[Q] loading MAGLDR 1.13 - HD2 Android Q&A, Help & Troubleshooting and Genera

after loading MAGLDR 1.13
hangs on GO, Go,Go
more is not loaded
installed
MDJ_Revolution_HD_v._2.2_NAND and MDJ Revolution HD v.2.3 Lite [A2SD+] [RMNET] [kernel MDJ S10.3 OC] (shaman91 build)

5ch71rl13 said:
after loading MAGLDR 1.13
hangs on GO, Go,Go
more is not loaded
installed
MDJ_Revolution_HD_v._2.2_NAND and MDJ Revolution HD v.2.3 Lite [A2SD+] [RMNET] [kernel MDJ S10.3 OC] (shaman91 build)
Click to expand...
Click to collapse
No sense in this thread, little more detail would come in handy for the ones who are willing to help and experienced the same problem but as of now that post looks like junk

Related

HTC + FROYO + BP E400 = Won't Boot

I have had Froyo running on my HTC HD2 for a few weeks now without many problems.
I bought an Extended battery due to general poor battery life, unfortunately the phone boots to windows but when I try to boot into Froyo it starts up but then within about 5 seconds reboots back into windows again.
It seems to try to reset the SD card?
Put the original battery back in and all is fine.
Any thoughts are appreciated
Radio Version:
2.10.50.08_2
ROM Version:
Elegance MaxSense 1.0 Final WWE
[BUILD] [18.08.2010] [darkstone HD2Froyo V2.1] [kernel: darkstone 2.6.32.9 #36]
I know there's been some issues with EBs and some builds. The working builds mention support for EBs in the kernel, so look for those.
falcaogj said:
I have had Froyo running on my HTC HD2 for a few weeks now without many problems.
I bought an Extended battery due to general poor battery life, unfortunately the phone boots to windows but when I try to boot into Froyo it starts up but then within about 5 seconds reboots back into windows again.
It seems to try to reset the SD card?
Put the original battery back in and all is fine.
Any thoughts are appreciated
Radio Version:
2.10.50.08_2
ROM Version:
Elegance MaxSense 1.0 Final WWE
[BUILD] [18.08.2010] [darkstone HD2Froyo V2.1] [kernel: darkstone 2.6.32.9 #36]
Click to expand...
Click to collapse
Search for michyprima r11 kernal. Replace the zimage and tun.ko and bcm*.ko in ur android build. U should then have support for extended battery's.
For ur android build you will need to use build_n once uv downloaded the files.
Edit....here's the thread http://forum.xda-developers.com/showthread.php?t=756513
Sent from my Htcclay's SuperHD2 using XDA App
thx guys for the replies Ill give it a go
cheers

Best combination of WM+Kernel+Android+Radio ?

Hi guys,
I would like to rear from you what is the recommended combination of Windows Mobile + Android + Kernel + Radio and others.
I have been testing some combinations and all of then has some issues. Up to now the most stable one for my T-mobile HD2 is:
- WWE|TMO Leo|¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21916 | 21283 |`·.¸¸.·´¯ Sense 2018 ¯)
http://forum.xda-developers.com/showthread.php?t=654504
- [BUILD][21.09.2010][mattc Leo + Froyo w/Sense 1.8][Kernel: 2.6.32.15 #5]
http://forum.xda-developers.com/showthread.php?t=736545
- Stock T-Mobile Radio
I tried to swap mattc Froyo with Mdeejay eVo Sense v. 2.3 rEVOlution (http://forum.xda-developers.com/showthread.php?t=790374) but I the sleep of death problem happens every 10 minutes. So I put back mattc Froyo.
Any sugestions on combinations?
There really is no "best" combination. You just have to find the one that works best for you. If that combo you have going on there works great for you, then stick with it.
I am running chuck dexter Rom. 3.14 radio. Mdjays evo build everything is working really well
Sent from my HTC HD2 using XDA App
I like elegance Rom (newest) froyostone 3.2 nd 2.12 radio
Sent from my HTC Desire using XDA App

[Q] Any Extended Battery Supported Android NAND?

Try several nand rom, but most of them can be boot and try the following ROM
NexusHD2-Froyo V1.9a NAND: http://forum.xda-developers.com/showthread.php?t=895059
Jaws MIUI 12/18 NAND: http://forum.xda-developers.com/showthread.php?t=897898
Jaws MIUI 12/31 NAND: http://forum.xda-developers.com/showthread.php?t=894367
but batterydrainage is so quick, and it won't last for 12hr
Is there any other nand ROm which has good support in extended battery?
Try this out [16.MAR][CWM] NexusHD2-Gingerbread V2.4 [Android2.3.3][Kernel: tytung_r7]
Supported the official HTC extended battery due to new tytung_r7 kernel.
Click to expand...
Click to collapse

black screen when i call

hello,
i ve a problem with my htc hd2 with nand android. When i call someone the screen gone black and it stay black and i have to remove the battery...
I have tested a lot of builds and i have always this problems on nand android...
I have tried on windows mobile 6.5 builds and i don't have this problems... so it's not a hardware problems...
I have changed the rom radio but it's doesn't change...
What can i do to resolve this probleme...
Thanks
What are the ROMs have you tried? Have you tried an AOSP ROM like NexusHD2 or Typhoon CM7? Is yours a T-Mobile HD2 or EU/ WWE?
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
ph03n!x said:
What are the ROMs have you tried? Have you tried an AOSP ROM like NexusHD2 or Typhoon CM7? Is yours a T-Mobile HD2 or EU/ WWE?
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
Click to expand...
Click to collapse
find another (phone.apk) from another rom,pyramid rom v4.0 is ur best safest option,works for tmous and eu hd2

[Q] do i need kernel in jelly bean ???

hello sirs
i have installed the jelly bean to my HD2 eu on DataOnEXT in this thread.
and i want to ask.
do i have to OR do you advise me to install the kernel ?? as shown in the tytung's signature ?
tytung said:
Device: HTC HD2 (LEO512)
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR v1.13 or cLK v1.4.0.1/v1.5
Recovery: ClockworkMod Recovery 5.0.2.6
My work for Android on HD2:
Tool: NativeSD Touch Recovery v1.0
ROM: NexusHD2-JellyBean-CM10 V1.3a (Android 4.1.2) | Kernel: tytung_jellybean_r1
ROM: NexusHD2-ICS-CM9-HWA V2.8  (Android 4.0.4) | Kernel: tytung_ics_r3.6
ROM: NexusHD2-Gingerbread V3.3a  (Android 2.3.7) | Kernel: tytung_gb_r16
ROM: NexusHD2-Froyo V1.9G      (Android 2.2.2) | Kernel: tytung_r12_oldcam
Libs: GPS Libraries v2.1 with AGPS support for HD2
App: Leo AGPS Injector v0.5
Solution: T-Mobile WiFi Calling for HD2
Click to expand...
Click to collapse
kedito said:
hello sirs
i have installed the jelly bean to my HD2 eu on DataOnEXT in this thread.
and i want to ask.
do i have to OR do you advise me to install the kernel ?? as shown in the tytung's signature ?
Click to expand...
Click to collapse
No - it is already included.
---
With proper diet, rest, and exercise a healthy body will last you a lifetime... (via Tapatalk)
thanks a lot. i am a beginner on this ROM installing. i m still learning.
there are lot of things you can flash to your HD2, you can even dual boot from WP7.8 & Android, just keep on reading the threads & do a specific search on what you want to do.
ok thanks to everybody. i have already read a lot. and now i am using NexusHD2-JellyBean-4.1.2-CM10 V1.3a ( NativeSD )
4 GB EXT4 + 4 GB Fat32 (my sd card is Silicon-Power 8 GB Class 10)
everythings is alright for now.
thanks to everybody.

Categories

Resources