Database Users

Really Bricked my new Galaxy Tab 2 7 inch. I have tried everything :(

Hello, I so hope someone can help. I just updated my galaxy tab 2 7 p113 to Android 4.0.4 UEBLH2. That was done automatically from samsung. I wanted to then install the newest update to 4.1.1 jellybean. So I downloaded it from this link. http://www.trickytweaks.com/update-...ecli4-4-1-1-jelly-bean-ota-test-firmware.html. I put the official Android 4.1.1 UEBLH2 Firmware on my sdcard then held down my power and up volume and installed it. HOWEVER, it never finished installing. Went all the way to the end. Now I HAVE NO USB CONNECTION and NO BOOT UP. Just black Since I dont have usb connection I cant us oden. CAN ANYBODY PLEASE HELP? I still can put files on my micro disk card and then put sd disk in my tab and use the power button up arrow to install something but I tried installing clockwork mod but that did not work. Iam out of ideas. P.S. My tab IS NOT ROOTED. I tried updating back to and original rom 4.04 I download but that did work. Thank you.

I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2

Mohamedselim said:
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
Yup, this should get you going again. If you can get into download mode, you should be okay. That's what Odin needs.
Download mode is volume down plus power. Then volume up
Recovery mode is volume up plus power.

I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.

I can not understand how you can not access usb, is it a lacking driver so download kies and reboot and try connect again ,also try a different usb ports (esp the rear of case) of your computer
Was usb working before the problem?
do you have cwm or stock recovery?
If cwm so download cm10 or cm9 from www.teamhacksung.org and put in usb card and flash but do a cash delete and dalvik delete afterwards not for boot loop
If stock so try stock firmware from www.samfirmware.com (register their first) and put in sd card and try to flash
Sent from Galaxy S2 or Galaxy Tab2

growthweb said:
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
Click to expand...
Click to collapse
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.

All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
dictionary said:
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
Click to expand...
Click to collapse

growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
How about you just gtalk me, lol. I'll probably reply faster there anyway. deliberation at gmail dot com.

Don't use kies. Install the Samsung driver for mobile phones (Google it).
Sent from my GT-P5113 using Tapatalk 2

Download Mode
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
Once you are in download mode, connect your tab to the computer with the usb connection.....you should see a com xx number pop up in Odin in yellow reporting your device is connected thru a communication port. From there you will be able to choose the file you want as a PDA uncheck everything else...reboot...reset timer....whatever. Just make sure you have the correct firmware. There is a Odin flashback to Stock rom in the development section. Make sure it's for your device. Once you start Odin, should take about 4 mins...disconnect and hold the power button down to reboot. That's it....

Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help

growthweb said:
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
Click to expand...
Click to collapse
Glad you got it sorted.

i jus did the same thing u did
hi how r u doing. i jus did the same mistake u did and i really need your help please

Maxwell255 said:
hi how r u doing. i jus did the same mistake u did and i really need your help please
Click to expand...
Click to collapse
Hi.if u have done the exact same thing then just read the previous page and comments.
Sent from my GT-P3110 using xda app-developers app

Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.

PeartFan40 said:
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Click to expand...
Click to collapse
Thread is still actually open, lol

Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????

igotbricked said:
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
Click to expand...
Click to collapse
You have to reflash your tablet using ODIN. It's not that hard. Just follow the second method here (you don't need to download android SDK)
copy this in your navigator bar : rootzwiki . com/topic/37272-verizonsch-i705-root-for-all-current-firmware/ ( delete space around the dot)
Plus, your tab will be rooted.
You're welcome.
P.S : This limitation of URL is annoying as hell.

[Q] S4 stuck on "Samsung Galaxy S4 GT-I9505" logo

Hello guys,
Previously, i tried to root my S4 and somehow it failed. I got this error message like "Super SU binary not installed.." I wanted to get rid of supersu in the system because it is giving me problems like my wifi cannot enable anymore. So, i performed backup and reset option but the supersu program is still inside my phone. i then tried to play with the recovery mode: "apply update from external storage" with the file - I9505_Omega_v3.0_XXUAME2_md5_05D08D598EF1873761CFF710BB628B25.zip, "wipe data/factory reset", "wipe cache partition", etc. After i performed them several times, my phone now is not booting and only stuck at Samsung Galaxy S4 GT-I9505" logo.
i've been reading several forums and most of them are saying that Flash ROM is needed. Therefore, i tried to download I9505XXUAME2_I9505OLBAMDM_SIN.zip from samfirmware.com but before the download finishes, my pc is showing me error message against this file and thus, the download is unsuccessful! Im running out of solutions guys, i really appreciate if you could help me.

What phone model do you have is it SPH-L720? Or the European version?

ODIN
s4mania said:
Hello guys,
Previously, i tried to root my S4 and somehow it failed. I got this error message like "Super SU binary not installed.." I wanted to get rid of supersu in the system because it is giving me problems like my wifi cannot enable anymore. So, i performed backup and reset option but the supersu program is still inside my phone. i then tried to play with the recovery mode: "apply update from external storage" with the file - I9505_Omega_v3.0_XXUAME2_md5_05D08D598EF1873761CFF710BB628B25.zip, "wipe data/factory reset", "wipe cache partition", etc. After i performed them several times, my phone now is not booting and only stuck at Samsung Galaxy S4 GT-I9505" logo.
i've been reading several forums and most of them are saying that Flash ROM is needed. Therefore, i tried to download I9505XXUAME2_I9505OLBAMDM_SIN.zip from samfirmware.com but before the download finishes, my pc is showing me error message against this file and thus, the download is unsuccessful! Im running out of solutions guys, i really appreciate if you could help me.
Click to expand...
Click to collapse
Head over to http://galaxys4root.com
They have a lot of useful tools and youtube videos on how completely restore your phone to stock.
What I would suggest is to follow the method listed on this site under the "GS4 stock firmware" tab.
To do this, use ODIN (which is a leaked software from samsung used to flash firmwares to devices) to re-flash the firmware to the phone (recovery and all)
THIS WILL DELETE ALL DATA ON THE PHONE!
It sounds like you don't have any acces to the phone, so I'm sure that is the least of your worries.
Use either this site or the sam firmware website.
CONFIRM WITH THE LABEL UNDER THE BATTERY FOR YOUR DEVICE MODEL NUMBER
You MUST use the correct firmware, otherwise you will run into problems like this.
Once you have the odin, drivers, and firmwares downloaded, run ODIN (with admin privileges) and select the firmware that was downloaded for your device for the PDA section.
Unplug the phone from the computer, boot into "download/odin mode" by starting from the phone turned off, turn it on, but before pressing the power button, old the home and vol down buttons, then power button.
Once you see the download mode on the phone screen, and the odin software recognizes it, there will be a button on ODIN that says "flash" or something to that effect.
Let the software do its thing and you should be good to go.
If you are using a windows PC, you need to make sure you have all the drivers, if you are using a mac/linux machine, there is a program called "Heimdall" that is an open source, cross platform version of ODIN, but I personally haven't had any luck with it, and I resorted to dual booting my mac with Windows 7.
If you have any questions feel free to reply, as I pretty much always have a phone/tablet/computer in front of me and will be able to see your reply quickly.
Good Luck!

[How to][guide] UPDATE TO 4.4.2 BOOTLOADER AND ROOT TMO/CANADIAN VARIANTS

The point of this thread is to help people safely update their bootloader so that they may flash a touchwiz kitkat rom.
I have seen several threads where people are running into issues and even development threads get cluttered with questions. So I will give you the steps needed using my method.
Please note this is for windows 7. However it should work on other versions of windows too.
This method may wipe your internal storage completely so transfer anything you do not wish to lose to you pc.
This method will also trip yout knox counter which may void your warranty.
You also may not be able to downgrade to 4.3 so make sure this is what you want to do
I am not responsible for bricked devices. Proceed at own risk
You have been warned!!!
So what you need to do is download a few files.
I have created a zip file and uploaded it for easy access and simplicity reasons. If it becomes out dated I will update accordingly.
What is needed is your variants stock firmware. You need to get the one for your device off sammobile.com
On sammobile you must create an account in order to download (if you don't have an account already).
Once you are logged in click on the firmware tab. Then enter your device name.
Canadian variants enter: SM-N900W8
TMO variants enter: SM-N900T
You will then be able to pick the most recent firmware for your device and download it. So now that you have the correct firmware (please double check, and if unsure google it)!!!
So lets begin
You also need to download the zip file I have made and extract it. Inside it you will find the samsung drivers, 3 recovery options to pick from, the supersu.zip and also odin.zip. once you've extracted the file you've just downloaded you need to extract the odin.zip inside it as well.
So if you have not previously installed the samsung drivers you will need to do so. Simply run the samsung mobile driver.exe file and install it. Once successful in installing, reboot your pc.
when it boots up, connect yout device to you pc and transfer over the supersu.zip over to your phone. The root of your sd card is recommended for easy access.
Now what you need to do is ensure usb debugging is enabled. Do so by going to settings, general, developer options and ensure its checked. If you do not have developer options simply go to about phone, and tap om build number 7 times to enable developer options.
Once this is done you need to power off your device with it unplugged. Now we need to enter download mode. You can do this by holding the home button, volume down and pushing and hokding the power button. You will be presented with a warning screen. You push volume up to proceed or vokume down to cancel and restart device.
We want to push volume up. It will then show a big android saying warning do not turn off target.
Now connect your device to your pc and run odin as administrator.
In odin near the top left you shoukd see a box colored in saying:
Com and have a number. If you see this that means odin recognizes your device. If you do not that means eiter you dont have the drivers installed properly or perhaps you need to try a different usb port or cord.
You then will see a few check boxes checked off. Auto reboot and f.reset time. leave these checked only.
Theres an AP BUTTON. Click this button and then navigate to your stock firmware file you've downloaded and select it. It may take a few minutes to load it. Once it does load all you need to do is click the start button and let odin do the rest. Do not touch anything.
This will take a few minutes. You should see a green "pass" in the box at the top left. Your device will eventually reboot and you will now be stock, unrooted on the latest firmware.
*please note that if at this point your device hangs on the Samsung logo sayong "recovery booting" you need to pull the battery and reflash the firmware. This time also check the repartition box.
Now we need to root and flash a custom recovery.
Again you'll need to enable usb debugging on your phone so I recommend skipping the google setup stuff on your phone.
Once you have enabled it, power off your phone with it unplugged and again enter download mode the same way you did before.
Plug in your device and in odin press the reset button to clear the stock firmware file.
Now connect your device to your pc and again ensure that odin recognizes it.
Click the AP BUTTON again and this time navigate to the custom recovery of choice ( I reccomend twrp. I am also using the tmo version as I could not get the canadian version to boot)
Once selected again hit the start button. In a few seconds you should again receive a "PASS" message. That mrans you have successfully flashed a custom recovery.
Now power off your device and unplug it. Now we need to enter recovery.
Do so by pressing the home button, volume up, and push and hold the power button. Once you see recovery booting you can let go. You will also see in red font: recovery is not seandroid enforcing. That just means you have a custom recovery.
If your device hangs at this screen you will need to oower it off and try a different recovery.
Once in recovery I reccomend making a nandroid backup. (Optional)
Next we are going to root. All that you need to do is press install or install zip from sd card depending on which recovery you chose and navigate to the supersu.zip
Now install the zip by following the instructions of the recovery and then reboot.
Congratulations you are now rooted (you can confirm if you like by downloading the root checker app if you wish) and on the latest firmware and can flash custom 4.4.2 roms for your device. Please read and follow the directions of the op in the thread of the rom you wish to flash.
Download link: http://d-h.st/4xl
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

phone stuck on recoveryboot a
Theres an AP BUTTON. Click this button and then navigate to your stock firmware file you've downloaded and select it. It may take a few minutes to load it. Once it does load all you need to do is click the start button and let odin do the rest. Do not touch anything.
This will take a few minutes. You should see a green "pass" in the box at the top left. Your device will eventually reboot and you will now be stock, unrooted on the latest firmware.
= at this part of the instruction odin has said pass but my phone just has samsung logo and says on top recovery boot... and nothing else i dont know how to continue or move forward i hope someone can help me thank you and sorry for troubling you

nymomo789 said:
Theres an AP BUTTON. Click this button and then navigate to your stock firmware file you've downloaded and select it. It may take a few minutes to load it. Once it does load all you need to do is click the start button and let odin do the rest. Do not touch anything.
This will take a few minutes. You should see a green "pass" in the box at the top left. Your device will eventually reboot and you will now be stock, unrooted on the latest firmware.
= at this part of the instruction odin has said pass but my phone just has samsung logo and says on top recovery boot... and nothing else i dont know how to continue or move forward i hope someone can help me thank you and sorry for troubling you
Click to expand...
Click to collapse
I replied to your pm you sent me. Anyway just flash a different recovery if it's hanging after flashing recovery. If its hanging after flashing stock 4.4.2 firmware try it again by oulling battery and going back into dl lodem this time also check the repartition box
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

Where are the download links?

Arturofm2 said:
Where are the download links?
Click to expand...
Click to collapse
Well if you're having to ask this then that leads me to believe you did not read the op. I suggest you do so or you may have a bad experience. Once you read all of the op I will tell you where it is
Sent from my GT-I9205 using Tapatalk

markbencze said:
Well if you're having to ask this then that leads me to believe you did not read the op. I suggest you do so or you may have a bad experience. Once you read all of the op I will tell you where it is
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Now I see the download link, but it wasn't there yet.
Thanks, by the way you said that it may be difficult to go back to a different version, does this include the backups too?

Arturofm2 said:
Now I see the download link, but it wasn't there yet.
Thanks, by the way you said that it may be difficult to go back to a different version, does this include the backups too?
Click to expand...
Click to collapse
Yes
Sent from my GT-I9205 using Tapatalk

My phone is not flashing
its working never mind lol. I just tried again and it worked

regarding the stuck on RECOVERY BOOTING, you have to reflash it, WITHOUT ticking the REPARTITION (as stated in the instructions. you just need to reflash again. and it should work the 2nd time around

Thanks very

How can i get it to work with mac
Sent from my SM-N900T using xda premium

westkhalifa13 said:
How can i get it to work with mac
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
No idea man. I don't have a mac. Google it man
running DECEPTICON rom (coming soon)
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

Samsung Galaxy Tab 4 10.1 SM-T530 Bricked (Probably)

Hello, sorry if in bad place, but im new here.
I have a problem with [Samsung Galaxy Tab 4 10.1 SM-T530].
I had a custom rom, but now i flashed stock rom. When it booting i see "Samusng GALAXY TAB4" logo.
I can't find it in the internet because one thing is different. That difference is this, i hear all system sounds, like volume changing, when i touch somewhere, where is a button under this logo, i also hear a touch sound, and voice assistant when i by accident turn on it.
It look like system be turned on, but device showing a mask, wich mask is this Samsung logo.
And sorry for my bad english. ;P

Same for my problem from my SM-T531 before, but I fixed it by flashing the stock ROM made for my tablet.
Fix (I did this on my own without researching. It may work, but try)
I. Find the stock ROM made for your device (SM-T530) then download it. Make sure you select the correct region (Country in which where you bought the device)
II. Download Odin (the latest one)
III. Now open Odin on your PC. (Doesn't matter if you run it with Administrator, but recommended to open it with Admin rights)
IV. Boot your device to Download Mode (Power button+Volume Down+Home button)
V. Connect your device to the PC with the connector that came from the tablet
VI. Odin must detect your tablet
VII. Find and open the zip archive for the Stock ROM then extract the item inside the archive somewhere like your desktop.
VIII. Finished, now browse and find the file you extracted through Odin. (For browsing, click the AP button)
X. WAIT for few minutes!
XI. If it's finished checking the md5 file, check the F. Reset Time and Auto Reboot if not checked yet. Click Start if you're ready.
XII. WAIT for some minutes!!!
XIII. Finished, now it will boot. Remove the cable connector from the PC and wait for minutes
XIV. Now the boot process should show the animated Samsung Logo.
[This process will wipe every single data on your internal storage and /data/data folder so make sure you click the Start button if you really want to clear. I suggest you move the files on your Internal Storage to the computer to be safe. Make backups to be safer.]
Any discrepancies, post to the next reply and I'll fix it :good:

Tab A SM T550, android 6.0.1 root problem

I am trying to root my Samsung Galaxy Tab A SM T550, android 6.0.1 and having a problem. The root seems to work fine but upon re-boot I am stuck at the first Samsung Logo. I can’t do anything from there accept go into downloading mode and flash stock recovery and then the tablet works again but isn’t rooted.
I am using this root method; http://www.howtorootphone.com/2016/09/Root-galaxy-Tab-A-9.7-on-6.0.1.html
How to root Galaxy Tab A 9.7
1. Install the USB driver for your tablet into your computer.
2. Enable USB Debugging on your tablet by going to Settings>>Developer options and tick USB Debugging.If your tablet misses Developer options the go to About and tap on Build number 7 times.
3. Power off your tablet and boot into download mode by pressing and holding Volume down, Home and Power button together.
4. Connect your Galaxy Tab A 9.7 to your computer using a data cable.
5. Unzip Odin3 zip file and open Odin3.exe.
6. Make sure that only "Auto Reboot" and "F.Reset Time" is selected in the options menu of Odin.
7. Unzip CF-Auto-Root file and get the root file for your tablet.
8. Click on AP button and select the root file.
9. Click on Start button to begin the rooting process.
Any ideas about what went wrong? Help!!!

Sorry, tried to delete but didn't see how. I think I'll find my answer here; http://forum.xda-developers.com/gal.../root-samsung-galaxy-tab-9-7-sm-t550-t3126827

ahunter said:
Sorry, tried to delete but didn't see how. I think I'll find my answer here; http://forum.xda-developers.com/gal.../root-samsung-galaxy-tab-9-7-sm-t550-t3126827
Click to expand...
Click to collapse
hey i've got the same problem with the same tablet! Did you solve it?

https://forum.xda-developers.com/galaxy-tab/development/guide-twrp-r-t3390115
I did this and this worked for me the same...
But in the last , the reboot screen is there and phone isn't starting . Please help as fast as you can .

Root with super su, go to supersu.com then download the recovery flashable one. If you can't boot to your tablet restore a backup or flash stock rom, hope this helps!