Database Users

[Q] I cracked my digitizer....hard to replace?

So I was pretty careless and dropped my N1 in work, landing perfectly on it's screen It still functions perfectly and the AMOLED screen hasn't been damaged, simply the digitizer. I've already ordered a new one with all the tools necessary to replace it, but I'm yet to find any definitive guide on replacing the N1 digitizer.
I came across thread #751923 (Can't post links as I'm new) which seems really helpful but a guide with pictures/video would be awesome. There's a 45 step youtube vid on how to replace it as well but the quality/clarity isn't great. I'm sure I can use both of these to replace it just fine, It just seems a little daunting.
Basically I'm looking for consolation along the lines of 'It's damn easy to fix' Any love for a fellow N1-er?

It is easy to fix. Two tips: don't use metal spatulas to pry the plastic under the battery off and gently wiggle and push the motherboard out only after disconnecting all the little connectors on it.

Im also waiting on my digitizer. I'm going to folllow these 2 guides.
http://www.ifixit.com/Teardown/Nexus-One-Teardown/1654/1
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html

Have done it and you actually found better tear-downs and tutorials. Use youtube as well. The videos help because they show the techniques as well. Hardest part i would have to say is sliding the motherboard out the bottom under the metal separator. I think it was great and taught me a lot about my phone. The thing you have to watch out for is dust and fingerprints under the screen. Once it's on...it's on, anything underneath is stuck lol. make sure it's all clean and you won't have any annoyances like dust particles like i have.

I did it, mostly successful. I damaged the cable to the trackball, so be careful at that step, otherwise nothing difficult, just takes an hour or so.

Cheers for the info and advice guys, should hopefully get my replacement digitizer tomorrow so I'll keep this thread updated with the outcome

I have replaced my digitizer. It cost me $45.00. It was challenging but not impossible. The hardest thing is not tearing any of the ribbons when dissasembling. It was a successful replacement. The only gripe I had was the digitizer I bought did not come with the adhesive to glue the digitizer to the frame. Make sure you have a way to attach the screen to the frame before you begin the process. Other than that it should be easy as long as you take your time.
Sent from my Nexus One using XDA App

I replaced mine.. it took a solid hour or so, just be very careful not to tear any of the ribbon cables.. everything is super small and delicate.
I now get lots of dust in the corners of my screen because i didn't seal the new digitizer properly, but its not a huge deal to me.

replacing the digitizer is easy... its taking apart, and putting the rest back together that sucks. just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.

nexusonemeover said:
just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.
Click to expand...
Click to collapse
haha reminds me of when I took my laptop apart to re apply thermalpaste. I ended up with 7 extra screws >.< But the thing was together and has been running fine for the last 6 months so O.O

I did it, not too bad if you go slow and deliberately. I also have dust under my screen now. I sort of wish I would have just sent it to HTC but the money saved is worth a little dust.

A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .

rob61280 said:
A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .
Click to expand...
Click to collapse
That's a great idea, rob. I always think whenever I take apart a phone that I should have a video camera handy to record what I'm doing so I can play it in reverse when I'm putting it back together

For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.

Well I eventually got my digitizer this morning. It took until I had everything taken apart to realise they had sent me a compatible but ill fitting digitizer. It doesn't even have the appropriate buttons (it did in the selling image) at the bottom. At this point everything works fine but it doesn't look perfect. I guess it'll have to do, thanks for the advice guys

omgdwong said:
For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.
Click to expand...
Click to collapse
Wow thats cheap, I just got quoted for around $300US to fix my phones screen.. not including labor.. argh
Does anyone know if HTC in america repair phones from the other side of the world even though they were purchased from google's store?

I just sent my phone into HTC to be repaired for a cracked screen expecting it to be $115 and was pleasantly surprised to find that it would only be $55 including shipping! HTC was also extremely quick to get back with me for the quote. I sent the phone out Tuesday at 4pm and they have looked at it and quoted me the repair cost by Wednesday at 2 pm.

I recently cracked my digitalizer as well.
I called HTC 2 times without giving any information about myself before calling a 3rd time to do the actual swap.
I was quoted at $115 for me to send in my N1, wait a week without a phone, and have them replace the digitalizer, before shipping it back.
I then further inquired and found out they have a Swap program where they mail you a new(refurbished, but perfect) phone, and a FedEx label, which they still quoted me $115 to fix the screen, and a possible $275 if they needed to replace the logicboard, but they would get a quote back to me with all the things they would need to replace. It would require a $529 charge to my card, incase i didnt send the phone back at all.
I mentioned that my camera was broken, as well as my trackball was loose, and he said the quote would include this as well.
I called back a 3rd time, requested a swap phone, and had one 2 days later.
i mailed my phone into HTC, and two days later i had my quote.
I paid $55 after it was said and done, and have a new (refurbished) phone
I was rooted,unlocked, and running Kang-O-Rama 1.0 when i shipped the phone in. I didnt bother to fix that.

[Q] Display repair: What should I do?

Hi
Ok,my HD2 is broken since October and I'm a student and i just couldn't afford the repairs. All I know is that - it seems like this - the connector to the display is not working anymore (common problem I heard).
But honestly I have no idea what to do:
Money is still a bit tight so I can't really buy a new phone.
On the other I couldn't even figure out what to repair. I know the display is a whole unit (LCD and touchscreen glued together) and somewhere in between is the connector,which lost his contact to the mainplatine.
But all I find are the plastic frames with a connector ( http://www.algogo.com/store/product...er-HTC-HD2-II-LEO-T8585-.html?setCurrencyId=2 ) [I have no idea what digitizer means..i always thought it's the same as the touchscreen itself but that's not true.]
Or I find things like this LCD+Touchscreen or even cheaper this .
I know I need the big connector cable as mentioned in the first link of the digitizer offer but here the connector cable is suddenly on the side and not down to the keys...
Well,but it's the whole display package so I guess I need this...
I already have the right screwdriver for this work but I'm still not sure what to do/if it worth it.
Ok,the 70 Euro plus shipping..that's cheap but on the other hand the HD2 is already a bit old (but I still love Windows mobile and what do keep that).
So..any clues..suggestions?

my suggestion is to go for.. buy any LCD+Digitizer pre-assembly pack, check this videos link
and try by your self..
also many informations about the procedure you will find here link2
or here link3
take your time and you will be successful repair it at your own..

Thanks your these links but the thing is..I already know them and tried it as far as I could (which is why I already have the right screw driver for it). In the end I just scratched it more and more...
The thing is..I'm not really good at this - especially the display removing and heating part of the job. So I thought I could bypass that by simply replacing the whole display unit. Ok,still 70 Euro if I chose the second ebay link but that's way cheaper than the other ebay offer plus really really cheap compared to these send-in repair shops from the internet (about 200 euro then).
I'm just not sure if these are the right components or if there is a cheaper offer somewhere else.

I bought my LCD+Digitizer for 55USD with the shipping costs, from ebay.com.
It was from a China seller, not an OEM item for sure, but after all, my LCD was as a new one!!!
I also needed an adhesive tape like this one.
you should remember that you will need to detach the LCD+Digi from the middle metal plate frame bezel
and the only way is with heat. I tried with a hair drier..
And all went as is should be..

I'm sorry to dig this thread up but I just found my old HD2 and wondered if I could get it back to work.
Of course I need a new battery and stuff but actually it's still ok.
The concerning part is the glued display and the heat you need but now the HD2 gets older and the prizes drop so I saw a complete display (the glass, the screen and the touchpad-layer) on amazon for 60 euro.
Would you go for it?
I'm not quiet sure how to disamble the device but there are videos for that. And then it should work, right? There is no glue or duct tape or anything involved if I swap the whole display-component, right?

Raizm said:
I'm sorry to dig this thread up but I just found my old HD2 and wondered if I could get it back to work.
Of course I need a new battery and stuff but actually it's still ok.
The concerning part is the glued display and the heat you need but now the HD2 gets older and the prizes drop so I saw a complete display (the glass, the screen and the touchpad-layer) on amazon for 60 euro.
Would you go for it?
I'm not quiet sure how to disamble the device but there are videos for that. And then it should work, right? There is no glue or duct tape or anything involved if I swap the whole display-component, right?
Click to expand...
Click to collapse
From the research I've done you'll need either super glue or 3m double sided tape.
Sent from my NexusHD2 using xda premium

Need some help, dead digitizer or what??

Hey guys, I need some opinions about my problem, check my video http://www.youtube.com/watch?v=yeApacv5_gE&feature=youtu.be
I think it's digitizer fault but before buy new one I need to be at least 90% sure its digitizer, tried to load many roms, pds fix...

Anyone? Somebody must know

Well honestly it is hard to say without actually having your phone here. But you can almost be sure of this. It is most likely either the digitizer or the multi pin socket that the digitizer plugs into. I am working on one right now that went into a swimming pool and the socket is bad. It does the exact same thing as yours with any digitizer that I try. I'm currently looking for a way to remove the corrosion from the inside of that sucker. Gotta find some kind of spray. I can't seem to get it good enough with emery cloth or scraping... On the other hand I've replaced the digitizer and fixed this same issue on my sons Atrix.
In case you decide that you want to try to replace it here are 2 on Ebay that have the frame built in. Link1 Link2 So far I've bought 3 that were assembled this way and it is so much easier than buying a ditizer alone. No messing with double sided tape or worrying about backlight bleed.
Hope you can get some relief.

Dude, I've got the same in the same places! It have to be factory defect... there is too much digitizer problems...

Yes its very good smartphone but too much bad digitizers disqualify it, so JdgM3NT4L sometimes when I squeeze frame bottom of the screen works fine but only for few moments, so there are three options: need to replace adhesive sticker, replace digitizer and pin socket. Damn even if I want sell Atrix for parts I am not sure if all of them are fine

I used to get that a lot, phantom touches that make the phone useless until I turn the screen off and back on.
Cannot say for sure but when I stopped using alcohol wipes to clean the screen and reduced the amount of static it was exposed to (keeping it polyester pant pockets seemed to make it worse believe it or not!), it seemed to pretty much stop.. now I've gone months without the issue.

lvl18 said:
Yes its very good smartphone but too much bad digitizers disqualify it, so JdgM3NT4L sometimes when I squeeze frame bottom of the screen works fine but only for few moments, so there are three options: need to replace adhesive sticker, replace digitizer and pin socket. Damn even if I want sell Atrix for parts I am not sure if all of them are fine
Click to expand...
Click to collapse
Well, the socket is on the motherboard, so no replacing that... For 30 bucks, I would try the digitizer. I should have explained the part about water damage. That's one of the few ways that the socket would have been damaged. That's kind of what I was eluding to when I mentioned not having your phone here. If I had it here I would know the history and whether or not it had water damage, etc. My apologies for not being more clear about that. I just don't want you to buy the digitizer and then be upset because I told you to leap right in. In my humble opinion. A new one will probably take care of the problem. 90% if I had to call it.
I wish you the best of luck. And if you have any problems installing it shoot me a pm and I'll be glad to Skype or email to help you get through it.

Thanks, my Atrix never saw water. I just dissasembly phone for every single part and cleaned all socket with alcohol. Put back together but no result. I'll try replace digitizer with frame from ebay, it's risky but hope it will solve the problem.

Its the digitizer I'm 99 percent sure I had an identical problem. Dead zones and the phantom touches. Replaced the digitizer and problem solved. I believe the digitzer design is bad for our phone and is prone to this kind of failure
Sent from my MB860 using xda app-developers app

[Q] Cracked screen. Best option.

Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.

WestAussie said:
Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
Click to expand...
Click to collapse
use a hairdryer for loosening the adhesive to separate glass and digitizer , being patient is the key but there is a good chance of messing it up

It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P

pietro_spina said:
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
Click to expand...
Click to collapse
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app

WestAussie said:
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Mine had a battery.
This is the part I bought.
OEM LG Nexus 4 E960 LCD Screen and Digitizer Assembly with Front Housing and Battery
from this page (they ship out of Hong Kong)
http://www.etradesupply.com/lg/android-models/lg-nexus-4-e960-parts.html but it appears to be out of stock now. (Maybe I got the last one)
Like I said, it was pricey, but i couldn't risk me screwing it up further since I run my architecture firm with this phone. I was looking for a minimal down time solution because the alternative for me was just buy a new phone in a retail store the next day. Not having access to the lower parts of my screen was seriously limiting. I slogged away for a week using all sorts of work-arounds to activate the dial pad, use parts of the keyboard etc while I waited for the replacement part.
This guy http://www.youtube.com/watch?v=AZDAIgwbXk4 does not show the heating stage but he is so freaking calm, it can't be that bad... Do remove the main board before prying on the battery if you go that route...
-p

I just want to add, for anyone finding this thread, that the part I got from etradesupply.com has some pretty obvious yellowing of the screen. This screen was either removed from someone else's n4 because of this defect or taken from the reject bin at the factory.
In the future if I have any breaks, I will sent it to an LG facility.

Does anyone know of another place to buy the front screen with housing? It is OOS at etradesupply....

Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm

pietro_spina said:
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
Click to expand...
Click to collapse
Thanks... looks like mixed reviews about this company, though.

Samsung Galaxy S3 I9300 - Extra Screen Replacement Information

My Ex droped her Phone and it had Spider Webs all accross. Her Provider send it in to see what it would cost to fix. The Phone also would stop working correctly in the middle of calls.
It turns out buying a new one would have come cheaper atleast thats what came back as a answear.
So I decided to bite the apple and try replacing the Screen myself. My Ex was not happy because she thought with the second Problem it is not worth the effort to fix the Screen and maybe loose everything. My reasoning was that when the Spider Web Screen touches the Digitizer it will react strangely. So I went ahead and searched the web on how to do it. I ordered a Screen for $9 on ebay (free shipping) which came with a couple of Tools. More on those later.
One of the first Problems I found was that all instructions that I found showed the beginning and the end. But in the middle how the phone will look like when the glass is finaly taken off, I was unable to find much Information about it. Also doing it Redneck style without Special liquids and or a heat guns was no where to be found.
I decided to just try it. Disasembly is well documented and easy enough to do on this device. Atleast to the Point where most electronics are removed so that you can apply heat without too much problems. I decided on using a blow dryer to heat up the Display. I layed the Blow Dryer on the Counter turned it on and Held the phone up to it. Thinking if my fingers get too hot chances are it is too hot for the Display too.. Might be a little incaccurate to read the temperature like that but hey it worked. But soon after I started to remove the first pieces of broken glass I ran into Problems.
As per instructions I found, I put a Piece of tape accros the Screen so that the individuall pieces stayed ogether. That did not work at all for me. It just made the individual pieces push against the valuable digitizer below it. My next Problem was that the Tools that came with the replacement glass, especially the Little plastic Tools did not hold up to the Job und the tip was soon useless. I had to Switch to a Raizor blade. A couple of times I sliped and hit the Digitizer. Thinking oh well I guess I Need to get a new one. Luckely on the end it all worked out much better then I would have hoped. The left over glue I rubbed mostly off with my finger which worked out nicely. To clean it completely from ist glue took some time. The black rubber allong the side of the phone allso suffered. You might want to look out that that does not get riped out completely. I had enough left over so that the glass would sit on it good enough luckely.
Take a look at these Pictures and remember it works perfectly again for $9. While it is not for everyone to seperate a Glass from a Digitizer it is acctualy less fragile as you might think. The third Picture Shows you how it looked with all the scuff marks from taking off the glass. You can still see a few little marks on the end but hard to notice and much better then before. I am sure next time I will be more carefull and use the blade from the beginning on.
I got more Pictures and will improve this Thread for others that have to go through it. Feel free to PM me if you have any Questions. A list of other resources will also be included. This is only to explain and Show the bare state.

Reserved for links
Additional Screen Replacement Links:

Do you know if we can replace the metal frame on the side?
My device is bent. I mean. I fell on a rock with my device in my pocket and the rock directly hit the phone. Luckily I had a hsrd case and the device is still alive.
Sent from my GT-I9300 using Tapatalk

supreethms said:
Do you know if we can replace the metal frame on the side?
My device is bent. I mean. I fell on a rock with my device in my pocket and the rock directly hit the phone. Luckily I had a hsrd case and the device is still alive.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You should be able to find a new Frame for a resonable Price. Now to remove the digitizer from the Frame that is another Story. Not sure if it was the Glue or what Held it in place but I could not figure out how to get that out. luckely the two Buttons at the bottom survived the Screen removal and so I did not hat to take the Digitizer out.

Useful information and explains why repair shops will usually only replace the complete assembly. Read many complaints that those cheap ebay screens are plastic and easily scratched, not genuine gorilla glass replacements?
Sent from my GT-I9300 using Tapatalk

http://www.ebay.co.uk/itm/150998824149?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I've ordered one of these as mines a bit scuffed and what looks like a small crack in it.

boomboomer said:
Useful information and explains why repair shops will usually only replace the complete assembly. Read many complaints that those cheap ebay screens are plastic and easily scratched, not genuine gorilla glass replacements?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
It is definetly cheaper then the original but if you have done it once. Chances are You will be able to do it again much easier. So if the $9 Glass only holds for example a Year. You can just replace it again. Or spend a little more for a original replacement glass.
Now I should Point out if the rubber seal around it gets damaged in the process and if the 3M Tape that should come with the Screen is placed wrong it will Impact the sensitivity of the sreen touches. I guess I did it right because my Ex is happy how it performs and that is saying allot.

madmackem said:
http://www.ebay.co.uk/itm/150998824149?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I've ordered one of these as mines a bit scuffed and what looks like a small crack in it.
Click to expand...
Click to collapse
If you get down to removing the digitizer from the Frame take a couple of Pictures and post them here.