[Q] HD2 Tuto flashing = Black screen but .. ? - HD2 Android Q&A, Help & Troubleshooting and Genera

Hello,
This night, i have flashed my HD2 with Android using this tutorial :
http://forum.xda-developers.com/showthread.php?t=893948
Everything was Ok. I followed the tutorial, finally i flashed the device.
My phone started with new Android system, i setup my Wifi connections, operator config....
Suddenly when i pushed the power button, my screen becames black.
Now when i remove the battery and power on the HD2. I can hear the sound of "HTC Quielty brillant" 's screen, a sound when Android looks to start. Finally my ativity LED turn Green (Stay green). The screen stay black. But the button and the backlight works fine. If i try to power on with Volume down, my screen still stay black to but i can't hear sounds of HTC (It looks like boot is working but no diplay :l )
So there is my question :
Do you think my HD2 is bricked ? I don't think cause i can hear sounds but in your opinion ?
Maybe it's my screen which is broken ? But exactly when i used my Android ROM for the 1st time ! Strange ?! :l
Maybe it's a way to fix it ? I missed something ?!
Please help me My Chrismas presents was HD2, clothes, clothes, clothes .... If I bricked my new smartphone ... I d'ont' care about clothes :S

It might be a hardware problem, it is a known problem that HD2s have their screen cables under the power button. So it might be that.
But 1 question: when you say the backlight is working, do you mean that the screen is light up, but with black color, nothing showing? - in this case, your hardware is OK. If so, then you should try getting into bootloader and install another different ROM.
Or you mean only that the buttons are lit up? In that case I'd say that the hardware is the problem.
In that case you'll have to return it for warranty... But you'll have to get the stick ROM on it back again... Thats gonna be another problem.
Lots of problems, sorry to hear that...

Thank you for your help
This is the video of what happens when i turn it ON. lol
youtube.com/watch?v=TegCQxCeIJY
(out-links filter )
But 1 question: when you say the backlight is working, do you mean that the screen is light up, but with black color, nothing showing? - in this case, your hardware is OK. If so, then you should try getting into bootloader and install another different ROM.
Click to expand...
Click to collapse
It looks to be this case.
But when i boot my phone with Vol.Down pressed.
It don't start same way. But there is nothing displayed ...
Is it possible that the way i flashed the phone is making that the screen don't work ? (With the version on Radio or something about flashing ?!)
The person which gave me the phone, stop warranty to put it on his newone
So i'll must to find a solution in every cases or accept defeat

Ok, from what I see, it must be software problem, because there is backlight after turn on, so the screen works.
now, have you flashed clk or magldr?
If clk, then try after turning on the phone holding the home button. That should start the clockwork mod recovery. Maybe it will start.
However, you should try connecting the phone to your computer and seeing if the PC loads the phone?
If so, you should download hd2 toolkit (search for it) and run task29 on it (that will erase the nand memory completely).
Then flash the bootloader again, then continue with ROM installation as before.
Hopefully after task29 it should start working.
But 1 warning! After task29, you must install bootloader immediately, BEFORE disconnecting the phone or restarting it. If you don't, you'll brick your phone. Bootloader must be installed before restarting/ rebooting the phone.
I'm no expert in all this, I recommend to do a lot of reading before attempting all this.
Good luck mate!

Thats not right, you can flash everytime after you used task 29, you just need HSPL.
Also the phone restarts by itself after using task 29...
Sent from my HD2 using XDA Premium App

Reaper1337 said:
Thats not right, you can flash everytime after you used task 29, you just need HSPL.
Also the phone restarts by itself after using task 29...
Sent from my HD2 using XDA Premium App
Click to expand...
Click to collapse
I hoped someone would correct me i dont use task 29 from hd2 toolkit often, i'm on clk, so everything done through cwm.

Finally I tried what you recommend. To make a Task29. And it looks to work but my screen still stay black... I think there is a problem with the data connection between the phone and the screen... the connector must be badly connected or a little bit destroyed something like this... :l
What do you think about this ?
Thanks for your help. Sorry for the time between my answers.

I have written a clk guide that will make this process much easier for you. I'm on my phone and the YouTube video isn't working. I will update this post more once I watch video.
But as of right now it sounds like you need a new rom
Edit:
I've read more, and somethings wrong with your screen. Your screen can be broken and the back light still work. In fact, it sounds like everything works fine except the screen. I think you need to flash back to windows mobile and send it in for a warranty repair.
Sent from my HD2 using xda premium

Panpz said:
The person which gave me the phone, stop warranty to put it on his newone
So i'll must to find a solution in every cases or accept defeat
Click to expand...
Click to collapse
^^ I'm going to find a tutorial to open the phone then check the state of connectors

Related

[Q] is my phone fudged?

I think my phone might be fudged. I have been running android fine for the last few weeks until it crashed, I removed the battery to reset but the phone wouldn’t turn back on. However I could boot to the tri-color screen so I tried putting windows 6.5 back on the phone, the installation finished but the phone still wouldn’t boot the OS. I can still get the tri-color screen and have tried re-installing the radio/magdlr but they stick on 0%. Also my battery at best probably has 20-30% of juice left (it won’t charge either).
Anyone know what the cause of the problem is and if there is a way it can be fixed?
thanks in advance!
harrybob_17 said:
I think my phone might be fudged. I have been running android fine for the last few weeks until it crashed, I removed the battery to reset but the phone wouldn’t turn back on. However I could boot to the tri-color screen so I tried putting windows 6.5 back on the phone, the installation finished but the phone still wouldn’t boot the OS. I can still get the tri-color screen and have tried re-installing the radio/magdlr but they stick on 0%. Also my battery at best probably has 20-30% of juice left (it won’t charge either).
Anyone know what the cause of the problem is and if there is a way it can be fixed?
thanks in advance!
Click to expand...
Click to collapse
Try doing a Task29 then flash a compatible Radio then flash MAGLDR.. and lets see what happens
You will need to charge your battery. If it dies during a flash then you will have an even bigger problem to sort out.
If its less than 50% this is probably why its sticking at 0%.
Is your HSPL still intact and which radio are you using?
Sent From My Fingers To Your Face.....
conantroutman said:
You will need to charge your battery. If it dies during a flash then you will have an even bigger problem to sort out.
If its less than 50% this is probably why its sticking at 0%.
Is your HSPL still intact and which radio are you using?
Sent From My Fingers To Your Face.....
Click to expand...
Click to collapse
lower than 50% doesn't really matter from the bootloader, only RUU.
It sounds like hardware problem, or something fishy going on in NAND, I'd do task29 followed by ROM/Radio
thanks for the responses. I still have hspl, I manged to successfully install task 29 after that I tried flashing a windows 6.5 rom, once again phone won't start up after 100% all i can do is get to the 4 colored screen.
is there anything else I can try? considering my battery must be really low and I have no way of charging it.
harrybob_17 said:
thanks for the responses. I still have hspl, I manged to successfully install task 29 after that I tried flashing a windows 6.5 rom, once again phone won't start up after 100% all i can do is get to the 4 colored screen.
is there anything else I can try? considering my battery must be really low and I have no way of charging it.
Click to expand...
Click to collapse
Buy a cheap external charger off ebay.
harrybob_17 said:
thanks for the responses. I still have hspl, I manged to successfully install task 29 after that I tried flashing a windows 6.5 rom, once again phone won't start up after 100% all i can do is get to the 4 colored screen.
is there anything else I can try? considering my battery must be really low and I have no way of charging it.
Click to expand...
Click to collapse
If you got 100% when you flashed the Windows Mobile ROM and your HD2 rebooted itself, then you sucessfuly flashed the ROM.
Did it boot up to the bootloader or the first splash screen (Stick Together or white HTC screen depending on which HD2 you have)?
If it booted to the first splashscreen it could be the processor having troubles or possible bad blocked incthe NAND memory.
If it boots straight to bootloader then you have a bad NAND memory.
It doesn't reboot to either screen, it simply turns off after the rom is finished installing and doesn't start back up again. The only thing I can do is press volume down and red button to boot the 4 colored screen. When I press the power button all that happens is the phone sometimes makes a tiny vibration.
harrybob_17 said:
It doesn't reboot to either screen, it simply turns off after the rom is finished installing and doesn't start back up again. The only thing I can do is press volume down and red button to boot the 4 colored screen. When I press the power button all that happens is the phone sometimes makes a tiny vibration.
Click to expand...
Click to collapse
Yeah sounds like you probably have a internal problem with hardware. But it might could because software related issue, but I highly doubt it. The only software problem you could have that I can think of is a problem with your SPL or HSPL which ever one you have, but you should have HSPL cause you where running Android.
Would a corrupt bootsplash do this?
Sent from my HD2 using XDA Windows Phone 7 App
hakuchi18v said:
Would a corrupt bootsplash do this?
Sent from my HD2 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
If you are asking if a currupt splash screen could cause your issue, I would have to say it could be possible, but I do not know enough to say for sure, sorry. You can put this to a test though and flash another splash screen, but the ROM should have flashed a splash screen. Maybe the splash screen it flashed was currupted or had a bad flash. Go to this link to get a splash screen and learn how to flash one.
I've said this a lot in other threads, but create a gold card SD. This will allow you to flash ALL the necessary components from the SD card. Then report back with your experience...

Stuck in Splash Screen

My frigin HD2 keeps freezing on me on the splash screen. How do I fix this? I'm running windows 6.5 and I can't seem to get past the splash screen. It's mocking me. Someone please help before I smash this thing.
flashed anything recently? do you get RGD info, small red txt, bottom left on splashscreen?
This is my fathers phone and I haven't flashed anything for him since I flashed the energy rom stable version. I get to the small red text and then it freezes and nothing happens.
try the factory reset, switch off - press the up and down volume keys together and hold them in - press the power button release the buttons when you get the white screen read and follow the instructions
johnerz said:
try the factory reset, switch off - press the up and down volume keys together and hold them in - press the power button release the buttons when you get the white screen read and follow the instructions
Click to expand...
Click to collapse
Thank you for the advice. I've tried this and I still get stuck with the opening splash screen. Anyone else?
Try booting the HD2 without te sim card or the SD card in, bit do it ome at a time so you can see of the sim card of SD card might be giving you a problem.
If no joy with that option, then put the HD2 in a sealable plastic bag and then in the freezer for 10 to 15 minutes then try to bootx it. If it boots then the device is more than likely experiencing hardware problems. So if the HD2 is still umder warranty flash the stock ROM and SPL back to the HD2 and send it in for repair or ecxhange.
Thanks everyone for the suggestions, it seemed to be a hardware problem. I sent it back to HTC and they repaired it for a small fee. Now I seem to be having problem with it reading sim cards so I'm not really too sure whats going on with that.
HI everyone it seems that i have the same problem now, i dont know if i should open a new thread. Anyways, i installed RiffleLock v14 and combined it with live wallpaper. I guess this was a "deadly" combination. My phone keeps on restarting . Even with hard reset using physical hardware. After i completed the whole process. When it starts, same problem arises, phone keeps on rebooting... can anyone help me on this?
Bought this phone just 2 weeks at ebay. It is an HTC HD2 Android (this is now the ROM inside phone memory) CM7 Typho0n 2.3.4... cant give you anymore info this is my first time to own a droid.
I already PMed a senior member, but any suggestions and help will be very much appreciated. Thanks!!!
earthworm1102 said:
HI everyone it seems that i have the same problem now, i dont know if i should open a new thread. Anyways, i installed RiffleLock v14 and combined it with live wallpaper. I guess this was a "deadly" combination. My phone keeps on restarting . Even with hard reset using physical hardware. After i completed the whole process. When it starts, same problem arises, phone keeps on rebooting... can anyone help me on this?
Bought this phone just 2 weeks at ebay. It is an HTC HD2 Android (this is now the ROM inside phone memory) CM7 Typho0n 2.3.4... cant give you anymore info this is my first time to own a droid.
I already PMed a senior member, but any suggestions and help will be very much appreciated. Thanks!!!
Click to expand...
Click to collapse
kutos for not starting a new thread! (btw what you describe for your android is called nand.)
my suggestion: start over. flash back to WM, then reinstall android on nand. takes ~15 minutes and will give you a clean start. otherwise, who knows what happened. or at the mininum, reflash your rom. or flash a new rom. but i like the WM option as you can see if is hardware or software as the culprit.
however, reboots can also be to bent battery pins.
"kutos for not starting a new thread! (btw what you describe for your android is called nand.)
my suggestion: start over. flash back to WM, then reinstall android on nand. takes ~15 minutes and will give you a clean start. otherwise, who knows what happened. or at the mininum, reflash your rom. or flash a new rom. but i like the WM option as you can see if is hardware or software as the culprit.
however, reboots can also be to bent battery pins"
Tried and checked that battery pins too! But actually it was the hard reset that baffles me. It takes like a second only, and it restarts. But when it do restarts it is like i did not do a hard reset. I like the advise you gave me, but the problem is i only had this phone for a little than 2 weeks. I cant even flash this coz it is stuck on bootscreen, I cant follow even tutorials on you tube coz it doesn't show that it was messed up like mine before they started flashing it. It's like a "Where do i begin Love Story song lol!!
I tried to contact the person who sold me this phone at ebay but he wont respond.
So what choices do i have here, i dont know how to flash with the current situation of my phone. Am even thinking of mailing this to anyone and giving me a dual boot then and just freakin pay and spend more over this phone. I dont have a choice.....
Any more suggestions here would be greatly appreciated.
hard reset ,nothin changed
i think we are talking about a couple of different things here (maybe).
when i say hard reset i mean - boot into bootloader (3 colored screen) - reboot holding volume key down - and via usb or sdcard flash back to windows mobile. have you done that? can you get to bootloader?
sucks you're having issues...
Yeah i can go to the 3 colored screen. That is actually the first i see before the "white screen"... can you teach me how to do that kind of hard reset??
I dont have WinMo anymore... the guy that sold me this phone put Android as the main OS.
earthworm1102 said:
But actually it was the hard reset that baffles me. It takes like a second only, and it restarts. But when it do restarts it is like i did not do a hard reset.
Click to expand...
Click to collapse
doing a hard reset when magldr/android is installed is pointless, because it doesnt reset anything, (or i think ive seen it said that it hard resets magldr, the effect is the same, , , nothing happens) which is why it only took a few seconds.
earthworm1102 said:
Yeah i can go to the 3 colored screen. That is actually the first i see before the "white screen"
Click to expand...
Click to collapse
still got a leoimg.nbh on your sd card? could explain the white screen,,,
when i say hard reset i mean - boot into bootloader (3 colored screen) - reboot holding volume key down - and via usb or sdcard flash back to windows mobile.
Click to expand...
Click to collapse
thats not a hard reset, thats flashing back to stock.
samsamuel said:
thats not a hard reset, thats flashing back to stock.
Click to expand...
Click to collapse
yep yep. tis what i meant.
@ the op, since you didn't put the rom on your phone, i would flash back to stock (aka back to windows mobile) and get rid of android. then put back android. see what happens.
read this thread, #5 to be exact to get back to windows mobile:
http://forum.xda-developers.com/showthread.php?t=893948
this will get rid of android, save your hspl which will make putting android back on easy. however, if the problem exists in wm, is out of my knowledge, and is not seemingly software and more likely hardware. but if samsamuel thinks different, he knows a ton, and has helped me out of many a pickle. cheers.
K bro. Thanks!! +1 thanks for you!!!!
@samsamuel am talking about the white screen wherein you will hard reset ( holding volume up/down and red key). Oh well. I just talked to the person whom i bought the phone he will just put back original rom and i might just have a dual boot. Hope this will be much better. Thanks guys!!
Learn from our mistakes.... this will be sticky for me!!!
guess samsamuel is the man!!!
well glad you will have a solution. but just so you know - dual boot means one of two things - WM on your phone and android on the SD card or WindowsPhone7 on your phone and android on your SD card. No "real" dual boot per se.
honestly, i would try to look at putting on your preferred rom. good luck!
You mean dual boot isn't good? Is that more of a disadvantage rather than an advantage. Or will a noob like me [email protected]##ed this phone again and will be in more trouble?
Not saying good or bad. Rather dual boot means android is on your SD card. Very easy to get this going. Wont hurt your system. Just being informative.
I prefer nand android but that is my preference. If you will never use windows mobile and only android I would forget dual....but is all about preference. Cheers.
Sent from my HTC HD2 using XDA App

HD2 Serious freeze HELP!

I think here might be something wrong with the htc sense, but the thing is, that my hd2 touchscreen wont respond to my touch. When i'm at the unlock screen, i cant slide it to open up. This wont change after reboot either.
So eventually i set a hard-reset on the phone, but it didn't work after that either. I tried three times, no respond. Without the sim and with it in.
I cant recive calls or text messages, because i cant tap my PIN in, neither i could open or answer. I'm f***ed.
Okay, the next day i do my fourth hard-reset, and it starts working again, but after a time of use, it will start getting slow with the touch again, and then it will stop responding again. So I don't now what to do. There is now warranty time left, so i want to see what i can do my self before taking it to a repairing place and pay 100 € for it.
This is my everyday phone, and i would like to get it back to normal state as soon as possible, so many many many thanks to all who try to help me out of this
Cheers,
Nother
notherman10 said:
I think here might be something wrong with the htc sense, but the thing is, that my hd2 touchscreen wont respond to my touch. When i'm at the unlock screen, i cant slide it to open up. This wont change after reboot either.
So eventually i set a hard-reset on the phone, but it didn't work after that either. I tried three times, no respond. Without the sim and with it in.
I cant recive calls or text messages, because i cant tap my PIN in, neither i could open or answer. I'm f***ed.
Okay, the next day i do my fourth hard-reset, and it starts working again, but after a time of use, it will start getting slow with the touch again, and then it will stop responding again. So I don't now what to do. There is now warranty time left, so i want to see what i can do my self before taking it to a repairing place and pay 100 € for it.
This is my everyday phone, and i would like to get it back to normal state as soon as possible, so many many many thanks to all who try to help me out of this
Cheers,
Nother
Click to expand...
Click to collapse
Have you flashed HSPL on it or this is all stock ROM?
honestly it looks like a hardware issue to me.
well i looked at the stats, and seems like i have HSPL on it, but it's not bought from a reseller, it was bought second-hand. it has worked perfectly until a few days ago, then the freezing started.
notherman10 said:
well i looked at the stats, and seems like i have HSPL on it, but it's not bought from a reseller, it was bought second-hand. it has worked perfectly until a few days ago, then the freezing started.
Click to expand...
Click to collapse
ok if it has HSPL on there that means someone flashed something on there.
I would flash task29, then flash the ROM of your choice and see if it still does it.
If the ROM is the problem a hard-reset won't fix it, so let's try this and see what happens.
Okay thanks for the help
the only problem is that i'm running on a mac, and i cant find any software to flash the hd2 on a mac..? Do you now any?
and could you link me a thread or a tutorial to how to flash 'cause i'm quite new with this anyway.
Thanks!
notherman10 said:
Okay thanks for the help
the only problem is that i'm running on a mac, and i cant find any software to flash the hd2 on a mac..? Do you now any?
and could you link me a thread or a tutorial to how to flash 'cause i'm quite new with this anyway.
Thanks!
Click to expand...
Click to collapse
There is no way to do this on a mac, find a PC.
ok, here's the quick version.
1) download the attached file from this post:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
2) turn your phone off, then turn it back on while holding the vol-down arrow, this will bring you to a tri color screen. Make sure you are plugged in via USB.
(you could do this via activesync, but I want to avoid the freeze so this gets you right into bootloader)
3) unzip the file and run it, follow the on-screen instructions, it will flash task 29, which is basically a good reformat.
4) if you are fast, hold the vol down arrow when it reaches 100% and don't let go till you're back at the tri-color screen. If it goes to the splash screen it will stay there forever (because there is nothing flashed on your phone now). You have to do a battery pull or press the reset button. In this case hold the vol-down arrow again and power on the device to get you into the tri-color screen again.
5) Download the ROM of your choice from this forum:
http://forum.xda-developers.com/forumdisplay.php?f=534
They are all custom ROMs, my favorite is the this one currently:
http://hotfile.com/dl/117879873/9b01b43/Energy.Leo.29020.Sense2.5.Cookie.2.0.sencity.May.14.7z.html
It was taken from this thread:
http://forum.xda-developers.com/showthread.php?t=591784
and is the awesome one with big finger friendly buttons as well as that awesome blackish theme (Sencity)
If you don't want a custom ROM then go to the HTC support site and find your stock ROM, download and flash that via SD card (I am assuming you have an international HD2 and not a TMOUS one).
If for some reason you have a TMOUS one DO NOT GO THRU HTC BUT USE TMOBILE'S SUPPORT SITE.
Let's get you rocking and rolling!
Thank you very much for your help, i'm very grateful
I'm going to run W7 virtually, just to be quick.
And I was thinking to flash straight to Android, is that possible? Like android 2.3 or something.
Cheers!
sorry if I made you unhappy, but my phone is now in a technic service due to same problem, it never fixed with a rom update, day by day your problem will appear more frequently, this is a hardware issue, maybe digitizer maybe hardware buttons block your touch screen.. I will see what will happen after my phone come to my hands again..
Okay thanks.
I will see what the reflashing will do. Then if it doesn't work, i will take it to repairing.
Thanks!
notherman10 said:
Then if it doesn't work, i will take it to repairing
Click to expand...
Click to collapse
definitely send to repairing and dont try any thing by you self ... you will end doing more damage - except Software solution...
anyway i wish all the best and i hope you fixit
best regards from me

[Q] [HELP] Cannot enter bootloader, can still boot android

So, I cannot seem to get into bootloader on an HD2. This isn't my phone and I did not perform the original flash, so I'm not quite as familiar with the HD2 toolchain.
The problem is simple, I cannot load into the tri color bootloader. I haven't ever been able to, so I don't have anything to trace to what apparently removed it.
I still can however use MAGLDR to boot android from NAND and flash android roms etc.
The trouble is this phone needs to be shipped to HTC for repair and I need to restore to stock, but I cannot reach boot loader to use any tools or flash any stock roms etc. I saw something on the JTAG restore product but I thought wasn't ideal if still under warranty.
Pretty desperate here since the warranty period ends real soon. thanks for any help!
Just to make sure....In order to reach the boot loader screen, you need to turn off the phone and then hold the volume down button and power button until the boot loader screen pops up. Just making sure you did this!
yeah, been trying that to no avail
Can still get to MAGDLR real easy though.
thanks
waste55 said:
yeah, been trying that to no avail
Can still get to MAGDLR real easy though.
thanks
Click to expand...
Click to collapse
Out of curiosity, are any of your buttons not working?
most are working just fine. Only weird this is the red hang up\power button brings up the shut down menu on a single press from time to time once inside android. I believe it to be caused the original issue (random boot lock ups that take anywhere from 2 min to boot android or 25 min, or doesn't at all before battery dies) but this phone has been so flaky its been impossible at times to reproduce results.
waste55 said:
most are working just fine. Only weird this is the red hang up\power button brings up the shut down menu on a single press from time to time once inside android. I believe it to be caused the original issue (random boot lock ups that take anywhere from 2 min to boot android or 25 min, or doesn't at all before battery dies) but this phone has been so flaky its been impossible at times to reproduce results.
Click to expand...
Click to collapse
Hi,
10 char
After over a year of flashing different roms with no issues, I'm also now having a similar problem...
http://forum.xda-developers.com/showthread.php?t=1189115
malybru said:
Hi,
10 char
Click to expand...
Click to collapse
Thanks for the response, I'm not to familiar with the hd2 tools/commands is this likely to help with the power button issue or the "missing" bootloader? Sorry for not googling but have limited connection atm so barley got this message out
waste55 said:
Thanks for the response, I'm not to familiar with the hd2 tools/commands is this likely to help with the power button issue or the "missing" bootloader? Sorry for not googling but have limited connection atm so barley got this message out
Click to expand...
Click to collapse
HI,
My reply was not relevant.
Sorry I could not help.
If I am reading right this sounds like a similar issue which I had. I went from my car which had really cold A/C and then went to my room which was really hot. There was condensation on the phone and did not think much of it. My buttons started either acting strange or not working. First I tried putting the phone in some rice as rice tends to attract water molecules. This did not work. I then sprayed windex with the phone off and batter, sdcard, simcard out and then wiped down the phone put it in the rice for about an hour or 2. After I did this a few times my buttons started working normal again. No more safe mode and all my buttons work.
Either that or your volume down button is just not working. In which case I don't believe there is any other way to enter the bootloader. If you can connect through microsoft activesync you may be able to restore the original windows 6.5 that way.
Only thing is the vol down button works fine once boot in android. Power button is only weird one and its only acting up depending on the moon phase apparently.
Sent from my HTC Vision using XDA App
Ok so I was searching for some links on using active sync to flash but any guide I find also is using HSPL to do the flash which is not apparently present on the device. Would you happen to have any links on performing a flash via active sync that doesn't involve any sort of SPL?
Thanks a bunch
Sent from my HTC Vision using XDA App
HSPL is what is used to flash any rom that is not an original from tmobile. SPL is the original that would have come onto the phone and locks the phone from installing any roms except tmobile. With the hspl program you need to be able to boot into boot loader. I have tried windows mobile device center which is what is used in windows 7 instead of active sync but it does not connect. I am afraid that you are stuck unless you can get into boot loader somehow. The only way I know is to hold the volume down button as soon as you power the phone on.
waste55 said:
Ok so I was searching for some links on using active sync to flash but any guide I find also is using HSPL to do the flash which is not apparently present on the device. Would you happen to have any links on performing a flash via active sync that doesn't involve any sort of SPL?
Thanks a bunch
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm sending mine back to HTC
FINALLY!
All I did was...wait. I took the battery out for a couple hours, and tried again and bam it came up! I tried for like two days before this. I then followed the standard LEOIMG.nbh to the sd card and it restored win mobile and SPL just fine.
I guess it sounds crazy but just take the battery out for a while or overnight perhaps. I really didn't do anything so that's all I have to offer.
I think this HD2 has an overheating issue or something because it starts to act up once on after a while (power button...boot problems as described above).

HD2 Black screen after a call?

Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.
luba6ky said:
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.
Click to expand...
Click to collapse
[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
luba6ky said:
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.
Click to expand...
Click to collapse
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk
black screen after recieving or making a call
Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...
erikgee said:
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...
Click to expand...
Click to collapse
Your better off doing what I did. In Android, sonewhere in the settings for calling, change the sensor to off so it never blacks out. In Miui rom its in program's, then calls.
Sent from my LG-VM670 using Tapatalk
Task 29 and start fresh. Only thing that got rid of it, test when you first start the rom to make sure it works normal, then start adding your apps and such.
Or increase the 125mhz CPU settings to 245mhz under cyanogenmod settings/performance/CPU or governor settings.
Sent from my HTC HD2 using Tapatalk
my screen stay black (off) when i take the phone away from my face EVERY call as well. this is what i do and it works everytime.
1.)pull the phone away from my face (duh)
2.)starting with it facing the sky, i turn it to face the floor (when i say facing i mean screen up ... then screen down)
3.)as soon as i turn it back over (screen face up) it turns on
im thinking its a sensor issue??? either way it works and i dont go on a hardware button mash fest to turn my precious leo back on.
if this helps please send thanks ... if not tell me im crazy :-D
Curiousn00b said:
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I just download this apk and will try it ....
But I think it's hardware problem (may be with the sensor), because when I turn back on Win Mobile 6.5 i have the same problen ...
I think to bring the phone to service
... when I take it back will tell you what is exactly the problem ...
Task 29 then install windows, next install the right radio version , finally install the android
like dragonovus say´s try completly reinstalling android.
and please feedback here
BUILD.PROP baby!!! there is a tweak for this and i believe it works( in the prop ) dont know exact address but google "build prop tweaks" also use setCPU and set the lower number to about 350+ also try to use the end hardware button less cuz this has been addressed in another thread..... the button sticks or sum crap..... i use zmooth and never use the red end button........... good luck
Will try all, but now I use ' Screen stays on '
Sent from my LG-VM670 using Tapatalk
well ... for me Screebl Lite didn't help me
Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...
And at the end did anyone of u solved this? If u need help post reply or pm me. I think i have a solution for u.
Sent from my HTC HD2 using Tapatalk
PPKLP said:
Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...
Click to expand...
Click to collapse
Yes, man! I have the HSPL2.08 and radio 2.15.50.14 ... I think we all do. I can't use the soft buttons, because I can't see them. That's is the problem. The screen is black and won't lights up. May be I can't read you ... but I try to run back Win Mobile just to check is it from android OS or the sensor...
build.prop does not help
I tried the build.prop thing. I added those 2 lines at the end of the file:
ro.lge.proximity.delay=25
mot.proximity.delay=25
No change, still a black screen after any call.
Any other idea ? How to completely deactivate the proximity sensor ?
Fixed !
I finally fixed the issue by removing the screen protector sheet and cleaning the upper left part of the screen with a dry towel.
It works fine now. It was just a problem of the proximity sensor not being exposed enough.
I hope this helps.

Categories

Resources