Please i hope somebody will be able to help me !:!!
I flash my LG Optimus 7 with the tuto on this forum, and it went well until the reset when it said : " ErrNum502 Emergency Model Fail ".
I can still access the emergency mode but after several flash tries, the phone stays on LG first screen : what can i do ?
No help??
HEu no help here ? i should get it to SAV so
@ohlafilleuh
Hope you have solved your problem...
I also had the same problem with my E900
While flasing in LGDP2 when the Software comes to RESET ...and the set will be Reboot to LG Logo press STOP button and remove the usb cable .
SWITCH OFF the mobile ,remove battery, refix battery and Switch on ,wait till it reboots one or two times.
Finally if will come to the Windows screen
kayanvv said:
@ohlafilleuh
Hope you have solved your problem...
I also had the same problem with my E900
While flasing in LGDP2 when the Software comes to RESET ...and the set will be Reboot to LG Logo press STOP button and remove the usb cable .
SWITCH OFF the mobile ,remove battery, refix battery and Switch on ,wait till it reboots one or two times.
Finally if will come to the Windows screen
Click to expand...
Click to collapse
y have same problem but the program says me errnum6 open port, and my lg e900h only boot on lg logo and again and again until battery drain
Related
Hi Guys,
I was in the middle of flashing my OMNIA 7 then suddenly my computer shutdown due to a blackout at our home. Now my phone is stuck on the OMNIA 7 logo during boot and keep going that way.
I could still manage to go to download mode and reflash but when I try to flash it there is an error that would indicate "WRITE MIBIB FAILED!"
Is my phone bricked? I need your help.
By the way, if I get still manage to go to the DOWNLOAD MODE would that mean that my phone is not bricked?
Thanks!
Have you tryed formating before you try? Just use the other volym button.
Tryed yet?
Yeah I tried it, but still not working. . I still manage to get to "download mode" though.
As I have read through the different posts in the forum I see people experiencing the same problem such as the phone which keep on restarting and stuck on the "OMNIA 7" startup logo. . I tried the fixes that other's recommended but still doesn't work.
I tried taking the battery out for a day then putting it back in, the phone managed to boot up and I was actually able to use it but if I try to restart it again or sync it to the computer, It suddenly resets then goes on the boot loop once again. .
Well then I guess there is only one way. Return it to the store. :'(
to flash, ALWAYS restart your computer before and use a laptop with charged battery to avoid this problem.
For your problem you can tried to flash only bootloader part, radio part, or only PDA part for testing.
hay man
I had the same problem and here is the solution
follow the this link http://support.microsoft.com/kb/2530409/en-us
it works 100%
I hope it works with you as well
Nice one Abd654. Hope that helps you bor. GL
I have a problem getting in to "Connect to PC" I followed the instructions on holding the power and camera buttons, etc. but it won't go to "connect to pc" screen. . it's just keeps on flashing the "Samsung Omnia 7 logo" on the screen everytime I turn it on.
I tried doing hard reset but I cant because once the hard reset screen shows up, the phone just restarts again then the start up loop happens again. .
try this one this is from microsoft answer
http://support.microsoft.com/kb/2547687/en-us
Hello guys.. I try to update something (I really don't know what), after updating phone was stuck in recovery mode.. When I turn on phone shows LG logo, then yellow backgroud "EMERGENCY MODE".. I try to repair with LG Support Mobile Tool but program can't recognize phone, when using Volume + and power program recognize phone, but after 3-5 sec stop.. I try reinstall lg drivers but nothing.. How to fix this does someone know ? Sorry for my bad english
Thanks
Hello guys! I hope that you can help me
A friend of mine has this lg that doesn't work anymore. It charges without any problem( red led and battery icon that it's charging) but, if I try to turn it on, it simply vibrates or lg logo appears with four led colors. I've tried hard reset,soft reset, plugging on pc but nothing. The only thing I can do is download mode (volume+ / volume - and power button). I've tried using KDZ FW UPD EN but, after some minutes, it says that phone was not found. I've installed lg drivers, disabled modem driver but nothing. I'm doing this on windows xp. Any advices? Or the phone is gone? Thank you so much and sorry for my english
Phone Model: AT&T LG G2 (D800)
Recovery: Custom TWRP Recovery
ROM: CM12 Official ROM
My phone was working fine from last 3-4 months, until today it restarted and got stuck on 'LG' logo, I left it for some time and it shows the demigod green screen of death with option to access download mode and restart.
What I already did!
1) Full hard reset, I can access the TWRP.
2) Flashed the ROM again.
Current Situation!
Stuck on LG logo from last 10mins.
Thanks in advance.
Edit #1: Reflashed the same ROM (CM12) and it booted into the language selection page, freezes and restarted. Stuck on black screen, I turned it off by pressing the power button for 10-15 secs. I kept it in a freezer for 10-15secs and turned it on, same happened.
Edit #2 I flashed a stock based ROM through TWRP, it was going fine but it froze in between, I waited for some time and it went black. I waited for 1 hr and it was still black so I hold the power button and restarted the phone.
Now its showing "Secure Boot Error" which remains for some secs and a black screen comes, I can't open TWRP, Download mode is accessible but after 2 secs into download mode, secure boot error comes. Whenever I try to connect it to Windows PC(I installed all the required drivers and all) it starting popping up drives(with option to format) which never stops until I remove the USB cable.
Hi!
In this thread someone posted a solution.
jazibzps said:
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode
I performed all this on lg g2 d801 but i hope u can try it on other varients as well. As i was scared of short circut method and srk tool didn't help..
Click to expand...
Click to collapse
For informations about LGs flashtool etc. please check out the G2-Index-Thread.
Jan Philipp said:
Hi!
In this thread someone posted a solution.
For informations about LGs flashtool etc. please check out the G2-Index-Thread.
Click to expand...
Click to collapse
Thanks for replying.
My case is a bit different now, I reflashed the same ROM(CM12) and it successfully booted, worked for 10 secs and it was frozen, restarted automatically, stuck on LG Logo.
I notice that there's some heat issue, I kept it in freezer for 10 secs, rebooted it, it booted till language selection page and freeze after 10-15secs.
Also the link is for DemiGod Critical Crash, mine is DemiGod Kernel Crash.
Updated!!
First post updated, please check the current situation before posting anything.
I don't have a computer or laptop to connect it to so how can I fix it?
Hi Guys,
I got my G2 back from my brother who have not using it for a while.
1st day it was working. I plan to install Lineage or custom ROM today...thats when the issue start:
1: it wont go to recovery mode. Even thou I have rooted and install latest TWRP it will only boot to Hardware control key screen, only this screen and wont boot to the OS it will be stuck on LG logo forever....
2: tried to go to Download mode....the same It will go to the same hardware control key only....
3: when I plug in to my PC it wont turn off, keep on restarting after I press the power button for a while.... only if no cable connected I can totally turn it off...
For a noob like me....looks like my G2 D802 is brick :crying: ...any suggestion?
PS: windows detect it( As below picture ), off at all when I plug in AC.....It Will just show the LG logo and the LED just flashing non stop until I pull out the cable and turn it off...
This is what shown on the laptop No Disk1/2/3/4/5 of sort showing on the Device Manager and on the phone each time I try to go recovery or download mode belowh happen:
https://flic.kr/p/QH2HzE
https://flic.kr/p/2bs67ne
Update 1: I found out why the phone was brick. Seems like my Brother ask his friend to install Lineage 15.1 on the it. After everything is verified ok. He wipe and try to flash the rom in TWRP but.....it failed and suddenly just freeze and turn off the screen. Maybe bad ROM download or some step miss....so now the Phone has NO OS and would not boot to anything only the Hardware Key Management....that's all....help? Need the phone as 2nd phone for company lines....dont wanna take the iPhone 6 from my boss....
help?