Database Users

[Q] SD Card Help!

Hey guys. I'm currently running this ROM, I've been using it for a few days and have had no problems but today, when I turned the phone off and turned it back on, it took ages to turn back on. Then when it did it all looked them same but was kept freezing etc., then up in the notification bar it said "SD Card Removed Unexpectedly" then my phone went crazy with FC's.
So I took out the battery and restarted the phone. Then, it would turn on and go to the lock screen but then it would reboot and be at a continuius* boot loop of the HTC 'Quietly Brilliant' screen.
So then I took out the battery again, this time I took out the SD card too and booted up and my phone was normal again. Obviously with no phone storage though as there was SD card in. Then after I just skipped the setup I put my SD card back in to my phone and went to the music player and all my saved songs on my SD card played. But no internal storage (I have the SD card partitioned with a 1GB Ext3 partition). Then with the SD card in knowing it still works I rebooted again, only to come back to the HTC screen again.
So basically, how can I fix this?
If I'm going to need to format my SD card is there a way I can backup what's in the Ext3 partition?
Thanks,
L.

Bump. Need to be able to use my phone properly again urgently. Thanks.

Skellyyy said:
Bump. Need to be able to use my phone properly again urgently. Thanks.
Click to expand...
Click to collapse
It sounds like something is really funky (faulty hardware?) with either your SD card or your phone. You could try reformatting it with that Panasonic tool...
You can backup your SD-EXT partition with CWM/CWR. You can boot CWM from MAGLDR without flashing anything. Just put zImage and initrd.gz from the CWM download on the root of your SD card and boot "AD SD" from MAGLDR.

Digital Outcast said:
It sounds like something is really funky (faulty hardware?) with either your SD card or your phone. You could try reformatting it with that Panasonic tool...
You can backup your SD-EXT partition with CWM/CWR. You can boot CWM from MAGLDR without flashing anything. Just put zImage and initrd.gz from the CWM download on the root of your SD card and boot "AD SD" from MAGLDR.
Click to expand...
Click to collapse
Thanks for the reply. It's not the phone as I have a 2GB SD card in it right now but that's not big enough.
Yeah I have a problem with CWM, when I click AD SD it says some Kernel error thing.
Is there any other way to find the files in my Ext partition using my computer?

Skellyyy said:
Thanks for the reply. It's not the phone as I have a 2GB SD card in it right now but that's not big enough.
Yeah I have a problem with CWM, when I click AD SD it says some Kernel error thing.
Is there any other way to find the files in my Ext partition using my computer?
Click to expand...
Click to collapse
Unfortunately not that I am aware of. Where are the CWM files located on your SD card? Are they on the root or in a subfolder? Did you modify the path MAGLDR looks for the "AD SD" path? Are you using the latest CWM release?

Yep they're on the root of it. I think it's 1.12 I have ATM. How do I modify the path? :S

Nevermind. I tried re-installing and it worked on my 2GB SD. But the thing is, the files I want are on my 16GB that won't read lol. I'll try flash it on that now.

Tried to flash my 16GB. Says SD Kernel Open Failed in red letters? Works with my other SD card though? :S
Now I just tried with my 2GB and it's saying the same thing again.

[q] urgent help needed!!

Ok, I have CWM and I can access it. I cannot read from my External SD Card to install a rom. I can access my Internal SD but I do not have a rom in there.
I cannot boot into the previous ROM since I erased everything and when restarting I get boot loops. I need the tablet to get back to work tomorrow.
Any help would be greatly apreciated.
I have a ROM downloaded in my PC but when I connect the A500 to the PC (via USB) I cannot mount it to copy it there and flash.
HELP please!!!

What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.

shin lucifer said:
What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.
Click to expand...
Click to collapse
I was able to put the SD Card from my phone and flashed the new rom. The tablet is sill not recognizing the SD Card though. I put it on my PC and it wont detect it (cant format it that way). I put it on my printer and I am able to read from it but I cannot format it. It tells me that is right protected.
I need to find another way of formatting it.
Thanks for your help.

I suggest you get a new sd card. Clearly the one you're trying to use is not working.
I'm not even sure if you can "write protect" an SD. Maybe something on the micro SD adapter perhaps (switch)? Or an option in Windows Explorer (check the sd's "properties". If it says "write protected", then turn it off.

Can't format my sd card

Hey guys so I tried installing Icecream Tosti's ICS rom v0.6 but it after booting up I saw that the previous version (o.5) was still on the the phone and all my settings and stuff were still there. I had done a fresh install and was confused. So I tried again but it didn't work and when I tried formatting my sd card it wouldn't let me.
I have tried many different tools: Mini tool partition manager, easeus partition manager, hp sd card utility, panasonic sd card formatter, and windows disk management but I kept on getting the errors, can't format. I plugged in the sd card into the computer via a sd card reader and a usb sd reader and even tried different computers but the same error popped up.
Just recently I booted into the rom and plugged in the phone through the usb cable. When I formatted using some of the tools above it showed me the format process was completed, but when I unplugged the phone and rebooted the phone the sd card reverted back to its original state and the sd card was not erased.
Does anyone have any ideas how to fix it? or is my sd card completely gone. I feel like it is just locked and write protected but I don't know how to unlock it since there is no switch on the side. I will really appreciate. Thanks in advance.

Can't Mount SD Card in CWM 5.x!

So i went to flash a ROM and now it says while flashing that the flash was aborted because the system can't mount the SD card. I'm using the newest CWM and have flashed stuff before. Not sure what to do, it wont let me make backups, restore, or flash anything.
I find it kinda strange, because once I reboot my tablet, everything's working fine, but it's not letting me install a custom rom
And yes, I have...
1. Unlocked by booloader.
2. Rooted my phone along with installing superuser.
3. Installed CWM recovery through fastboot (or whatever it's called, lol)
Has anyone gone through the same thing?

Bump....
Cm on guys I really need to get this rolling ...

What class SD Card are you using? I have issues with CWM on this Tablet reading anything above a class 6. I have a Class 10 SD Card that I have to swap Out and put in a different slower class card to flash roms and what not so I personally have had to deal with this because of the speed. Anyway hope that helps you out.

I'll try another sd card and see if it work out. Thanks for the advice!!

Bump. Using a different SD card didn't work, unfortunately

Silencer96 said:
Bump. Using a different SD card didn't work, unfortunately
Click to expand...
Click to collapse
Back up all ur SD card files to PC
In CWM, you will find a Advance/ partition Sd card
Use this and make a 128 mb one, Reboot to CWM and CWM will recognize your card.

demonntl said:
Back up all ur SD card files to PC
In CWM, you will find a Advance/ partition Sd card
Use this and make a 128 mb one, Reboot to CWM and CWM will recognize your card.
Click to expand...
Click to collapse
thank you very much....really helpful

Please help me i have a similar problem. I tried to partition it and it worked but it wouldnt recognize my sd card. Idk what happened maybe i formatted by mistake and now i dont have a system (or atleast it wouldnt boot up) and i have a cwm that doesnt mount recovery so i cant flash.
please someone help me! i need my phone

FIXED!
Nevermind. I did it wrong. U were supposed to partition sd card make it 128-128 and then while still in advanced setting restart launcher. Then you have to go to mount the card manually through mounts and storage.
if you just shut down the device it wouldnt work.
thank you for helping me fix this demonntl

[Q] Issues with SD Card not mounting on CM10

Hi guys, long time reader and first time poster here with a question. I apologize in advance if this has been asked and answered, but I have searched throughout the nook forums and have not found a solution yet to my problem and any help is greatly appreciated.
I have been wanting to use CM10 as my daily driver on my nook for awhile now, however everytime I flash the ROM and get things set up, I run into an issue where the ROM does not consider my SD card to be mounted. I have adjusted the settings to be set to Mass USB Storage as one person suggested in the development thread, I have formatted it numerous times to try to see if that was causing the issue, and so far nothing has worked.
I know that the SD card that is in my nook is good as it shows up in ICS without any problems. Does anyone else have any idea on what I could try to get the SD card to mount properly in CM10?
Thanks again for any help, and many apologies if this is answered in another thread.

Shinryuu said:
Hi guys, long time reader and first time poster here with a question. I apologize in advance if this has been asked and answered, but I have searched throughout the nook forums and have not found a solution yet to my problem and any help is greatly appreciated.
I have been wanting to use CM10 as my daily driver on my nook for awhile now, however everytime I flash the ROM and get things set up, I run into an issue where the ROM does not consider my SD card to be mounted. I have adjusted the settings to be set to Mass USB Storage as one person suggested in the development thread, I have formatted it numerous times to try to see if that was causing the issue, and so far nothing has worked.
I know that the SD card that is in my nook is good as it shows up in ICS without any problems. Does anyone else have any idea on what I could try to get the SD card to mount properly in CM10?
Thanks again for any help, and many apologies if this is answered in another thread.
Click to expand...
Click to collapse
When you say mounted, you mean you cannot see it under storage devices within CM10? It does not show up in your file manager? That USB mass storage setting is just for seeing on your PC when you plug the USB cable in. It has nothing to do with seeing the card in CM10. And you tried formatting several times you said. How did you format it? In the PC with windows? You need to try SDFormatter which is a free windows program on the web. Other users have said that that makes them show up on the Nook. When the nook first starts up, it tries to read the SD and scan it, if it can't, it won't mount it. There could be something very simple wrong with the card that the nook sees and your PC does not.
Sent from my Nook HD+ using Tapatalk

Leap,
I have to apologize, I used the wrong terminology in my original post. It seems that the issue I am having is with the SD card being stuck in RO mode and not being able to write to it from CM10. Anything that I have tried to download via the Play Store fails to install with an error saying that it could not install to USB Storage or SD Card. I have formatted the card via Windows, CWM, and using the SDFormatter program to no avail. I have also tried to fix permissions via CWM and Rom Manager and that has not resulted in resolving the issue that I seem to be having. I love the speed at which CM10 runs, and if I can get the SD Card to be RW it would easily replace the ICS build that I've been using forever now, I just don't know what else I can try to get the card to be RW while running CM10.

Shinryuu said:
Leap,
I have to apologize, I used the wrong terminology in my original post. It seems that the issue I am having is with the SD card being stuck in RO mode and not being able to write to it from CM10. Anything that I have tried to download via the Play Store fails to install with an error saying that it could not install to USB Storage or SD Card. I have formatted the card via Windows, CWM, and using the SDFormatter program to no avail. I have also tried to fix permissions via CWM and Rom Manager and that has not resulted in resolving the issue that I seem to be having. I love the speed at which CM10 runs, and if I can get the SD Card to be RW it would easily replace the ICS build that I've been using forever now, I just don't know what else I can try to get the card to be RW while running CM10.
Click to expand...
Click to collapse
The problem is CM10 is very finicky about the format on the card. If it does not like it, it mounts it read only. Look for SDFormatter on the web and format with that. Should fix it.
Edit, I just reread and said you tried that. That should have fixed it. Do it again but turn off quick format.
Sent from my Nook HD+ using Tapatalk

Leap,
Thank you for all the help you've provided, however it doesn't seem that doing a long format with overwrite in SD Formatter got it to work. I'm going to retreat back to ICS for now.

Shinryuu said:
Leap,
Thank you for all the help you've provided, however it doesn't seem that doing a long format with overwrite in SD Formatter got it to work. I'm going to retreat back to ICS for now.
Click to expand...
Click to collapse
Just a question, after you format the card, do you move any files in it? I had the same exact problem and it must have been a defective file in my titanium backup folder because I had no problem using the same sd when I synch'd titanium via dropbox.
I installed the 19/11 nightly and it is better than anything I ever run on nook. even CM7

Tschumi,
After I finish formatting it via SD Formatter, I place it back into the nook completely blank and reboot the nook. After that, I try to download anything from the play store that requires SD install and it fails to install.

Shinryuu said:
Tschumi,
After I finish formatting it via SD Formatter, I place it back into the nook completely blank and reboot the nook. After that, I try to download anything from the play store that requires SD install and it fails to install.
Click to expand...
Click to collapse
Use ROM Manager and select "Format SD card" which will allow apps to install. Nook will reboot into CWM and begin formatting SD card. Be FOREWARNED! You will lose anything you have stored on the SD card so make a backup and trasnsfer to your PC or somewhere you can later retrieve.

Ok so here's an update on this issue for me. It appears that no matter how many times I used SD Formatter to format my 16Gb micro sd card, it would not be recognized by CM10. I grabbed an old 8Gb micro SD card and threw it in my nook and it worked perfectly, so it appears that there's an underlying issue with the card itself that was causing the problems. Thanks to everyone for the tips and advice on how to fix this issue for me. I appreciate it.

Same issue here
Shinryuu said:
Ok so here's an update on this issue for me. It appears that no matter how many times I used SD Formatter to format my 16Gb micro sd card, it would not be recognized by CM10. I grabbed an old 8Gb micro SD card and threw it in my nook and it worked perfectly, so it appears that there's an underlying issue with the card itself that was causing the problems. Thanks to everyone for the tips and advice on how to fix this issue for me. I appreciate it.
Click to expand...
Click to collapse
I am having the same issue with my 16GB Patriot microSD card. The card is recognized, but always displays as full (26GB used) in the settings menu. I have reformatted numerous times to no avail. I have an old 4GB card in there now with no issues.

danman6126 said:
I am having the same issue with my 16GB Patriot microSD card. The card is recognized, but always displays as full (26GB used) in the settings menu. I have reformatted numerous times to no avail. I have an old 4GB card in there now with no issues.
Click to expand...
Click to collapse
It is that Patriot brand and CM10. CM10 is very finicky about sdcards. If it does not like how one performs, it changes it to read only. You can try formatting the card with SDFormatter, which you can get free on the web. That may help, but it may not.
Sent from my Nook HD+ running CM10.1 on Hybrid SD