Related
Hi,
I would like to request the help of the Rooting Gurus
I have an S2 and the info of the phone is the following:
PDA: I9100XWKG1
PHONE: I9100XXKG1
CSC: I9100XEFKG2
From the thread in this forum I found that in order to root the phone I have to download the following firmware version:
XWKG1
Firmware info
PDA:XWKG1
PHONE: XXKG1
Date: 05/07/2011
Android 2.3.3
XEF (France): link1
TUR (Turkey): link2
ITV (Italy): link3
XWKG1 Stock Kernel:link4
From what I understand I have to download the first one (XEF France) since it matches my CSC code and also the XWKG1 Stock Kernel.
I use the custom firmware first with Odin and then the stock kernel in order to remove the yellow triangle.
This firmware though is version 2.3.3 and my problem is what do I do if I want to upgrade it (not from Kies)
From samfirmware I see that there are firmwares with version 2.3.4 and 2.3.5 but not sure which one I can use without causing a problem to the phone
In the firmware table for example it has the following two versions:
Europe Firmware .PIT Android Date CSC
I9100XXKG2 EXT4.PIT 2.3.4 2011 July 12 MULTI-CSC-OXAKG2
And
I9100XXKI3 EXT4.PIT 2.3.5 2011 September 15 CSC-OXAKI3
From the letter code (XX) in one of the threads here I way that XX letter code means:
XX---> Austria, Belgium, France, Germany, Hungary, United Kingdom
1) Can I use any of the above firmwares even though it seems that the CSC code doesn’t match?
2) How can I change the CSC code?
Thank you in advance for your help
In short.....yes you can flash them.safely.
I am from Australia and use the UK csc.
Alternatively, you can flash the firmwares you like then flash just the csc you want after that over it.
If you have cwm recovery I would recommend doing a backup just in case you want to go back. Or just use Odin if you already have your stock firmware.
Sent from my GT-I9100 using XDA Premium App
Dionisisf said:
Hi,
I would like to request the help of the Rooting Gurus
I have an S2 and the info of the phone is the following:
PDA: I9100XWKG1
PHONE: I9100XXKG1
CSC: I9100XEFKG2
From the thread in this forum I found that in order to root the phone I have to download the following firmware version:
XWKG1
Firmware info
PDA:XWKG1
PHONE: XXKG1
Date: 05/07/2011
Android 2.3.3
XEF (France): link1
TUR (Turkey): link2
ITV (Italy): link3
XWKG1 Stock Kernel:link4
From what I understand I have to download the first one (XEF France) since it matches my CSC code and also the XWKG1 Stock Kernel.
I use the custom firmware first with Odin and then the stock kernel in order to remove the yellow triangle.
This firmware though is version 2.3.3 and my problem is what do I do if I want to upgrade it (not from Kies)
From samfirmware I see that there are firmwares with version 2.3.4 and 2.3.5 but not sure which one I can use without causing a problem to the phone
In the firmware table for example it has the following two versions:
Europe Firmware .PIT Android Date CSC
I9100XXKG2 EXT4.PIT 2.3.4 2011 July 12 MULTI-CSC-OXAKG2
And
I9100XXKI3 EXT4.PIT 2.3.5 2011 September 15 CSC-OXAKI3
From the letter code (XX) in one of the threads here I way that XX letter code means:
XX---> Austria, Belgium, France, Germany, Hungary, United Kingdom
1) Can I use any of the above firmwares even though it seems that the CSC code doesn’t match?
2) How can I change the CSC code?
Thank you in advance for your help
Click to expand...
Click to collapse
You may find these interesting reading
For firmware, Intratech is the king of official, up to date firmware.
http://forum.xda-developers.com/showthread.php?t=1075278
For rooting, Chainfire's CF-Root is one of the easier ways to go about it, the thread is here.
http://forum.xda-developers.com/showthread.php?t=1103399
I was a total novice but by reading the the instructions over and over and following them to the letter it's not as difficult and complicated as some like to make out.
tacgls said:
You may find these interesting reading
For firmware, Intratech is the king of official, up to date firmware.
http://forum.xda-developers.com/showthread.php?t=1075278
For rooting, Chainfire's CF-Root is one of the easier ways to go about it, the thread is here.
http://forum.xda-developers.com/showthread.php?t=1103399
I was a total novice but by reading the the instructions over and over and following them to the letter it's not as difficult and complicated as some like to make out.
Click to expand...
Click to collapse
Good advice. These two thread offer a lot of good information.
Hi!, Someone can give me the Telcel's Mexican Stock ROM?, This are the details:
PDA: S5360LUMKI1
PHONE: S5360LUHKI1
CSC: S5360LTCEKI1
I forget to do a backup and this details are from a Latam Comunity.
Thanks for all.
Charlie.
CharlieBros said:
Hi!, Someone can give me the Telcel's Mexican Stock ROM?, This are the details:
PDA: S5360LUMKI1
PHONE: S5360LUHKI1
CSC: S5360LTCEKI1
I forget to do a backup and this details are from a Latam Comunity.
Thanks for all.
Charlie.
Click to expand...
Click to collapse
in the queue...
Thank's a lot.
Charlie
Doky73 said:
in the queue...
Click to expand...
Click to collapse
I have still this stock rom in my sons device. If you tell me how to dump it i will post it.
bundle ready for test:
https://hotfile.com/dl/150017338/8ba4499/S5360L_UMKJ2_TCEKJ2_UHKJ2_by_Doky.zip.html
Unofficial Odin firmware package for Samsung GT-S5360
PDA S5360LUMKJ2
CSC S5360LTCEKJ2
MODEM S5360LUHKJ2
Included regions:
TCE only - Mexico, TELCEL GSM
need a s5360LUHKI6 multifile
need a s5360LUHKI6 multifile
reupload files
Can you reupload this files? Because Hotfile was closed. thanks
I am currently implementing an alternate method of Rooting which I have found to be successful by means of Pre-Rooting the factoryfs.img file.
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Yellow Triangle will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions flashed to your device.
What Root Package is used in these ROMs?
- Busybox 1.20.2 (Newer ROMs)
- SuperSU 1.04 (Newer ROMs)
Note: Previously released ROMs may have an older Busybox and SuperSU package installed.
Please Note: This Root Method does not include clockworkmod Recovery. This is for people who only require Root Permissions.
If you do require clockworkmod Recovery, you will need to flash a CF-Root Kernel or other Root Modified Kernel. Old SBL is included in Modified Stock Packages so USB Jig may still be used.
New and Old SBL files are attached at the bottom of the second post in this thread should you require them.
Click to expand...
Click to collapse
As this is a time consuming process, ROMs will be added over time although some ROMs have been added already so keep checking back for updates.
If theres a ROM Package you would like uploaded then please feel free to drop me a PM.
Current Pre-Rooted Stock Firmwares:
If you find my Pre-Rooted Firmwares useful then please consider a small donation.
Just UnZip and Flash the '.tar.md5' File in Odin.
SBL Files are included at the bottom of this thread if you need them for any reason.
Password (All Packages): [email protected]
Click to expand...
Click to collapse
Note: If you are coming from a Custom ROM, remember to Wipe Data and Cache Partitions before flashing to avoid Boot Loops.
Modified Stock Packages (Unbranded Only!):
(Modifications: Newest PDA Image and Modem and Pre-Rooted.)
Click to expand...
Click to collapse
Firmware: I9100XWLPY (4.0.4) (Unbranded UK)
PDA: XWLPY
PHONE: XXLQ6
CSC: XEULPA
Link: Download (Dev-Host)
Firmware: I9100XWLPX (4.0.4) (Unbranded UK)
PDA: XWLPX
PHONE: XXLQ6
CSC: XEULPA
Link: Download (Dev-Host)
Firmware: I9100XWLPM (4.0.4) (Unbranded UK)
PDA: XWLPM
PHONE: XXLQ6
CSC: XEULP5
Link: Download (Dev-Host)
Firmware: I9100XWLPG (Unbranded UK)
PDA: XWLPG
PHONE: XXLPX
CSC: XEULP5
Link: Download (Dev-Host)
Firmware: I9100XWLPD (Unbranded UK)
PDA: XWLPD
PHONE: XXLPW
CSC: XEULP5
Link: Download (Dev-Host)
Firmware: I9100XWLP8 (Unbranded UK)
PDA: XWLP8
PHONE: XXLPS
CSC: XEULP5
Link: Download (Dev-Host)
Original Stock Packages (Unbranded Only!):
(Modifications: Pre-Rooted Only.)
Click to expand...
Click to collapse
Firmware: I9100XXMS1 (4.1.2) (Unbranded Poland)
PDA: XXMS1
PHONE: XXLS8
CSC: OXAMS1
Link: Download (Dev-Host)
Firmware: I9100XWLSD (4.1.2) (Unbranded Nordic Countries)
PDA: XWLSD
PHONE: XXLS8
CSC: OXXLS6
Link: Download (Dev-Host)
Firmware: I9100XWLS8 (4.1.2) (Unbranded Spain)
PDA: XWLS8
PHONE: XXLS8
CSC: FOPLS3
Link: Download (Dev-Host)
Firmware: I9100XWLPT (4.0.4) (Unbranded UK)
PDA: XWLPT
PHONE: XXLQ6
CSC: XEULPA
Link: Download (Dev-Host)
Firmware: I9100XWLP7 (Unbranded UK)
PDA: XWLP7
PHONE: XXLPS
CSC: XEULP5
Link: Download (Dev-Host)
Firmware: I9100XWLP7 (Unbranded Netherlands)
PDA: XWLP7
PHONE: XXLPS
CSC: XENLP3
Link: Download (Dev-Host)
Firmware: I9100XXLQB (4.0.4) (Unbranded Poland)
PDA: XXLQB
PHONE: XXLQ6
CSC: OXALQB
Link: Download (Dev-Host)
Firmware: I9100XXLQ7 (4.0.4) (Unbranded Poland)
PDA: XXLQ7
PHONE: XXLQ6
CSC: OXALQ7
Link: Download (Dev-Host)
Firmware: I9100XXLPW (Unbranded Poland)
PDA: XXLPW
PHONE: XXLPW
CSC: OXALPW
Link: Download (Dev-Host)
Firmware: I9100XXLPS (Unbranded Poland)
PDA: XXLPS
PHONE: XXLPS
CSC: OXALPS
Link: Download (Dev-Host)
Firmware: I9100DXLP9 (Unbranded Singapore)
PDA: DXLP9
PHONE: DXLP9
CSC: OLBLP9
Link: Download (Dev-Host)
Sounds good ... but isn't this what Odin Mobile Pro does already?
Mittaa said:
Sounds good ... but isn't this what Odin Mobile Pro does already?
Click to expand...
Click to collapse
Doesn't always work especially with new upcoming builds, you're bound to run into some trouble with everroot sooner or later.
lyriquid: Nice idea. I actually created a pre-rooted package like this some time ago with LPB. Took some trial and error, it worked. Had some trouble updating it later on. Was it worth it, sure, but in the end we have Triangle Away. This app just killed the reason for everyone NOT to root their phones with insecure kernels.
That is unless we are talking about a GB build of course. A prerooted XWLA4 with a stock kernel? Sounds good to me.
Mittaa said:
Sounds good ... but isn't this what Odin Mobile Pro does already?
Click to expand...
Click to collapse
No because Mobile Odin Roots the firmware on the fly and I believe your device has to already have Root access to do this but this method gives you a Clean and Pre-Rooted Package to flash in Odin on PC which means you can flash to a NON Rooted device and gain Root privledges.
Sent from my GT-I9100 using Tapatalk 2
lyriquidperfection said:
No because Mobile Odin Roots the firmware on the fly and I believe your device has to already have Root access to do this but this method gives you a Clean and Pre-Rooted Package to flash in Odin on PC which means you can flash to a NON Rooted device and gain Root privledges.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Need to have root that's true.
So yes this really sounds interesting
Join forces with some ROM kitchen so the user can build it's own pre-rooted firmware and flash it with some newbie's proof application (one button)
Hmm Nice Idea..
Looking forward!!!
Sent from my GT-I9100 using XDA
First ROM has been uploaded. The region is XEU.
If you require a different CSC Package then please let me know.
Enjoy!
lyriquidperfection said:
First ROM has been uploaded. The region is XEU.
If you require a different CSC Package then please let me know.
Enjoy!
Click to expand...
Click to collapse
Interesting, thanks for your work! I'm gonna bookmark this and maybe try it out in the near future. I've been meaning to try out LP8 (am on LP7 Netherlands now), but haven't really found a reason to.
The XEU is UK, but will not give me any trouble, right? CSC is pretty useless if you don't use KIES anyway. No need to request a XEN CSC for The Netherlands then.
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
victorator said:
Doesn't always work especially with new upcoming builds, you're bound to run into some trouble with everroot sooner or later.
Click to expand...
Click to collapse
Can you elaborate on that 'trouble'? I've used Mobile Odin Pro and Everroot to root my device, but haven't yet found any problems with everroot. If there are in fact problems with ER, it would make flashing the firmware in this thread an even more interesting alternative.
Thanks a lot,
added to my bookmarks... to direct the people who need only Root on their ICS..
anticipating more stock versions soon...
Donaghy said:
The XEU is UK, but will not give me any trouble, right? CSC is pretty useless if you don't use KIES anyway. No need to request a XEN CSC for The Netherlands then.
Click to expand...
Click to collapse
Hi, CSCs arent really that important. All they contain are default language selections, bookmarks, and bundled apps. They are for if people who just want things to match up with the country they are in. Intratech has a whole list of CSC packages in his thread that you could simply just flash after flashing one of my Pre-Rooted ROMs. Then you will have Root and correct CSC.
Sent from my GT-I9100 using Tapatalk 2
lyriquidperfection said:
Hi, CSCs arent really that important. All they contain are default language selections, bookmarks, and bundled apps. They are for if people who just want things to match up with the country they are in. Intratech has a whole list of CSC packages in his thread that you could simply just flash after flashing one of my Pre-Rooted ROMs. Then you will have Root and correct CSC.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I had a hunch that would be the case, but I haven't located a XEN (Dutch) CSC yet in Intratech's thread (was looking at his Frankenstein LP8 ROM before).
I'll figure it out though. So far, I'm not experiencing any trouble with my current ROM, so until **** hits the fan, I'll just keep this useful thread bookmarked.
Donaghy said:
Thanks. I had a hunch that would be the case, but I haven't located a XEN (Dutch) CSC yet in Intratech's thread (was looking at his Frankenstein LP8 ROM before).
I'll figure it out though. So far, I'm not experiencing any trouble with my current ROM, so until **** hits the fan, I'll just keep this useful thread bookmarked.
Click to expand...
Click to collapse
Leave it with me and I will upload XEN version of my rom and I will create a seperate XEN CSC for you to use with other roms if you wish.
Sent from my GT-I9100 using Tapatalk 2
I'd really like to try this, but can't seem to get into the FIlefactory link, it always says all the available free downloads are taken up. Any chance of a mirror?
austinchimp said:
I'd really like to try this, but can't seem to get into the FIlefactory link, it always says all the available free downloads are taken up. Any chance of a mirror?
Click to expand...
Click to collapse
Hi keep trying and I will sort some more mirrors.
Sent from my GT-I9100 using Tapatalk 2
lyriquidperfection said:
Leave it with me and I will upload XEN version of my rom and I will create a seperate XEN CSC for you to use with other roms if you wish.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Wow, I appreciate that offer a lot. If it's not too much trouble, I'd love to have a separate XEN CSC. Can't hurt to have on file, right? But don't let it take up too much of your time; I probably won't be doing any changes anytime soon, after five flashes in three weeks.
Flashed this earlier matey on my unbranded UK S2 and the install went smooth as silk via Odin Mobile Pro. Muchos thanks for your efforts
Can we have a mirror link for this plz!
This is a really interesting idea and I'm surprised more people haven't thought to do this.
Is there any chance you could upload a XSALP4 version?
Thanks in Advance
Links have been updated! Enjoy Direct Downloads!
Hi folks this thread is posted in order to help Portuguese owners of galaxy S3 with specific questions and specific hardware regional settings.
Many of us are rom adicts and starting flashing everything that comes out, and as a user sometimes I miss modem, CSC and so stuff.
That´s the sense of this trhead, is provide specific software like modem files for Optimus, Vodafone and tmn and open Tph.
Feel free to leave feedbacks, and to leave other things that could be usefull for us.
If I helped you in anyway just hit The thanks button. Its a second and fills me to continue hours of research.
Modems outadated, will be back later again.
Here are the links for the latest original portuguese firmware for S3.
Latest Generic Portugal
Country: Portugal (TPH)
Product Code: TPH
PDA: I9300XXEMC2
CSC: I9300TPHELL1
http://www.hotfile.com/dl/222821507/39c6e47/I9300XXEMC2_I9300TPHELL1_TPH.zip.html
Model: GT-I9300
Country: Portugal (Optimus)
Version: Android 4.1.2
Changelist: 1160235
Build date: Tue, 23 Apr 2013 08:46:02 +0000
Product Code: OPT
PDA: I9300XXEMD3
CSC: I9300OPTEME1
MODEM: I9300XXEMC2
http://www.hotfile.com/dl/225947018/fd3e809/I9300XXEMD3_I9300OPTEME1_OPT.zip.html
Model: GT-I9300
Country: Portugal (TMN)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: TMN
PDA: I9300XXEMC2
CSC: I9300TMNELL1
MODEM: I9300XXEMC2
http://www.hotfile.com/dl/223649394/76d0b14/I9300XXEMC2_I9300TMNELL1_TMN.zip.html
Model: GT-I9300
Country: Portugal (Vodafone)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: TCL
PDA: I9300XXEMC2
CSC: I9300VFGEMD1
MODEM: I9300BUEMC2
http://www.hotfile.com/dl/223643144/2fa2770/I9300XXEMC2_I9300VFGEMD1_TCL.zip.html
Android 4.2.2 leak with potuguese support
http://forum.xda-developers.com/showthread.php?t=2109734
Great post.
This really one of my concerns... I'm currently using DLJ4 with BTU modem.
Thanks for helping all of us Portuguese users.
This modem from Vodafone, can we use it with Optimus, for example?
Abraço,
kavsko said:
Great post.
This really one of my concerns... I'm currently using DLJ4 with BTU modem.
Thanks for helping all of us Portuguese users.
This modem from Vodafone, can we use it with Optimus, for example?
Abraço,
Click to expand...
Click to collapse
Uploading, so tmn and TPH will be today up.
Abraço
Otimus updated. Working on tmn and TPH
good morning everyone, can somebody tell me if there are replacement parts for our GSIII in the new color, sapphire black? and if there is, where?
by the way, thanks for creating this thread it could be really helpful.
Overscorp said:
good morning everyone, can somebody tell me if there are replacement parts for our GSIII in the new color, sapphire black? and if there is, where?
by the way, thanks for creating this thread it could be really helpful.
Click to expand...
Click to collapse
Try on e-bay, I think you can find a lot there.
Abraço.
TMN updated!
Can you explain us how you extract the modem from the ROM?
Abraço,
Thanks,
testadeferro said:
4.1.1 Modem for LJ5 Vodafone PT extracted from 4.1.1 Vodafone update, tested and working:
Please unzip the file first, THIS IS NOT CWM FLASHABLE!!!! Then flash it with odin as modem.bin
Otimus modem updated!
TMN updated!
The vodafone modem is the modem.zip.
Please unzip the file before flasing with odin.
Click to expand...
Click to collapse
Thanks for sharing this!
Tell me, if i flash in odin will do a factory resert?
vladmir said:
Thanks for sharing this!
Tell me, if i flash in odin will do a factory resert?
Click to expand...
Click to collapse
No, nothing will happen to your data or phone, you just get a better phone signal.
Can Anyone make the file modem a cwm flashable zip?
Sent from my GT-I9300 using xda app-developers app
Hackpb said:
Can Anyone make the file modem a cwm flashable zip?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I can do that but for what? you can allways flash using mobile odin...
kavsko said:
Can you explain us how you extract the modem from the ROM?
Abraço,
Thanks,
Click to expand...
Click to collapse
Sure, just extract from the tar file the modem bin file with 7zip.
testadeferro said:
No, nothing will happen to your data or phone, you just get a better phone signal.
Click to expand...
Click to collapse
Ok, i don't have root. Para can you make a tar file for PC odin?
Thanks
Sent from my GT-I9300 using Tapatalk 2
With odin you dont need root. Just flash your desireble modem as modem.bin in odin. Dont tick anything in odin. Just modem and thats It.
And modem is not a tar file for odin isso .Bin
Sent from my GT-I9300 using xda premium
Hey.
Also have a TPH S3 running ICS stock, bought in portugal. Tell me if you need anything from mine (you may need to tell me how to do it though)
Tph is in ics for now. The Bin file you can extract from original tar file. I think we dont need this now. Only will make sense when you use 4.1 roms. The point is to use latest firmware from Samsung With our specific modem. I m using lj5 (4.1.1) from índia and without The Vodafone modem Portugal I Get many network breaks. With The correct modem none. Thats The point. I advice you to update to lj5. And then flash The modem even for one of The 3 carriers. You will have a great gain in Android 4.1.1 on your S3.
Sent from my GT-I9300 using xda premium
Nice to see such thread here... Thuns UP...
Cheers
Hi Guys,
Where I do the download firmware Kitkat 4.4.2 to SGN3 SSN N9005GSMH, any can help me, I thanks!!!
samfirmware.com or samsung-updates.com
I have a gn3 whenever I check for updates it says I have the latest do I have to manually update it?
MeInQ8 said:
I have a gn3 whenever I check for updates it says I have the latest do I have to manually update it?
Click to expand...
Click to collapse
Your mobile is rooted?
xdm9mm said:
samfirmware.com or samsung-updates.com
Click to expand...
Click to collapse
Where I check my firmware region?
herthon said:
Where I check my firmware region?
Click to expand...
Click to collapse
When you click on a firmware over at samfirmware it should tell you.
Edit:
Sorry if you mean you want to check your phone's region you can download "phone info" from google play.
herthon said:
Where I check my firmware region?
Click to expand...
Click to collapse
@OP: Please find the answer here: http://forum.xda-developers.com/showthread.php?t=2726538
Thanks @xdm9mm for the suggestion.
Nope, I even checked with Kies it says I'm on the latest but I'm not
herthon said:
Your mobile is rooted?
Click to expand...
Click to collapse
herthon said:
Hi Guys,
Where I do the download firmware Kitkat 4.4.2 to SGN3 SSN N9005GSMH, any can help me, I thanks!!!
Click to expand...
Click to collapse
You`re phone is from Hong Kong appearently According to users http://www.sammobile.com/forum/showthread.php?t=15727), look on Sammobile for Hong Kong roms. This also seems to work for some users http://forum.xda-developers.com/galaxy-s3/general/guide-how-to-reinstall-stock-firmware-t1978840.
Can I get some help please for my issue : )
MeInQ8 said:
Can I get some help please for my issue : )
Click to expand...
Click to collapse
Type in dialpad #*1234# and post what you see, where did you buy the phone and where do you live? Have you looked on www.sammobile.com/firmwares/2/ for firmwares?
Kuwait and I got it from a mobile shop here
gee2012 said:
Type in dialpad #*1234# and post what you see, where did you buy the phone and where do you live? Have you looked on www.sammobile.com/firmwares/2/ for firmwares?
Click to expand...
Click to collapse
MeInQ8 said:
Kuwait and I got it from a mobile shop here
Click to expand...
Click to collapse
Firmwares Saudi Arabia unlocked KSA http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=KSA#firmware or STC (carrier version) http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=XFU#firmware. Download and flash with Odin 3.07 in downloadmode (will not trigger KNOX warranty).
MeInQ8 said:
Kuwait and I got it from a mobile shop here
Click to expand...
Click to collapse
Nope, the info from #*1234# is almost useless because OJV is a Multi-csc, it includes the following 3 csc: XSI, KSA and XFM.
(you can get this info by open Phone INFO ★Samsung★ app, select menu --> CSC Lookup and search for the 'OJV')
So you don't know what exactly your csc is.
Instead, in your previous post, you know exactly your csc is XSI. So the download link for your firmware on sammobile is:
http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=XSI#firmware
vndnguyen said:
Nope, the info from #*1234# is almost useless because OJV is a Multi-csc, it includes the following 3 csc: XSI, KSA and XFM.
(you can get this info by open Phone INFO ★Samsung★ app, select menu --> CSC Lookup and search for the 'OJV')
So you don't know what exactly your csc is.
Instead, in your previous post, you know exactly your csc is XSI. So the download link for your firmware on sammobile is:
http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=XSI#firmware
Click to expand...
Click to collapse
If the phone is unlocked he just has to flash the latest Saudi KSA rom, but apart from the CSC file they are probably identical
gee2012 said:
If the phone is unlocked he just has to flash the latest Saudi KSA rom, but apart from the CSC file they are probably identical
Click to expand...
Click to collapse
Yes I see, but I think the OP will prefer flashing the firmware from the 'Original' CSC
Why can't I do it OTA? If so..
This one:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 636608
Build date: Tue, 04 Mar 2014 04:48:22 +0000
Product Code: XSI
PDA: N9005XXUENC2
CSC: N9005OJVENB2
MODEM: N9005XXUENC2
OR this one:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 636608
Build date: Tue, 04 Mar 2014 04:48:22 +0000
Product Code: XSI
PDA: N9005XXUENC2
CSC: N9005OJVEND1
MODEM: N9005XXUENC2
vndnguyen said:
Nope, the info from #*1234# is almost useless because OJV is a Multi-csc, it includes the following 3 csc: XSI, KSA and XFM.
(you can get this info by open Phone INFO ★Samsung★ app, select menu --> CSC Lookup and search for the 'OJV')
So you don't know what exactly your csc is.
Instead, in your previous post, you know exactly your csc is XSI. So the download link for your firmware on sammobile is:
http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=XSI#firmware
Click to expand...
Click to collapse
Can I use this one for my phone?
(PDA: N9005XXUENC2 CSC: N9005OJVEND1 MODEM: N9005XXUENC2 CHANGELIST: 636608 BUILD DATE: 04.03.2014)
MeInQ8 said:
Can I use this one for my phone?
(PDA: N9005XXUENC2 CSC: N9005OJVEND1 MODEM: N9005XXUENC2 CHANGELIST: 636608 BUILD DATE: 04.03.2014)
Click to expand...
Click to collapse
Of course yes, because it has the same CSC as yours.
Thanks