mobile device center - HD2 Android Q&A, Help & Troubleshooting and Genera

I have CMYLXGO's Topia HD-NAND Edition on my hd2.
The problem that I am having is that Mobile device Center does not show my phone when I connected to the usb.
can anyone help me?
Thanking you in advance,
Henry

Isn't mobile device center for windows mobile only?
You're on Android, why do you want to connect ti WMDC anyway?

Yeah, you don't have a WMo phone anymore, so to say.
If you want to connect to the PC, try USB mass storage.
If you need any help, just let me know.

Ok, so how can I change differents roms if my phone does not sync. with my pc, I used to able to do it, now for some reason I can't.
thank you for yor reply,
Henry

It depends on what room are you using?
If you are using magldr, clk or you are just flashing through clockworkmod.
For every type of bootloader there is a way to enter the flashing menu.
Just tell me what rom (and what type of bootloader) are you using and I'll tell you what to do.
-----------------------------------
HTC HD2
ACA GB 237 CM7
kernel 2.6.32.15
NAND Android ROCKS!

As a relative noob myself I recommend either HD2 tools or easyandroid, the latter being easy to use and explains every step of the process as you go and confirms you have correct radio, magldr HPSL ect already installed.
If you are looking for a good ROM, Team Blue Droid have produced an excellent sense 3.5 Rom which looks the business and works far better than many others I have flashed recently on mh EU HD2. I am not that technically minded regarding SD card partition types, but I run mine via SD card after flasing a 1024 partition using CMR and the accompanying DAF.exe.
From reading many threads I understand camcorder is less than perfect on most roms at highest res.
link is below
http://forum.xda-developers.com/show....php?t=1275119

Try it with "HTC Sync" (download 4free) instead of mobile device center.

kikimax said:
Ok, so how can I change differents roms if my phone does not sync. with my pc, I used to able to do it, now for some reason I can't.
thank you for yor reply,
Henry
Click to expand...
Click to collapse
if yo uare flashing DAF roms the nyou go intothe bootloader and flash
most roms these days are CWM based and you install themn via zip file from the sd card no need for the computer

Ok, let me try to explain myself better so you can try to help me, thanks.
I did install the magldr 1.13 on my phone, when I plugged the phone to my pc for the first time it showed that it was intalling the driver and that went ok, my problem is that I don't see my phone on the screen so if I want to flash another rom how do I know that my phone is comunicating with my pc, my friend tells me that the minute he plugged he's phone to his pc, he sees his phone on the screen.
Can you help me?
Thanking everyone in advance,
Henry

have you tried removing and reinstalling wmdc? once just because of that i had to format my pc

1. You need to enter magldr bootloader, just reboot the phone and hold the on/ off key until you get on the magldr options screen. With your usb plugged in, scroll to usb flasher and confirm the option by pressing the call button.
Then open the rom you want to install in your PC and go for the flash. If the phone is not connected, then it shouldn't do anything. If it is, it will install.
2. Other option, from what I'm reading, I think your driver might not have been installed properly.
Try connecting the phone to other PCs. And do the usb flasher thing.
Let me know if this helped.
Sent from my HD2 using my fingers.

Related

can't install hspl 3

hello am kinda new to all this, i'm trying to install HSPL 3 so i can flash my hd2 with a rom.
I have it Synced with My Computer. I have t-mobile usaHTC HD2. I open up HSPL3 thing. Press next. And its says its trying to connect via USB. stays stuck on that, then gives me an error message?
what am i doing wrong?
I HAVE 2.10.000 on my phone i just bought it. CAN I STILL flash my phone to get a custom rom????
anybody please, 2.10 i hear there is nothing out yet for 2.10 ?
for hspl... (yes it supports 2.10.0000, , dont forget that much of what you are reading was written before hspl3 was released)
1 - dont use a front mounted usb port, use one around back of the pc, directly connected to teh motherboard, not through a hub or case mounted ports.
2 - be sure and right click hspl.exe and choose 'run as administrator
3 - boot into bootloader yourself (start with phone off, press and hold and keep holding vol down, tap and release power, , when get to coloured screen, release vol down, , thats bootloader, ,) connect to usb, when the word 'serial' becomes 'usb' run hspl (as administrator)
keep trying usb ports.
if you are trying to use a virtual box, for example on a mac, , , dont.
oh, and be sure to extract hspl.exe, dont run it from within the .zip file.
thanks sam i got it, i love you.. now just gotta flash to get the rom
samsamuel said:
for hspl... (yes it supports 2.10.0000, , dont forget that much of what you are reading was written before hspl3 was released)
1 - dont use a front mounted usb port, use one around back of the pc, directly connected to teh motherboard, not through a hub or case mounted ports.
2 - be sure and right click hspl.exe and choose 'run as administrator
3 - boot into bootloader yourself (start with phone off, press and hold and keep holding vol down, tap and release power, , when get to coloured screen, release vol down, , thats bootloader, ,) connect to usb, when the word 'serial' becomes 'usb' run hspl (as administrator)
keep trying usb ports.
if you are trying to use a virtual box, for example on a mac, , , dont.
oh, and be sure to extract hspl.exe, dont run it from within the .zip file.
Click to expand...
Click to collapse
sam hows it going? how do i install cookie tab? you can't flash it?
Cookies tab is a cab file which can be found in my sticky. And directions on how to install the cab can also be found in my sticky.
Sent from my HTC Desire using XDA App
ddgarcia05 said:
Cookies tab is a cab file which can be found in my sticky. And directions on how to install the cab can also be found in my sticky.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
i still don't understand? help please
i dont know what to do with the cab? i'm so confused? mm? sam? anyone?
cookies is a program, not a rom, so no, you don't flash it.
copy cookies.cab to your phone, browse to it in your phones file manager, click it to run it.
samsamuel said:
cookies is a program, not a rom, so no, you don't flash it.
copy cookies.cab to your phone, browse to it in your phones file manager, click it to run it.
Click to expand...
Click to collapse
i added it but i cant seem to see it on file manager? mm is their a specific place?
samsamuel said:
cookies is a program, not a rom, so no, you don't flash it.
copy cookies.cab to your phone, browse to it in your phones file manager, click it to run it.
Click to expand...
Click to collapse
got it thanks.
flashing HTC HD2 from TMOUS
Hey,
I'm new to this flashing as well...
I have a Tmobile US HTC HD2...
I installed the HSPL3 after getting the Windows Mobile Device Center...
It was installed successfully, but after that whenever I connect my HTC to my PC, I can hear the ding but my PC is not recognizing my device and there is no connected icon on the HTC as well.
Any help please...
sureshkgopalan said:
Hey,
I'm new to this flashing as well...
I have a Tmobile US HTC HD2...
I installed the HSPL3 after getting the Windows Mobile Device Center...
It was installed successfully, but after that whenever I connect my HTC to my PC, I can hear the ding but my PC is not recognizing my device and there is no connected icon on the HTC as well.
Any help please...
Click to expand...
Click to collapse
it may be connecting in disk mode.
settings menu all settings connection usb to pc.
make sure active sync is selected, and that faster data is NOT selected,.
I am having the same problem, i have tried the steps you gave but to no avail. i have tried every USB slot and tried a different cable. if i try and do it thru bootloader it does not change from serial to usb at all. any ideas? i have flashed roms before but lost my phone and my replacemnt is still running stock rom. ps i cannot even install the official HTC rom update to my phone. any help would be massivly aoppreciated as i am trying to get android on there for experimentation. Regards
thanks for the help!
Same problem..
leezx6r said:
I am having the same problem, i have tried the steps you gave but to no avail. i have tried every USB slot and tried a different cable. if i try and do it thru bootloader it does not change from serial to usb at all. any ideas? i have flashed roms before but lost my phone and my replacemnt is still running stock rom. ps i cannot even install the official HTC rom update to my phone. any help would be massivly aoppreciated as i am trying to get android on there for experimentation. Regards
Click to expand...
Click to collapse
Same here. I'm stuck i just want to update it to froyo 2.2. But i'm missin' this crucial step. Anyone fixed this issue yet?

[Q] Problems in trying to get htc hd2 w/WP7 back to android 2.2 PLease help

Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
michael8780 said:
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
Click to expand...
Click to collapse
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
zarathustrax said:
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
Click to expand...
Click to collapse
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Sounds like there's a problem with the driver. Reinstall windows media center and see if your phone is properly recognized by your pc.
Otherwise, you could try restoring winmo 6.5 directly via sd card. Google how to do this, as I'm replying using my phone and it's a tad difficult to search the guide for you.
michael8780 said:
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Click to expand...
Click to collapse
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
zarathustrax said:
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
Click to expand...
Click to collapse
hey guys, i have the same problems machael8780, win7 treats HD2 as a CDMA device.
and i cant get it into usb mode.
i entered MAGLDR(ver1.13), choose 5 usb flasher mode, and stop there.
after that i make hd2 into 4colors screen with use connected, and i reinstalled MAGLDR 1.13. the process is ok.
but i still cant get HD2 into usb mode successfully.
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
110718 said:
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
Click to expand...
Click to collapse
So when you guys go in to tri-color "serial" doesn't change to "USB"...
Sent from my LG-P999 using xda premium
No..doesnt...windows dont see sd...

[Q] Cotulla's stock build on HD2 PROBLEM !

Ok so I bought a phone from ebay and it had the NAND Android by Cotulla built. It came with a google account and I was trying to delete it by using this method from another forum:
"Basically this was done on a rooted phone. We used the program called Root Explorer and navigated to /system/framework. Make sure that is mounted r/w and not r/o (read write vs read only). Rename framework-res.apk > framework-res.apk.bak. You might get an error after this (force close). Just go ahead and force close it. Immediately rename it back to framework-res.apk. Reboot and you're done. Enter your new main Google account. "
I rooted this phone with z4root and it worked. And thats how i got access to the files and was able to rename the file. (the reason I rooted the phone because apperantly the catulla build doesnt require root access, so you have to do it on your own)
I got to the part were I got an error and I force closed it and it kicked me out of root explorer. And I couldnt get back in to rename it back to framework-res.apk. So I rebooted my phone and it only gets as far as were the HTC with the white screen is loading but never loads the Android OS.
When I start my phone I hold down the power but and the down volume and takes me to the boot menu, it looks like this:
aMAGLDR V1.11
Build: Dec 31 2010 05:30:51
by Cotulla 2010
------------------------------
boot menu:
1. Boot AD SD
2. Boot AD NAND
3.USB MassStg
4. USB Flasher
5. USB TTY
6. AD Hardreset
7. Tetris
8. Services
9. Reset
10. PowerDown
So Im guessing I still have hope and it is not a brick (i dont know what exactly it means but it doesnt sound good.)
Like we say in the Marines, Im a boot to this. I serious am new to the flashing roms to the phone and messing with the framework or anything.
What do I need to do to get my phone working on NAND Android? Do I need any software installed on my computer? I hope someone can explain it to me barny style so I can fix my phone. Thanks !!
I saw on another thread on this site that the catulla built is not the most popular. So is there a way to go from where im at (point stuck in my phone to flashing thru MGLDR/CWM or CLK/CWM ?) which I have no idea how to do that either.... and what do I need to do?
Thanks to anyone that wants to spent the time to help me.
-Josue
That was the first NAND rom released when cotulla released magldr.(the black screen with menu, , you get there by holding power down when you start the phone)
Thing is, it hasnt been updated or anything, it was just a proof release, and teh method it is flashed doesnt create the racovery partition needed by the CWM(clockworkmod, clockwork recovery, clockwork) method that most current roms use.
So, firstly, go get the NAND tootlkit , phone into bootloader, connect usb, (the word serial on phone screen changes to USB) in NAND toolkit click ;install magldr, since yours is out of date,, (wont need to do this again)
Then, pick a rom you want to flash, (many roms have two versions, magldr and cLK, get the magldr version for now, you can change if you like once you know what you're doing), somewhere in the first few posts of that roms thread will be instructions as to what system partition size you need.
When you know, put the phone into magldr menu, choose USB flashing, and then in the NAND tool click the size you want in the left, then click 'repartition'.
When its done, start the phone and hold power as the screen goes black, till you get the magldr menu, choose 8.AD recovery, this will start CWM which you can then use to 'install zip from sd card - choose zip' to flash the rom. (Assuming your rom was already on your sd card)
SD cards - most roms extend the internal storage memory by using an EXT partition on the sd card, so its worth setting one up before you start. In CWM - advanced - repartition you can have it create an ext partition for you. This WILL format the whole card, so back up first. (Choose 0 for swap, you can always change it later)
Read everything HERE and HERE and take your time.
Ok I had Dowloaded the NAND toolkit like 2 hrs ago but I kinda have the idea how to use it b/c I had read the entire write up. I think for some reason my computer is not picking up my phone, even though it was befor I messed it up. So I cannot get pass the first step of insatlling the updated magldr. I do the step you told me to but nothing happenes to the phone. I dont see were the word serial on phone screen changes to USB....?
OK so I have my phone in the Bootmenu (Im guessing thats what everyone calls the bootloader?). I plug it in, and open the toolkit. I click install MAGLDR, I go all the way to the step were it says verifying the information on you PDA phone...please wait...
-ERROR[260]: CONNNECTION
And it tells me make sure your phone is connected to computer. And it is. I have used 3 different cables to connect the phone to the computer. Do I have to select something from the bootmenu, or something Im missing?
One of the step is to "hold volum down buttom and power button till you see screen with three colors." But I never get to the point, im just at the boot menu.
I know my phone is connecting because it does the buzzing noice like when you plug/unplug any usb. And in the bootmenu I choose USB Mass Storage mode and it brings up my sd card on my computer. Where can the connection problem be?
Thanks for helping me with my problem.
jzboyz said:
OK so I have my phone in the Bootmenu
Click to expand...
Click to collapse
no, bootmenu is the black screen, magldr, , you want the phones actual bootloader, , , power off, press, hold, and keep holding voldown, tap and release power, keep holding voldown till coloured screen appears. thats bootloader.
amazingly I got to that part (bootlaoder). Little by little...
Next problem: Im at the bootlaoder and have "SERIAL" but it never changes to USB even though the computer is pick up the connection. And I get the same error message. Is there a reason why "Serial" dont change to "USB" eventhough it is pluged in correctly to the computer and it sounds like the computer picks it up?
Thanks for being patient with me and walking mw through the steps..
Update: I restarted my computer and it changed from "Serial" to "USB" Which is great BUT I do the steps and cant get pass the first one (STILL). The program is not picking up the phone for some reason...
Are you sure your USB cable is a power/data and not just a power cable? Not all USB cables do both.
also if u have active sync or the vista/win7 version turn off USB connections in that.
try a different USB port preferably on the back of the PC.
I have 3 usb cable, one of those is the one for my external hard drive. So I know that one should because data passes through it. I know its not the cable, and its not like I can go out and buy another one because Im in Afghanistan.
I dont not have Active Sync on my computer. I have windows 7 on my computer but I have no ports because it a laptop. I just took out another laptop out of the box, hoping I was just my computer. When I tried it and installed HD2 toolkit it also didnt work. The only way I can get the theword Serial to change is when Im in bootloader and nothing happend, I leave it pluged in, then I restart the computer. As soon as the computer start to reboot, the word changes to USB. So I figured it was going to work. So I go back to tool kit and it says the same problem: ERROR[260]: CONNECTION.
Both laptops are windows 7 running on 64bit. I dont know if it would make a difference running on a 32bit. In the bootloader this is what comes up:
PB81120 HX-B3
SPL-2.08.HSPL G8 XE
0x05
CotullaHSPL 0x50
When I did plug it inthe first time to the new laptop, something popped up, saying something about not being able to install driver, driver not installed.
jzboyz said:
I have 3 usb cable, one of those is the one for my external hard drive. So I know that one should because data passes through it. I know its not the cable, and its not like I can go out and buy another one because Im in Afghanistan.
I dont not have Active Sync on my computer. I have windows 7 on my computer but I have no ports because it a laptop. I just took out another laptop out of the box, hoping I was just my computer. When I tried it and installed HD2 toolkit it also didnt work. The only way I can get the theword Serial to change is when Im in bootloader and nothing happend, I leave it pluged in, then I restart the computer. As soon as the computer start to reboot, the word changes to USB. So I figured it was going to work. So I go back to tool kit and it says the same problem: ERROR[260]: CONNECTION.
Both laptops are windows 7 running on 64bit. I dont know if it would make a difference running on a 32bit. In the bootloader this is what comes up:
PB81120 HX-B3
SPL-2.08.HSPL G8 XE
0x05
CotullaHSPL 0x50
When I did plug it inthe first time to the new laptop, something popped up, saying something about not being able to install driver, driver not installed.
Click to expand...
Click to collapse
Hi,
If you are running Windows 7, you need to have WMDC (Google it) for the computer to recognise the phone.It contains the drivers required.
Then you should be able to install everything.
WOW that worked. Thats exactly what I needed (WMDC). Thanks alot. I was able to go from MAGLDR V1.11 to V1.3, using the HD2 Toolkit and installed 150mb b/c I plan to flash the Pongster's CM7 rom. Someone is helping in PM. I still have no idea how to flash that rom. But could not have gotten this far with out yalls help. Thanks, yall are some really smart people. Im still learning how to do this flashing and stuff.
UPDATE: I just installed Pongster's CM7 rom. It seems amazing!! Thanks for everyone help.
Question: My phone was unlocked prior to this happening. But no i inserted my sim card and it has no signal. Does the phone lock up again after doing this process? I would much of a problem if I was state side b/c I use T-Mobile but Im in Afghanistan and use a local sim and can make calls. Is there a way to unlock it, I paid someone last time to unlock my last HD2 but I dont want to do it again.
Thanks
-Josue
no, once unlocked they stay unlocked, so must be a different issue.
I feel stupid but ill just say it. I put in the similar card in wrong that's why it wasn't. Reading it. I have signal now. Everything seems to work now. But I'm going to update the radio. But I have no idea what's radio is or what its used for...can anyone answer the question for me?
jzboyz said:
I feel stupid but ill just say it. I put in the similar card in wrong that's why it wasn't. Reading it. I have signal now. Everything seems to work now. But I'm going to update the radio. But I have no idea what's radio is or what its used for...can anyone answer the question for me?
Click to expand...
Click to collapse
Hi,
Generally the best radio for Android is:
Radio Leo 2.15.50.14.
HERE
You can check which radio version you have in:
Settings>About Phone>Software Information>Baseband Version.
jzboyz said:
I feel stupid but ill just say it. I put in the similar card in wrong that's why it wasn't. Reading it. I have signal now. Everything seems to work now. But I'm going to update the radio. But I have no idea what's radio is or what its used for...can anyone answer the question for me?
Click to expand...
Click to collapse
You really need to go read some basic guides/newbie info instead of rolling of questions. It would be of much more help to you.

Bootloader not detected at PC

Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.

Help me please to fix my phone

My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7

Categories

Resources