Database Users

[FIXED]cannot install NAND roms anymore[FIXED]

Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I got this when I first installed the standard DFT ROM, i found that by remving the accept USB connections in activesync resolved it and I was able to install. I then tried to install a different ROM and failed, I tried another and the same. I was initally getting RAPITOOL errors, dll not found. Reinstalled activesync and I am not getting those errors anymore but ROM still wont install. With error above.
Reinstalled Mag ok so bootloader installs still ok, anyone any ideas?
FECK, my NAND Android build has gone as well...

What helped for me:
- If USB is connected: right click on USB -> safely remove MAGLDR USB device
- remove MAGLDR USB driver from PC
- restart pc
- connect phone again via USB and let driver install
Should work fine again now. Guess something can go wrong in the USB driver sometimes.

mag does not show up as a device to remove, i will reboot and try again.

I think activesync reinstall resolved it as it worked after a rebooted, didnt reboot prior to that, thanks for your help anyway.

I spoke to soon, well managed to flash another ROM, didnt like it so flashed again, got half way through and then came up with error again, tried again, back to square one. Anyone ideas what is causing this?

rebooted, still the same, reinstalled activesync and rebooted, all ok again. Why is activesync required, cany anything else be used, anyone any idea what is happening here?

you can install magldr, radio or roms with ruu in 3 color mode in hspl...
get there with wol down key and end call button pressed
when magldr is already installed boot up your phone with pressing end call button until magldr menu appears
and then start you android flashing procedure the way cotulla explained it!
I had the 723 error too and what helped for me was executing the daf.exe with password secured admin rights (your profile on computer has to have admin rights and has to be password secured)

t3g said:
you can install magldr, radio or roms with ruu in 3 color mode in hspl...
get there with wol down key and end call button pressed
when magldr is already installed boot up your phone with pressing end call button until magldr menu appears
and then start you android flashing procedure the way cotulla explained it!
I had the 723 error too and what helped for me was executing the daf.exe with password secured admin rights (your profile on computer has to have admin rights and has to be password secured)
Click to expand...
Click to collapse
Hi, thanks for info but I am passed that point. I have already installed mag and tested my first ROM, I am having this problem when trying to flash new ROMS. I have now go another ROM on by reinstalling activesync and rebooting again, I am hoping someone is aware of this issue and let me know how to resolve it as I dont want to have to go through this rigmarole everytime I want to flash - as I am still at the stage of settling on a ROM and are trying all the current set.

In a much happier place right now. don't have to stress over winmo 6.5 anymore. Thank you all for your help. Lovin' Android on my HD2. So fast.

Try this http://forum.xda-developers.com/showthread.php?t=918698

And this might be helpful, too

deckoff said:
And this might be helpful, too
Click to expand...
Click to collapse
cheers but problem now solved after using android_install.exe rather than daf.exe

Bootloader not detected at PC

Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help

install windows mobile device center to your pc.otherwise it doesn't recognize it.

I have installed WMDC. But it doesn't recognize it at all.

but cwm isnt flashed from bootloader? r u using magldr or clk?

MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing

try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)

after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see

[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks

Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable

After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?

Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App

Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.

mobile device center

I have CMYLXGO's Topia HD-NAND Edition on my hd2.
The problem that I am having is that Mobile device Center does not show my phone when I connected to the usb.
can anyone help me?
Thanking you in advance,
Henry

Isn't mobile device center for windows mobile only?
You're on Android, why do you want to connect ti WMDC anyway?

Yeah, you don't have a WMo phone anymore, so to say.
If you want to connect to the PC, try USB mass storage.
If you need any help, just let me know.

Ok, so how can I change differents roms if my phone does not sync. with my pc, I used to able to do it, now for some reason I can't.
thank you for yor reply,
Henry

It depends on what room are you using?
If you are using magldr, clk or you are just flashing through clockworkmod.
For every type of bootloader there is a way to enter the flashing menu.
Just tell me what rom (and what type of bootloader) are you using and I'll tell you what to do.
-----------------------------------
HTC HD2
ACA GB 237 CM7
kernel 2.6.32.15
NAND Android ROCKS!

As a relative noob myself I recommend either HD2 tools or easyandroid, the latter being easy to use and explains every step of the process as you go and confirms you have correct radio, magldr HPSL ect already installed.
If you are looking for a good ROM, Team Blue Droid have produced an excellent sense 3.5 Rom which looks the business and works far better than many others I have flashed recently on mh EU HD2. I am not that technically minded regarding SD card partition types, but I run mine via SD card after flasing a 1024 partition using CMR and the accompanying DAF.exe.
From reading many threads I understand camcorder is less than perfect on most roms at highest res.
link is below
http://forum.xda-developers.com/show....php?t=1275119

Try it with "HTC Sync" (download 4free) instead of mobile device center.

kikimax said:
Ok, so how can I change differents roms if my phone does not sync. with my pc, I used to able to do it, now for some reason I can't.
thank you for yor reply,
Henry
Click to expand...
Click to collapse
if yo uare flashing DAF roms the nyou go intothe bootloader and flash
most roms these days are CWM based and you install themn via zip file from the sd card no need for the computer

Ok, let me try to explain myself better so you can try to help me, thanks.
I did install the magldr 1.13 on my phone, when I plugged the phone to my pc for the first time it showed that it was intalling the driver and that went ok, my problem is that I don't see my phone on the screen so if I want to flash another rom how do I know that my phone is comunicating with my pc, my friend tells me that the minute he plugged he's phone to his pc, he sees his phone on the screen.
Can you help me?
Thanking everyone in advance,
Henry

have you tried removing and reinstalling wmdc? once just because of that i had to format my pc

1. You need to enter magldr bootloader, just reboot the phone and hold the on/ off key until you get on the magldr options screen. With your usb plugged in, scroll to usb flasher and confirm the option by pressing the call button.
Then open the rom you want to install in your PC and go for the flash. If the phone is not connected, then it shouldn't do anything. If it is, it will install.
2. Other option, from what I'm reading, I think your driver might not have been installed properly.
Try connecting the phone to other PCs. And do the usb flasher thing.
Let me know if this helped.
Sent from my HD2 using my fingers.

[Q] Allright i think i screwed up

After a few months i decided to try out the Sense 3.5 SensationXL rom and i screwed up because i forgot a thing or two.
I went to (8) AD Recovery and did a "wipe data/factory reset" and also wiped the dalvik cache and then formatted by sd card through the pc once i realized it still had data on it.
Now my phone doesn't have a rom but still has magdlr and cwm but doesn't recognize when i connect the usb (i assume the driver got deleted) in the 4 colour screen or either in (4) usb mass stg.
so how do i get the phone back to work ? i cant even do task 29 and start from the beginning because my pc doesn't recognize when i connect my phone through the usb.

Hmm do you have active sync installed on your PC. You need to have it to use the boot loader.

GhostXSeries said:
Hmm do you have active sync installed on your PC. You need to have it to use the boot loader.
Click to expand...
Click to collapse
i think so.
i'll download and install it to be on the safe side.

Sorry my bad. I thought you were talking about the boot loader ( tri colour screen. ) You could try downloading the google drivers from here: http://forum.xda-developers.com/showthread.php?t=905060 This is Tytungs post. Look half way down the page and download Google_usb_driver_r4.zip. That shoud allow you to install the drivers and let you talk to magldr.

i downloaded the windows mobile device center!
i had formatted my pc in october so i forgot about that and thats why my pc wasn't recognizing it.
i did a task 29 and installed magdlr, cwm again and partitioned the sd card and installed the rom. All working fine now!
Your first post was what reminded me to download windows mobile device center
thank you!

Not a problem glad I could help

[Q] HTC HD2 bricked, no tri color bootscreen

Hey guys.
I have a bricked HTC HD2 here. I installed Android 2.2 on it, and it ran fine for a long time. But a few days ago, it got stuck in a bootloop. It gets stuck on the Android logo and doesn't get past that point at all.
What I've tried (in chronological order):
1. AD Hardreset from aMAGLDR: erased all data, but didn't fix the problem. Kept going in bootloop.
2. AD Recovery: Failed. Doesn't get past the "GO GO GO!!"
3. Repair aMAGLDR using HD2 NAND toolkit: tried repairing (150MB partition size) and installing Clockwork Mod (150MB). Same exact results when trying to get into AD recover. Only diffrence is that I now don't have a ROM on my NAND anymore.
4. Install a diffrent rom: Tried a few of them, but they all keep getting stuck on their bootlogo (HTC, Android, ...).
5. Restore STOCK ROM WM6.5: I'd love to, but I can't get into the three-colors-bootscreen. It goes straight to aMAGLDR, even when I boot holding the right buttons (volume down + power [both short click and long hold]). I had set up the ROM files correctly on the SD card.
6. Install the STOCK ROM using the HD2 NAND TOOL: after going to USB Flash mode and installing the default microsoft drivers (it didn't want to accept the Google Android drivers or HTC drivers I downloaded earlier), the flash utility keeps getting stuck on ERROR 264: CONNECTION. The only thing I can do in the HD2 NAND UTILITY is repair aMAGLDR. Other options result in the same error. Task29 can't find the phone either.
Bottom line, I cannot (ABSOLUTELY not) get into the tri color boot screen. It sends me straight to magldr. Also, my volume buttons are working just fine.
I really don't know what to do anymore. I hope someone can help me, any help would be greatly appreciated

Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button

powerofthink said:
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
Click to expand...
Click to collapse
Did you even read the OP's post, clearly I think not. The OP says several times that they can not get the device to the multicolor WINCE bootloader.Without being ably to boot into the bootloader they can notflash via SD card.
At the OP you can stop trying to flash via USB flasher in MAGLDR, it is only for flashing Android RIMs, WP7 ROMs, and Custom Android recoveries. If you are positive your volume down button works then you probably have some bad NAND blocks, but that is just a guess, with out access to the bootloader you are pretty much only left with flashing Android or WP7 via USB flasher in MAGLDR.

That's problematic... The HD2 NAND utility can't flash any ROMs, since the utility can't find the device (error 264).
I've tried 8 diffrent ROMS (from http://android.hd2roms.com/) by putting them on the SD card and use the "AD SD boot" function, but none of them can get past their bootlogo... All ROMs keep hanging on HTC / Android logos. Some of them used to work in the past, I recall...

Here, try these fixes and read the WHOLE POST :
http://forum.xda-developers.com/showpost.php?p=21725062&postcount=7

Thanks for the link. Unfortunately, none of the solutions worked. The battery pins were indeed bent, but after putting them back in place, the problem persisted.
I left my phone powered down all night and tried booting it in bootloader this morning. It didn't work. So that rules out solution 3 awell.
I've even put it in the freezer for half an hour (solution 5), but nothing changed.. Browsed through the last thread aswell, but there was no stuff I haven't tried yet. I can't even start tetris, since it keeps hanging on a blank screen aswell

The guy in solution #4 was facing the same issue (I think).
Especially the second part of the solution, where he talks to the OP. Read it carefully, and check out the post and thread he referred to.

Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!

Lorre851 said:
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Click to expand...
Click to collapse
horayyy for the HD2 & for the guys that gave the solutions!

need information in case of not getting into the bootloader
how can I use the american android + USB flasher method to work for my hd2 if
I am not able to boot it,
can't soft/hard reset it,
can't get into the bootloader (using volume down + end key pressed).
I used android installed on SD card.
It is totally unresponsive for now. volumn keys worked perfectly when it is was working lastly !
Please tell what can bo done to it to get it working or where does the problem lies.

check your battery pins and also battery if it is charged.
and,
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card(formatted FAT32.)
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume or without press
Click to expand...
Click to collapse
and then you can try an android rom again..

Another solution?
I had the exact same problem. And I am under the impression that there is no solution for every case. But for me it worked to press the volume down button very softly. I tended to push the button as hard as I could, however when I only pressed the volume down button slightly it went straight to the triboot color.
Hopefully this works for some of you.

Can someone help?
Hi,I want to refresh post, becouse i have exact same problem - can't get to serial bootloader, and in MAGLDR i can use only the USB FLASHER option. If someone could tell me how to flash any new rom only through FLASHER ? Last thing i can say: my problem started from installing this app from google Play play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite (sry for that, but I can't post URL yet) it might messed up my kernel and i have no idea what to do.