
If you now get an error like couldn't find busybox or something, then either adb push failed or you forgot to chmod, in step 5
12. Now enter:
Code:
cat /proc/dumchar_info
You should get a bunch of lines, try to find a line containing the partition named android
{..... partition list .....}
android 0x0000000028A00000 0x00000000020E8000 2 /dev/block/mmcblk0p3
{..... partition list .....}
13. We will create a dump of our android system. This is the point where different variants *MIGHT* have different parameters. This step is important, as wrong parameter will result in unmountable image.
Stop. Take a deep breath. If you're not familiar with dd, find a good doc of it. There's a plethora of them.
Get yourself a programmer's calculator (Linux Mint 15 has one built in).
Here's what you'll do :
Convert the hex number on the 3rd column into decimal. In my case (0x20E8000) will yield 34504704. Divide by 4096. The result (8424) goes to the skip parameter.
Convert the hex number on the 2nd column. In my case (0x28A00000) will yield 681574400. Divide by 4096. The result (166400) goes to the count parameter.
So the full dd command will look like :
Code:
dd if=/dev/block/mmcblk0 bs=4096 skip=8424 count=166400 | gzip > /cache/system.img.gz
Do a full sanity check before hitting enter! It will take about 5 minutes.
14. After it's finished we must make the image readable for adb, so we do:
Code:
chmod 777 /cache
and
Code:
chmod 777 /cache/system.img.gz
15. Leave the telnet, and then adb shell session by:
Code:
exit
Code:
exit
16. Now we pull our image by
Code:
sudo adb pull /cache/system.img.gz
wait 1-2 minutes.
It should be then located inside /home/bob. It did for me. If not, do a search . It should be a .gz, extract it right there (or /home/bob if it isn't there)
17. Now we need to modify our system image by adding the tiny but helpful su binary. Extract the SU binary to /home/bob.
18. We create a folder where we will mount our system image to. To create it do:
Code:
sudo mkdir /media/a1000
19. Now we mount it:
Code:
sudo mount -o loop /home/bob/system.img /media/a1000
if it fails, then you entered wrong parameters on step 13
20. Now we copy our SU binary to our mounted system image:
Code:
sudo cp /home/bob/su /media/a1000/bin
21. the su binary needs to have the proper rights to make it usable, so we 'suid' it with:
Code:
sudo chmod 06755 /media/a1000/bin/su
22. Let's unmount our baby by:
Code:
sudo umount /media/a1000
and because bob doesn't like a messed up system, he does:
Code:
sudo rm -rf /media/a1000
because he hopefully won't need it anymore.
23. We have to gzip it again to bring it back to where it belongs to. this we do by:
Code:
cd /home/bob
Code:
gzip /home/bob/system.img
24. So here we are now, we made it to the final Boss fight! The next steps are dangerous and should be performed with caution. We copy back our modified system image, which can brick your device, if you do a mistake! Enter adb shell again :
Code:
sudo adb shell
25. Remove the old boring image:
Code:
rm /cache/system.img.gz
26. Leave adb shell
Code:
exit
27. copy our cool new system image containing the su binary:
Code:
sudo adb push /home/bob/system.img.gz /cache
28. Enter adb shell again
Code:
sudo adb shell
29. Usually the telnet server on the tablet is still running, at least in my case it's been like that. That's why we can directly connect to the telnet server with:
Code:
/data/local/tmp/busybox telnet 127.0.0.1 1234
If this doesn't work, then obviously your telnet server isn't running anymore. So on your tablet if the telnet command is still entered (see step 9), tap on Run again and repeat step 29.
30. Now this is the most dangerous step in this how to (no it wasn't the mkdir one). You can copy following command to make sure everything is fine and paste it into your telnet session on your linux terminal.
<WARNING! SANITY CHECK! MAKE SURE *ALL* THE DD PARAMETERS MATCH THE FIRST DD (STEP 13) OR YOUR A1000 WILL TURN INTO A VERY EXPENSIVE PAPERWEIGHT!>
Code:
[B]/data/local/tmp/busybox zcat /cache/system.img.gz | dd of=/dev/block/mmcblk0 bs=4096 seek=8424 count=166400[/B]
After 1-2 minutes you're done, if your tablet or pc or yourself didn't catch fire, everything's fine.
31. Leave telnet / adb shell by doing
Code:
exit
Code:
exit
32. Reboot your A1000 via ADB, then exit
Code:
sudo adb reboot
Code:
exit
33. Unplug your tablet from PC
34. Install Superuser (No, not SuperSU, cause it won't work!). I personally use Superuser by ChainsDD, from Play Store
35. Be lucky. Your tablet and thus you are now free!
Don't forget to hit thanks, if this helps
hi, after step 13 (i double checked the command), i get this error
Code:
/system/bin/sh: can't create /cache/system.img.gz: Permission denied
/dev/block/mmcblk0: cannot open for read: Permission denied
I have the WiFi 4G version
Im too stuck in step 13.....nothing wrong with the script, can u give me a solution?
Im using A1000G also
@ts
Your guide work perfectl, in windows enviroment but mount step still need linux,
I've question are you using DirectoryBinding? Mine always close when playing Real Racing, its very annoying
You have suggeztion or alternative for DirectoryBinding?
Root with Windows ?
Hi,
I am a new member because i bought this tblet but i can't root. I don't have a linux environment, so there is a solution with W8 Pro 64 ?
Thanks a lot for you help,
ulisez said:
hi, after step 13 (i double checked the command), i get this error
Code:
/system/bin/sh: can't create /cache/system.img.gz: Permission denied
/dev/block/mmcblk0: cannot open for read: Permission denied
I have the WiFi 4G version
Click to expand...
Click to collapse
have you chmod-ed the busybox (or is the chmod successful without error)? Try chmod-ing the /cache before attempting step 13. It seems that you still don't have access to the NAND device (mmcblk0). Have you updated firmware via OTA?
artonelico said:
Im too stuck in step 13.....nothing wrong with the script, can u give me a solution?
Im using A1000G also
Click to expand...
Click to collapse
Do you encounter the same error message like ulisez had? Could you post the screenshot of the partition list (the lines after you execute dumchar_info)?
rmage said:
@ts
Your guide work perfectl, in windows enviroment but mount step still need linux,
I've question are you using DirectoryBinding? Mine always close when playing Real Racing, its very annoying
You have suggeztion or alternative for DirectoryBinding?
Click to expand...
Click to collapse
I personally use Link2SD by Bulent Akpinar to link apps to 2nd partition on my SDcard.
Letsar said:
Hi,
I am a new member because i bought this tblet but i can't root. I don't have a linux environment, so there is a solution with W8 Pro 64 ?
Thanks a lot for you help,
Click to expand...
Click to collapse
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
sammymaddog said:
have you chmod-ed the busybox (or is the chmod successful without error)? Try chmod-ing the /cache before attempting step 13. It seems that you still don't have access to the NAND device (mmcblk0). Have you updated firmware via OTA?
Do you encounter the same error message like ulisez had? Could you post the screenshot of the partition list (the lines after you execute dumchar_info)?
I personally use Link2SD by Bulent Akpinar to link apps to 2nd partition on my SDcard.
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
Click to expand...
Click to collapse
Link2SD doesn't link app data, do you have any option?
yes i had same message with ulyses, by the way im from indonesia too can i contact you through chat client?
oh yeah im using windows 7 and using cmd as a terminal in linux
thx before bro
sammymaddog said:
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
Click to expand...
Click to collapse
Ok, i see his toolkit. It's very good. I'll wait
rmage said:
Link2SD doesn't link app data, do you have any option?
Click to expand...
Click to collapse
I'm not sure whether the stock kernel of our devices supports init.d, thus supports CronMod/Data2SD. Lenovo locked our bootloader, and currently there's no way around it. So I personally think, Link2SD method are the best option for now.
Let's give it several months until our dev gurus bring their miracles upon this device
The attached image shows mt6577 Hardware, can u provide the Soc details please
Hi, Can any one upload Lenovo ideatab A1000 system.img
in step 20, it appears you are writing to a /bin directory on the android system. However such a directory is not visible either through shell or the system telnet account.
Do I need to understand something else about android to make sense of this.
regards
vidya
one month gone past but the op seems to be in caves or has bricked the device
STOCK ROM
CAN ANY BODY PROVIDE ME A STOCK ROM OF THIS DEVISE
I HV ROOTED SUCCESSFULLY BY A VERY EASY METHOD
BUT SCREWED UP WHILE UPDATING IT SO PLZ PLZ HELP ME OUT
THE DEVICE BOOTS BUT ALL THE APP CRASHES :crying::crying:
VR.gtmini said:
The attached image shows mt6577 Hardware, can u provide the Soc details please
Click to expand...
Click to collapse
VR.gtmini said:
one month gone past but the op seems to be in caves or has bricked the device
Click to expand...
Click to collapse
sorry to make you wait. I'm a last grader university student, and final project stuffs have got me pinned down. Hope you understand
Actually the SoC is MT8317. For some god-knows reason Mediatek have made this SoC with signatures similar to MT6577. But somehow CPU tweaker correctly detects the SoC (MT8317). Maybe it's the CPU-Z bug?
unknown_world said:
Hi, Can any one upload Lenovo ideatab A1000 system.img
Click to expand...
Click to collapse
zod0070 said:
CAN ANY BODY PROVIDE ME A STOCK ROM OF THIS DEVISE
I HV ROOTED SUCCESSFULLY BY A VERY EASY METHOD
BUT SCREWED UP WHILE UPDATING IT SO PLZ PLZ HELP ME OUT
THE DEVICE BOOTS BUT ALL THE APP CRASHES :crying::crying:
Click to expand...
Click to collapse
I'm uploading the modified .img. Let's pray my old HSPA modem won't catch fire by the morning.
vidyadhara said:
in step 20, it appears you are writing to a /bin directory on the android system. However such a directory is not visible either through shell or the system telnet account.
Do I need to understand something else about android to make sense of this.
regards
vidya
Click to expand...
Click to collapse
I think you got it wrong. The write process does not take place on the device. It's on the loop-mounted .img in /mnt/a1000 on your computer (step 18-19). Cheers!
Here's the ALREADY BUSYBOX-ED .img for Ideapad A1000-G 4GB EDGE version. Hope it helps :
www dropbox com/s/rmpnz7c285t5sqz/system.7z
sammymaddog said:
Here's the ALREADY BUSYBOX-ED .img for Ideapad A1000-G 4GB EDGE version. Hope it helps :
www.dropbox.com/s/rmpnz7c285t5sqz/system.7z
Click to expand...
Click to collapse
Thanks for coming back, could u post the MD5 of the system.7z & system.zip.
Also could u provide simple way/steps to directly flash this .img without extracting existing stock system image
My tab A1000-G
do you have stockROM for lenovo A1000G
I need this :crying:
raffly said:
do you have stockROM for lenovo A1000G
I need this :crying:
Click to expand...
Click to collapse
Don't worry, the above link is a stock Lenovo A1000 G ROM, but with pre-root files having no superuser app. Just extract the .7z file
System.7z MD5: 658CA71AC8A230B244F267513857F9A5
I'm a daily Linux user and don't have installed Windows on my PC.
So I would like to ask first how to backup my X720 phone into my Linux PC? Then install root and new custom rom using the same OS?
Before I had Samsung phone and was using application called Heimdall in Linux, similar like Odin for Windows.
Is there any similar app for Le Eco or can I use commands in Terminal?
https://www.xda-developers.com/install-adb-windows-macos-linux/
https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
Follow the links above, all you really need is adb. There are some Chinese Windows recovery programs and scripts for certain variants of the Pro3 (like the x722 and the x720) but you probably won't need to use them unless you catastrophically brick the phone somehow. As long as you're following instructions from ROM threads properly, all you'll ever need is adb and the rest you can do through your phone via TWRP or Magisk or whatever.
Well there is one additional hangup...the phone will not appear in "adb devices" at least on Linux Mint/ubuntu...the solution is as follows.
sudo apt-get install android-tools-adb android-tools-fastboot
tar -jxvf lepro3.tar.gz
cp abd_usb.ini /home/<your username>/.android
sudo cp 51-android.rules /etc/udev/rules.d
sudo killall adb
sudo adb devices
Basically you are manually adding the vendor id so adb can find it. Plan on having to use sudo in front of any adb or fastboot commands to avoid possible errors.
It should then find the device and you can follow a tutorial like the one here: https://docs.google.com/document/d/1qFJ7ULjU57XSkm-j8P9vDbnV1JU1YZYQS70StWRlrbo/edit?usp=sharing
I did not create this. It's a copy of the one created by Abel408 on slickdeals but I used it to take my factory phone and install omnirom about 5 days ago on linux.
famewolf said:
Well there is one additional hangup...the phone will not appear in "adb devices" at least on Linux Mint/ubuntu...the solution is as follows.
sudo apt-get install android-tools-adb android-tools-fastboot
tar -jxvf lepro3.tar.gz
cp abd_usb.ini /home/<your username>/.android
sudo cp 51-android.rules /etc/udev/rules.d
sudo killall adb
sudo adb devices
Basically you are manually adding the vendor id so adb can find it. Plan on having to use sudo in front of any adb or fastboot commands to avoid possible errors.
It should then find the device and you can follow a tutorial like the one here: https://docs.google.com/document/d/1qFJ7ULjU57XSkm-j8P9vDbnV1JU1YZYQS70StWRlrbo/edit?usp=sharing
I did not create this. It's a copy of the one created by Abel408 on slickdeals but I used it to take my factory phone and install omnirom about 5 days ago on linux.
Click to expand...
Click to collapse
Hello
I'm new in this community and me too, I have a LeEco Le Pro 3, never flashed, so it has the new updates of EUI 5.9s and all chinese apps.
I'd like to put this ROM
Me too, I'm a linux user, I've Ubuntu 16.04 LTS
Before I never flashed a phone, so I don't know how to do well even if I read a lot of procedures, but all for Win.
How do to the same with my OS?
I'd prefer to follow a complete list of instructions not to make errors and problems to my phone.
I've a LeEco Le Pro 3 (X720) original and never flashed, with 6GB of RAM, and 64GB of memory
Thanks to who wants to help me accurately
Hello,
no one could help me?
Is there no solution for Linux users? How is it possible?
spsturbo said:
Hello,
no one could help me?
Is there no solution for Linux users? How is it possible?
Click to expand...
Click to collapse
In short install ADB&fastboot tools, reboot to bootloader, unlock it via fastboot, flash TWRP, boot into TWRP, do a factory reset, flash your ROM, you're done
BlueFlame4 said:
In short install ADB&fastboot tools, reboot to bootloader, unlock it via fastboot, flash TWRP, boot into TWRP, do a factory reset, flash your ROM, you're done
Click to expand...
Click to collapse
And in more detailed manner?
Could you list the exact commands to type on the terminal?
spsturbo said:
And in more detailed manner?
Could you list the exact commands to type on the terminal?
Click to expand...
Click to collapse
Whoa, no offense but I don't have time for that. Just search for each of these things and you will find an answer. I will also answer specific questions but I don't like unspecific ones like "post the whole process please".
spsturbo said:
And in more detailed manner?
Could you list the exact commands to type on the terminal?
Click to expand...
Click to collapse
Just google it and you will find all that you need.
spsturbo said:
And in more detailed manner?
Could you list the exact commands to type on the terminal?
Click to expand...
Click to collapse
https://ubuntuforums.org/showthread.php?t=2326450
famewolf said:
Well there is one additional hangup...the phone will not appear in "adb devices" at least on Linux Mint/ubuntu...the solution is as follows.
sudo apt-get install android-tools-adb android-tools-fastboot
tar -jxvf lepro3.tar.gz
cp abd_usb.ini /home/<your username>/.android
sudo cp 51-android.rules /etc/udev/rules.d
sudo killall adb
sudo adb devices
Basically you are manually adding the vendor id so adb can find it. Plan on having to use sudo in front of any adb or fastboot commands to avoid possible errors.
It should then find the device and you can follow a tutorial like the one here: https://docs.google.com/document/d/1qFJ7ULjU57XSkm-j8P9vDbnV1JU1YZYQS70StWRlrbo/edit?usp=sharing
I did not create this. It's a copy of the one created by Abel408 on slickdeals but I used it to take my factory phone and install omnirom about 5 days ago on linux.
Click to expand...
Click to collapse
Thank you for your great help! I tried this but it still didn't recognized the device if you use the command "adb devices", instead you need to use "fastboot devices" and add to your file USB id for fastboot.
First you need to find your USB id number by running phone in fastboot mode and use command "lsusb" in terminal. Here are instructions: https://android.stackexchange.com/questions/144966/how-do-i-get-my-device-detected-by-adb-on-linux
Then put those number into your two files:
Put in "adb_usb.ini" your first ID number in my case
Code:
0x18d1
(Don't root directory /home/USERNAME/.android)
for opening file 51-android.rules in /etc/udev/rules.d you need to use root and put this inside:
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d00d", MODE="0666", GROUP="plugdev", SYMLINK+="android"
In the end restart the udev service in terminal "service udev restart" and restart the ADB server: adb kill-server && adb start-server. Disconnect and reconnect the device again.
For recovery used this tutorial: https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560
I was unable to get info from
Code:
fastboot oem device info
, but manage to unlock the bootloader:
Code:
fastboot oem unlock-go
and successfully installed Lineage 15.1 OS.