[Q] Rooting Help - Xoom General

Hi,
i Need Help Please!!
I apologize in advance for being such a NOOB, first device i have ever tried to root and i am stuck....
Also, sorry but I can't post in the root thread because <10 posts...
So!
I wanted to root my Xoom (MZ604)
i unlocked it and everything went fine:
"
adb reboot bootloader
fastboot oem unlock
adb reboot bootloader
"
then following (http://forum.xda-developers.com/show....php?t=1010568) to root the xoom.
i did:
"
fastboot flash boot boot.img
fastboot reboot
"
and now i am stuck at the dual core technology screen.....
Help Please!!

villapanama said:
Hi,
i Need Help Please!!
I apologize in advance for being such a NOOB, first device i have ever tried to root and i am stuck....
Also, sorry but I can't post in the root thread because <10 posts...
So!
I wanted to root my Xoom (MZ604)
i unlocked it and everything went fine:
"
adb reboot bootloader
fastboot oem unlock
adb reboot bootloader
"
then following (http://forum.xda-developers.com/show....php?t=1010568) to root the xoom.
i did:
"
fastboot flash boot boot.img
fastboot reboot
"
and now i am stuck at the dual core technology screen.....
Help Please!!
Click to expand...
Click to collapse
If you're stuck at dual core logo, hold volume up and power to reboot, then once you see the dual core logo, count to 3 then press volume down. If done right you'll see android recovery in the top corner, if not you may see "starting fastboot protocol," press volume down again till you see "android recovery" then press volume up to load recovery and restore your device.

okantomi said:
If you're stuck at dual core logo, hold volume up and power to reboot, then once you see the dual core logo, count to 3 then press volume down. If done right you'll see android recovery in the top corner, if not you may see "starting fastboot protocol," press volume down again till you see "android recovery" then press volume up to load recovery and restore your device.
Click to expand...
Click to collapse
Ok i tried it.....
after I hit volume up to select "android Recovery"
it enters Android recovery then i get "Reading ODM 1"
then it goes to a screen with the android dude with a triangle with exclamation mark....
and it stays there

FIXED it!!!
i actually downloaded Stock Images and ran
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase cache
fastboot reboot
its good now!
Thanks for your Help!

Related

How-to Fastboot on S7 Tablet

Alright, fastboot is useful for development but I am posting it here because it is a general topic and won't be discussing developing.
fastboot is useful because you can test kernel builds without having to worry about it not booting, if it doesn't you just remove battery and it boots normal.
While device is off, hold both volume keys(up and down) and power, keep it held until the device goes black but lit screen. This is the bootloader screen and lets you run fastboot commands.
Another way is to have a rooted S7 and in terminal do the following:
su
reboot recovery (you could do adb reboot recovery from your pc without using terminal on device)
I think razor knows because he mentioned this elsewhere, but in case anyone sees this and tries reboot recovery...
Fastboot is actually
adb reboot bootloader
reboot recovery enters recovery and results in a factory reset
Please tell me more about
xaueious said:
I think razor knows because he mentioned this elsewhere, but in case anyone sees this and tries reboot recovery...
Fastboot is actually
adb reboot bootloader
reboot recovery enters recovery and results in a factory reset
Click to expand...
Click to collapse
Hi brother, i have one s7 here model s7-202u and i try to flash and cant boot...
Always appear on screen about fastboot mode...
And i cant boot this tablet.

Can't boot or flash to TWRP or CMW

Today I tried booting up to recovery (power+vol down), after choosing Recovery Mode from the menu and hitting Power button, it gets to a screen with the green Android guy with a red triangle and just stays there.
So I rebooted the phone. Launch Nexus Root Toolkit, I tried to install CWM or TWRP, neither works. It gets to the same recovery mode and gets stuck there, only this time, it gets stuck on the Google logo instead of the Android guy with red triangle. I even try to flash stock recovery, and it also doesn't work.
Why can't I get into CWM or TWRP nor can I flash them?
Thanks for any help.
bebopblues said:
Today I tried booting up to recovery (power+vol down), after choosing Recovery Mode from the menu and hitting Power button, it gets to a screen with the green Android guy with a red triangle and just stays there.
So I rebooted the phone. Launch Nexus Root Toolkit, I tried to install CWM or TWRP, neither works. It gets to the same recovery mode and gets stuck there, only this time, it gets stuck on the Google logo instead of the Android guy with red triangle. I even try to flash stock recovery, and it also doesn't work.
Why can't I get into CWM or TWRP nor can I flash them?
Thanks for any help.
Click to expand...
Click to collapse
Be sure u are bootloader unlocked.
Android guy is normal... Is a safety step before entering on stock recovery, to pass that: hold power and hit once volume +
Probably u cant flash images cuz fastboot isnt working(old fastboot.exe file), wrong recovery file,...
sent from my NEXUS 4 tasting a revamped cooking recipe of Jellybeans (stock 4.3).
C4SCA said:
Be sure u are bootloader unlocked.
Android guy is normal... Is a safety step before entering on stock recovery, to pass that: hold power and hit once volume +
Probably u cant flash images cuz fastboot isnt working(old fastboot.exe file), wrong recovery file,...
sent from my NEXUS 4 tasting a revamped cooking recipe of Jellybeans (stock 4.3).
Click to expand...
Click to collapse
Bootloader was unlocked. I launched the CMD Prompt from Nexus Root Toolkit and ran the fastboot command to manually flash the downloaded CWM and it worked.
Code:
adb reboot bootloader
fastboot flash recovery recovery-clockwork-x.x.x.x-mako.img
So maybe something's odd about the simple one-click utilities in Nexus Root Toolkit that is not working.
Thanks for the help nonetheless. :good:
bebopblues said:
Bootloader was unlocked. I launched the CMD Prompt from Nexus Root Toolkit and ran the fastboot command to manually flash the downloaded CWM and it worked.
Code:
adb reboot bootloader
fastboot flash recovery recovery-clockwork-x.x.x.x-mako.img
So maybe something's odd about the simple one-click utilities in Nexus Root Toolkit that is not working.
Thanks for the help nonetheless. :good:
Click to expand...
Click to collapse
well ui never used tollkits... i like to know what im doing, and IMO doing it urself is better wich turned out to be true in ur case
im glad u got it working

Trouble flashing 5.0.0! Help needed!!!

Need help here!
My Nexus 10 was with stock 4.4.4, rooted with TWRP. I decided to flash the factory image files by removing the -w in flash-all.sh. However it ended up with being stuck with the rotating balls. After about 45 minutes, I decided to go to the fastboot mode (pwr+both volumes), then select recovery (I planned to do factory reset and clear cache). After trying to reboot into recovery mode (pwr + one volume button), it now shows an open bootloader with following message below the bootloader (the bootloader seems still unlocked):
Dowloading...
Do not turn off target!!
What does it mean? What is it exactly downloading? And what should I do? Should I lock the bootloader? Also it does not respond now if I push the volume buttons. It's not recognized on my Mac with the with the following command:
fastboot devices
I also notice the following line:
Reboot Mode Flag: NONE
Now I just booted into recovery, but it shows the bootloader with the exclamation mark! After a few minutes, it automatically switched to the never-ending rotating balls. What can I do?
When you get the Downloading...message you're in the Recovery screen. Don't worry about the message. Press vol up and power to get into the recovery menu - there you can wipe cache and system. As you're in recovery, Fastboot devices will not recognise your tablet, only adb commands.
If I was you and this didn't work, I'd just reboot into fastboot and flash the image files manually. You'll lose root, data and twrp but these can easily be gotten back through fastboot.
Hi,
In case you want help to flash Stock Firmware files. Check the Manta Help Thread .
http://forum.xda-developers.com/showthread.php?t=2670400
~Lord

[SOLVED] Xiaomi Redmi 4 Prime cannot boot to TWRP

I have a Xiaomi Redmi 4 Prime/Pro and my problem is that I cannot boot into recovery using the Power+Volume Up method. When I do so, my phone gets stuck at the Mi boot logo. However, I can boot into recovery when I hold Power+Volume Down (I enter fastboot mode), then I connect my phone to my PC and I use the commands:
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
I don't know if it's normal that my phone restarts automatically and boots into recovery when I hit enter with the last command.
I want to be able to get into recovery using the Power+Volume Up technique. Also, I heard that if I hold the Volume Up key when I reboot from fastboot will open a window with an option to disable stock recovery replacement. This also doesn't work and gets me to the stuck screen with the Mi boot logo.
Is there anything I can do to open TWRP using the Power+Volume Up method?
DJsushi123 said:
I have a Xiaomi Redmi 4 Prime/Pro and my problem is that I cannot boot into recovery using the Power+Volume Up method.
Is there anything I can do to open TWRP using the Power+Volume Up method?
Click to expand...
Click to collapse
Switch off the phone and wait for 10sec. After that hold together Volume Up + Volume Down + Power and wait (i guess 5-15sec) until you see recovery.
DJsushi123 said:
I have a Xiaomi Redmi 4 Prime/Pro and my problem is that I cannot boot into recovery using the Power+Volume Up method. When I do so, my phone gets stuck at the Mi boot logo. However, I can boot into recovery when I hold Power+Volume Down (I enter fastboot mode), then I connect my phone to my PC and I use the commands:
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
I don't know if it's normal that my phone restarts automatically and boots into recovery when I hit enter with the last command.
I want to be able to get into recovery using the Power+Volume Up technique. Also, I heard that if I hold the Volume Up key when I reboot from fastboot will open a window with an option to disable stock recovery replacement. This also doesn't work and gets me to the stuck screen with the Mi boot logo.
Is there anything I can do to open TWRP using the Power+Volume Up method?
Click to expand...
Click to collapse
Fastboot reboot recovery
Modest Mind said:
Switch off the phone and wait for 10sec. After that hold together Volume Up + Volume Down + Power and wait (i guess 5-15sec) until you see recovery.
Click to expand...
Click to collapse
Thank you so much! It actually works! I don't know how, because usually it worked with the Power+Volume Up method.. Anyway, thanks!
SAFI_AFRIDI said:
Fastboot reboot recovery
Click to expand...
Click to collapse
Hello,
thanks for your response. I don't know if you actually read my post, but my phone reboots after the command
Code:
fastboot boot twrp.img
and then it directly boots into TWRP. So getting into TWRP isn't that much of a problem here. I wanted to get into recovery without a PC and without using any of these commands.
Also, please try to describe the procedure more precisely next time because typing out just one command that isn't even surrounded in
Code:
quotes...
Thank you.
DJsushi123 said:
Hello,
thanks for your response. I don't know if you actually read my post, but my phone reboots after the command
Code:
fastboot boot twrp.img
and then it directly boots into TWRP. So getting into TWRP isn't that much of a problem here. I wanted to get into recovery without a PC and without using any of these commands.
Also, please try to describe the procedure more precisely next time because typing out just one command that isn't even surrounded in
Code:
quotes...
Thank you.[/QUOTE]
Ok then just go to settings and then system update and then click on the menu and reboot in recovery
Click to expand...
Click to collapse
SAFI_AFRIDI said:
Ok then just go to settings and then system update and then click on the menu and reboot in recovery
Click to expand...
Click to collapse
Hello,
thank you for your answer. One thing I forgot to mention is that I use a custom OS too (MoKee ROM) with Android 6.0.1. Although this has an option for 'Advanced reboot' where you can reboot to recovery, this option always got me to the Mi boot logo and stays stuck there.
Also, I already fixed this problem by holding Power+Volume Up+Volume Down at the same time.
Best regards,
DJsushi
Just flash this fix markw_fix_twrp_reboot.zip
DJsushi123 said:
I have a Xiaomi Redmi 4 Prime/Pro and my problem is that I cannot boot into recovery using the Power+Volume Up method. When I do so, my phone gets stuck at the Mi boot logo. However, I can boot into recovery when I hold Power+Volume Down (I enter fastboot mode), then I connect my phone to my PC and I use the commands:
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
I don't know if it's normal that my phone restarts automatically and boots into recovery when I hit enter with the last command.
I want to be able to get into recovery using the Power+Volume Up technique. Also, I heard that if I hold the Volume Up key when I reboot from fastboot will open a window with an option to disable stock recovery replacement. This also doesn't work and gets me to the stuck screen with the Mi boot logo.
Is there anything I can do to open TWRP using the Power+Volume Up method?
Click to expand...
Click to collapse
Just flash markw_fix_twrp_reboot.zip it will fix the problem
link: https://drive.google.com/file/d/0B8e8UmTAapESVU1xdjFfeS11cEk/view
****!! Phone not booting after flash no buttons working seems, completely dead..!!!
Aseer Al Faisal said:
Just flash markw_fix_twrp_reboot.zip it will fix the problem
link: https://drive.google.com/file/d/0B8e8UmTAapESVU1xdjFfeS11cEk/view
Click to expand...
Click to collapse
****!! Phone not booting after flash no buttons working seems, completely dead..!!!
Any to remove pattern lock widout loosing data.... Non rooted... No google or mi account details... Read q&a thread for details.. help

[help]us996 can't boot into twrp recovery

hello
i have a lg v20 us996 phone and i unlock the bootloader via lg's official unlock tool. then i boot into bootloader and use fastboot tool flash twrp-3.0.2-1-us996 recovery, everything goes well.
i reboot the phone use fastboot command
Code:
fastboot reboot
phone seemed to get a factory wipe and i re-enable the usb debug again in the develope mode
then reboot to recovery use adb command
Code:
adb reboot recovery
but after reboot, i can only get lg's recovery. I've tried to re-flash twrp use fastboot,but every time i reboot to recovery i could only get lg recovery only, there is on way to reboot to twrp.
anyone can help me to get boot into twrp, thank you
Dont reboot the device after flashing recovery in ADB. Boot straight to recovery.
Can a mod please move this thread to the proper location?
This thread should be moved to the q&a section
12MaNy said:
Dont reboot the device after flashing recovery in ADB. Boot straight to recovery.
Can a mod please move this thread to the proper location?
Click to expand...
Click to collapse
but can u tell me how to reboot straight to recovery while finish flash recovery in fastboot mode, i can't find way do this.
I have unlock the bootloader so each time i boot up the phone, first there is a lg logo displaying for about 2 second and then a warning msg will appear on the screen. this warning message will display on the screen for about ten second and then a lg logo appear again then boot the android system. i don't know how to interrupt the normal boot process and get into recovery manual.
when i use adb to reboot to recovery, lg recovery will appear after the warning message screen off. i turnoff the phone and press power+down button together to try to get into recovery manually, but after the lg logo appear the second time, there is no way to start recovery. the phone will boot to android directly.
ok i find the way to get into twrp now by vidoe in youtube.
https://www.youtube.com/watch?v=aN5hd53_V5U
thank you @12MaNy
here is a new problem, each time i start a normal boot, i will lost twrp again. anyone can tell me how to solve this, thank you
mking007cn said:
here is a new problem, each time i start a normal boot, i will lost twrp again. anyone can tell me how to solve this, thank you
Click to expand...
Click to collapse
I had the same trouble. Read this page of responses
mking007cn said:
ok i find the way to get into twrp now by vidoe in youtube.
https://www.youtube.com/watch?v=aN5hd53_V5U
thank you @12MaNy
Click to expand...
Click to collapse
No problem, but I would rather you hit the thanks button.
12MaNy said:
No problem, but I would rather you hit the thanks button.
Click to expand...
Click to collapse
Thanks added
Also having this problem, however when I hold the POWER+VOLUME DOWN buttons to try to boot into recovery after shutdown/battery removal - the system STILL loads.
I get the warning saying the bootloader is unlocked though. After that the phone just starts up as normal, even though I'm holding the buttons
TheCoryGuy said:
Also having this problem, however when I hold the POWER+VOLUME DOWN buttons to try to boot into recovery after shutdown/battery removal - the system STILL loads.
I get the warning saying the bootloader is unlocked though. After that the phone just starts up as normal, even though I'm holding the buttons
Click to expand...
Click to collapse
here is the step i find finally
1. re-boot into fastboot mode
2. flash twrp use fastboot command.
3. power-off the phone
4. power-on with power and volume down button holding
5. while lg log appears, release power button immediately for 1 second and then hold again
6. when recovery selection screen appears, select 'yes' both two times.
now phone boot to twrp recovery.
REMEMBER: WHEN YOU BOOT INTO LG'S SYSTEM AGAIN, YOU WILL LOST TWRP. IF U WANT TO USE TWRP AGAIN, U MUST RE-FLASH TWRP AND REPEAT THE STEPS ABOVE. THIS WILL LOST ALL DATA(PHONE WILL GET FACTORY RECOVERED)!!
I hope this can help you, good luck.
mking007cn said:
here is a new problem, each time i start a normal boot, i will lost twrp again. anyone can tell me how to solve this, thank you
Click to expand...
Click to collapse
You need to delete the file recovery-from-boot.p in /system
Each time you boot, that file gets executed and restores the stock recovery from recoverybak. Alternatively, you can flash TWRP to both recovery and recoverybak.
-- Brian
runningnak3d said:
You need to delete the file recovery-from-boot.p in /system
Each time you boot, that file gets executed and restores the stock recovery from recoverybak. Alternatively, you can flash TWRP to both recovery and recoverybak.
-- Brian
Click to expand...
Click to collapse
i use lineageos now, and this problem has gone.
Thank you.

Categories

Resources