Related
3rd thread, about 4th rom flashed
constant issues with builds. have gone from stock to:
cm 6.1.3 -apps crashing, random crash notices i.e "phone book has crashed force close" - "the process com.android.phone has stopped unexpectedly"
cm 7 - random reboots, opening browser caused power cycle, wifi issues, lag (thread posted, no solutions at the forefront)
currently on tripnraver pre release. now another issue. no signal what so ever.
original baseband on this xperia x10a is .55. it is suggested to use with bands 52 or 49.
loading either of these basebands. which ive done. doesn't seem to fix the no signal problem. the description states should be backwards compatible even if appropriate bb is not installed on device. yet no luck.
attempting to flash either baseband fails to resolve this problem. currently trying to flash back to stock and try another full reinstall and baseband flash in flashtool.
any ideas would be a great help. having to flash x number of times between roms is getting quite time consuming
thanks everyone.
if you want to stay on the miui rom, you can flash the baseband patch located here and stay on whatever baseband works best for you (I'm on .55 and find it fantastic), then when you load the rom, go to dev tools>bad behaviour>crash the system server.
http://forum.xda-developers.com/showthread.php?t=1011608
Otherwise, I would recommend wolfbreaks cm 6.1.3, as it is the most stable. You must have done something wrong during installation as I never had an issue with his roms.
The only issue I have ever had with any rom is MiUi and thats because I used the wrong baseband. You must be doing something wrong for you to be having problems
if you want, try this flash, it's trips miui pre-final with the baseband patch implemented.
http://www.multiupload.com/KCKE9K2WKN
worked with my .54 baseband
thanks so much for the links to the baseband patches. i remember coming across a thread that posted it but unfortunately forgot to book mark. so im definitely going to go ahead and try with the patch installed. hopefully all works well
each rom ive flashed has been done properly according to instructions. cache wiped, dalvik, and full reset as per menu options in xrecovery.
one way or another i experienced lag for the most part, and as mentioned some random crashes. never had reset on wolfs rom just error messages at times. trips rom worked excellent, smooth and quick. hopefully with the patch implemented everything will work flawlessly
thanks you guys
*Updated
Flashed over rom with baseband patch. signal working. everything running smooth.
except for when using camera zoom. zoom default displays 0x. as soon as the option is selected it spawns an immediate force close
any patches? or similar outcome for anyone else?
i will outline my steps below so everyones up to speed on how i performed this flash.
- flashed back stock in SEUS
- root with one click (success)
- installed busy box (market)
- installed xrecovery apk
- booted into xrec
1. full factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
5. install custom zip from sd card
6. selected trips rom with bb patch implemented
5. reboot
Camera zoom doesn't work in most ROMs yet and the lag you were experiencing was likely just the FW "settling" it can take a little bit and a couple reboots sometimes for the phone to calibrate itself properly.
Sent from my X10i using XDA Premium App
thanks cmoney. maybe ill try my luck with cm7. give it a few reboots and hope for the best. great rom. im really loving trips iphonesque style
clean smooth and quick. everythings working great. hoping the zoom may get fixed soon enough. only other inquiry i have with regards to this rom is the apps2sd.
this feature is essential to myself personally. and it is not working as ive noticed on this rom. ive read a thread with regards to a fix for the last release. i checked the settings for an enable option in case the feature requires being manually set as active but nothing listed. within sd settings state reads as unavailable. if anyone has an answer as to whether this fix will function with the current pre release. ill be going ahead with completeling the flash and reporting what i find back on this thread.
thanks again everyone
Try Wolfbreaks rom. It's very very stable for me. It has cam and everything upto date.
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
thesoundofsilence said:
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
Click to expand...
Click to collapse
works for me on trips newest....
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
thesoundofsilence said:
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
Click to expand...
Click to collapse
I dunno man, it works fine for me, but I copied data from my 0.3.2 xrecovery image, so that might be why. try flashing that apps2sd fix for 0.3.2, should work fine
damn it. i just found that thread. found the links to the fixes. so far ive tried miui32_a2sd_fix.zip. and flashed that over with xrec prior to reboot. which did nothing.
there are two more links so im going to try those two flashes as well and hope that one of them will do the trick. if its working when utilizing .32 patches then ideally the bloody thing would have to work here. thanks for the input though dtox. much appreciated
I don't know what else to suggest man
From the feedback I see in the miui thread, everyone else is reporting it working!
Did you factory wipe, wipe cache partition, and wipe dalvik cache before install? then flash the miui 1.0.zip, and flash immediately the baseband patch then reboot into the rom.
Remember not all apps allow apps2sd so use something like android system info, go into the applications tab click on one, click manage and then see if the option "move to sd" is highlighted. Like I said check a few though, not all apps can be moved
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
thesoundofsilence said:
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
Click to expand...
Click to collapse
Try it again but without the fix...
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
thesoundofsilence said:
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
Click to expand...
Click to collapse
No idea man, like I said it is fine for everyone else so I'm so no big development will arise that will make it function with your phone....
maybe it has something to do with 10a. i dont know. but the point is it shouldn't even be doing this regardless. hypothetically if its froyo and it has apps2sd built in. it should work. its not the way ive flashed. the phone supports it. so my only conclusion the rom must not be as compatible as stated. and from reading different posts about the prev builds sometimes the patches worked at other times they didnt. and also the fact that the rom is claimed to work without the need for a bbpatch. yet without the patch instaled phone caught no single. i guess certain unexplainable glitches can be bound to happen at times but any how ill give it one last go.
if nothing comes out of that then im giving up on that build because it seems relatively hopeless.
lol I'm using an x10a...
Still man you're the only person reporting this. Don't you find that strange? What baseband are you using anyhow?
I am writing on this thread as i still cannot add to the development thread yet
I am using Elelinux-7.0.0-Hero-v2.0. Thanks Ele for a great rom.
So far the only problem i have had is once the unlock screen went invisible on me.
I had to use the patch which worked fine. no black screen. everything else works great so far.
Just trying to contribute to the developers what i can to help.
Any one else has any issue yet.
Elelinux-7.0.0-Hero-v2.0
RADIO VERSION:63.18.55.06SU_6.35.17.03
Kernel: Herokernel-12a
I've had the same issue with the lockscreen but like yourself it was a once off.
Generally the ROM is great (however, this is the first ROM that I've flashed to my hero)
The only other issue im getting is with linking facebook with my contacts; for some reason FB keeps crashing. But keep in mind that I'm a retard in comparison to what you lads know about custom roms etc..... but slowly learning!
Sent from my Hero using XDA App
same problems
I have had the same problems as you. lock screen went invisible a couple of times. and my facebook does not work quite right.
Apart from that has been very stable. no problems or reboots. works great.
Running gingerbread with honeycomb theme on my hero. running at 691mhz is well good.
I have got widgets running on every screen to.
Elelinux RC4 version 7.0 V2.0
kernel 12a
691mhz
clockworkmod.
Thanks Ele for a great rom
After installed 2.0 patch, I still get blank screen (wall paper ok, no any widgets).
The only way to solve is restart
Any thing wrong with my installation? (same spec as above post)
The Bug seems to affect some phones and not others. Might be due to different hardware but not sure.
I am a network engineer. Not a developer.
There is a patch that fixes the black screen bug which might help. You might have to delete dalvik cache first though. But as said not a developer.
I just wanted to try some different roms and loaded cronos rom yesterday and is very good. So running that at the moment.
It is really fast and stable. The fastest i have used so far. But i have not tested everything yet like GPS. But admit i am becoming a cronos fan.
Cheers.
P.s i always backup my phone first and do a complete wipe before trying a new rom. Otherwise could get problems.
I use clockwork mod.
Unfortunately the bug your getting with black screens, invisible menus etc.. is an aosp bug that affects some devices which Google are unable to fix, if you had read through the thread you would have seen this. Ele is working hard on a fix for this but as CM no longer support the hero, its unlikely many cm7 roms will see many updates.
Sent from my HTC Hero using XDA App
Everyone is hoping that Google will fix the memleak and invisible manus problem. To fix it, one needs to undersatand the big picture on how these things are managed. I think it can be done only by experienced coder.
It's a real shame. i love gingerbread and did not want to go back to 2.1 or 2.2.
But might have to if they do not fix it.
I know Ele is working hard on a fix. using his rom at the moment. Was using cronos. But suddenly started getting random reboots and battery started only lasting a few hours and could not find out why.
Thanks to all devs and help.
Elelinux 7.0 v2.1 GPS reboot issue
Hi all,
I found Elelinux 7.0 v2.1 to be almost perfect.
The only major issue so far for me is that when running applications such as sportstracker that use GPS and are running in the background, that as soon as the GPS connection is lost (for whatever reason) the phone always seems to crash.
I wonder whether anyone else has seen this issue and whether there's a way to investigate it.
E.g. is it possible ot redirect logcat to the sdcard and then analyze the log file?
Regards,
MJ
Her0 V2.1 - USB problem
This is a weird one...
I flashed to Elelinux 's fab 2.1 the usual way....
I booted into the ClockworkMod Recovery V2.5.0.7
-- wipe cache partition
-- Advanced - Wipe Dalvik Cache
-- reboot
Then again within Clockwork Recovery I choose 'Install zip from sdcard'
I select the Hero rom and it flashes perfectly...
Now the problem ----> I cant get the usb port working to enable transfer of files?
When the phone boots up it shows 'preparing sd card'
Then when i connect usb lead to pc it shows 'usb connected'
When i then pull the screen down, i see 'usb connected - select to copy files to/from your computer'
When i select that tab, it just crashes back to the home page?
I see the icon at the top of the screen but when i pull down the screen and select as above, it crashes back to home screen again?
In settings, i have both USB debugging and USB debugging notify - all enabled.
Can anyone provide a solution to this issue for me..
thank you
The only way around this problem i think is to mount usb storage from recovery.
Sent from my HTC Hero using XDA App
Hi guys,
I've tried installing CM9 from this post (With OpenGL latest version). For some reason, the status bar is not there! The same thing happened with flashing CM7 and another version of CM9. When I return to rooted stock, the status bar is back. Help????
Also, a popup comes up very very very often that says the process com.android.media has stopped working. Again, this has happened with CM7 and the other CM9 release too. This is prbly because all of the roms I was flashing were update-xxxxxx.zip.
If anyone could just link to a complete 4.0 install that wipes your apps (as opposed to an update), that would be greatly appreciated too.
Thanks,
Mathew
Mkirsch72 said:
Hi guys,
I've tried installing CM9 from this post (With OpenGL latest version). For some reason, the status bar is not there! The same thing happened with flashing CM7 and another version of CM9. When I return to rooted stock, the status bar is back. Help????
Also, a popup comes up very very very often that says the process com.android.media has stopped working. Again, this has happened with CM7 and the other CM9 release too. This is prbly because all of the roms I was flashing were update-xxxxxx.zip.
If anyone could just link to a complete 4.0 install that wipes your apps (as opposed to an update), that would be greatly appreciated too.
Thanks,
Mathew
Click to expand...
Click to collapse
The update- does not mean it is not wiping system for you, because it does. That is just a generic name. But no ROM installer wipes your installed apps, or your system app settings. The only way to do that is with a factory reset. The problems you are having probably indicates you should do one. Back up your installed apps and data by doing a backup with Titanium Backup. Then you can restore them after the reset.
Q&A for CyanogenMod 11.0 for Galaxy S4 LTE-A (GT-I9506)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
rtc clock not working properly
I cant change rtc clock time, I tried -w and -systohc, but nothing
I have 20141013 installed
---------- Post added at 05:58 PM ---------- Previous post was at 04:58 PM ----------
Dsp manager also not working. When I change sound compression it works, but at next song it sounds normal, like if it wasnt activated.
RTC can't be set directly on all newer Qualcomm devices.
DSP Manager most likely will be changed in CM. Anyway its DSP Manager bug and not ROMs itself. So if you want look through CM JIRA and if there no such bug report. You can report it.
solk2 said:
RTC can't be set directly on all newer Qualcomm devices.
DSP Manager most likely will be changed in CM. Anyway its DSP Manager bug and not ROMs itself. So if you want look through CM JIRA and if there no such bug report. You can report it.
Click to expand...
Click to collapse
Ok, I'll report that. I also noticed that recovery backups dont have rtc time. I did some research on the internet and I found something about newer qualcomm devices have recovery time kept in a file in /data/time. I could check this by reading the file time_log.1.
I did know this coz one day recovery bacckups were changed from 1970 to 2014, but with wrong date, so I think I would have to do a full wipe, format data and system and reinstall the rom, I think this could work. I also read someting in the changelog like rtc showing correct or something like this. Maybe same time is kept coz I dont do wipes while installing a new nightly. I really appreciate your work, I love your rom.
It is set to 2014 in kernel. That what Samsung made in KK opensourced kernel. And dont be surprised if it will be set to 2014 next year. Day, month isn't changed forcefully. So thats why you see such date in recovery. While in normal boot mode time_daemon starts and sets date and time. So wipe don't change anything. These RTC changes related to normal boot mode only. Particularly to time_daemon.
And yes, recoveries like Philz support setting correct date.
Ok, thanks
Is screenshot function working for you?
Sent from my A0001 using XDA Free mobile app
Dialer
First of all, thank you for a great ROM. The only problem I have, is when I am calling someone. The screen just goes black. Is there any trouble with the proximity sensor?
When I take the phone away from my ear the screen is supposed to light up right? Mine doesn't do that...
Thanks!
B
Hi, is screen mirroring working with CM11 nightlies?
Gesendet von meinem GT-I9506 mit Tapatalk
Hi!
I've been having an issue ever since I started using one of the first nightlies of this ROM: After a random time both my WIFI and phone signal icons turn orange and the proces Android OS starts draining my battery together with having no signal at all. Turning off WIFI at that point doesn't seem to work anymore but can be done by putting the phone in airplane modes. When I disable airplane modes and have my WIFI disabled I can browser through my phone network but Android OS still drains the battery. After I reboot everything is back to normal, as long as I leave my WIFI off.
- I've installed various nightlies and have had the same problem on all of them.
- I've done both a firmware update and a factory reset of my wireless router: Linksys E2000.
- I've both enabeld and disabled the Google Location reporting.
The problem still occurs and I can (with a random time) reproduce it. If anyone can help me debug or solve this problem that'd be great!
Assuming you have CWM in use as recovery, enter CWM. Do a format on /system from mounts menu. Then do a factory reset. Install latest nightly from SD and voila. That worked for me a while back.
TonskuDaigle said:
Assuming you have CWM in use as recovery, enter CWM. Do a format on /system from mounts menu. Then do a factory reset. Install latest nightly from SD and voila. That worked for me a while back.
Click to expand...
Click to collapse
I'll give this a try and let you know if it helped. Thanks!
TonskuDaigle said:
Assuming you have CWM in use as recovery, enter CWM. Do a format on /system from mounts menu. Then do a factory reset. Install latest nightly from SD and voila. That worked for me a while back.
Click to expand...
Click to collapse
That did not work. Just got the orange icons again.
I'm open to suggestions.
(It's not exactly a question, but since I have less than 10 posts)
Hi, I've installed the 20141106-NIGHTLY yesterday, everything was working great, I updated to the 20141107-NIGHTLY today and now I don't have notification sounds, vibration and light, most of the audio files I select under Notification Sound are detected as Unknown Ringtone, the battery notification light is not working too, I wiped and restored factor settings through recover and installed the 20141106-NIGHTLY but its still the same, changing the color of the light confirms that the notification light is still working but does not activate wen it should.
Nevermind, I cleaned all my setting and reconfigured, it solved the problem
Hi friends, how can we root this ROM?
Thanks
As other users in the thread about solks2 CM11, I am affected by thebrandom reboot thread. I thought it might help to let you know that those reboot often occur when using waze (while charging the phone in my car). Sorry to post here but I do not have the 10 required posts to reply in the right thread.
---------- Post added at 11:08 PM ---------- Previous post was at 11:02 PM ----------
Hello,
I also have a bug when trying to use google now via bluetooth (stuck on a screen with "initializing" written). I tried several workarounds from the internet but without success. Some suggest that a2dp should be disabled but I didn't find an option to disable it... Anyone managed to make google now work with bluetooth?
I am unable to record videos, anyone else having this issue?
EDIT: I just updated to the latest NIGHTLY, still unable to record videos, in a week or so I'll go on vacation for the holidays and I really need to record some videos, so if someone knows whats wrong please help me, thank you
Revolted5 said:
I am unable to record videos, anyone else having this issue?
EDIT: I just updated to the latest NIGHTLY, still unable to record videos, in a week or so I'll go on vacation for the holidays and I really need to record some videos, so if someone knows whats wrong please help me, thank you
Click to expand...
Click to collapse
I accidentally pushed some wrong commits. Will push fix today.
solk2 said:
I accidentally pushed some wrong commits. Will push fix today.
Click to expand...
Click to collapse
Thank you, you're a life saver
EDIT: Back from work and what do I get? An amazing update, I'm finally able to record videos, thank you very much solk2.
Hi XDA,
As there ar eno recent thread about 'no deep sleep' (aka on CM13/13.1) I'm opening one here inh ope someone can help me troubleshoot what's wrong...
I've had my OPO for 1.5 yr now, and overall it's doing great. Except since CM13.0, I've been having troubles with deep sleep and therefore my battery time hardly make it through the day.
It all began after the April upgrade, when I decided to encrypt my phone. I did a clean full wipe and installed the zip from TWRP recovery, then proceeded to encrypt the phone... Turns out the boot.img patched by SuperSU is incompatible with the encryption process so I reverted the boot.img ti the original and encrypted my phone, then flashed SuperSU back. Since then, the phone would never enter deep sleep mode, except when data connexion and wifi are disabled.
I've since flashed the latest build (ZNH2KAS1KN) in hope that would solve the problem. The flash was the cleanest I ever took (wipe data, system, dalvik, cache ; reboot to recovery, flash full zip, boot to system and restore all app through the 'play store restore' function, reboot to bootloader, flash TWRP with AtAm fix for CM13 encryption support). Yet, my battery keeps drainign blazing fast and I have no deep sleep at all even with the phone sitting indle on a table for hours. See screenshots.
The only strange thing I see are those 'fd440000.qrypto' kernel wakelocks. Any ideas ? I'm assuming it has something to do with the phone being encrypted, but why would deep sleep be achievable when the phone has no data/wifi ?? It's really puzzling and I can't figure out what to do. I had exactly the same problem on the previous 13.0 release (including the qcrypto wakelock).
edit: the only slight deep sleep period is because my SIM card was not detected for a short period of time (probably bad contacts, I took it out, wiped it a bit and everything was back in order)
Any help appreciated, thanks!
Strange. I haven't had much battery drain issues on Sultan's build. Are you using the official cm13 builds or unofficial builds?
Sent from my A0001 using Tapatalk
CoinCoin88 said:
Hi XDA,
As there ar eno recent thread about 'no deep sleep' (aka on CM13/13.1) I'm opening one here inh ope someone can help me troubleshoot what's wrong...
I've had my OPO for 1.5 yr now, and overall it's doing great. Except since CM13.0, I've been having troubles with deep sleep and therefore my battery time hardly make it through the day.
It all began after the April upgrade, when I decided to encrypt my phone. I did a clean full wipe and installed the zip from TWRP recovery, then proceeded to encrypt the phone... Turns out the boot.img patched by SuperSU is incompatible with the encryption process so I reverted the boot.img ti the original and encrypted my phone, then flashed SuperSU back. Since then, the phone would never enter deep sleep mode, except when data connexion and wifi are disabled.
I've since flashed the latest build (ZNH2KAS1KN) in hope that would solve the problem. The flash was the cleanest I ever took (wipe data, system, dalvik, cache ; reboot to recovery, flash full zip, boot to system and restore all app through the 'play store restore' function, reboot to bootloader, flash TWRP with AtAm fix for CM13 encryption support). Yet, my battery keeps drainign blazing fast and I have no deep sleep at all even with the phone sitting indle on a table for hours. See screenshots.
The only strange thing I see are those 'fd440000.qrypto' kernel wakelocks. Any ideas ? I'm assuming it has something to do with the phone being encrypted, but why would deep sleep be achievable when the phone has no data/wifi ?? It's really puzzling and I can't figure out what to do. I had exactly the same problem on the previous 13.0 release (including the qcrypto wakelock).
edit: the only slight deep sleep period is because my SIM card was not detected for a short period of time (probably bad contacts, I took it out, wiped it a bit and everything was back in order)
Any help appreciated, thanks!
Click to expand...
Click to collapse
looks like you are having weak or no signal. this is likely to cause this issue!
Bac0nator said:
Strange. I haven't had much battery drain issues on Sultan's build. Are you using the official cm13 builds or unofficial builds?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Only the official builds for CM13/13.1, and with the cleanest install as possible... Never tried Sultan's build, is that a kernel, a full rom...?
hellcat50 said:
looks like you are having weak or no signal. this is likely to cause this issue!
Click to expand...
Click to collapse
Definitely not the cause. This happens every day, everywhere, independently of signal strength (i.e. color of bar in graph). I've confirmed with a friend of mine who also encrypted his phone a while ago and he also never goes to deep sleep.
CoinCoin88 said:
Only the official builds for CM13/13.1, and with the cleanest install as possible... Never tried Sultan's build, is that a kernel, a full rom...?
Definitely not the cause. This happens every day, everywhere, independently of signal strength (i.e. color of bar in graph). I've confirmed with a friend of mine who also encrypted his phone a while ago and he also never goes to deep sleep.
Click to expand...
Click to collapse
sultan's rom is cm13 with caf kernel. it is known to be very battery friendly.
Here is the link: http://forum.xda-developers.com/one...m-kernel-unofficial-cyanogenmod-13-0-t3242700
and here I was hoping not to have to full wipe/reflash/restore again.... I've also posted on CM jira in hope of a comment on whether there is a known bug on ecnrypted devices or not. If nothig comes from there I'll try sultan's rom...
Sultan's builds are optimized for battery on the one plus one. They tend to be better than official cm13 builds, most of the time.
Another option is downloading an app called nap time on the play store, which forces your phone to go into deep sleep the moment the screen shuts off.
CoinCoin88 said:
and here I was hoping not to have to full wipe/reflash/restore again.... I've also posted on CM jira in hope of a comment on whether there is a known bug on ecnrypted devices or not. If nothig comes from there I'll try sultan's rom...
Click to expand...
Click to collapse
Steve included some kernel commits recently that address the crypto wakelock. They should be fixed on current nightlies.
I know it fixes it as I had that fd000.crypto kernel wakelock until very recently and I'm encrypted.
I have the same issue on Sultan's Rom. First 20 days battery life was awesome and now all the time phone is awake. I am reflashing sulatn build again
Thanks for this info, this is going in the same direction I observed and somewhat reassuring. Are you talking about CM nightlies then ?
edit: that was inteded for @tiny4579
Sent from my A0001 using XDA Free mobile app
tiny4579 said:
Steve included some kernel commits recently that address the crypto wakelock. They should be fixed on current nightlies.
I know it fixes it as I had that fd000.crypto kernel wakelock until very recently and I'm encrypted.
Click to expand...
Click to collapse
By any chance, would you happen to have SuoerSU as root binary/manager? I recall it patches boot.img which prevented encryption from being run in the first place (to encrypt, I had to reflash the stock boot.img, encrypt, then reflash SuoerSU). I'm wondering if the altered boot.img couldn't be part of the problem.
Sent from my A0001 using XDA Free mobile app
Some heads up: there was indeed a wakelock issue that has been fixed by a commit on the 4th of June.
See associated bug on JIRA: https://jira.cyanogenmod.org/browse/BACON-4987 (and appreciate how it's easier to blame the user than to try to replicate a bug). Hopefully we'll have a 'future OTA' before the end of the year...
I still have this wakelocks issues right now...