Related
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
bump- I searched and didn't find anything helpful. I've tried 3 different roms
"Can't find misc" should only appear if you don't have a misc partition in NAND. (which is created when flashing CWM)
And nand kernel open failure probably means theres no zImage or initrd.gz in the boot partition.
Try flashing CWM from the CWM thread and then a ROM.
Gabe3 said:
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
Click to expand...
Click to collapse
How did you transfer the zip file to SD? Did you use magldr? If so try re-transfering using your comp, as Magldr sometimes corrupts them.
Ricey
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
d34thd34l3r said:
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
Click to expand...
Click to collapse
just redo everything. that fixed it for me.
Bump.
Did a clean install of TyphooN CyanogenMod 7 Nightly v3.3.1 and got the "nand kernel open failed" error.
I formated the SD-Card two times, reinstall cwm 150mb partition 3 times and still get the same error, first time within almost 1 year of android on my HD2 ._.
Any ideas or solutions welcome.
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Likewise i am getting it with hyperdroid v12
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
[★] said:
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
Click to expand...
Click to collapse
i say you have to do a clean wipe starting fro scratch task 29 it ad redo
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
me too same massege
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
Typhoon doesn't use 250mb CWM, use the one provided with rom 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), most "nand kernel open failed" are down to wrong CWM size
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
cludseph said:
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
Click to expand...
Click to collapse
150mb for sense rom is definitely to low!
Read the rom's thread carefully guys!
It says there what CWR partition is needed.
Sense roms need SD CARD PARTITION so read the thread (it's first page).
If you have read it and your CWR partition looks exactly as it was given in the rom's thread then do task29, hspl, magldr 1.13 and CWR.
If it still doesn't work try different roms or try CLK.
Thanks for the response. How do I create a 5/240/5 partition through CWR? The last partition I made was just installed through .zip on CWR. Sorry for the questions, new to the hd2.
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Hi guys, i had the same problem, and i figured maybe i can show u what i did, to help u.
i went to THIS thread and followed the instructions:
"Installation Guide for MAGLDR 1.13"
the error occured right after i flashed the MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip onto my HTC HD2.
the only thing i had to do was enter magldr boot menu (hold off button while booting)
then i choose AD RECOVERY
CWM started up and i choose install zip from SD card
ofcourse i have placed NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip onto the ROOT of my SD card previously.
the .zip file installed perfectly and then i rebooted my phone.
all was ok after that..
hope this helps!
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Awww, that was my mistake. It's working with the MAGLDR version now. Thanks for pointing that out
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
No we do not, thank you, this helped.
i've recently flashed the MDJ's cyanogen 2.6 onto my HD2. If i wanted to update rom using CWM how do i backup etc.. will i have to partition my SD or not? I'm quite unsure on how to use it in general and would be grateful if someone could fill me in on the basics.
thanks
If you are using a CWM 1.3 partition (installed to NAND) with magldr 1.13, then to get to CWM Recovery you go to option 8: AD Recovery on magldr menu. Then in CWM go to "backup and restore" and backup your rom. You can obviously restore it from here later if needed.
To flash a rom, go to "install rom from sd card", then select the zip file from its location on the sd card and choose install. Pretty simple really once you get the hang of it.
brinks08 said:
i've recently flashed the MDJ's cyanogen 2.6 onto my HD2. If i wanted to update rom using CWM how do i backup etc.. will i have to partition my SD or not? I'm quite unsure on how to use it in general and would be grateful if someone could fill me in on the basics.
thanks
Click to expand...
Click to collapse
Please refer to this link.
http://forum.xda-developers.com/showthread.php?t=906937
Thanks for the help!
i have hd2 512 eu version. Magldr 1.13 installed and so is CWM 3.
recently i accidentally dropped my phone and now the usb connection/sync is not working because of the connectors being broke.
i would like to know if their is any way possible other then using DAF if i could flash my HD2 with 400M recovery since i accidentally flashed it with 130M recovery just before it being broke.
i cant install GINGERBREAD since it needs more then 130M partition on the phone and no GINGERBREAD out on XDA supports the use of SD card as phone memory. i have tried more then 6 gingerbread's using CWM mode but no luck.
currently i have * [CWM] RAFDROID HD 3.0|Fastest Full DesHD|DATA2EXT|[Kern:Rafpigna 1.7 OC] installed on my phone.
http://forum.xda-developers.com/showthread.php?t=908528
Please helppppppp
hkdurrani said:
i have hd2 512 eu version. Magldr 1.13 installed and so is CWM 3.
recently i accidentally dropped my phone and now the usb connection/sync is not working because of the connectors being broke.
i would like to know if their is any way possible other then using DAF if i could flash my HD2 with 400M recovery since i accidentally flashed it with 130M recovery just before it being broke.
i cant install GINGERBREAD since it needs more then 130M partition on the phone and no GINGERBREAD out on XDA supports the use of SD card as phone memory. i have tried more then 6 gingerbread's using CWM mode but no luck.
currently i have * [CWM] RAFDROID HD 3.0|Fastest Full DesHD|DATA2EXT|[Kern:Rafpigna 1.7 OC] installed on my phone.
http://forum.xda-developers.com/showthread.php?t=908528
Please helppppppp
Click to expand...
Click to collapse
None that I'm aware of.
How to update jellyblast rom using CWM
I have flashed jellyblast v3 on my samsung galaxy y but the ota updates usually fails to update can you please help me how to update the rom using CWM??
This is a very old thread, of a problem for the HTC HD2. You have a samsung sth, why are you posting here and reviving a very old thread? anyway here is how (we do it):
You should download the ROM's update .zip, copy it to your sdcard, then boot into cwm and select "install zip from sd" or something like that, and finally select the newly copied zip and go through installation.
hi guys
so yesterday i decided to update my miui rom and when i installed the new update through magldr CMR, hd2 won't go in android now its getting stuck on the HTC splash screen all the time i tried many different roms and i even went back to WM and then reflashed magldr and CMR thought that might fix the problem but it didn't so can u guys help me out
I was running the NDT MIUI GINGER V12.0 and i tried to update it to V14.0 and thats where the whole issue started
so help me out guys thanks
jimprime said:
hi guys
so yesterday i decided to update my miui rom and when i installed the new update through magldr CMR, hd2 won't go in android now its getting stuck on the HTC splash screen all the time i tried many different roms and i even went back to WM and then reflashed magldr and CMR thought that might fix the problem but it didn't so can u guys help me out
I was running the NDT MIUI GINGER V12.0 and i tried to update it to V14.0 and thats where the whole issue started
so help me out guys thanks
Click to expand...
Click to collapse
Hi,
Are you setting the correct CWM partition for the ROM and your phone?
am not sure i understand, if the same rom's older version was working properly why do i need to change the CWM partition for the next version
and also can u link me to the thread which can show me how to change the partition of the CWM recovery
thanks
jimprime said:
am not sure i understand, if the same rom's older version was working properly why do i need to change the CWM partition for the next version
and also can u link me to the thread which can show me how to change the partition of the CWM recovery
thanks
Click to expand...
Click to collapse
Hi,
Reading through the [OP] of your ROM,it appears that you don't need to change your partition,but having tried various other ROMS,it's best to start fresh.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open the toolkit.
Choose magldr repartition,choose 150MB and cache 5MB.Press repartition.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
malybru said:
Hi,
Reading through the [OP] of your ROM,it appears that you don't need to change your partition,but having tried various other ROMS,it's best to start fresh.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open the toolkit.
Choose magldr repartition,choose 150MB and cache 5MB.Press repartition.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
How do you restore your data after doing all this?
Today I downloaded the Nexus HD2-Gingerbread V2.8 and moved it to my SD card, I then went in to MANGDLR and to AD Recovery>Install Zip From SD Card>Choose ZIP From SD then selected the zip file. Everything loaded fine but when I restarted it sat on the green "HTC" screen for over 30min so I decided to wipe everything by reinstalling stock WinMo 6.5 then started from scratch with re-installing MANGDLR and ClockWorkMod then tried again and got the same result. Any Ideas?
sh1fty7 said:
Today I downloaded the Nexus HD2-Gingerbread V2.8 and moved it to my SD card, I then went in to MANGDLR and to AD Recovery>Install Zip From SD Card>Choose ZIP From SD then selected the zip file. Everything loaded fine but when I restarted it sat on the green "HTC" screen for over 30min so I decided to wipe everything by reinstalling stock WinMo 6.5 then started from scratch with re-installing MANGDLR and ClockWorkMod then tried again and got the same result. Any Ideas?
Click to expand...
Click to collapse
Hi,
What HSPL did you use?
What radio did you use?
What size CWM partition did you use?
malybru said:
Hi,
What HSPL did you use?
What radio did you use?
What size CWM partition did you use?
Click to expand...
Click to collapse
Yes, it's really important what CWM partition you use. You should post those info's when asking, which makes it easier to answer your question
sh1fty7 said:
Today I downloaded the Nexus HD2-Gingerbread V2.8 and moved it to my SD card, I then went in to MANGDLR and to AD Recovery>Install Zip From SD Card>Choose ZIP From SD then selected the zip file. Everything loaded fine but when I restarted it sat on the green "HTC" screen for over 30min so I decided to wipe everything by reinstalling stock WinMo 6.5 then started from scratch with re-installing MANGDLR and ClockWorkMod then tried again and got the same result. Any Ideas?
Click to expand...
Click to collapse
a) Do task29
b) Install MAGLDR
c) Install correct CWM partition
d) properly format your sd card (sdformatter full>overwrite with size adjustment)
e) partition card with CWM (if needed)
f) copy rom zip over and flash.
Sorry
What I meant to say is I was upgrading from V2.7 to V2.8. I ended up re-flashing V2.7 then rebooting back into MANGDLR and then flashing V2.8 and it worked. Trial and error I guess. What do you guys think it could have been?
Market Place Download Issue
Is anyone else having issues downloading from the marketplace? I am able to go online and send something to my phone and it will install but if I go through the marketplace on my device I get an error message "Download was unsuccessful, please try again" when downloading or updating an app. Help please.
Device: HTC HD2
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
Bootloader: cLK 1.4.0.1
Recovery: ClockworkMod Recovery 3.2.0.0
Android ROM: NexusHD2-Froyo V1.9G NAND (Android 2.2.2) | Kernel: tytung_r10_oldcam
Android ROM: NexusHD2-Gingerbread V2.8 NAND (Android 2.3.4) | Kernel: tytung_r10
Unable to download from the market.
Okay so after researching this issue online and seeing that the common fix is reformatting the SD card and partitioning I recalled an article about Windows Phone 7 locking up SD cards so that they were unusable to any other device. They were taking advantage of what Secure Digital was designed for. People were trying to reformat cards using computers running Windows and Linux and other devices but nothing worked. Eventually someone remembered that Nokia still gives their devices full SD permissions and formatting the SD card with a Nokia device fixed the SD card and allowed it to be used in another device. I decided that if it could do that maybe my Nokia N8 could solve my SD issues too. So instead of going through the lengthy processes I was seeing online I popped the SD card into my N8 and formatted, it worked like a charm. So although Nokia has disappointed me time and time again they do some things right, thank you Nokia.
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN CyanogenMod 7 .zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN CyanogenMod 7 .zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
Hi,
It seems that you have done everything correctly.
Did you transfer the ROM to your card by cable or card reader?
Try putting the ROM on to your card by card reader,and re-installing the ROM.
malybru said:
Hi,
It seems that you have done everything correctly.
Did you transfer the ROM to your card by cable or card reader?
Try putting the ROM on to your card by card reader,and re-installing the ROM.
Click to expand...
Click to collapse
Hi, thx for replying. I tried to transfer the zip file by the magldr mass storage but it keeps hanging. I had to flash to the stock rom to transfer the zip file. i re-installed 3 times and finally gave up.
After installing the MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), i used the boot android from sd and it could not locate the initrd and zimage. after putting those file into the card, i was able install it. But failed to load the kernel thingy.
Thanks
Wrong thread.
hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN CyanogenMod 7 .zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
I would recommend searching the forum for a thread specifically for [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], seeing as this thread is specifically for [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10]. You might want to try the NexusHD2-Gingerbread V2.8 ROM it is flawless . Here is the link: http://forum.xda-developers.com/showthread.php?t=905060
:victory:****** Solved *******
Hi, thank you for all of your help and assistance.
It was all down to selecting the correct partitions (and me getting over enthusiastic in flashing roms and not reading FULLY on how and what partitions are required)
I have used HD2 Nand toolkit, and partitioned MAGLDR, then partitioned SD card within Clockworkmod.
Thank you all again for pointing me in the right direction...
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
matt_tee said:
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
Click to expand...
Click to collapse
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Marvlesz said:
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Click to expand...
Click to collapse
Thanks,
I will give it a go!
Have already downloaded toolkit, and just watching the video on how to use...
Matt:fingers-crossed:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
try the links below, it might help
matt_tee said:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
Click to expand...
Click to collapse
I don't use magldr, so I am not sure.
But I think you have to "MAGLDR recovery update" first, and then after it finishes you have to "magdlr repartition". Im not sure though.
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
After Task29 (don't do task29 again) you have to do the following: http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 until you see the "recovery" .. from there, dont continue to flashing wp7, just put your rom on your sd and flash it from recovery. (don't forget to thank the the one who made the thread/guide)
Don't forget to NOT use 300mb, but use the one written on your rom's thread.
matt_tee said:
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
Click to expand...
Click to collapse
You can't have CWM without MAGLDR. If you've flashed CWM you shouldn't have lost MAGLDR at all, so I don't know what you did wrong. Task 29s are also almost always useless and unnecessary, if a guide says 'task 29' as the first step then usually you can just skip that part. I find that the best guide is the one in my sig, try it out.