Database Users

Video Out through mini USB?

Has anyone looked into this? With the audio now being output there, is there another pin carrying video that's yet undiscovered? Thanks.

nope no video out from what ive researched. even if there were, its qvga resolution so you are fairly limited.
you could your soti pocket controller to control your pda from your PC, you get a real time feed of you ppc on your pc.
hope this helps.
adios...

It is definitely possible to do it (even that I have no idea how).
Ateksoft has a program called WebCamera Plus which let you use your PDA as real-time webcam.
http://www.ateksoft.com/webcamplus.html
I'm using it on my TyTN and it works great.

using a pda or symbian smart phone as a webcam is possible as the software captures the straming video and transmits its as data packetrs via usb or BT to a PC, in which it is then decoded on the PC and the image/video stream from the camera is formed.
Actual video out (such as that accomplished with notebooks) via usb on the TYTN is another thing - from what I have read it might not be possible.

Anyone seen or tried the MicroSD version of this http://www.spectec.com.tw/sdv.htm ?

its really funny u askd this cus just last night b4 I went to bed, I wondered the same thing
I googled video out via usb and found a 60 dollar cable that converted from standard usb to s-video and audio and I'm sure theres mini-usb to usb converter
=) so hope that helps. I'd look it up but I have no 3g here at my parents lake house =/ I'm connectd over gsm, just got here. I get no umts at all and barely any gsm signal. this craps slow

I looked on the net for the Spectec Video-To-Go microSD Card and found it here
http://www.mobileplanet.com/p.aspx?i=139433&partner=froogle
It's $171.95. this would be great if I was still doing customer presentations.

Please note: This product does not convert the screen’s image into a VGA video signal. ... then what exactly does this do .. has me confused since some time ...
Also, these things require SDIO support .. not sure if TyTN got one ..

It'd be easy enough to emulate VGA on your device and use that for presentations, but your limitation is lack of an I/O to the graphic chip. As such, you're stuck with streaming the display data, which will be slow (for games), but perhaps perfectly fine for a slideshow.
Next prob though is the hardware - you can stream from device to device, but not stream from device to a (mini-usb) wire to a projector etc - at least the hardware issues are well beyond my experience.
A streaming projector might be a good solution. But all in, I think you're generally stuck for a cheap solution to outputing video over USB without a surrogate device in the middle. And if you're gonna have a surrogate, you might as well use that as the display device.
Check out nyditot for a VGA emulator.
V

May I suggest a better way? Simply install PC-based Powerpoint viewer on storage card. That way you merely need to drop your card into an USB SD reader, connect the reader to any host PC, and run your presentation. I do this often and avoid traveling with my laptop.
-Jeff

One reason I've always disliked the Ateksoft solution is that it requires installation of Ateksoft magicry on the PC. A true webcam solution should simply make the PPC act like a dumb webcam, piping the audio and video to the USB. We've all experienced those cheap webcams which you just plug in to your USB port, and MSN or Yahoo or whatever can pick up the device as an audio/video webcam, no installation of drivers required.
Software which does for webcam what Softick does for USB mass storage is what I'm after...

You didn't say what you wanted by 'video out'.. but I can tell you there aren't any 'unused' pins in the USB pinout. They're all audio or usb data. If the TYTN supported usb on the go (which it doesn't seem to) then you might see it turn into a mass storage device or webcam easily..
But for the moment, no, theres no pins to tap a composite or vga signal off of. I highly doubt the device has such a chip on board.

eh, I wanted to output video to my car A/V system. since I can sync the video on my device to my media center, that would be the easiest way to take shows to my car. so the streaming or flash solutions really don't address the problem for me...thanks for all of the thinking on it, though

ditto here
JEM said:
eh, I wanted to output video to my car A/V system. since I can sync the video on my device to my media center, that would be the easiest way to take shows to my car. so the streaming or flash solutions really don't address the problem for me...thanks for all of the thinking on it, though
Click to expand...
Click to collapse
That's the kinda stuff i've always wanted e.i. connecting my PDA to the SVideo Input of my car screen.
Seems "easy" to do with activesync, but seems to cause trouble because of the lack of video stream on usb pinout.
I'm just letting out an idea : Might be possible to emulate an activesync connection and capture the sreeen of the PDA and broadcast it out on svideo.
(don't ask, I don't even have a clue of how to do that)
SOTI Pocket controler and My Mobiler can do that, any chance someone find out a way ?
TY Guys, have fun

[Q] DVB-T on Iconia A500 ?

Hi,
I have an usb dvb-t stick (of the family A867 of avermedia, the nano 3d), can you tell me where the drivers are installed in the honeycomb for the iconia a500?
When I it connect to the iconia, from the terminal typing the command smesg, I can see that it recognizes the device but does not have the drivers

What makes you think drivers exist? If there are Linux drivers available, you might be able to port them, but then what? You'll also need an app capable of decoding the data from the device, and tuning in to the needed frequencies. Such a thing doesn't exist on Android at the moment.

ok, thanks for reply

db-t
FloatingFatMan said:
What makes you think drivers exist? If there are Linux drivers available, you might be able to port them, but then what? You'll also need an app capable of decoding the data from the device, and tuning in to the needed frequencies. Such a thing doesn't exist on Android at the moment.
Click to expand...
Click to collapse
Drivers exist ! DVB-T is functioning on Archos 101 (Froyo). They have an app that scans (livetv.apk as i remember well) the dongle. Look for internetadresses at the thread i opened a week ago. Unfortunately í'm not able to adapt the existent drivers for our tablet. The last driver i wrote was to connect a Teletype to a Z80 processor so now you now i'm a digital dinosaurus.

My "Cinery T USB XE" works on my Acer Iconia A210.
I have done a channel scan with droidTV.apk. Found channels, but have a very high error rate, so it*s don't see anything.
Is any one working on an app for DVB ? Maybe someone can tell how to crosscompile an binary? Or maybe can tell me how to configure toolchain paths for compiling successfull????

Nexus 10 usable as screen?

Hi xda users,
since the display of the Nexus 10 will be awesome I'm contemplating getting it because I'd really like to use it as a (second) screen for my computer. Does anyone know if this will be possible? Probably not without, but maybe *with* a mod? Can we use this Miracast Screen Share the other way round possibly?
It'd be really cool to play games on it as well, with the power of my desktop. I wouldn't be able to tell the pixels apart/ wouldn't see any pixelisation. Also this will get rid of the need for antialiasing which will boost performance
Woohoooo

There's an app for that
iDisplay or Splashtop 2
I personally haven't tried them out but they might be what your looking for.

Thanks! Well Splashtop2 is only over Wireless, so it's probably going to be to slow at least for gaming. iDevices with USB support looks better. Does anyone know how bad the latency is (with both)?

Anyway to make the tablet as a video monitor? i/e hdmi IN?

Splashtop2 is pretty good and there is hardly any delay so depending on what you are using it for it might be okay, but it doesn't give you an extra screen just mirrors an existing one. If you want an additional screen you could try airdisplay, haven't tried it for gaming but it might be okay.
Also I have played D3 using Splashtop and besides not being a very good game it worked fine.

OMG that's awesome sauce
OMG that's an awesome idea, the Nexus 10 has resolution comparable to my 30 inch monitor... crazy.
please post to tell us if it worked.

Yeah I'm very interested in this. I tried out Air Display and it worked well, but it had low framerates and some lag.

How can I use the Nexus 10 to replace the cracked screen on my Lenovo E420 laptop?
I will not always have access to a wireless network, so I need to find a solution that is either wired or bluetooth.
I assume a wired connection would be best, followed by bluetooth.
Thanks.

tt c6 said:
How can I use the Nexus 10 to replace the cracked screen on my Lenovo E420 laptop?
I will not always have access to a wireless network, so I need to find a solution that is either wired or bluetooth.
I assume a wired connection would be best, followed by bluetooth.
Thanks.
Click to expand...
Click to collapse
I don't think it's possible to do it wired, because the Nexus 10 has no input port for its display.
Bluetooth as far as I know does not have a protocoll for video transfer, so that's not possible either afaik.
However you might be able to connect them per WiFi Direct oder WiFi Ad-Hoc, meaning you don't need WiFi network on it's own because they connect directly or the Nexus 10 to the Ad-Hoc network, respectively. If your laptop supports WiFi Direct (you can look it up on the WiFi Alliance Website, every product is listed there) you might be able to use Miracast. But you need software for it on your laptop for windows or whatever you use. If you got Android 4.2 on it, then you don't need new software ;P (that's probably not easily achieved, but may be soon when there's an official x86 AndroidOSP Version).
If not, try DLNA. I don't know if Windows or Linux supports it, but I think support is achievable through software.
Good luck and report back if it works!

[Q] Nexus 7 as display for TV dongle possible?

Hello everyone,
I am attempting to set up a Tronsmart MK908II TV dongle as a portable sandbox and web development environment. For my first attempt I'm using the stock ROM and apps from the app store such as Bit Web Server and Terminal IDE. I've had a fair amount of success, though very tempted to install Pi****u (Ubuntu) for a more powerful environment.
One of my main objectives have a miniature HD monitor so I can have direct access to the device if necessary even when I'm on the go. Before I go out and buy a suitable device for this, I'm trying to get my Nexus 7 to act as the display, since I will always have it with me and it's the perfect size. I believe I may have all the necessary cables and converters to make something like this possible... I'm just a bit stuck at the moment on getting it all to work as I want and I suspect its a software/config/capabilities limitation more than a physical one. I have already attempted this a couple of different ways, including using a USB cable from the dongle and an OTG converter for my Nexus 7, but could not get the Android USB Serial Monitor Lite app to recognize input from the dongle.
Does anyone know of any tools or knowledge that might help me achieve this? I can probably find an app that will allow me to remote control my dongle from my Nexus, which is plan B, but it's far less desirable since there are some circumstances that a purely software solution might not work from the dongle end.
Thank you for your time!
Tennyson Hull

DVB-T

Any chance to use an USB DVB-T DONGLE with NEXUS PLAYER?

Maybe. You want "TV" on your Set top box ?
Software is the tricky part. Does this work ? : http://www.geniatech.com/pa/pt115m.asp
I recall a decent thread here on XDA somewhere but can't find it right now and seem to recall the app wasn't going anywhere too fast.
And there's at least one 3 star app on Play, but doesn't work for many people.
I'll be happy just to get FM radio, with SDR Touch or whatever...

thanks, can be a thing like that but I want to use any usb dongle that I want and not a single choose like that.
For example I'v build for my daily use, a mini barebone with a small debian distro with VDR, in this way I can play divx and dvb-t as I want but, if my dongle usb dvb-t for any reason broke........I can buy the first dongle usb that I found on any market online, compile kernel module for that dongle and put in usb port it, it's so simple.......
I love nexus player, 99$ about, remote control, android marke, playing game, youtube, and more infinite possibility, but at TV DVB side I want be free to use any usb dongle DVB for desktop pc as I made today
There's any chance to get, nexus player kernel, enable DVB module for dongle, put inside usb port of nexus player, and watch tv?
At software side, is need an app or Android TV S.O. is capable to manage DVB correctly?
Thanks in advance!

Do you have any other Android devices? If you're already comfortable recompiling a kernel to support your hardware, I'd suggest trying that on a different Android device first. Then you would know if the Android framework could handle such a device.
EDIT: Here's a link to the Android TV developer site about supporting live TV in Android TV. It appears it's designed around that being possible, so if you can add your tuner hardware support to the kernel I don't see why it wouldn't be possible to make it work within Android.

ok tnx