not sure what to call this problem - Eee Pad Transformer General

Ok, so rooted (razorclaw) ics 4.0.3 tf-101.
fully charged
when powering on, stalls at the eee pad screen. (sounds like a boot loop, but it doesn't go to recovery)
Cold boots fine, works great, no random reboots (yet)
Will not boot into recovery, has ww_epad-9.2.1.11-20120221 bootloader
stalls at "booting kernel image" I assume there is no recovery installed.. Tried to get cwm onto it but I cant get apx working, it wont recognize the device at all.
I didn't root it, someone else did and I have no idea what recovery is/was on it.
I bought the tablet used, and would like to fix it.
Once recovery is installed would this boot normally.
Ive been searching on here/transformer forums for a couple weeks and have thought I found the answer multiple times. I need a push in the right direction.
Tried to fix this for a while a couple months ago when ics first launched and gave up. (did the same thing when It had honeycomb on it)
edit::
the only solution I can come up with is using NVFLASH to try to restore it. Working on this right now, hopefully this is a sbk1//not working, cant seem to get the computer to recognize the device in apx mode. (win 7)

If your TF is rooted, you may want to give the RecoveryInstaller app a go.
http://forum.xda-developers.com/showthread.php?t=1346180&highlight=recovery

I forgot to add that I have tried that (tried it again just now.. twice, just incase it happened to work but it didnt.)
following these instructions:
"click the button and the Superuser app will ask for permissions. Then the tablet reboots and to enter it you have to keep the Volume - key pressed and when it the TF writes "Booting into recovery" on the screen press Volume + once"
also tried it without holding volume buttons when it reboots.
When I run it, and click the button to install recovery, it grants superuser permissions and then reboots, sticks at the eee pad screen again and it stalls at booting recovery kernal image. Anything Im missing?

Reflash a recovery image .sos and bootloader .ebt if the recovery image doesn't work.
Download any cwm flashable recovery and extract it twice to get the recovery blob out:
put the recoveryblob on your computer somewhere.
adb push C:\Location\Of\Blob\blob.blob /sdcard/
adb devices
adb shell
su
dd if=/sdcard/blob.blob of=/dev/block/mmcblk0p4 -
reboot
--
this should fix recovery.

Thanks for breaking that down! Im going to try this once I can get adb working.
Going to try another computer now. I'm beginning to wonder if the usb cord for my tf has gone bad.

You can do it on your tf too, via terminal emulator app since you can coldboot.
Download blob somewhere on tf, download term em. and run this part:
su
dd if=/Path/to/recoveryblob of=/dev/block/mmcblk0p4 -notice path/to is where you placed on Tf's INTERNAL storage.
reboot

Ok, went through it on the terminal emulator. Everything seemed to go ok, but on rebook, it still wont enter recovery (held the vol button of course) just hangs on "booting recovery kernal image"

Is BusyBox installed?

That it is, just reinstalled 1.20.. should i use a different version perhaps?

Ro.secure set to 0?
see the guide to flashing an insecure boot.img if it isn't, this may be the problem.
if you're on a rom this isn't the issue..
Try a different version of BB I suppose

simplywinter said:
Ok, went through it on the terminal emulator. Everything seemed to go ok, but on rebook, it still wont enter recovery (held the vol button of course) just hangs on "booting recovery kernal image"
Click to expand...
Click to collapse
Suggest you try method 3 in the following post.
http://forum.xda-developers.com/showthread.php?t=1622628
It does not require rooted TF. If you do everything right but still not working, you may have a faulty device.

^^ My peri runs that method, so that didn't work. :/
I think borked hardware, try NvFlash

just did this
ls - l /system/xbin/su
getprop ro.secure
returned: 0
So it is indeed set to 0.
NVflash.. well I would do that if I could get the usb connection to the computer working.. Still trying that.
Also, kokopopz
I went through method 3 on the tf itself, unfortunately it didnt work. Still trying to get adb working to try it that way.

simplywinter said:
I went through method 3 on the tf itself, unfortunately it didnt work. Still trying to get adb working to try it that way.
Click to expand...
Click to collapse
The following guide will be useful for setting up ADB.
http://forum.xda-developers.com/showthread.php?t=1071584
For the USB driver, you can try the naked driver.
http://forum.xda-developers.com/showthread.php?t=1514942&highlight=naked
Note: I am a linux user. I set up ADB on my linux box. I did not try the above myself. I just came across them. They maybe useful to a Windows user.

Windows drivers are finicky, make sure you totally uninstall and reinstall them too. Took forever to get right on my computer.

no go with windows. I still cant seem to make this work... I have ubuntu on my laptop though. Can I even do this on Ubuntu? its 11.04

You can do this with Ubuntu no drivers required, just pick up the Nvflash wheelie for linux and get yourself a reflashed ROM.
Also you can still do this on TF. I had a very similar issue that I was able to fix by using Rayman's Blobtools (you can pickup blobunpack for windows in my bootsplash screen change guide).
Download the latest stock ROM for your device, and extract the 'blob' file out of it.
Put the blob in the same folder as blobunpack.exe, then open a command prompt and cd to the directory, then run:
Code:
blobunpack blob
After that you will see that there are now many blobs, one of them is called blob.EBT, this is your bootloader blob. What you want to do is copy that to /sdcard/ on your tf via mass storage or 'adb push blob /sdcard/' (You Have to remove the .ebt extension, it's just there as an ID, so it should just be 'blob')
Once that's there flash it through the staging partition (In terminal emulator or adb shell):
Code:
su
dd if=/sdcard/blob of=/dev/block/mmcblk0p4
reboot
Then it shouldn't get stuck at the Eeepad screen anymore!
If it still does, you might have that weird problem where nothing flashed through staging partition sticks, so you'll need to run Roach2010's fix.

after trying that.. twice. It doesn't seem to stick. Roaches 2010 fix it is, searching for it right now.

If you can get adb shell access (I'm assuming yes) PERI has the fix bootloop option. Otherwise run roaches fix AFTER flashing a new recovery and EBT partition but BEFORE rebooting.

how do i run roaches fix. i Dont understand that part. I understand the rest though.

Related

Dell Logo...then black screen with backlight on and buttons lit. V'brates every 10 s.

My stock 2.2.2 streak is rooted. i downloaded honeycomb boot animation, renamed the stock b.a. and named honeycomb b.a. Bootanimation.zip. and rebooted, and it worked. a couple days later i came across something new and cool, i wanted to put the Transformers boot animation on it. i then went back to system/media and deleted honeycomb b.a. and then renamed stock bootanimation.zip, and then i downloaded the zip and put it into data/local like it says. i then tried to boot it up, it showed the dell logo, then screen goes blank with backlight on and button LED's are also on. it also vibrates every 10 seconds...what the heck is going on, hopefully i didnt brick my phone :\
...by the way, i can put it into fastboot, and i can hold vol up vol down and power, to the recovery screen?
Any help or suggestions are highly appreciated, thanks in advance everybody.
Well, personally, I would boot into StreakMod recovery (fastboot flash it on if needed), mount the data partition, run adb shell from a connected pc, and rename the original bootanimation.zip back into place.
I've had to do the above on my wildfire, where it worked perfectly, so I do know that just a misconfigured bootanimation can indeed cause issues like you are seeing.
Good luck.
ill get on that
That'll be enough to get me started, thanks
whats the command, to flash recovery.img? the whole line, i know it may differ. but an example?
and how do i run adb shell?
You can get StreakMod from http://forum.xda-developers.com/showthread.php?t=840326 and there are some instructions in the first post, as well as a download link.
The flash command is
fastboot -i 0x413c flash recovery recovery.img
To run adb you will need to have installed the Android SDK (actually, I believe that it is possible to just install the adb tool itself, but I've never tried that). You can get full instructions for that, and download links at http://developer.android.com/sdk/installing.html
It is useful to have adb installed anyway if you're going to play around with flashing stuff - it can be used to transfer files on and off your streak, log into it via the shell, watch the debugging log (it is very reassuring to watch it be busy doing something when you're booting a new rom and the screen is telling you nothing)
If you know how to use adb and fastboot but dont want the entire sdk
http://mirror2.streakdroid.com/manii/Tools/Fastboot+ADB.zip
includes fastboot + adb + streak drivers

Clockwork Recovery is Installed, Won't Load, missing recovery partition.

I'm putting this in General because this is my first time I've actually posted on XDA and I hope someone will move it to wherever it needs to be.
I've rooted my Nexus S a long time back when it was new, originally had some trouble with fastboot hanging on "waiting for device" I want to say trying PDANet fixed my problem then. I'm not foreign to the flashing/rooting process. And I know this is a long post but If you can please read it all it would be appreciated.
My Story:
>ICS was released and while Google said Nexus S would get an official update I saw some on XDA that were promising ports.
>I downloaded We Scream for Ice Cream Beta 9 and installed through Rom Manager
>About a month later I'm fed up with all the force closes and missing features the thread didn't inform me on and went to find another ICS Port.
>Downloaded and about to install through Rom Manager I'm informed that I need Clockwork (strange because I already have it) so within Rom Manager I flashed a new one.
>Install via SD Card and my phone reboots and then instead of loading recovery and doing its stuff I wait at the Bootloader screen. I try entering recovery myself and my phone restarts and again I'm at the bootloader screen.
>At the very bottom of the screen in gray lettering it says Fastboot FAILEDcommand
(As of now it displays the Google Logo with the unlock icon and hangs)
>At this point I decide I' going to flash over clockworkmod myself via adb. This should be the magic formula: via addictive tips (new user, can't include hyperlinks)
Code:
adb push c:\flash_image /sdcard/
adb push c:\recovery.img /sdcard/
adb shell
su
mount -o remount, rw /system
cp /sdcard/flash_image /system/bin
cd /system/bin
chmod 777 flash_image
flash_image recovery /sdcard/recovery.img
>Adb gives me an error similar to won't link after the mount/remount command. Also trying to cp the flash image to bin fails to work.
>I boot my phone, open Total Commander and try to copy the flash image myself to the bin folder in my root and it fails
(As of now I get error: device not found)
Then i think alright, maybe it's my drivers. I tried several different drivers from different tutorials because perhaps they are different in some slight way. >Whenever I try a new driver I can pick "adb Composite" "bootloader" or vanilla "adb interface".
>My device appears as "Android Phone" as the first entry in the Device Manager and the icon is a monitor with a small PCB chip in the corner.
>When the divers are completely uninstalled it appears in Other Devices with a yellow exclamation point.
>My understanding is that while it will automatiaclly grab the driver for USB mode, I have to force it to install the bootloader driver for when my phone is in the bootloader screen.
>And USB Debugging has been checked for everything I've done.
>Now i try to use PDANet, first I uninstall the drivers and install PDANet. Message appears saying there is already an Android Driver installed, I choose reinstall, select Samsung, pop says are you sure you want this driver, publisher cannot be confirmed? I click yes, I beleive that happens twice, it installs and then runs. It installed the vanilla "adb interface" driver.
(This is where I'm at now, the Fastboot FAILEDcommand is also gone.)
So now I'm like well there's fastboot, let me see if it recognizes it.
>Fastboot devices: nothing appears
>fastboot flash recovery recovery.img : it hangs on waiting for device.
>Same goes for other commands like OEM unlock.
All the while ROm Manager insists I have clockwork recovery verison 5.x - only it wont load and none of my PC options are recognizing the phone. So I can't flash over a different recovery image, and there;s nothing under alternate recovery in Rom Manager.
And the strangest of them all which may be Rom Manager's problem is that Super User FCs as soon as I try running it. Rom Manager states Super User gives it power at the end of the clockwork recovery flash, however, still says it's successful.
Before this entire thing my phone tried to OTA update to 2.6.7 for Google Wallet and where it would normally respond I got the Android Guy with a box and a yellow exclamation. This is also what I got when I first had some problems rooting months back before I flashed over images and roms. I figured it wouldn't update because it needed the stock recovery image and wasn't compatible updating with clockwork mod (however i think my phone has updated before with this method.)
I wouldn't mind rolling back to my stock deodexed version of Gingerbread at this point because the ROM I have now for ICS NFC and Bluetooth wont work among a slew of problems. And NFC was the major update in 2.6.7 in regards of tap to share and Wallet.
So I either need ADB and Fastboot to recognize my device to try reflashing clockwork and an Entirely new ROM remotely (if that's possible) or get clockwork mod on my phone to open.
More Details
Also when I load the recovery image and it loops back into the bootloader I get the message up top saying I don't have a boot image or recovery image. yet my phone still boots fine.
I really want my phone to work %100 again, can anyone help me?
I didn't read all you wrote, but if you're having trouble getting adb or fastbook to work correctly just use ROM Manager. Even if it says you have it installed, do it a few times. You can also go into settings and check off the format or erase recovery option before flashing.
It will eventually work. Just keep trying it.
Thanks
I know I've read things where flashing several times gets it to work. But I'm wondering if because SuperUser force closes without opening it's unable to give RomManager the permissions needed to complete the flash.
I've tried a few times ever once in a while. Still waiting, but adb will recognize my phone on my guest login but still no fastboot.
What rom you on? Have you tried going into app manager and then clearing data for superuser? Try that and then reflash the recovery a few times from rom manager.
If you're using CM9 alpha 11 or any of the builds by Koush, and superuser FC's from fresh flash. Clear the data, use root explorer or another app that has root access (it will prompt you for root access even if superuser UI won't open) then you can go into /system/app/ and delete or rename superuser.apk.
Once that is done, get the latest one from the market. Soon as it installs, clear the old data from the previous one by using app manager again. Then your superuser app should be working normally.
What's your phone model? (I guess it's I9020T)
When you boot into bootloader, does the fastboot devices command see the device properly?
You should use fastboot to flash your recovery. You probably have driver issues. Check the rooting guide at nexusshacks.com.
Sent from my Nexus S using XDA App
Fixed
Thanks to everyone and heir suggestions.
Eventually I downloaded another set of Fastboot and ADB registered with my phone and I was able to flash a new ClockworkRecoveryMod.
My only explanation is that the two tools where in the same folder this time - that was the only part that was different.
However ROM manager will still tell me I do not have Clockwork on my phone and when it 'flashed' it over it actually breaks my recovery partition all over again.
Thank god for ADB and Fastboot.

[Q] Stuck in CWM, factory cable help

I tried to prevent my phone from updating to 6.2.1 by changing /system/etc/otacerts.zip to /system/etc/otacerts.zip.bak. When I did this it rebooted into CWM and looks for update.zip (i renamed it b/c i didn't need it). now it loops because I can't choose to anything other than install update.zip
ADB won't find the device so I can't rename the file or push a new one. I built a factory cable which appears to work but I still can't see my KF. When I run lsusb it shows 1949:0006 Lab126 as the device.
Any ideas?
using Ubuntu 10.10
<update>
I can adb shell now. however, no adb functions seem to work. Anyone know how I can keep cwm from hi-jacking my boot? I would gladly go stock to get going again.

[Q] Super Ultra Brick (WITH VIDEO)

UPDATE 3: I've got it back to as stock as I can get it. I think I'm going to just return it and get a new one. Thank you all for your help.
UPDATE 2: As of right now, I'd like to completely remove FFF from the device, but I can only use fastboot to do it. I have absolutely no adb access. Is there a way?
UPDATE: Here is a video showing what is happening to my KF: http://www.youtube.com/watch?v=MH6oUg1NmC0
I hate to start another thread about boot loops/bricking, but I'm not sure what's going on with my fire.
I had CM7 installed successfully since the day after Christmas. This morning I woke up and my Fire was being really sluggish, so I rebooted it (I did not select reboot into recovery).
After it powered on, I was stuck at the CM7 boot screen (with the skateboarding android). I let it sit, but no luck. I went into TWRP to try and restore the backup I made of the stock rom. It looked successful, but when I rebooted I was stuck at the Kindle Fire boot screen.
Next, I tried wiping the device and re-installing CM7, but I received an error (something along the lines of E:Error unable to find /tmp/sideload/blahblah).
So I again restored my backup of the stock rom. Now when I power on my Fire I see the yellow triangle, then the kindle fire logo, yellow triangle, kindle fire logo, and it just keeps repeating. The problem is I am unable to connect to adb because the PC only seems to recognize the adb device for a few seconds after the yellow triangle, which does not give me enough time to fix the problem.
Any ideas?
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
b63 said:
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
Click to expand...
Click to collapse
Recovery shows my battery level to be at 53%. I've got it on the charger now, but I have a feeling there is something else going on.
Also, I am unable to mount my Fire's SD to my computer in recovery. It looks like it is working, but my computer never acknowledges it.
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
b63 said:
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
Click to expand...
Click to collapse
Thanks for the reply. Is adb required to get into fastboot? The problem is that I am unable to get into adb because my computer only sees the Fire for about 1 second. When I go into device manager, I don't see it at all.
EDIT: Yeah, I see the mount in TWRP, but it does not do anything when I select it.
Hi Im a beginner but Id like to try to help :
In case you become desperate ignore twrp's battery display and try wall charger.
Anorher idea id have is to shut down throughr twrp and start up then instead of rebooting.
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
skourg3 said:
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
Click to expand...
Click to collapse
So this time it looks like the installation worked in TWRP, but after reboot now I'm stuck at the CM7 boot screen. This is at least some progress, so when I get home I'll see what I can do.
Sent via my internet connected mobile cellular telephone.
Well, the battery is definitely not the issue. I've been trying to get fastboot, but the problem is the fact that I can not get adb. Has anyone else had issues with getting adb? I've already tried to install the drivers, and that doesn't work.
EDIT: I've tried issuing "adb devices" from the command prompt repeatedly as soon as I hear the ding until it disconnects a second later, but still I have had no luck.
Also, I found this thread in which someone else appears to have had a similar issue to mine.
[Q] New kind of unfixable Super Brick?
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
b63 said:
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
Click to expand...
Click to collapse
I can not seem to get fastboot to work either. Does fastboot rely on adb? Or do you just run the .exe file? I tried to run it, and nothing happened.
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
Just wanted to let you know I updated the OP with a video showing what is happening to my KF.
Haven't tried that particular rom yet, but I have wiped data and cache and attempted to re-install CM7.
great idea with the video !!!
b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
OK, so I restored my original rooted kindle rom, but I still can't get into fastboot because of the problem I showed in the video. It is doing exactly the same thing, just instead of the CM7 boot screen, it is the Kindle Fire boot screen.
Is is possible to get into fastboot without the computer? Can anyone think of a reason why I would not be able to mount my device in TWRP?
I just want to understand something about fastboot... can you upload and flash roms with it? Or can you only get TWRP / FFF with it? I ask because I already have them, and I still can't do anything (mount from inside TWRP doesn't work). Thanks!
Sent via my internet connected mobile cellular telephone.
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
b63 said:
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
Click to expand...
Click to collapse
Cool. I just ordered one of SkOrPn's cables, so once I get it I'll be sure to give an update. Thanks for all the help so far!
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
foxdog66 said:
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
Click to expand...
Click to collapse
Yep, I've used adb successfully, and it is set up as an environmental variable. I actually installed FFF and TWRP with the KFU. Problem is I think something else is botched; perhaps it is TWRP itself, since I am unable to mount from TWRP. I'll try again when I get home.
Sent via my internet connected mobile cellular telephone.

[Q] installation of CM11 went sour, now in boot loop - any ideas?

I tried installing CM with CM Installer for MAC ... until it got stuck in bootloop.
Using adb I pushed image, still bootloop.
Reset to factory, cleared partition, flushed dalvik cache, all the same.
adb commands seem to work since I can make the phone reset and so forth.
details:
mako 16 GB
HW version - rev_11
bootloader version MAKOZ30d
baseband M9615A-CEFWMAZM02.0.1701.02
signing - production
secure boot - enabled
lock state - unlocked
recovery mode is CWM v6.0.4.7 (assuming it got installed by the CM installer for MAC)
tried by hand to resuscitate with cm-11-20141008-SNAPSHOT-M11-mako.zip and cm-11-20141107-NIGHTLY-mako.zip using sideload to no avail - still bootloops despite numerous factory resets and cache partition wipes.
any ideas please?
thanks
This is what i use: http://forum.xda-developers.com/nex...olkit-wugs-nexus-root-toolkit-v1-8-2-t2015469
Has multiple options for going back to stock, rooting, and lots of other things.
TreatnHerRight said:
This is what i use: http://forum.xda-developers.com/nex...olkit-wugs-nexus-root-toolkit-v1-8-2-t2015469
Has multiple options for going back to stock, rooting, and lots of other things.
Click to expand...
Click to collapse
That looks great ... and uses Windows only
I can boot Windows under VMWare Fusion on my MAC however not 100% sure if that would work within that environment as I need to do some USB passthrough.
Thanks for the pointer though.
ilmoomino said:
I tried installing CM with CM Installer for MAC ... until it got stuck in bootloop.
Using adb I pushed image, still bootloop.
Reset to factory, cleared partition, flushed dalvik cache, all the same.
adb commands seem to work since I can make the phone reset and so forth.
details:
mako 16 GB
HW version - rev_11
bootloader version MAKOZ30d
baseband M9615A-CEFWMAZM02.0.1701.02
signing - production
secure boot - enabled
lock state - unlocked
recovery mode is CWM v6.0.4.7 (assuming it got installed by the CM installer for MAC)
tried by hand to resuscitate with cm-11-20141008-SNAPSHOT-M11-mako.zip and cm-11-20141107-NIGHTLY-mako.zip using sideload to no avail - still bootloops despite numerous factory resets and cache partition wipes.
any ideas please?
thanks
Click to expand...
Click to collapse
Honestly, when I get into these situations I just flash the stock images and use that as a starting point. (I'm guessing your recovery is still working fine, given what you've said, so you can pull that out of the zip it sends so it doesn't write over it)
My approach, however, is usually, "damn, I messed up, let's go back to a known good point and try again" though, so keep that in mind if you decide to follow this path.
nic0lette said:
Honestly, when I get into these situations I just flash the stock images and use that as a starting point. (I'm guessing your recovery is still working fine, given what you've said, so you can pull that out of the zip it sends so it doesn't write over it)
My approach, however, is usually, "damn, I messed up, let's go back to a known good point and try again" though, so keep that in mind if you decide to follow this path.
Click to expand...
Click to collapse
That didn't work either (the restore to stock).
The USB passthrough on VMWare fusion works like a charm, ADB sees the device, passing commands on from the Windows application, rebooting and so forth.
However once it goes through the repair process at some point I get some strange cyan screen with white and lilac blinking lines and the program keeps saying "waiting for your device (or phone, or whatever" ...
Losing the will to live.
ilmoomino said:
That didn't work either (the restore to stock).
The USB passthrough on VMWare fusion works like a charm, ADB sees the device, passing commands on from the Windows application, rebooting and so forth.
However once it goes through the repair process at some point I get some strange cyan screen with white and lilac blinking lines and the program keeps saying "waiting for your device (or phone, or whatever" ...
Losing the will to live.
Click to expand...
Click to collapse
Why are you using VMWare? You should be able to download the tools you need for WIndows, Mac, or Linux.
Go and grab the Android SDK and install the "Android SDK Platoform-tools" and download 4.4.4 image from Google.
Once you have those two things, unzip the factory image and do "adb reboot bootloader" and then run "sh flash-all.sh" from a command prompt. This will use fastboot to write an img file to the partitions on the device, so if you can't run the SDK tools, for whatever reason, use fastboot to run the commands in the file. (That is, don't use recovery and adb sideload, do it through fastboot)
The -w option will wipe your data, so if you want you can try and run the last line (fastboot -w update image-occam-ktu84p.zip) without the "-w", but if it doesn't work then I'd try it again with it.
If you can boot into the bootloader and recovery then your device isn't dead. Worst case you have to go to a friend's place and flash it there.
nic0lette said:
Why are you using VMWare? You should be able to download the tools you need for WIndows, Mac, or Linux.
Go and grab the Android SDK and install the "Android SDK Platoform-tools" and download 4.4.4 image from Google.
Once you have those two things, unzip the factory image and do "adb reboot bootloader" and then run "sh flash-all.sh" from a command prompt. This will use fastboot to write an img file to the partitions on the device, so if you can't run the SDK tools, for whatever reason, use fastboot to run the commands in the file. (That is, don't use recovery and adb sideload, do it through fastboot)
The -w option will wipe your data, so if you want you can try and run the last line (fastboot -w update image-occam-ktu84p.zip) without the "-w", but if it doesn't work then I'd try it again with it.
If you can boot into the bootloader and recovery then your device isn't dead. Worst case you have to go to a friend's place and flash it there.
Click to expand...
Click to collapse
I am using VMWare Fusion since my Windows work laptop is dead (courtesy of lost charger).
So I must use my Mac (which used the CM installer where things went sour).
Doubt it is a problem since I can get ADB to work.
I have already dowloaded the Android SDK Platoform-tools and stock 4.4.4.
I used ADB on MAC, but after I copy the ROM the phone does some scroll-bar progress, then I clear partitions/factory erase/cache ... and boot loop again.
I will follow your advice and use the described process.
You are right - as long as I have bootloader I am safe.
Might go and buy Moto X+1 or Sony X3 ... as I want to go 4G but thought might use the N4 for another few months.
thanks
following instructions from nic0lette I have now my phone back to normal ...
will try CM using the same instructions ... well, using the flash-all.sh as a base script
thanks (and "thanked")

Categories

Resources