Database Users

Ran EasyRecowvery 1.3b3. Now phone doesn't boot to any recovery. (including stock!)

After attempting to use this tool:
http://forum.xda-developers.com/v20/development/lg-h918-t-mobile-one-click-recowvery-t3491969
It appears that I do not have any recovery installed or it appears I don't have a bootable recovery. Previously I got the custom TWRP recovery to work but the installer went ahead before I was able to wipe data. Now I cannot even boot into stock recovery. even the command "adb reboot recovery" just makes the phone start up normally. Volume down + Power makes the phone start normally as well.
attempting to run the tool again will cause it to deny flashing the custom IMG file as it tells me my recovery is already modified and won't continue unless I turn off verification (highly ill-advised) It refuses to flash TWRP.
At least I have a working phone and not a boot looping brick but is there a way to get stock recovery back just so I can try again? I have been told I need to re-lock my bootloader and hopefully that will restore everything back to the way it was so I can start again.
Any help is greatly appreciated!

stanleyopar2000 said:
After attempting to use this tool:
http://forum.xda-developers.com/v20/development/lg-h918-t-mobile-one-click-recowvery-t3491969
It appears that I do not have any recovery installed or it appears I don't have a bootable recovery. Previously I got the custom TWRP recovery to work but the installer went ahead before I was able to wipe data. Now I cannot even boot into stock recovery. even the command "adb reboot recovery" just makes the phone start up normally. Volume down + Power makes the phone start normally as well.
attempting to run the tool again will cause it to deny flashing the custom IMG file as it tells me my recovery is already modified and won't continue unless I turn off verification (highly ill-advised) It refuses to flash TWRP.
At least I have a working phone and not a boot looping brick but is there a way to get stock recovery back just so I can try again? I have been told I need to re-lock my bootloader and hopefully that will restore everything back to the way it was so I can start again.
Any help is greatly appreciated!
Click to expand...
Click to collapse
Are you pressing volume down and power then releasing power for one second and repressing it while still.holding volume down?

Swizzle82 said:
Are you pressing volume down and power then releasing power for one second and repressing it while still.holding volume down?
Click to expand...
Click to collapse
Hmm...could Try that. But the adb command doesnt do anything either
Edit: tried it. It gave me a factory reset option but no stock or custom recovery

stanleyopar2000 said:
Hmm...could Try that. But the adb command doesnt do anything either
Edit: tried it. It gave me a factory reset option but no stock or custom recovery
Click to expand...
Click to collapse
That's the path to recovery,, press yes twice,,

Swizzle82 said:
That's the path to recovery,, press yes twice,,
Click to expand...
Click to collapse
And this wont brick? I'm worried about potentially not having a recovery and wiping the current OS and not having a way for it to reinstall it (since i may not have a useable recovery)
Btw i appreciate your help greatly

stanleyopar2000 said:
And this wont brick? I'm worried about potentially not having a recovery and wiping the current OS and not having a way for it to reinstall it (since i may not have a useable recovery)
Btw i appreciate your help greatly
Click to expand...
Click to collapse
If it is the stock recovery it will only format your system to how it is out of the box.
If it goes into TWRP then you'll know.

Double0EK said:
If it is the stock recovery it will only format your system to how it is out of the box.
If it goes into TWRP then you'll know.
Click to expand...
Click to collapse
Much appreciated friend, i will definitely try this and report back

stanleyopar2000 said:
much appreciated friend, i will definitely try this and report back
Click to expand...
Click to collapse
THIS GUY saved the damn day!
Thanks to everyone else who assisted me! @Double0EK , @Swizzle82

Swizzle82 said:
Are you pressing volume down and power then releasing power for one second and repressing it while still.holding volume down?
Click to expand...
Click to collapse
That doesn't work for me on my Freedom Mobile H915 with a locked bootloader. I only ask how to without ADB because I want to help someone else that bricked their device upgrading the firmware to factory reset it and/or wiping cache hoping it'll help.

How to flash TWRP and Root Moto X Style on Marshmallow

I am using moto x style and unlocked bootloader with 'Windroid Universal Android Toolkit' v2.5 but cannot flash TWRP and root this apl. Today I tried flash TWRP and then root but after showing 'Congratulation' pop up,my phone stucked on 'No command' page. I tried twice and same result. Later i check there is either no TWRP or root by SuperSU. And i see youtube video and and read many XDA forum and comments and most of the users says the phone stuck on M logo page when reboot after the root process. And all says its a issue with Marshmallow. And most of the xda posts and youtube video are made during 5.1.1 so there is no problem in that video during flash TWRP and root. So i need a seamless process to flash TWRP and root on Marshmallow so that it doesnot stuck on M logo. And I dont want to downgrade to L for root. And unluckily if it stuck M logo thwn what to do to go back to home screen?Thank you.

http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958

Look in my sig...

It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958

acejavelin said:
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Click to expand...
Click to collapse
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?

Atanu Mukherjee said:
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Click to expand...
Click to collapse
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.

acejavelin said:
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
Click to expand...
Click to collapse
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.

Atanu Mukherjee said:
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Click to expand...
Click to collapse
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.

acejavelin said:
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
Click to expand...
Click to collapse
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?

Atanu Mukherjee said:
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Click to expand...
Click to collapse
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?

acejavelin said:
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
Click to expand...
Click to collapse
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.

Atanu Mukherjee said:
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Click to expand...
Click to collapse
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.

acejavelin said:
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
Click to expand...
Click to collapse
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?

Atanu Mukherjee said:
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Click to expand...
Click to collapse
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.

acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
Thank you very much for your kind guidance and quick reply. I will perform this may be tomorrow and then inform you. If it is bricked or stucked in any stage/page then is there any instant process to go back to safety?

acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?

Atanu Mukherjee said:
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Click to expand...
Click to collapse
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.

acejavelin said:
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
Click to expand...
Click to collapse
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.

Atanu Mukherjee said:
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Click to expand...
Click to collapse
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.

acejavelin said:
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
Click to expand...
Click to collapse
After typing 'fastboot flash recovery twrp.img' i switch to recovery and select it. But it shows recovery failed,bla bla in red colour. I tried 3 times but same result. What to do? now again when I go to the recovery,i see still it is the stock recovery.

Problems booting into recovery

Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.

Haphim said:
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Click to expand...
Click to collapse
to confirm, have you verified you are using the correct TWRP version for your V20?
in this step "fastboot flash recovery twrp.img" is your twrp image that you saved, named twrp.img? If its not, that command won't work correctly.
usually after I flash recovery, when still in the recovery menu, i choose reboot recovery just to make sure it did stick. If it reboots back to itself, then try rebooting the device, and again confirm with manually entering recovery. Maybe overkill but it works for me LOL.
Good luck!

I am in need of big help! I made a critical error after days of trying to navigate the minefields of rooting my device. I have a LG V20 h910 and it is no one-click wonder root. It made me work for it and I finally got it. I loaded LineageOS 14.1 and all was good until the USB OTG cable from my PS4 controller did not register anymore. Damn, that was a let down, and probably led to my careless move of needing to downgrade my TWRP, saw the version I needed, forgot these are device specific, and now I'm stuck in a hard place.
Perhaps the fix is easy, but I have not found the answer after many, many searches...
I had TWRP 3.2.1-2 and needed to downgrade to 3.2.1-0 to try SuperRom (hoping it would have OTG ability). I hastily grabbed the first TWRP 3.2.1-0, threw it on the SD card, wiped everything except internal storage, and flashed the img, and did a reboot. Road block went up.
I tried getting back into recovery, did the PWR and DOWN pressing combo and got the Factory Reset screen, but after clicking "Yes" to both, instead of getting the TWRP screen, I got this error screen (attached).
I tried another idea - hooked it up USB to my PC and tried accessing it via adb/fastboot. I tried multiple drivers for my device, but no adb and no fastboot devices were ever found. The only thing that almost worked was booting phone into FASTBOOT mode by holding DOWN btn and plugging in a USB cable attached to PC. Once in FASTBOOT mode, My PC at least saw the ID for fastboot device. I tried to flash TWRP via fastboot, and it looked like it would happen, but in the end there was no phone screen response to my attempt, and the cmd window on my PC would get stuck and just hang.
Can someone please advise me on how I can fix this problem?

Stuck on "Fastboot Mode" screen

I stupidly tried using franco's app to flash cleanKernel on my rooted phone on 9.0.11, it failed of course and now can't boot my phone. I'm able to fastboot boot twrp.img but I'm not sure what is needed next. I've downloaded the full 9.0.11 ota file thinking something in it (or all of it) needs to be flashed from twrp. Afraid to do anything at this point for fear of losing data. Any tips are appreciated.
I've downloaded mauronofrio's rom-stock-fastboot utility but see he says it will clear data. I'm assuming all the .bat files will do this. Any way to avoid clearing internal storage?

soundneedle said:
From bootloader screen, using fastboot boot twrp.zip results in OP going to "Fastboot Mode" screen...and staying there. The zip is pushed to the phone but won't boot into TWRP. This started after I stupidly tried using franco's app to flash cleanKernel on my rooted phone. It failed of course and now can't boot my phone. My phone recently updated itself to 9.0.11, fyi.
Any ideas on how to fix this boot issue? Is it just a matter of flashing something from the full ota 9.0.11 file---some img file or something?
Click to expand...
Click to collapse
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?

I was able to recover...thank god. Just used mauronofrio's flash utility. Removed the "-w" flag from the flash-all.bat file and all is good.

Stuck on Fastboot Mode screen once I run fastboot boot twrp.img
bp328i said:
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?
Click to expand...
Click to collapse
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s

Is the twrp.img even being flashed
SimmoMaz said:
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s
Click to expand...
Click to collapse
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing

SimmoMaz said:
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing
Click to expand...
Click to collapse
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...

TWRP isn't there
lilbrat said:
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...
Click to expand...
Click to collapse
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S

SimmoMaz said:
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S
Click to expand...
Click to collapse
Ok.. are you using the latest TWRP? If you want in the guide section you can you the msmdow like ad tools to reset you phone to stock, and retry again..

THIS. I have the exact same issue. In short, I have the T-mobile version, and was able to unlock successfully. I am using twrp-3.2.3-0, and I have the img and zip in the same folder, same way Techibee does on Youtube. I then type "fastboot boot twrp-3.2.3-0-fajita.img", I get the "OKAY... OKAY... Booting... Finished" response in console. Then, the Fastboot screen appears and never leaves. I have done this 3 times now. I kept tweaking the process, but I'm nervous to keep debugging.

Stuck (
Hello guys,
I wanted to overclock my 6t global. so i had unlocked the bootloader then flashed the twrp. In twrp i firstly reset the os to factory setting and then i flash magisk and smurf kernel. but when i reboot after this my phone is stuck on the phone unlocked message.
ive tried flashing magisk only and then boot, it works. but when i flash smurf kernel i get stuck . why this happening plz help (

Stuck on fastboot No matter what I do

No matter what I do my phone is just stuck on fastboot no matter what button I press it will go back to fastboot in seconds. *what I did that made it happen... I tried to backup my phone with twrp and it didn't work and when I pressed on reboot I accidentally pressed on something that has an A or B in it's name (i forgot). then i rebooted and it just started to bootload in twrp. I tried to go to fastboot and after that for some odd reason it just kept bootload in fastboot. (Im sorry that I explained it like a mess but I don't really know what happend and I'm really bad at this phone stuff). Please

AlmogL1 said:
No matter what I do my phone is just stuck on fastboot no matter what button I press it will go back to fastboot in seconds. *what I did that made it happen... I tried to backup my phone with twrp and it didn't work and when I pressed on reboot I accidentally pressed on something that has an A or B in it's name (i forgot). then i rebooted and it just started to bootload in twrp. I tried to go to fastboot and after that for some odd reason it just kept bootload in fastboot. (Im sorry that I explained it like a mess but I don't really know what happend and I'm really bad at this phone stuff). Please
Click to expand...
Click to collapse
When in fastboot go down with volume up to you see recovery that should boot to twrp then if your in slot a press reboot to slot b or the other way round that should fix

jaythenut said:
When in fastboot go down with volume up to you see recovery that should boot to twrp then if your in slot a press reboot to slot b or the other way round that should fix
Click to expand...
Click to collapse
The problem is that even when I do that it keeps booting to fastboot no matter which option I pick.

Flash a TWRP, flash a rom from oneplus site via adb sideload, make a reboot, after will show the recovery, make a factory reset and you will have a phone
If you want a magisk only you can flash the patched boot img.