Related
Hi all.
I've bought a XDA IIi the XDA shows an orange/red blinking light when charging it trought a USB Cable to PC. According to the manual, it should be an amber solid led when charging it. The only solid led I've seen is a green one on the charger.
I'm available to sync trought ActiveSync, but XDA shows an orange/red blinking light and one post talking about that blinking orange led was caused by a low-power charging, but i use USB Cable to PC.
I always use USB to PC cable and charge my XDA phone.
I have exactly the same problem, any solutions?
Me too, same problem but additional headache no charge via usb nor wall charger. It also blinks on original wall charger also, set off charging also. its frustrating ARRRRGH.
Need solution badly
mine too
mine does it too but only once in awhile and if i soft reset my phone it goes back to charging like i listen to music and its charging and then suddenly the stupid orange light blinks and doesnt charge my phone and its annoying?
anyone have a solution?
The problem might be a near-dead or malfunctioning battery. Using a USB cable to charge does not fully charge a near-dead battery, and sometimes if the battery has completely discharged, the cable will not charge it.
Another solution...
I'm having the same problem... When i plug the usb connector the amber LED turn's on and hold. After some time the LED start to blink. When the led is blinking the battery doesn't charge.
There are some "software based" solution, or a debuging tool???
The orange led is normal that's how it is when it is in charging mode but the blinkink led is becouse of the conection with the phone and the USB try to move the USB in the phone plug it might work cuz it workd for me.
I hope i help'd u guys
What kind of move? Do you think that the problem is a bad electric contact? I guess not... I pluged and unpluged several times...
Well it workd for me becouse if i plug the usb cable to the end it has no connection that's way i move the cable back and forth untill i get the connection.
Blinking amber
I have the same problem on my htc p3300, and when i used batti 2.4 i saw that the battery temperature is 432675.5 etc something fake temerature. This is the reason, why my pda unable to charge my battery. If you set your pda in bootloader mode, it will charge your battery!. After 3 or more times i charged it in bootloader mode somethimes the battery temp sensor works normally, and the charge is working as well. Sometimes not.
Bat you can charge your battery allways in bootloader mode.
Sorry for my English.
Try it!
Good luck!
???
smalll said:
I have the same problem on my htc p3300, and when i used batti 2.4 i saw that the battery temperature is 432675.5 etc something fake temerature. This is the reason, why my pda unable to charge my battery. If you set your pda in bootloader mode, it will charge your battery!. After 3 or more times i charged it in bootloader mode somethimes the battery temp sensor works normally, and the charge is working as well. Sometimes not.
Bat you can charge your battery allways in bootloader mode.
Sorry for my English.
Try it!
Good luck!
Click to expand...
Click to collapse
does it show any indication while charging in bootloader mode???
Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.
Hi guys,
Suddenly facing a strange problem since last night.
My x10i was running out of charge & i connected to the comp to charge while i was working. I noticed the charging speed was extremely low, so i restarted the phone to see if it would help. Did not.
Thought there is some problem with the cable, used a different cable as well, but no use.
The slow charging had stopped and eventually the phone died.
Tried connecting to the socket & charging, still no use.
The red led blinks when i connect the phone to a charger via the usb or the socket.
needless to say the phone does not even boot up now, obviously for no charge...
any ideas wat maybe wrong or wat i could do ?
please advice
Have you tried to let it charge for some time in off mode? As long as your battery is not dead, and the phone get the right voltage through the USB connector it should charge in an "emergency mode". This is a slow way of charging, but allows for charging without any electronic circuits to monitor it, it is not the same as the charging screen that usually displays when you connect the phone while it is powered off. Usually when a phone is completely discharged it needs to be connected at least 15 min, sometimes a lot longer, before the electronics kicks in, and starts the speedcharging.
My best advise would be to connect it to the mains charger, or a USB port you KNOW supplies power. Some laptops cut down on the powersupply to the USB ports when they run on battery. Let it be connected for a long time (several hours), and then try to power it on again.
If that does not help three things can be wrong
1. Somewhere the USB connection is broken, either in the cable or in the connector on your phone (or on the PC's connector, but that is less likely).
2. The battery is dead, modern batteries contain circuits that actually disables the battery when any given parameters gets outside the defined limits. This is to prevent the battery catching fire. On some batteries this renders the battery useless, and you need a new battery.
3.) The mainboard of your phone is dead, and hence nothing works, can be ruled out if you can borrow a battery from someone to test if your phone works then.
I hope a good and long charge can sort out your problem, that is the easiest fix, and it is free.
Hi O_K,
well, i have been charging (or trying to) the phone since it died last night.
i have used different chargers & different modes of charge (through the system & the wall socket) - no joy at all.
the LED blinks red a couple of times when connected.
Very occasionally, the SONY ERICSSON logo (startup) shows on the screen & it switches off again, back to the blinking.
So charging for a long time & through different chargers has not helped.
gonna try a different battery now to see if that can help.
Thanks for your response!
well, tried switching chargers & batteries.
The problem seems to be with the charging unit on the phone (USB)
with any charger or battery, wen connected the led blinks (like wen the phone is charging), but there is no charge happening.
eventually the phone dies, even if charging
any ideas?
There is a thread some where in this forum for fixing the same problem you have...I don't remember the exact name of the thread..if I find it I'll post the link here..Anyways what the guy did was
-Pull the battery out and connect the charger till the led turns green.
-put in the battery now and charge the phone...
and I think that was it.
Hope it helped..
EDIT: Found the link.
http://forum.xda-developers.com/showthread.php?t=944322
So my 16gb Asus Transformer has a very strange problem. I have not seen it mentioned anywhere. When I plug my unit into the supplied charger there is NO indication on the device that it is charging. It takes about 10 hours to fully charge.
Here is the really strange part... When I put the device into the keyboard dock, I get a charge symbol on the battery and it says charging. To make things even more strange the cable and wall wart provided with the tablet quick charges the keyboard dock, light is red then turns green when fully charged (no longer then 2 hours so far).
How could the charger charge the dock no problem but not charge the unit itself? My thoughts were that the dock may seat farther into the tablet then the cord does so I took a small file and took off a little of the plastic on the eee pad connector side, that did not help at all. Any ideas?
I have flashed the latest software update, and I have done a "Factory Data Reset" and it will still not "quick charge" from the supplied charger, only from the dock.
ThePCTech
I got the same problem,i don't have the dock.I see a hole next to the camera but when i charge it there is no light,WTF
sj408 said:
I got the same problem,i don't have the dock.I see a hole next to the camera but when i charge it there is no light,WTF
Click to expand...
Click to collapse
I must admit that I expected to see a charging light on the pad itself, I think the hole you mention may be the light sensor.
When I use the official charger, I get a lightning bolt symbol and it charges fairly quickly. When I used my Kindle charger or an HTC one and plugged the USB into them, I had no indication it was charging and it was really REALLY slow...
Mr.Clark said:
When I use the official charger, I get a lightning bolt symbol and it charges fairly quickly. When I used my Kindle charger or an HTC one and plugged the USB into them, I had no indication it was charging and it was really REALLY slow...
Click to expand...
Click to collapse
The ASUS charger is rated @ 15V 1.2A. Most USB chargers are 5V. USB itself is rated @ 5V. So I donno how it can use 15V via USB. I tried several different chargers with much higher amperage but no luck at all. Quite strange I must say.
Let me clarify, The ASUS Eee Pad has no charging lite on the unit itself. The only indication is in the taskbar on Android 3.0.1. The battery will change from a green battery symbol to a green battery symbol with a lightning bolt on it when it is "Quick Charging".
There are two ways that the device charges, the first is a quick charge (with lightning bolt on batt. symbol), the second is a slower trickle charge (no indication). A quick charge should take about 2 - 3 hours to fully charge. The trickle charge will take up to 12hrs. The ONLY two ways to get a "Quick Charge" is 1. To use the provided charger (came with the unit), and 2. Is to put it in the dock. A trickle charge can be done with ANY other USB port (ie. laptop, desktop, iPod AC adapter, ect.).
My ASUS Eee Pad Transformer will ONLY "Quick Charge" with the dock. The cable provided with the unit will NOT "Quick Charge" my device.
Anyone else have this? If so do you have a fix?
ThePCTech
FIXED!
Ok, so here is the deal...
I ordered a 32gb version and I'm givving the 16 version to my wife. I tried the new plug in the old tablet and the same thing happened. So I thought it MUST be the tablet and NOT the charger as I thought it was.
Looking into the bottom of the tablet I noticed a pin that looked like it was bent. If you look into the socket with the screen facing up. The 4th or 5th pin was bent up and not sitting in the track like it should have been. I compaired this to the new 32gb version. I used a needle to gently move it into place and tried again and it charged as it should with both cables. Newegg offered to replace the unit, but everything else works great on it and, now it chages just fine. I'll just keep it.
ThePCTech
If anyone else is having a problem take a look into the socket of the tablet, it could be a quick fix.
i fixed my charging problem by doing a factory reset.........wow...
Same problem
I have the exact same problem, but mine didn't start until I applied an update from asus.
I think I may have *had* the same problem. I returned my transformer to sears after it would not charge. After my return a clearance sticker was placed on it and now after reading this thread I am considering repurchasing the transformer and getting a new adapter. But I am concerned that it may be something wrong with the tablet itself. This thread leads me to conclude it is the former. But what do you think?
I was not able to charge through the adapter - however, when connected through the USB cord my laptop did recognize it. I did not leave it connected for longer than 10minutes -I guess if i left it in for 12hrs plus I would have a conclusive answer - but to late for that now..
I got the tablet today -it had 5% battery and after trying three outlets it shutdown- it would restart and not get past the homescreen (which had the time and stated to connect the charger and the lock) it would then shutdown.
In the 20 minutes I was able to use my transformer it worked great
sj408 said:
I got the same problem,i don't have the dock.I see a hole next to the camera but when i charge it there is no light,WTF
Click to expand...
Click to collapse
The "hole" next to the camera is the light sensor.
thepctech said:
So my 16gb Asus Transformer has a very strange problem. I have not seen it mentioned anywhere. When I plug my unit into the supplied charger there is NO indication on the device that it is charging. It takes about 10 hours to fully charge.
Here is the really strange part... When I put the device into the keyboard dock, I get a charge symbol on the battery and it says charging. To make things even more strange the cable and wall wart provided with the tablet quick charges the keyboard dock, light is red then turns green when fully charged (no longer then 2 hours so far).
How could the charger charge the dock no problem but not charge the unit itself? My thoughts were that the dock may seat farther into the tablet then the cord does so I took a small file and took off a little of the plastic on the eee pad connector side, that did not help at all. Any ideas?
I have flashed the latest software update, and I have done a "Factory Data Reset" and it will still not "quick charge" from the supplied charger, only from the dock.
ThePCTech
Click to expand...
Click to collapse
Your unit is working correctly. There is no charging indicator on the tablet only on the dock. The tablet show charge status via software in the lower right corner of the display or in setup which will show percentage.
When you connect the unit to the dock, the tablet is charged via the batteries in the dock. The goal is to ensure that tablet is as charged as possible so you can undock and go knowing the tablet is charged. The charging from the dock to the tablet will only occur if the tablet is below 97%. The indicator light on the dock only refers to the charge status of the battery on the dock, not the tablet.
Someone referenced the little light on the front next to the camera, that is not a light. It is an ambient light sensor for the tablet.
The colors for the charge light indicator on the dock are documented in the manual. As I remember it they are <10% quickly flashing orange, 10-50% slowly flashing orange, 50-95% orange, 95%+ green.
I am also having charging problems with my Transformer.
Everything seems to work fine when I used the supplied charger and the USB plug, both with dock and with just the transformer itself.
However I'm presently away and only took the USB cable with me. I've plugged the USB cable into my travel multiplug, which has a usb slot as well and I'm getting no charge at all, either on the dock or the transformer itself. Also the battery is showing that it is actually draining, even while connected to the multiplug. I've also tried connecting both the dock and the transformer to my juicepack (rated at 3.7V, 4,800mAh), but no luck with that as well.
Anyone else had these problems?
Sent from my Transformer TF101 using XDA Premium App
The Transformer will only charge by USB using the supplied wall adapter. Not sure why that is, but that's been my experience.
my problem too.. I got mine yesterday and updated the software straight away. it charged all night and charging worked on both the pad itself and the keyboard.
today it doeasnt..
the cable and the sockets are fine (my pc sees it and did some file transfers) so hardware seems ok. the charger gets quite hot though. does anybody experience the same? maybe its the charger? I wonder if factory reset would help...
browngeek said:
I am also having charging problems with my Transformer.
Everything seems to work fine when I used the supplied charger and the USB plug, both with dock and with just the transformer itself.
However I'm presently away and only took the USB cable with me. I've plugged the USB cable into my travel multiplug, which has a usb slot as well and I'm getting no charge at all, either on the dock or the transformer itself. Also the battery is showing that it is actually draining, even while connected to the multiplug. I've also tried connecting both the dock and the transformer to my juicepack (rated at 3.7V, 4,800mAh), but no luck with that as well.
Anyone else had these problems?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
the wall plug that came with the TF is rated for 5V-15V, 2-12A. This is a lot higher than normal USB, which is 5V,1A max. When you plug it into a normal USB jack, you are only in trickle charge mode, and i think it's only with the screen off.
Hi,
Motorola Defy (MB525) with CyanogenMod 7.2 stable, original battery.
I bought it almost two years ago second handed, it should have now around three years.
Using the original wall charger, it does not charge the phone anymore.
The log shows a lot of lines like
Code:
I/usbd ( 1048): main(): Spurious Cable Event, Ignore
I reboot the phone but it didn't change anything.
I change cable and charger and the behaviour is the same.
The wall charger charges good other phones.
Now the phone is completely discharged.
I plugged in the wall charger and the led turns on white, the os starts but it turns off after few seconds.
Now I'm using a usb cable connected directly to a computer and the phone is off, only led white on.
After a while (5-10 minutes) the phone turns automatically on, it starts normally. But the phone doesn't see the charger.
Plug out the cable and plug in again (connected to the pc).
Now it's charging, but after a while (a couple of minuts) it turns off and there's only the white led on.
After a while (5-10 minutes again) the phone turns automatically on, it starts normally. The phone sees the charger (red led on), but it seems to me, that the charging rate of the bar is way too fast.
Some time ago (1-2 months), it happened something similar, but the phone was charging with the usb cable connected to the laptop.
After that the wall charger charged the phone. A couple of times it didn't work but I charged the phone via usb pc and later the charger was working again.
No visible damage to the micro-usb port of the phone.
The question is, is it the battery or (as I suspect) is the electrical part / usb problem of the phone?
If so, what is a reasonable expected cost of repair (I'm in Germany)... I'm afraid that it will cost more than 50€... then, is it better to move to another phone?
Thank you very much,
Giuseppe
[EDIT]
The charging rate (with the usb cable connected to the pc) is normal. The phone is working normally
gmcgmc said:
Hi,
Motorola Defy (MB525) with CyanogenMod 7.2 stable, original battery.
I bought it almost two years ago second handed, it should have now around three years.
Using the original wall charger, it does not charge the phone anymore.
The log shows a lot of lines like
Code:
I/usbd ( 1048): main(): Spurious Cable Event, Ignore
I reboot the phone but it didn't change anything.
I change cable and charger and the behaviour is the same.
The wall charger charges good other phones.
Now the phone is completely discharged.
I plugged in the wall charger and the led turns on white, the os starts but it turns off after few seconds.
Now I'm using a usb cable connected directly to a computer and the phone is off, only led white on.
After a while (5-10 minutes) the phone turns automatically on, it starts normally. But the phone doesn't see the charger.
Plug out the cable and plug in again (connected to the pc).
Now it's charging, but after a while (a couple of minuts) it turns off and there's only the white led on.
After a while (5-10 minutes again) the phone turns automatically on, it starts normally. The phone sees the charger (red led on), but it seems to me, that the charging rate of the bar is way too fast.
Some time ago (1-2 months), it happened something similar, but the phone was charging with the usb cable connected to the laptop.
After that the wall charger charged the phone. A couple of times it didn't work but I charged the phone via usb pc and later the charger was working again.
No visible damage to the micro-usb port of the phone.
The question is, is it the battery or (as I suspect) is the electrical part / usb problem of the phone?
If so, what is a reasonable expected cost of repair (I'm in Germany)... I'm afraid that it will cost more than 50€... then, is it better to move to another phone?
Thank you very much,
Giuseppe
[EDIT]
The charging rate (with the usb cable connected to the pc) is normal. The phone is working normally
Click to expand...
Click to collapse
Try buying a new battery/cable/charger from eBay. You will have a new phone for less than $10.
You can also install another rom.
leonardoporro said:
Try buying a new battery/cable/charger from eBay. You will have a new phone for less than $10.
You can also install another rom.
Click to expand...
Click to collapse
Did you read the full message?
I change cable and charger and the behaviour is the same.
Click to expand...
Click to collapse
The rom should not be the issue, as it was previously working (for more than 1 year) and otherwise would be a common problem, unless you're more specific...
Anyway in this moment everything is working good... but I expect that at some time I will have the same behaviour... that is phone not charging with any wall charger but charging through a computer.
If so, I will try then to make some other tests (I read somewhere to try to deactivate usb debug mode) and I'll report.
Giuseppe