Please help. Today I defy update and now Will not start (kernel 2.3.6). First try to update it nandroid and did not work, restarting the phone and no one appeared caught "err bootloader" with the RDS Lite able to update but now only shows the letter M and Then err bootloader, I can not enter the recovery by pressing on and vol-
Not to do, and try putting other sbf and nothing (Not Even the screen does turn on).
Please help, I'm desperate!!
Can you successfully flash the 2.3.6 via RSDlite?
What happens after you successfully flash and restart the phone? Stuck in a red, static M? Or is the M moving and waving forever?
EDIT
sorry, bit sleepy, I didn't understand fully your post
are you sure you flashed the right version for your phone? I had a boot loader error as well after flashing, but then I found the right version
which error does it give to you?
I flahed: DEFYPLUS_U3_4.5.1-134_DFP-132_Retail_en_DE.sbf, when the phone restarted displays moving the letter M and then ERROR CODE A5, 70, 39, 00, 27 (in the bootloader)
I have a Defy+ so I can't be 100% sure how to help you.. but I got the very same error message when I tried to flash a sbf, I just can't remember which one because that night I flashed a lot of them before finally making it work
Try to flash another one and see if you get the same error message
Sorry, can't tell you more than that for now T__T
When I flashed others sbf (every version) the display dont turn on....... :S
yesdalo said:
When I flashed others sbf (every version) the display dont turn on....... :S
Click to expand...
Click to collapse
http://www.multiupload.com/MA69WFQQG0
it work fine
I'll try at night
Works with DEFYPLUS_U3_4.5.1-134_DFP-132_BLUR_SIGN_SIGNED_USADEFYEMARAB1B8TFDE004.0R_PDS03C_USAJRDNGIBRO2DE_P019_A021_M002_HWp3_WIG148151_Service1FF.sbf!!!!!!!!!!
Yuju
Related
Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)
Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.
I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english
Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.
Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!
I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?
Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...
bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help
MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help
Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom
try to flash sbf use rsd
If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.
if sbf doesnt work u better send it to warranty
Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)
If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.
white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope
Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD,the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.
Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy
Hi to everyone,
I got a defy+ that had DEFYPLUS_U3_4.5.1-134_DFP-1321_CN
them i flashed cm9 quarx CM9-NIGHTLY-20120420-Defy+.zip
after some testing I wanted to come back to original sbf
so I booted my phone pressing power and volume +
them flashed again the DEFYPLUS_U3_4.5.1-134_DFP-1321_CN
got stuck on moto logo
tried recovery mode wipe everything
them flash again with plenty other fsb without sucess
last I tried was DFPRC_U_4.5.3-109_DPP-14-17
now my phone dont turn on the screen anymore
but rsdlite still reconize it and even can flash sbf
the screen will eventually turn on and show the sw update message when I start the flash
after it says pass at the end it wont do anything not even show the moto logo
them I tried http://forum.xda-developers.com/showthread.php?t=1552152
still same thing
tried flahsing the Defy-BL6Downgrade-CDT.sbf
them DEFYPLUS_U3_4.5.1-134_DFP-1321_CN
tried flahsing the Defy-BL6Downgrade-CDT.sbf
them DFPRC_U_4.5.3-109_DPP-14-17
tried flahsing the Defy-BL6Downgrade-CDT.sbf
them DFL_U3_4.5.2_51-50_SIGNED
thats the retail from my country
dsont know what to do anymore please help Iam desperate
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Have you got a solution?
johannesleung said:
Hi to everyone,
I got a defy+ that had DEFYPLUS_U3_4.5.1-134_DFP-1321_CN
them i flashed cm9 quarx CM9-NIGHTLY-20120420-Defy+.zip
after some testing I wanted to come back to original sbf
so I booted my phone pressing power and volume +
them flashed again the DEFYPLUS_U3_4.5.1-134_DFP-1321_CN
got stuck on moto logo
tried recovery mode wipe everything
them flash again with plenty other fsb without sucess
last I tried was DFPRC_U_4.5.3-109_DPP-14-17
now my phone dont turn on the screen anymore
but rsdlite still reconize it and even can flash sbf
the screen will eventually turn on and show the sw update message when I start the flash
after it says pass at the end it wont do anything not even show the moto logo
them I tried http://forum.xda-developers.com/showthread.php?t=1552152
still same thing
tried flahsing the Defy-BL6Downgrade-CDT.sbf
them DEFYPLUS_U3_4.5.1-134_DFP-1321_CN
tried flahsing the Defy-BL6Downgrade-CDT.sbf
them DFPRC_U_4.5.3-109_DPP-14-17
tried flahsing the Defy-BL6Downgrade-CDT.sbf
them DFL_U3_4.5.2_51-50_SIGNED
thats the retail from my country
dsont know what to do anymore please help Iam desperate
Click to expand...
Click to collapse
I'm stuck in a similar problem.
I mistakenly flashed DFPRC_U_4.5.3-109_DPP-14-17 (downloaded from here). Now my defy with Green Lens simply shows a black screen. Is there any way to fix this?
I think your BL version is 7, but I recommented first you flash DFP-139 from this: http://sbf.droid-developers.org/umts_jordanplus/list.php .It's BL6 version if with this version still black screen. You'll need to flash BL7 231 from this thread, first you'll need flash 231 when ROOTED 231.
!!!TRY FIRST WITH BL6!!!
I have Motorola Defy MB252
When i bought the phone i installed MiUI to it. I have been since always upgraded MiUI using its updater. Yesterday I was drooling after the Android 4 for the Defy and decided I would try it out. I had some rom loader with 3 buttons installed on the Android. I pressed the one with boot rom manager button or something like that – I cant precisely recall what the buttons said or what was the name of the program. After this the phone booted and got stuck to the Motorola logo. I then tried to recover the phone to working state by flashing different SBF files from umts_jordan/list.php. None of them work – I am currently stuck in situation where the phone wont even show the Motorola logo. The phone automatically goes to the SBF flash state. Im flashing from Windows using the RSD like v5.5. Latest SBF I flashed was 3.4.2_145_finland\JRDNEM_U3_3.4.2_145-003_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA039.0R_UCAJRDNFRYORTCOREEU_P009_A006_HWp3_Service1FF.sbf
I only get blank screen with white front indicator led shining. I can get to flash state and it will only then print its programming it. The RSD lite says flashing was OK.
I did not keep good track what SBF files I have tried to flash.
I’m desperate – do you have any ideas what I should do?
[EDIT]
I flashed Defy-BL6Downgrade.sbf. Now i can get to Bootloader 09.10 (i see the normal bootloader when booting the phone but still no android).
FIXED EVERYTHING: Follow instrucsions in thread #1152377 post #8
Hello there,
I apologize if the thread seem redundant, but I've already tried I found the forum about similar issues to no avail.
So I bought a bricked Defy on eBay for a couple of bucks and I'm trying to revive it. The seller said he bricked it after a flash that apparently when wrong.
The phone does not power on at all and doesn't even react when the power button is pressed. The white LED turn when I plug the phone to a computer. It does not turn on when plugged to a wall charger.
By using the "MacGyver" method, I have managed to make the phone show up in RSDLite. I have tried to flash multiple SBF images with different CG versions. Each time, the phone wakes up and shows "SW UPDATE IN PROGRESS" in blocky font but dies again once the flashing process end. RSDLite simply shows PASSED. Also every informations listed by RSDLite in the "Devices Properties" is shown as N/A except for the bootloader version and the last 4 lines.
Another issue is that I'm not even sure whether it's a DEFY or a DEFY+. The seller listed it as a DEFY+, however the battery that came with it is a 1540mAh and the lens seem to be green. I've tried to flash a DEFY+ before noticing this, so hopefully it didn't screw up the phone even more.
So, any idea? I would appreciate any help provided. Thanks!
The most important thing is to use the latest version of RSD and drivers.
I have a Defy plus and the same thing happened to me before (black screen even no bootlooder) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
In my satiation, the phone got recognized in the RSD and remained black screen till I pressed start then it finally showed SU UPDATE.
The defy plus has a grey colored power buttons and screws but the defy is totally black
The most important thing is to use the latest version of RSD and drivers
And please tell me if it worked.
Thanks for the reply. Now I know I have a DEFY!
Unfortunately, getting the phone recognised isn't the problem. I can flash SBF and everytime the process seem to go without any error (RSDLite just show passed once it's done). But the phone is still completely bricked. I also tried the "TI Flash erase" option, to no avail.
I'll just try again a bit, then I guess I'll list it back on eBay.
smiloo said:
Unfortunately, getting the phone recognised isn't the problem. I can flash SBF and everytime the process seem to go without any error (RSDLite just show passed once it's done). But the phone is still completely bricked.
Click to expand...
Click to collapse
Did you read Zephyrot's All-in-one thread? I guess you haven't...
Zephyrot said:
CG Versions
With that explained let’s get to business with versions:
CG Version 2: SBF 2.21 / 2.34 / Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1 (Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread, 2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests Gingerbreads, 2.3.6, (Red lens Defy/Defy+) )
If you try to flash a lower ID version than the one already on your phone, you will just get a Black screen after booting or a screen telling you to flash an official rom.
So, with this in mind, you can now hop between Android versions without screwing up your phone.
If you have an Éclair Defy and would like to keep the ability to downgrade to it, you should ONLY install FIXED SBFs of the Android Version you want to install, and then use the corresponding Nandroid Backup for that Fixed SBF.
Click to expand...
Click to collapse
If you have flashed an SBF with a higher CG39 version than your original, there is a good chance you now own not a Defy, but a Defy+, which is not a huge issue, unless you need to get back your stock ROM for warranty purposes or if your phone has a green lense...
Well thanks for the reply, but my problem isn't that the phone fails to boot, but does simply not turn on at all. It's literally dead as a brick. I've already tried to flash pretty much every sbf under the sun (Including DEFY+ once) and the phone never turned on once (Not even the Moto logo or a bootloader error screen).
The only last thing I see might be a defective battery.
Yeah could be a battery. Get a cheap one ebay job and try a sbf then if it loads then great u can allways put cm7 or cm9 on it
defy cm7
Change your battery or charge with external charger (universal charger)
Or this may work
http://forum.xda-developers.com/showthread.php?t=
Sent from my MB525 using xda premium
hello guys. i 'm also new here, but have exactly same problem with my defy. my battery is full charged when i try to flash.
so i still wait for any good idea. thanks
smiloo said:
Hello there,
I apologize if the thread seem redundant, but I've already tried I found the forum about similar issues to no avail.
So I bought a bricked Defy on eBay for a couple of bucks and I'm trying to revive it. The seller said he bricked it after a flash that apparently when wrong.
The phone does not power on at all and doesn't even react when the power button is pressed. The white LED turn when I plug the phone to a computer. It does not turn on when plugged to a wall charger.
By using the "MacGyver" method, I have managed to make the phone show up in RSDLite. I have tried to flash multiple SBF images with different CG versions. Each time, the phone wakes up and shows "SW UPDATE IN PROGRESS" in blocky font but dies again once the flashing process end. RSDLite simply shows PASSED. Also every informations listed by RSDLite in the "Devices Properties" is shown as N/A except for the bootloader version and the last 4 lines.
Another issue is that I'm not even sure whether it's a DEFY or a DEFY+. The seller listed it as a DEFY+, however the battery that came with it is a 1540mAh and the lens seem to be green. I've tried to flash a DEFY+ before noticing this, so hopefully it didn't screw up the phone even more.
So, any idea? I would appreciate any help provided. Thanks!
Click to expand...
Click to collapse
adiid said:
hello guys. i 'm also new here, but have exactly same problem with my defy. my battery is full charged when i try to flash.
so i still wait for any good idea. thanks
Click to expand...
Click to collapse
Hi
Try these SBF
1. http://www.4shared.com/rar/xzT3dMXv/JORDN_U3_972151.html
This SBf is For China Defy. IF ur Phone Power up Dont use camera(Burn).
Instal custom Rom ( CM7 CM9 ......)
2.http://forum.xda-developers.com/showthread.php?t=1486731
If 2 way not Worked Sadly Maybe u are in Bootloader 7. Be careFull.
Ur Phone power up with DFP231 Bl7. But For Green lens no Battery and No Camera!
Android master said:
I have a Defy plus and the same thing happened to me before (black screen even no bootlooder) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
In my satiation, the phone got recognized in the RSD and remained black screen till I pressed start then it finally showed SU UPDATE.
The defy plus has a grey colored power buttons and screws but the defy is totally black
The most important thing is to use the latest version of RSD and drivers
And please tell me if it worked.
Click to expand...
Click to collapse
I am with exactly the same problem. No bootloader, and SU UPDATE showing while the process occurs, and PASS at the end. But once finished, can't turn on the phone.
I have a Defy+ ( and other Defy who helps charging battery).
Do you think I need to try MacGyver method?
only white led black screen on my defy after flashing with rsdlite
duduzerah said:
I am with exactly the same problem. No bootloader, and SU UPDATE showing while the process occurs, and PASS at the end. But once finished, can't turn on the phone.
I have a Defy+ ( and other Defy who helps charging battery).
Do you think I need to try MacGyver method?
Click to expand...
Click to collapse
can anyone tell me what the MacGyver method is and how it work thnx
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
andr0idfreak said:
Which stock ROM were you on? If you flash the same ROM again, you should not have this problem. This happens mostly if you flash a ROM with lower BL than the current one on your phone.
Click to expand...
Click to collapse
The first SBF i put, there rom_froyo.sbf (original from motorola i think)
before i try to upgrade to CM10-20120904 i have kernel 2.3.4 and i think that the same "rom_froyo.sbf", because i made only one time Flash with RDSLite...
from first and unique flash with RDSLite, only i made update from recovery mode - install zip from sd
only put cm7, cm9 and cm10, then the Gapps... and the last time when upgrade to cm10 i made, install cm10.zip, install kernel 2.3.4, and install gapps...
Any idea about the firmware version?
andr0idfreak said:
Any idea about the firmware version of rom_froyo.sbf ?
Click to expand...
Click to collapse
i have no idea..
i think that is 2.2 from motorola
i get it from HTCMania
w w w. htcmania.com/showthread.php?t=219893
but now links are not valid...
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
andr0idfreak said:
As you flashed ME722BL6.sbf, you are now on BL6 and I assume that's a Defy+ ROM, so no downgrade to Froyo. Try flashing the ME722BL6.sbf file again and don't flash froyo ROM on top of it. If it gets stuck on M logo, go to recovery and do a factory reset.
If you have a greenlens defy, you can no longer use the camera.
Click to expand...
Click to collapse
I have normal defy, with red lense (bayer)
the principal problem now is that can not made nothing... only it put in white led when i connected to usb...(no combination (power+vol+ or power vpl-) made nothing)
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
andr0idfreak said:
Try this: Pull out battery. Keep volume + pressed. Insert battery and then press power button. It should now enter bootloader mode. Connect it now to PC and then flash SBF with RSD.
Click to expand...
Click to collapse
I'm trying to charge the battery via USB cut,
red wire to positive and black to negative,
I'll leave loading an hour or more, and try again.
what "sbf" do you recommend that put in defy? BL6 or BL7 ...
Could you put the recommended "sbf" links?
thanks.
Charging on unregulated USB for an hour can kill your battery
Sent from my MB526
Moved to Q&A. Please post all questions there.
Sent from my HTC Glacier using xda premium
did you fix it?
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
ela1103 said:
Guys please help me
iam in BL7.When i flash the bl7 sbf .First i get bootloader code courrpt message .then i remove the battery it show the message bootloader err:A5,69,4E,00,41
Rsd lite 4.9,5.6,5.7 did not detect my defy .iam format my laptop two times .it detect my defy .pls guys help me from the problem
Click to expand...
Click to collapse
What defy you have: red, green or plus? You cant install lower rom than 188. If you have plus - you'll have all things working, red - battery can make work with batt fixes, green - camera will never work on BL7, only on CM10,CM9.1 or other roms with custom kernel. You're stuck on BL7 so try flash 231 sbf. Read this post, you'll find more info: http://forum.xda-developers.com/showpost.php?p=12419400&postcount=3
Plz Help
gark81 said:
Hello mates,
this morning I've taken to update the defy of CM10-20120810 to 20120904 CM10-last (had 2.3.4 kernel "kernel-gb-234-451-134-signed")
but after upgrading, has given me the battery fault that I was 100%
I tried several times to put him the Fix battery, but nothing at all ...
so I've taken to "Flashing" the Defy, first I tested with
ME722BL6.sbf
later with
rom_froyo.sbf
and when I RDSLite says "the phone is beein Rebbot" or something .. I restart, get the Motorola logo disappears .. and goes blank ..
and puts me in RDSLite "Finished" and "PASS"
Defy but does nothing ... and when I press the power button is switched off, give it back, turn again as "Bootloader" with the following error
Err: A5, 70,39,00,27
I've also tried to say next. "sbf"
bl7-2.3fix.sbf
526krfix.sbf
Vodafone and the original:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R _PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Servic e1FF.sbf
all with the same result ...
can help me???
I'm already not to do ... took all day ..
Click to expand...
Click to collapse
Hi Frnd,
How you solve this problem, I have the same problem...
Plz, help me.... in Advnc Thanx......