Hi Guys!
I am trying to root my nexus, unlocked it, installed the right usb drivers, I can see the phone and everything looks right.
Downloaded Superboot for ERE27 with himem enabled and ran this. no problem.
I put the img file on the SD card and when I boot the phone in Fastboot / Recovery it does not find and img files on the SD card.
I tried 2 different cards and also different img files.
When I do this I get first the message no images found than I see the droid with a triangle and a ! in it. - Have to pull the battery.
Ideas anyone?
Thanks
What are you trying to do?
1) you had to unlock the bootloader which enables you to install a new recovery image (which is needed to allow you to install new roms)
2) you had to apply the recovery image Amon RA via a command prompt and a batch file if you use Windows. The phone's USB connection needs to be in development mode and once the batch file executes and successfully finishes you need to reboot the phone.
3) you restart the phone into bootloader mode, use the volume rocker to select the recovery console. If you end up with an andriod and exclamation symbol the Amon RA recovery file was not installed.
4) the new recovery console allows you to clean the SD card. Install roms from the SD card and some other commands. The Roms for the Andriod are in ZIP format and do not need to be unziped. In other words all you need to copy to the SD card is the full ZIP file (approx 75MB) and install that directly from the recovery console.
If your android stays in the booting sequence which is shown as the X with flying little pixels, it's most likely because you did not wipe the device clean first. That item is in the recovery console as well.
Hope this helps. I am just as new to this as you are.
You didn't unzip them did you?
You're trying to root with superboot. Great, but the recovery is not capable of flashing .img files, only .zip updates and roms and such. .img files have to be flashed using fastboot, not recovery, and are flashed from the connected computer.
If you read the superboot instructions from wherever you got the file, you'll see that you have to put the .img in the same directory ON YOUR COMPUTER as fastboot, connect via USB, boot the phone into fastboot, then enter the appropriate command line on the computer to flash the file.
If you've done that, then you are officially DONE with the rooting process.
Also, make damn sure that the superboot version matches the software version on your phone. They're both ERE27, right?
I'm not sure what anosis's post is talking about, but that looks more like the process for installing a custom rom (ie cyanogenmod), than rooting.
To root your phone, you DO NOT need Amon-RA's recovery. You only need that if you want to install custom roms, etc. It wont hurt to have it, as it includes many more functions than the stock recovery, but just to root, you don't need it.
Summary:
If you flashed the superboot.img from your computer via fastboot, your phone is rooted. Done.
You don't need to do anything in the recovery at all for rooting. Only for installing update.zips and custom rom.zips.
Hey, So I have been scouring the forums trying to find some answers about this and you seem to be the closet to my situation. Here is what I did:
So I was running a CM9 Aplha, reverted back to stock 2.3.6 [1ada25375426.signed-soju-ota-189904.1ada2537]) so that I could then apply ICS update [VQ8PQk_V]) which I sucessfully did. This was about a month ago and it was all going well.
Then yesterday I wanted to upgrade to 4.0.4 [hR7QFEtn] so I did and superuser wasn't working properly but then I reinstalled it and got it to work. However I got to the point where everything was working fine EXCEPT for the Google Play store kept on force closing. I spent hours trying last night and could not find a solution.
I tried restoring the previous ICS update that I had and it worked, and then I tried updating again. Also side: My clockwork was on the fritz lately so I was using Zedowmaxs force into clockwork recovery image [fastboot boot recovery3101.img] to force it in sometimes.
Anyway bottom line here is where my REAL ISSUE begins. I decided just to wipe everything and start anew. I factory reset/ wiped properly [cache partition and davliche cache] and then locked my bootloader again. Then tried rebooting. Got stuck on Google screen. Then I unlocked my bootloader again. Tried again, same issue.
So, here is where I am at. Cannot get into recovery from fastboot, takes me back to fastboot. AND, everything is wiped because I locked/unlocked my bootloader. All I can do is adb commands.
I don't know what to do from here and there is a lot of things going on. If you could help that would be great!? What I am going to try next is to flash some recovery on, but I don't know which one/ try to mount a file to my sd card from adb commands.
Daboxk said:
Hey, So I have been scouring the forums trying to find some answers about this and you seem to be the closet to my situation. Here is what I did:
So I was running a CM9 Aplha, reverted back to stock 2.3.6 [1ada25375426.signed-soju-ota-189904.1ada2537]) so that I could then apply ICS update [VQ8PQk_V]) which I sucessfully did. This was about a month ago and it was all going well.
Then yesterday I wanted to upgrade to 4.0.4 [hR7QFEtn] so I did and superuser wasn't working properly but then I reinstalled it and got it to work. However I got to the point where everything was working fine EXCEPT for the Google Play store kept on force closing. I spent hours trying last night and could not find a solution.
I tried restoring the previous ICS update that I had and it worked, and then I tried updating again. Also side: My clockwork was on the fritz lately so I was using Zedowmaxs force into clockwork recovery image [fastboot boot recovery3101.img] to force it in sometimes.
Anyway bottom line here is where my REAL ISSUE begins. I decided just to wipe everything and start anew. I factory reset/ wiped properly [cache partition and davliche cache] and then locked my bootloader again. Then tried rebooting. Got stuck on Google screen. Then I unlocked my bootloader again. Tried again, same issue.
So, here is where I am at. Cannot get into recovery from fastboot, takes me back to fastboot. AND, everything is wiped because I locked/unlocked my bootloader. All I can do is adb commands.
I don't know what to do from here and there is a lot of things going on. If you could help that would be great!? What I am going to try next is to flash some recovery on, but I don't know which one/ try to mount a file to my sd card from adb commands.
Click to expand...
Click to collapse
It looks like the time when you were locking-unlocking the bootloader, you messed up the recovery. Since your phone can get into bootloader menu, I think you can get out of this issue.
Here is what I would do.
1. Unlock the bootloader.
2. flash clockworkmod recovery using fastboot USB.
3. Download recovery-RA-passion-v2.2.1.img, put it in C:\fastboot\
4. Shut down your phone. Then start your Nexus One in Fastboot mode by holding down the Trackball and press the Power button.
5. Connect your phone to your computer. Open a Command Prompt (Start -> All Programs -> Accessories -> Command Prompt), and run the following commands:
cd C:\fastboot
fastboot devices
fastboot flash recovery recovery-RA-passion-v2.2.1.img
now see if you can get into recovery. If you can, just flash a custom rom using install zip from sd card option in the recovery
I didn't read all the replies but fastboot reads from your PC's disk not the sdcard, unless you are running it through shell or something?
I tried to prevent my phone from updating to 6.2.1 by changing /system/etc/otacerts.zip to /system/etc/otacerts.zip.bak. When I did this it rebooted into CWM and looks for update.zip (i renamed it b/c i didn't need it). now it loops because I can't choose to anything other than install update.zip
ADB won't find the device so I can't rename the file or push a new one. I built a factory cable which appears to work but I still can't see my KF. When I run lsusb it shows 1949:0006 Lab126 as the device.
Any ideas?
using Ubuntu 10.10
<update>
I can adb shell now. however, no adb functions seem to work. Anyone know how I can keep cwm from hi-jacking my boot? I would gladly go stock to get going again.
I tried to follow this thread: http://forum.xda-developers.com/showthread.php?t=1356257
But I am getting the errors: adb: not found -or- adb permission is denied. how can I solve this? I have the original framework-res.apk. However, I screwed up with the one on my kindle and now it is bricked at the logo screen.
HELP?
i was having the same problem - where i was going wrong was not remounting the kindle device via adb
once i ran adb remount i was able to get the file back in place.
Sorry, but I really can't mount ADB Remount.
No adb commands will work for me. I either get:
-exec '/system/bin/sh' failed; No such file or directory (2)
-or-
adb: permission denied
-or-
the other error listed above.
My question; can someone walk me through step by step what to do if I bricked by messing up the framework-res.apk? Please?
Do you have TWRP? Did you take a backup first? You shouldn't be messing with system files that are required for booting without doing this first. The procedure for recovering should just be booting into TWRP and restoring your backup. Backups backups backups.
If you don't have a backup, but do have TWRP, does adb work in TWRP so you could try it there? (I'm at work so I can't double check that)
If none of these work, you might be able to get the system to boot into fastboot and get TWRP on there, Vashypooh or one of the TWRP guys would be more helpful than I would be for that. The only other option is a factory cable (there's at least one thread on here for that).
Ok, so rooted (razorclaw) ics 4.0.3 tf-101.
fully charged
when powering on, stalls at the eee pad screen. (sounds like a boot loop, but it doesn't go to recovery)
Cold boots fine, works great, no random reboots (yet)
Will not boot into recovery, has ww_epad-9.2.1.11-20120221 bootloader
stalls at "booting kernel image" I assume there is no recovery installed.. Tried to get cwm onto it but I cant get apx working, it wont recognize the device at all.
I didn't root it, someone else did and I have no idea what recovery is/was on it.
I bought the tablet used, and would like to fix it.
Once recovery is installed would this boot normally.
Ive been searching on here/transformer forums for a couple weeks and have thought I found the answer multiple times. I need a push in the right direction.
Tried to fix this for a while a couple months ago when ics first launched and gave up. (did the same thing when It had honeycomb on it)
edit::
the only solution I can come up with is using NVFLASH to try to restore it. Working on this right now, hopefully this is a sbk1//not working, cant seem to get the computer to recognize the device in apx mode. (win 7)
If your TF is rooted, you may want to give the RecoveryInstaller app a go.
http://forum.xda-developers.com/showthread.php?t=1346180&highlight=recovery
I forgot to add that I have tried that (tried it again just now.. twice, just incase it happened to work but it didnt.)
following these instructions:
"click the button and the Superuser app will ask for permissions. Then the tablet reboots and to enter it you have to keep the Volume - key pressed and when it the TF writes "Booting into recovery" on the screen press Volume + once"
also tried it without holding volume buttons when it reboots.
When I run it, and click the button to install recovery, it grants superuser permissions and then reboots, sticks at the eee pad screen again and it stalls at booting recovery kernal image. Anything Im missing?
Reflash a recovery image .sos and bootloader .ebt if the recovery image doesn't work.
Download any cwm flashable recovery and extract it twice to get the recovery blob out:
put the recoveryblob on your computer somewhere.
adb push C:\Location\Of\Blob\blob.blob /sdcard/
adb devices
adb shell
su
dd if=/sdcard/blob.blob of=/dev/block/mmcblk0p4 -
reboot
--
this should fix recovery.
Thanks for breaking that down! Im going to try this once I can get adb working.
Going to try another computer now. I'm beginning to wonder if the usb cord for my tf has gone bad.
You can do it on your tf too, via terminal emulator app since you can coldboot.
Download blob somewhere on tf, download term em. and run this part:
su
dd if=/Path/to/recoveryblob of=/dev/block/mmcblk0p4 -notice path/to is where you placed on Tf's INTERNAL storage.
reboot
Ok, went through it on the terminal emulator. Everything seemed to go ok, but on rebook, it still wont enter recovery (held the vol button of course) just hangs on "booting recovery kernal image"
Is BusyBox installed?
That it is, just reinstalled 1.20.. should i use a different version perhaps?
Ro.secure set to 0?
see the guide to flashing an insecure boot.img if it isn't, this may be the problem.
if you're on a rom this isn't the issue..
Try a different version of BB I suppose
simplywinter said:
Ok, went through it on the terminal emulator. Everything seemed to go ok, but on rebook, it still wont enter recovery (held the vol button of course) just hangs on "booting recovery kernal image"
Click to expand...
Click to collapse
Suggest you try method 3 in the following post.
http://forum.xda-developers.com/showthread.php?t=1622628
It does not require rooted TF. If you do everything right but still not working, you may have a faulty device.
^^ My peri runs that method, so that didn't work. :/
I think borked hardware, try NvFlash
just did this
ls - l /system/xbin/su
getprop ro.secure
returned: 0
So it is indeed set to 0.
NVflash.. well I would do that if I could get the usb connection to the computer working.. Still trying that.
Also, kokopopz
I went through method 3 on the tf itself, unfortunately it didnt work. Still trying to get adb working to try it that way.
simplywinter said:
I went through method 3 on the tf itself, unfortunately it didnt work. Still trying to get adb working to try it that way.
Click to expand...
Click to collapse
The following guide will be useful for setting up ADB.
http://forum.xda-developers.com/showthread.php?t=1071584
For the USB driver, you can try the naked driver.
http://forum.xda-developers.com/showthread.php?t=1514942&highlight=naked
Note: I am a linux user. I set up ADB on my linux box. I did not try the above myself. I just came across them. They maybe useful to a Windows user.
Windows drivers are finicky, make sure you totally uninstall and reinstall them too. Took forever to get right on my computer.
no go with windows. I still cant seem to make this work... I have ubuntu on my laptop though. Can I even do this on Ubuntu? its 11.04
You can do this with Ubuntu no drivers required, just pick up the Nvflash wheelie for linux and get yourself a reflashed ROM.
Also you can still do this on TF. I had a very similar issue that I was able to fix by using Rayman's Blobtools (you can pickup blobunpack for windows in my bootsplash screen change guide).
Download the latest stock ROM for your device, and extract the 'blob' file out of it.
Put the blob in the same folder as blobunpack.exe, then open a command prompt and cd to the directory, then run:
Code:
blobunpack blob
After that you will see that there are now many blobs, one of them is called blob.EBT, this is your bootloader blob. What you want to do is copy that to /sdcard/ on your tf via mass storage or 'adb push blob /sdcard/' (You Have to remove the .ebt extension, it's just there as an ID, so it should just be 'blob')
Once that's there flash it through the staging partition (In terminal emulator or adb shell):
Code:
su
dd if=/sdcard/blob of=/dev/block/mmcblk0p4
reboot
Then it shouldn't get stuck at the Eeepad screen anymore!
If it still does, you might have that weird problem where nothing flashed through staging partition sticks, so you'll need to run Roach2010's fix.
after trying that.. twice. It doesn't seem to stick. Roaches 2010 fix it is, searching for it right now.
If you can get adb shell access (I'm assuming yes) PERI has the fix bootloop option. Otherwise run roaches fix AFTER flashing a new recovery and EBT partition but BEFORE rebooting.
how do i run roaches fix. i Dont understand that part. I understand the rest though.
I trashed my rooted Lollipop ROM by renaming a system file & now it gets stuck in a bootloop. I was hoping to restore the old filename using adb. I can boot into stock recovery adb but it's stuck at sideload. Is there a way to change it to adb shell? Will renaming the system files back to their original names trip Knox?
EDIT - never mind, I just went for a reinstall