Database Users

nand kernel open failed

after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.

bump- I searched and didn't find anything helpful. I've tried 3 different roms

"Can't find misc" should only appear if you don't have a misc partition in NAND. (which is created when flashing CWM)
And nand kernel open failure probably means theres no zImage or initrd.gz in the boot partition.
Try flashing CWM from the CWM thread and then a ROM.

Gabe3 said:
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
Click to expand...
Click to collapse
How did you transfer the zip file to SD? Did you use magldr? If so try re-transfering using your comp, as Magldr sometimes corrupts them.
Ricey

I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\

d34thd34l3r said:
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
Click to expand...
Click to collapse
just redo everything. that fixed it for me.

Bump.
Did a clean install of TyphooN CyanogenMod 7 Nightly v3.3.1 and got the "nand kernel open failed" error.
I formated the SD-Card two times, reinstall cwm 150mb partition 3 times and still get the same error, first time within almost 1 year of android on my HD2 ._.
Any ideas or solutions welcome.

and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^

Likewise i am getting it with hyperdroid v12

I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S

[★] said:
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
Click to expand...
Click to collapse
i say you have to do a clean wipe starting fro scratch task 29 it ad redo

bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
me too same massege

bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
Typhoon doesn't use 250mb CWM, use the one provided with rom 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), most "nand kernel open failed" are down to wrong CWM size

I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?

cludseph said:
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
Click to expand...
Click to collapse
150mb for sense rom is definitely to low!
Read the rom's thread carefully guys!
It says there what CWR partition is needed.
Sense roms need SD CARD PARTITION so read the thread (it's first page).
If you have read it and your CWR partition looks exactly as it was given in the rom's thread then do task29, hspl, magldr 1.13 and CWR.
If it still doesn't work try different roms or try CLK.

Thanks for the response. How do I create a 5/240/5 partition through CWR? The last partition I made was just installed through .zip on CWR. Sorry for the questions, new to the hd2.

do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android

musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Hi guys, i had the same problem, and i figured maybe i can show u what i did, to help u.
i went to THIS thread and followed the instructions:
"Installation Guide for MAGLDR 1.13"
the error occured right after i flashed the MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip onto my HTC HD2.
the only thing i had to do was enter magldr boot menu (hold off button while booting)
then i choose AD RECOVERY
CWM started up and i choose install zip from SD card
ofcourse i have placed NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip onto the ROOT of my SD card previously.
the .zip file installed perfectly and then i rebooted my phone.
all was ok after that..
hope this helps!

musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Awww, that was my mistake. It's working with the MAGLDR version now. Thanks for pointing that out

musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
No we do not, thank you, this helped.

How can I use cwm recovery with dandiest's desire z rom?

I have a problem I can't understant how the new maglar recovery can be used? Someone please help me it is posible to have dandiest's desire z rom ( wich is daf) and cwm recovery at the same time?

sp33dy_gtx said:
I have a problem I can't understant how the new maglar recovery can be used? Someone please help me it is posible to have dandiest's desire z rom ( wich is daf) and cwm recovery at the same time?
Click to expand...
Click to collapse
You have to partition your SD card (gparted/ubuntu...)
1st: fat32 put the rom-zip into the root of this partition
2nd: ext4 1GB
3rd: ext4 400MB
4th: linux swap
Install CWR via MAGLDR like flashing a NAND rom (DAF etc...)
reboot, enter MAGLDR and goto boot AD SD - now U enter CWR
and then follow the steps as mentioned in the rom thread. (chose ZIP dfrom SD card... install... reboot...)
Good luck
It´s quite easy.

The above post will work UNLESS you use one of the cwm 1.3 partitions. Using cwm 1.3 puts the recovery files on NAND (so no need to copy files to the root of your sd card for recovery to work. In order to boot into Recovery you need to select AD Recovery instead of Boot AD SD

ClydeB1 said:
The above post will work UNLESS you use one of the cwm 1.3 partitions. Using cwm 1.3 puts the recovery files on NAND (so no need to copy files to the root of your sd card for recovery to work. In order to boot into Recovery you need to select AD Recovery instead of Boot AD SD
Click to expand...
Click to collapse
Sry, maybe I missunderstand the OP. Sounded for me like he has trouble to get installed DesireZ by using ClockWork AND trouble when installing Clockwork.

So let me conculde if I want to use this rom http://forum.xda-developers.com/showthread.php?t=913597 I cant I must use a rom with zip no? to be clear. thx guys

sp33dy_gtx said:
So let me conculde if I want to use this rom http://forum.xda-developers.com/showthread.php?t=913597 I cant I must use a rom with zip no? to be clear. thx guys
Click to expand...
Click to collapse
Try and follow this I found by searching for clockwork mod in the thread.
http://forum.xda-developers.com/showpost.php?p=10717996&postcount=603

[Q] Please help. Can i use Flash Recovery 400M using MAGLDR 1.13 or CWM ?

i have hd2 512 eu version. Magldr 1.13 installed and so is CWM 3.
recently i accidentally dropped my phone and now the usb connection/sync is not working because of the connectors being broke.
i would like to know if their is any way possible other then using DAF if i could flash my HD2 with 400M recovery since i accidentally flashed it with 130M recovery just before it being broke.
i cant install GINGERBREAD since it needs more then 130M partition on the phone and no GINGERBREAD out on XDA supports the use of SD card as phone memory. i have tried more then 6 gingerbread's using CWM mode but no luck.
currently i have * [CWM] RAFDROID HD 3.0|Fastest Full DesHD|DATA2EXT|[Kern:Rafpigna 1.7 OC] installed on my phone.
http://forum.xda-developers.com/showthread.php?t=908528
Please helppppppp

Just answered your other post. AFAIK there is no way to currently flash another partition size without usb.

thanks you

[Q] Can't install Clockwordmod recovery (nand kernel open failed)

I have a european HTC HD2 running MAGLDR 1.3 and I cannot install Clockworkmod under any circumstances. I've been running MDJ's Cyanogenmod 7 for weeks now and have the correct radio and hspl, but every time I attempt to flash clockwork I get a message saying NAND kernel open failed when I try to boot AD Recovery. I've tried both the NAND boot and the old style SD boot with no luck whatsoever. I'm now totally stumped and unable to get any of the new ROMS. Thanks in advance for any help you can give.

Can you give us the exact steps you have taken?
This way we can see if you missed something.

Thanks for the response,
Installed radio and hspl, then magldr 1.11 (this is the setup I'd been using for a while). Today I tried to install clockworkmod so I upgraded to magldr 1.13 at the tri color screen. That seemed to work fine, all the functions working perfectly. I then downloaded cwm 1.3 150mb and tried to install (USB flash, ran as admin etc.) The install seemed to go alright but when I tried to boot into recovery I got the error message. I ran into the same problem using the method where you put files on the SD first and using the script to install magldr 1.13 and cwm one after the other.

i had problems with cwm 150 installer. i ended up getting the 250 meg version, and editinf flash.cfg, worked first time.

Did you use AD SD or AD Recovery (option 8 )?
AD Recovery is the one to use.
t3h_cookie_monster said:
Thanks for the response,
Installed radio and hspl, then magldr 1.11 (this is the setup I'd been using for a while). Today I tried to install clockworkmod so I upgraded to magldr 1.13 at the tri color screen. That seemed to work fine, all the functions working perfectly. I then downloaded cwm 1.3 150mb and tried to install (USB flash, ran as admin etc.) The install seemed to go alright but when I tried to boot into recovery I got the error message. I ran into the same problem using the method where you put files on the SD first and using the script to install magldr 1.13 and cwm one after the other.
Click to expand...
Click to collapse

I've used both and neither worked, they both result in nand kernel open failed. Its unable to find initrd or the other file no matter what i do.

Sounds like the file recovery.raw (or is it recovery.img, i forget) didn't get flashed, please confirm there is a recovery image included with the cwm files you are installing, and also please paste us the contents of your flash.cfg. file.

Try flashing 400mb clockwork mod.most roms require this mod and it does work
Sent from my HTC HD2 Gingerbread using XDA App

I got it to work by using the 250mb version with edited flash file! Thanks a lot for all the help.

arzin said:
Try flashing 400mb clockwork mod.most roms require this mod and it does work
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
hello, Im currently having the same problem...how did you edit the flash size?

Oaraujo said:
hello, Im currently having the same problem...how did you edit the flash size?
Click to expand...
Click to collapse
open the file flash.cfg in notepad on the pc, edit the number in the system line (you will see what i mean when you see it) change it, save it, flash it.

nand kernel open failed
you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android

Same problem with NAND karnel fails
I bought my HTC HD from my friend at work, it had installed, android aMAGLDR V1.13 I had a problem to erase my friends gmail account from the phone and when ever i connect to the Internet his account appears to log on and sync, I tried to reset the phone but I failed, now I tried ti flash the android regarding gunjahman's Flashing a new nand android rom over a previous one http://forum.xda-developers.com/showthread.php?p=11302885#post11302885
and I flashed with Recovery_400M and now I'm in Boot menu and can't get it to boot or anything else.
Can please anyone help me???

[Q] Hd2 Magldr Android is stuck on HTC splash screen

hi guys
so yesterday i decided to update my miui rom and when i installed the new update through magldr CMR, hd2 won't go in android now its getting stuck on the HTC splash screen all the time i tried many different roms and i even went back to WM and then reflashed magldr and CMR thought that might fix the problem but it didn't so can u guys help me out
I was running the NDT MIUI GINGER V12.0 and i tried to update it to V14.0 and thats where the whole issue started
so help me out guys thanks

jimprime said:
hi guys
so yesterday i decided to update my miui rom and when i installed the new update through magldr CMR, hd2 won't go in android now its getting stuck on the HTC splash screen all the time i tried many different roms and i even went back to WM and then reflashed magldr and CMR thought that might fix the problem but it didn't so can u guys help me out
I was running the NDT MIUI GINGER V12.0 and i tried to update it to V14.0 and thats where the whole issue started
so help me out guys thanks
Click to expand...
Click to collapse
Hi,
Are you setting the correct CWM partition for the ROM and your phone?

am not sure i understand, if the same rom's older version was working properly why do i need to change the CWM partition for the next version
and also can u link me to the thread which can show me how to change the partition of the CWM recovery
thanks

jimprime said:
am not sure i understand, if the same rom's older version was working properly why do i need to change the CWM partition for the next version
and also can u link me to the thread which can show me how to change the partition of the CWM recovery
thanks
Click to expand...
Click to collapse
Hi,
Reading through the [OP] of your ROM,it appears that you don't need to change your partition,but having tried various other ROMS,it's best to start fresh.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open the toolkit.
Choose magldr repartition,choose 150MB and cache 5MB.Press repartition.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.

malybru said:
Hi,
Reading through the [OP] of your ROM,it appears that you don't need to change your partition,but having tried various other ROMS,it's best to start fresh.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open the toolkit.
Choose magldr repartition,choose 150MB and cache 5MB.Press repartition.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
How do you restore your data after doing all this?