Database Users

[Q] I need some expertise

Hello all good people. My screen suddenly stoped working.. hardware buttons works fine but thats not enough on this phone.
I still have guaranty fortunately But with hardspl, CWM and a android nandrom installed i dont dear to send it in.. is there a way to remove everything? I mean so it will pass the most strickted serviceguy..
Hope anybody can help me and yes.. i've searched a lot for this solution with no luck :/

J.R.E said:
Hello all good people. My screen suddenly stoped working.. hardware buttons works fine but thats not enough on this phone.
I still have guaranty fortunately But with hardspl, CWM and a android nandrom installed i dont dear to send it in.. is there a way to remove everything? I mean so it will pass the most strickted serviceguy..
Hope anybody can help me and yes.. i've searched a lot for this solution with no luck :/
Click to expand...
Click to collapse
Download the stock Windows Mobile ROM for your particular device (TMOUS, Telestra, etc.) and rename the ruu_signed.nbh to LEO_IMG.nbh and put it on an sd card of 4gb or less. Put the sd card in your HD2 and power it on while holding the volume down (vol -) button the entire time it's starting until you enter into bootloader (tri-color screen). The leo_img.nbh should be detected shortly and then you will be prompted to press a certain button to flash the new ROM. Once it's done, you will have stock WM 6.5 and the stock bootloader back on your phone, ready to ship off for repairs.
Just make sure and find the correct stock ROM for your device, or you will be sorry. If you flash a EU ROM to a TMOUS HD2 for example, it will brick the device. Look in the HD2 Windows Mobile 6.5 stickies and you will surely find a link to stock ROMs to download.

Thank you Mr. huggs u made my night

No problem, glad I could help

[Q] Help on fixing hd2 that wont boot up

Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .

If it doesn't install, and nothing installs, then you need to take it to repair I guess.

I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.

frequency1 said:
I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.
Click to expand...
Click to collapse
why dont you try sd card method for flashing your rom !1! you can pm me if you need further help

Do you mean that it can't get to the boot loader screen (rainbow) or that trying to install a ROM from there didn't work? You might want to flash the original HSPL too, just to check.

What I mean is that everytime I boot up the hd2 it stays stuck on the splash screen. It doesn't even show the rom information in red at the bottom left corner of the screen. But I can boot to the tri color menu though. I have tried to install the tmous official rom by plugging the USB when I'm in the tri color menu and it always stays stuck at 9%. So is there way to fix this or am I screwed.
Sent from my Android Powered HD2 using XDA App

Try the sd-card recovery instead of the USB one.
http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
After that, even if it fails, it shows only SPL in the tri-color screen then you are set to claim warranty.

frequency1 said:
Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .
Click to expand...
Click to collapse
Well my bro... i think thats nand problems or heating issues ... does flashing rom goes all ok or it stops during flashing ? if stops than check if you phone is hot - hotter than normal.
Try this : Take out battery, memory card, sim card and put you phone in the fridge for about 5-10 min ( dont worry tried many times... no harm ) meanwhile prepare your sd card to flash rom with sd card method ... to do that extract Ruu rom - stock one - download with hd2 serial nr ( winrar, 7zip etc) find Ruu_Signed.nbh rename it to LEOIMG.nbh than copy to sd card ( format you sd card fat32 and make sure it works ... 2gb will work ) take phone out from fridge put sd card & battery into phone power one phone while holding volume down key ( go into tricolor screen - bootloader) and follow procedure in phone... i hope everything goes well and you fix you phone... but if still no success than flash android or wp7 ( if you have warranty flash stock SPL and return phone).
best regards from me

[Q] HD2 touchscreen not responding aftef screen lock

Hi,
i`ve got a problem with my touchscreen, after installing SD card distribution of Android, few restarts later my touchscreen stpped to respond every time when my device is locked, and i have to restart it.
I tried to flash new rom - nothing happend
H-E-L-P !

remove sd card delete the partitions and format - use Easeus free edition for this
Then boot the phone - reun task 29 from your pc then reread the flashing instructions for the rom of your choice and try again - ensure the rom supports your version og HD2 whatever that may be

All done, and doesn`t work. I`m wonderig if is possible, that is malfunction of touchscreen, because it have been changed after it was broken.

i'm having the same issue. after it goes into its first lock screen the touch screen input doesn't work. i've flashed the ROM and also task29 the sucker. i've reverted back to stock ROM too. I'm not running android or even try to install from SD.

Bump..!
Anybody got a solution for this..?
I have a HD2 with android on it.. nand version.. so it runs without sd card..
The phone works fine.. but when you lock it.. the screen doesnt respond anymore.. its running miui at the moment, so i can unlock the lockscreen.. but still the screen doesnt respond..
i see more people having this issues, so i hope to find a solution..
keep on searching..!

So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows

gomez.pl said:
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
Click to expand...
Click to collapse
Sure it's hardware: replacing touchscreen is your best choice!

But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..

thommy86 said:
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
Click to expand...
Click to collapse
It's a wellknown (hardware) problem for HD2, not related to software(android/wm/wp/whatever).

SO my LEO came back from service, there is a part list that they changed:
- 54h20178-00M pre-assy key, key FPC, UF-KS, w/o Reg
- 74H01549-00M Chassis Pre-assy, black, stainless steel, MLRB81
- 76H04078-00M tape, FPC connector, kapton, MLRB81
- 83H00294-01 change 83H00233-01, 83H00294-03, 62H00065-B1M Sub-assy to 82H
maybe You need do the same...

Okay, so i just bought my 6th HD2, and this one got the lockscreen problem as well. If i lock the screen using the red power button and try to wake it up with the same red power button i found out that it doesn't work. I tried everything but i think i found a sort of workaround for the touchscreen problem.
1. Lock the screen as you normally do, with the red power button.
2. Wait at least more then 6 seconds with the screen off.
3. Now push the VOLUME UP button to make the device wake up.
4. Profit!
5. If it doesn't work, go back to 1 and try again.
I found out that if it works 1 time it will work multiple times in a row.
I'm on NAND but i think it works on SD aswell.
Please post your reactions to this.

[HELP] can't lunch android on wm6.5

Hi ,
i cant lunch android "AmeriCanAndroid" on my HTC HD2
i dont know why cuz it was working but suddenly after a restart it lagged then after another restart it doesn't work !
im using wm 6.5 \ Energy GTX rom
and this is the message that appears to me
the message says ;
HaRET boot
shutting down hardware
Turning of MNU
( and other part of the message i couldn't read but i was talking about the error code and stuff like that )
Click to expand...
Click to collapse
i tried to change the rom but still the same
i removed the android folder and exchange it with the original file and still the same problem
so any ideas ?

After this screen, the text fades out and your phone remains on a black screen right?
I remember this very old problem when first android sd builds were published
Upgrade your radio, make sure you don't brick your device (a.k.a search & read before attempting to do anything)

Marvlesz said:
After this screen, the text fades out and your phone remains on a black screen right?
I remember this very old problem when first android sd builds were published
Upgrade your radio, make sure you don't brick your device (a.k.a search & read before attempting to do anything)
Click to expand...
Click to collapse
i upgraded the radio and its working now ,
thank u very much brother

Getting back from froyo to wm 6.5, pls help!!

Hello all, i need some help. I bought used HTC HD2, phone was old for about 2 weeks in perfect condition but he had 2.2 froyo installed on micro sd. Phone is not working fine and i dont like android to much so i want to have wm 6.5 as stock has too. I ha t mobile for operator but im almost positive that phone is bought in EU Pls help me to get off anroid and get the phone back to stock so i can have 6.5 wm os. I tryed everything im just not good enough with terms such as radio,SPL ect. so im noob at this. Pls help me somehow.Sorry for my bad english. Thank you

Hi there, I don't know fully how to do this myself (as I personally love android OS ) but I've found a couple of links that should help you out.
http://androidforums.com/htc-leo-hd...oid-2-2-reinstall-windows-mobile-6-5-3-a.html
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
The ROM is basically the 'operating system' the phone uses, a radio controls how its hardware connects to things and as for SPL I don't know either
If you didn't install android on it yourself you might need to install a couple of things on your PC - the links will tell you what you need. Good luck!

simec2404 said:
Hello all, i need some help. I bought used HTC HD2, phone was old for about 2 weeks in perfect condition but he had 2.2 froyo installed on micro sd. Phone is not working fine and i dont like android to much so i want to have wm 6.5 as stock has too. I ha t mobile for operator but im almost positive that phone is bought in EU Pls help me to get off anroid and get the phone back to stock so i can have 6.5 wm os. I tryed everything im just not good enough with terms such as radio,SPL ect. so im noob at this. Pls help me somehow.Sorry for my bad english. Thank you
Click to expand...
Click to collapse
If he had, as you said, installed Android on the SD card, then just reboot.

Nigeldg said:
If he had, as you said, installed Android on the SD card, then just reboot.
Click to expand...
Click to collapse
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/

simec2404 said:
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
Click to expand...
Click to collapse
What kind of SD are U using? Leoimg-thingy is only working on SD's up to 4gb...larger SD's will not be recognized in tricolor loader.

simec2404 said:
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
Click to expand...
Click to collapse
Nah because you said your friend installed Froyo on the SD, I assumed it was a dual boot with WinMo. What's the OS on the NAND? WinMo, WP7 or Android? And as icke pointed out, you'll need a small SD. If you're lucky, your friend may have the original 2GB SD which came with the phone, so you could try again using that one instead.
If the smaller SD doesn't work, are you sure that you're doing everything correctly? You do have leoimg.nbh on the root of your SD card, right?

Nigeldg said:
Nah because you said your friend installed Froyo on the SD, I assumed it was a dual boot with WinMo. What's the OS on the NAND? WinMo, WP7 or Android? And as icke pointed out, you'll need a small SD. If you're lucky, your friend may have the original 2GB SD which came with the phone, so you could try again using that one instead.
If the smaller SD doesn't work, are you sure that you're doing everything correctly? You do have leoimg.nbh on the root of your SD card, right?
Click to expand...
Click to collapse
Android is on the phone and i want WM6.5, i want the original mobile setup.
Now i dont have leoimg.nbh anywhere i think,i did screenshot but i cant post outside links yet cause im fresh member.
I just want to know how can i have back WM6.5 on my htc hd2.
I had problems with downloading my own stock rom via my serial number from htc page so i tryed whit 10 others from other forums but neither one had worked.