Database Users

[Q] need help for sd card partition

hello everyone,
i need your help to partition my sd card and to enable app2sd, last week i had formated my sd card cause i ve got somme probleme witjh it the sd carde were parttionned and working fine but after formating it i tried to partition it with mad team app2sd(using kyrillos 4.1 oc) application as i did befor, but after enting commande in termainal emulator and copying fs convert to fugmode reprtory in sd card i can t no longer see a2sd line in titanium back up i tried to reformat reflash with xjpf, xjpm then many other custom rom nothing happen i made a secreenshot of titanium backup screen but i cant upload it to the post
so i dont know what a did wrong this time
many thanks for your help

hi..
Format the sdcard and try partitioning using minitool..

thank for your reply
can you tell me if i put this on minitool
partition fat 32: 13gb
ext 2:1.5gb
ext 3:200mb will it work? and if i have to enter commande mkfs.vfat/dev/block..
in terminal emulator
now i m using kyrillos 5.5

The partition should be ext4 and you won't require 1.5gb for apps.. Make an ext4 partition of 512mb or 1gb and the second partition fat32 .. swap partition isn't necessary
also make sure that both partitions are primary ..
And you won't have to enter any command in terminal emulator..

Ok very thankful for your reply i will try tomorow
Sent from my GT-I5800 using XDA App

You're welcome

hello again
i tried your solution but still not working i explain: i formated my sd card using gparted live cd and external card reader then i made 2 partition: fat 32(13.95) and ext4 (1gb) both as primary then i shutedown my phon put sd card on it and the phone didnt boot(bootloop during 10 min) so i removed the battery removed sd card i copied the content of the reportery sdcard present in the kyrillos 5.5 zip and still not bootin , so i removed again the battery and sd card then the phone starts without the sd card and when i put the sd card and when i go the titanium backup its shows me a prtition with 14.9
any suggestion please

Does it show a field named app2sd in titanium? If yes, what is the size of it ?
Also let the phone boot with the sdcard in.. It sometimes takes a very long time on the first boot..

no its not shoing its, do you think that if i try to reflash with kyrillos rom may be it ll work

leper-messiah said:
no its not shoing its, do you think that if i try to reflash with kyrillos rom may be it ll work
Click to expand...
Click to collapse
Reflashing could help but do that only if you're sure that you've partitioned the sdcard correctly

i tried to boot the phone with sd card in but its freez on boot after about 15 min
this is my partitions:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and this is what i m getting with titanium back up

The partitions are correct.. try reflashing with sdcard In ...

Tried but the phone wont boot toll i remove the sd card i dont know what wrong
Sent from my GT-I5800 using XDA App

Any idea of what going wrong
Sent from my GT-I5800 using XDA App

leper-messiah said:
Tried but the phone wont boot toll i remove the sd card i dont know what wrong
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Which version of app2sd are you using?? And do you have CWM recovery?? If yes, then boot into recovery with SD card in. Then wipe data. And reboot. If it doesn t boot, again goto recovery and wipe data. Keep doing it few times till it boots. The first boot will take longer time.

I use kyrillos rom 5.5 but as i said i cant use cwm because my volume up and down are out so i cant navigate throught the menu
Sent from my GT-I5800 using XDA App

leper-messiah said:
I use kyrillos rom 5.5 but as i said i cant use cwm because my volume up and down are out so i cant navigate throught the menu
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Hmm. Then boot up first. Then insert SD card. And then do factory reset by going into settings=>privacy. Do this a few times till it boots. Doing factory reset also wipes data. So this should also work(theoretically).

Will try this just one thing should i flash the ketnel too
Sent from my GT-I5800 using XDA App

leper-messiah said:
Will try this just one thing should i flash the ketnel too
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Kernel?? Why ?? Kyrillos v5.5 come with Fugumod 2.4 beta3 standard edition.

Yes i guess and how zbout fs.convert should i put in fugmod directory
Sent from my GT-I5800 using XDA App

[Q] Been trying everything to create ext4

Hi folks,
I hope somebody can help me out here.
I want to create the ext4.
I tried whole evening and read so much. Getting desprate
I tried:
- In Minitool: ext4. Does not work, every time I boot (I have K7-OC with G3mod kernel ) my phone is in a bootloop?
- via USB connection and minitool: I get &é"'é"'("("§" signs and both partitions are damaged.
- EASUS 9 is not capable of ext4 for now.
- Formatting in (G3mod) clockwork, it creates an ext3, wich is not enough
I tried the Fugumod kernel for formatting, but this one hanged every time.
It's quite crazy because I managed to create the ext4 by formating in G3mod CWM and format to ext4 in minitool. Suddenly I could see it in Titanium:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But stupid me, I forgot to remove the SD card when reflashing the K7 rom, and the partition was damaged. (is this a bug). But now at least I know this is why my phone was blocking everytime, because of a damaged ext partition.
So, can anybody give me advice or tell me how to get finaly a ext4???

Godyn said:
Hi folks,
I hope somebody can help me out here.
I want to create the ext4.
I tried whole evening and read so much. Getting desprate
I tried:
- In Minitool: ext4. Does not work, every time I boot (I have K7-OC with G3mod kernel ) my phone is in a bootloop?
- via USB connection and minitool: I get &é"'é"'("("§" signs and both partitions are damaged.
- EASUS 9 is not capable of ext4 for now.
- Formatting in (G3mod) clockwork, it creates an ext3, wich is not enough
I tried the Fugumod kernel for formatting, but this one hanged every time.
It's quite crazy because I managed to create the ext4 by formating in G3mod CWM and format to ext4 in minitool. Suddenly I could see it in Titanium:
But stupid me, I forgot to remove the SD card when reflashing the K7 rom, and the partition was damaged. (is this a bug). But now at least I know this is why my phone was blocking everytime, because of a damaged ext partition.
So, can anybody give me advice or tell me how to get finaly a ext4???
Click to expand...
Click to collapse
Remove app2sd script from /system/etc/init.d folder.. Then use data2sd ..
Sent from my GT-I5800 using Tapatalk

Thx for your quick reply.
Some Q:
- How is that different?
- Where to download? (installin in the init.d ?)
- Make partitions? How? ext4?
- Will it solve the fact that the ext4 partition locks the phone at startup (not everytime it seems)
Do you know link2SD app? I think this could be a solution? Since the app2sd only copies the data, not Dalvisk?

Godyn said:
Thx for your quick reply.
Some Q:
- How is that different?
- Where to download? (installin in the init.d ?)
- Make partitions? How? ext4?
- Will it solve the fact that the ext4 partition locks the phone at startup (not everytime it seems)
Do you know link2SD app? I think this could be a solution? Since the app2sd only copies the data, not Dalvisk?
Click to expand...
Click to collapse
1. what do u mean by BLOCKING UR PHONE everytime??
2."where to download??" downlod what??
3.1st partition ur sd via cwm .. u can try g3mod1.6 .. it wld b ext3 partition.. then convert it to ext4 via fs.convert
Code:
mmcblk0p2 ext4
4.yes.. it should.. )
i would say u should make a swap partition along mmcblk0p2 too..
edit: there a nice app for g3mod kernel .. u can use it to convert ur secondary sdcard partition too.. )

ranadip.bswas said:
1. what do u mean by BLOCKING UR PHONE everytime??
2."where to download??" downlod what??
3.1st partition ur sd via cwm .. u can try g3mod1.6 .. it wld b ext3 partition.. then convert it to ext4 via fs.convert
Code:
mmcblk0p2 ext4
4.yes.. it should.. )
i would say u should make a swap partition along mmcblk0p2 too..
edit: there a nice app for g3mod kernel .. u can use it to convert ur secondary sdcard partition too.. )
Click to expand...
Click to collapse
thx mate,
- I think I go for link2SD, it's to complicated for me to check that all out.
- To be clear: I have ext4 now in minitool, and it stays there. When taking the SD card out and into the cardreader. Only thing is, my phone keeps rebooting for ever with the SD in the phone.
- I read that a swap slows your phone? I only have a class 4 card.
- What app do you mean for g3mod kernel?

Godyn said:
thx mate,
- I think I go for link2SD, it's to complicated for me to check that all out.
- To be clear: I have ext4 now in minitool, and it stays there. When taking the SD card out and into the cardreader. Only thing is, my phone keeps rebooting for ever with the SD in the phone.
- I read that a swap slows your phone? I only have a class 4 card.
- What app do you mean for g3mod kernel?
Click to expand...
Click to collapse
Ur ext4 partition is corrupted..
Here is my solution..
Flash g3mod1.6... Go to recovery.. Format ext partition.. U r done..
Sent from my GT-I5800 using Tapatalk

ranadip.bswas said:
Ur ext4 partition is corrupted..
Here is my solution..
Flash g3mod1.6... Go to recovery.. Format ext partition.. U r done..
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Thx mate !
Wonderful to get so much help here!
I just have it flashed
For now I use the combination of Link2SD and a2sd. (with fat32)
This works good for now. I have 50Mb free.
I will partition later if I get probs this way, because I installed all programs again (must be the 20th time I do this, last weeks, due to crashes and experimenting)
Let's keep the fingers crossed ;-)

Godyn said:
Thx mate !
Wonderful to get so much help here!
I just have it flashed
For now I use the combination of Link2SD and a2sd. (with fat32)
This works good for now. I have 50Mb free.
I will partition later if I get probs this way, because I installed all programs again (must be the 20th time I do this, last weeks, due to crashes and experimenting)
Let's keep the fingers crossed ;-)
Click to expand...
Click to collapse
K np.
Sent from my GT-I5800 using Tapatalk

So, at least with Kyrillos 6.x I had successfully made my partitions, used them.
Then I just flashed Kyrillos7.0 following the instructions included, now I have full working ext2 and ext3 partitions.
That should work for you guys too, if not maybe the problem is not the phone, nor the ROM, nor the kernel...

Hybrid data2sd

Dear all,
I want to know what exactly hybrid data2sd do..? I m using kyrillos rom v8.2.1 which have this features...
How would I know that its working on my device although I enabled it...
Because at first my internal free space was 120mb but now its reducing cause I m installing app although I transfer them to sd card
Need help here...
Thanks
Sent from my GT-I5800 using XDA App

HI, our dear friend Smonic has already explained it elsewhere at : http://forum.xda-developers.com/showpost.php?p=18715192&postcount=6
You can install Kmapp.apk , it will give u lots of options to fiddle around with hybrid data2sd, app2sd etc.
HOpe it helped, thanks smonic if it did.

still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..

hadi_xman said:
still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..
Click to expand...
Click to collapse
anyone can help me on this...??

install android assistant.
it shows the space, so you can see what apps are on phone and on sd

hadi_xman said:
still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..
Click to expand...
Click to collapse
You can check it in Terminal Emulator typing
cat /data2sd.log

hadi_xman said:
still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..
Click to expand...
Click to collapse
1. do you have partition on sd card?
2.did you copy Android folder to root of sdcard and owerwrited
it?
3.did you set in titanium backup to restore backups to internal?
and try KMapp to check out if hd2sd is ticked in app....
and under hds2d settings in KMapp check if you have ticked following:
app, log, dalvik cache..under dalvik cache there are few options what to move....and remeber: it is important that you copy this folder(Android) to root of ur sdcard...
http://db.tt/b5ahm2zW
unzip it to sdcard and owerwrite it....
screenies of KMapp:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good luck
edit: here's the link to KMapp thread:
http://forum.xda-developers.com/showthread.php?p=18388711
Sent from my hybrid g3
Kyrillos 9.0 powered by
g3mod 2.1 b2 OC

Using root explorer go to /Data/app it show you used and available space on sd ext partion on top left corner.if you go to /Data only it show you internal free and used space.

koko008 said:
You can check it in Terminal Emulator typing
cat /data2sd.log
Click to expand...
Click to collapse
I got this when I enter the command you said.. Check screen shot...
Sent from my GT-I5800 using XDA App

You need to put a space between the command "cat" and the file "/data2sd.log" so that it reads "cat /data2sd.log"

tbschommer said:
You need to put a space between the command "cat" and the file "/data2sd.log" so that it reads "cat /data2sd.log"
Click to expand...
Click to collapse
Yeah its working now it said hybrid data2sd is enabled..
Sent from my GT-I5800 using XDA App

using hybrid2sd
installed 75 apps
still my internal storage is 123mb
yippee
thnq guys

austin266 said:
using hybrid2sd
installed 75 apps
still my internal storage is 123mb
yippee
thnq guys
Click to expand...
Click to collapse
Yep its great...enjoy don't forget to push thanks..
Sent from my GT-I5800 using XDA App

Hybrid data2sd..
hi i am using Kyrillos 9.3 wit g3mod 2.2. I enabled hybird data2sd and checked to terminal emulator..its enabled.. And i partition 512mb also using cwm .. bt when i install new apps its not directly installed in external memory its installed in internal memory(drains space..) then if possible of moving to sd apps only i can move..!
pls tell me how to enable hybrid data2sd.?

bashe1920 said:
hi i am using Kyrillos 9.3 wit g3mod 2.2. I enabled hybird data2sd and checked to terminal emulator..its enabled.. And i partition 512mb also using cwm .. bt when i install new apps its not directly installed in external memory its installed in internal memory(drains space..) then if possible of moving to sd apps only i can move..!
pls tell me how to enable hybrid data2sd.?
Click to expand...
Click to collapse
what r u saying is first u enable hybrid app2sd after that u make partition..?
it very simple just follow this STEP BY STEP... which Kyrillos said..
Optional, Enable Hybrid Data2sd [More space for apps!]
- Make a backup of your sdcard, enter CWM recovery and go to Miscellaneous => Partition SD Card. Choose the sizes you want (Recommended:512-1Gb ext, and 0mb swap]. After the partition completes, wipe data and reboot. You can now copy back all your sdcard files which you did a backup.
- Then copy the contents of the sdcard folder in your sdcard and reboot. No wipe data required, the first reboot may take time.
- Install titanium and go to titanium backup's preferences, and select Restore Backups to => Internal Storage. Then do your restore...

hadi_xman said:
what r u saying is first u enable hybrid app2sd after that u make partition..?
it very simple just follow this STEP BY STEP... which Kyrillos said..
Optional, Enable Hybrid Data2sd [More space for apps!]
- Make a backup of your sdcard, enter CWM recovery and go to Miscellaneous => Partition SD Card. Choose the sizes you want (Recommended:512-1Gb ext, and 0mb swap]. After the partition completes, wipe data and reboot. You can now copy back all your sdcard files which you did a backup.
- Then copy the contents of the sdcard folder in your sdcard and reboot. No wipe data required, the first reboot may take time.
- Install titanium and go to titanium backup's preferences, and select Restore Backups to => Internal Storage. Then do your restore...
Click to expand...
Click to collapse
hey very thanks dude.. i did all things u told below.. bt Titanium back's preferences there is option for General setting, backup setting under that backup folder name,normal apps,protected apps,marketlink, max backup history, compression.
and under the restoration settings..there is a app installer mode, force to same loaction..
and finaly batch mode setting..
which can i select.. pls tell me..
Thank u very much dude.. now working good... i installed 50apps still i have 132mb free internal ... its awesome... thanks again dude...:*

Thanks for all explanations it solved my problem

iksrats said:
Thanks for all explanations it solved my problem
Click to expand...
Click to collapse
great dont forget to hit thanks... *wink

How to unpartition?
Hi, I used kyrillos rom before I installed cm7 a7 and in kyrillos I enabled HD2S and partitioned my sdcard with 512mb, after some time I installed a fresh copy of cm7 from odin, and my sdcard still has a maximum of 6.9GB instead of 7,4gb so i was wondering if there is a way to restore my sdcard to it's previous state?

A Little Help Plz
I installed kyrillos 9.0....
Updated to v9.5....Successfully!
Copied the four files necessary for HYBRID DATA2SD to my sd card
Went into cwm nd partitioned my sd card ..... successfully!
Installed Titanium Backup which shows the partition (a2sd)
went into terminal evaluator which shows hybrid data2sd script running
But still whenever i install apps, my internal memory gets low ???
I installed Kmapp also and have HYBRID DATA2SD enabled with "app, dalvik cache & log" checked
What did i do wrong?
Remedies please..
Thanks In advance

NativeSD Rom+EXT4 for New Users with peechurs

By now a lot may already know this by now
NativeSD Rom Boot Script for HD2
http://forum.xda-developers.com/showthread.php?t=1869673
many-many thanks to the devs & guys that gave us this!
But there are still a few out there that are new to this so here is what i did to make it simple to follow.
What's it about anyways, here one good answer from samsamuel
samsamuel said:
standard sd android runs from an image on the fat32 partition that pretends to be a file system, nativeSD actually installs to the EXT partition, and the phone/android treats it as a real filesystem. its the same as installing to nand, except as fast as or faster (assuming you have a nice fast card,) than nand, and it keeps the read/write pressure off the nand memory, reducing the potential for bad blocks.
Click to expand...
Click to collapse
what you need:
- a good fast SD card, size depends on your needs (i tried a 4g Kingston that took forever to load, it could be fake/ damaged)
- MiniTool Partition Wizard Home Edition 7.6
- Download 4EXT Recovery from here. this is where the magic starts, thanks Xylograph/ securecrt
- for multi-ROM selection , thanks datagr
- for NativeSD Touch Recovery, backup & restore thanks tytung
- How not to Google Play when using diffrent roms so as not to always go to Google Play
I assume you already have Magldr/ CWM in your HD2 & know your way around the Magldr Menu.
First we need to format the SD card so that it will contain two partitions, ALL DATA WILL BE DELETED. so do a backup/ copy of your card.
- 1 FAT32 primary
- 1 EXT4 primary
Be very careful when using the minitool partition as you can accidentally format/ delete your Hard Disk Partition.
Insert you SD card to your PC & run minitool partition, something like below will show. Make sure you select the right drive.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Right click on the drive & choose "delete" then apply the changes, Again make sure it's the right drive! You now have an "unallocated" partition.
right click on the drive again & choose "Create New Partition" & change the dropdown boxes as the options below. Now move the mouse to the end of the "Size and Location" table. click & hold then move to the LEFT to leave a space for the EXT4 which will be done latter. Size will depend on how many Roms yo plan to use & how many apps you plan to install. Click OK.
right click on the drive again that has the "Unallocated" space & choose "Create New Partition" & change the dropdown boxes as the options below. Remember it should be Primary & EXT4. Click OK
Click Apply & when it's done you should have 1 FAT32 & 1 EXT4 Partition
Another method of creating an EXT4 partition
3a Use the provided 4EXT recovery (NAND or SD version) to create the partitions and format them.
Click to expand...
Click to collapse
copy the "TOUCH" or "TWRP" or "RECOVERY" folder your SD Card (they all do the same thing)
no need to copy the others for now as it will be erased when you create/ format the EXT4 partition
Magldr > Service > Boot Setting > AD SD Dir > TOUCH
& this should run, Tap on Advance
Tap on Partition SD card
Ext size. = press the + sign to go up, swap size is 0 & make sure to select EXT4 then tap Partition
this is what info you can see using the "Recovery" Folder method
Magldr > Service > Boot Setting > AD SD Dear > Recovery (folder must be in SD root)
Time to Flash!
Magldr > Service > Boot Setting > AD SD Dir > TOUCH
Tap Install, notice that the compatible ROMS for this methoid have a div2 or NativeSD designation, tap on the ROM you want to flash.
Make SURE the ROM you Tap is the correct one
if you made a mistake tapping the incompatible ROM it will not go the Aroma installer but immediately will be flashed to NAND - erasing what ever you had there!
Install to SD-EXT
wait for it then your Done!
Magldr > Service > Boot Setting > AD SD Dir > NATIVESD
Run NativeSDBoot.apk, tap on whatever ROM you wan to BOOT to then re-start.
HTH
& BTW don't forget to hit the Thanks Button for the Dev's & Guys who made/ ported those ROM's to become NativeSD :highfive:

that's very helpful !:good:

chuchuanming said:
that's very helpful !:good:
Click to expand...
Click to collapse
just hit the thanks button if you find it helpful :highfive:

Thanks you very much!!!

securecrt said:
Thanks you very much!!!
Click to expand...
Click to collapse
No sir, it's Thank You, Xylograph & rest of the Guys!!! :good:

Hi,
I've done all the things in the guide and my question is, why does it go smoother and faster on my 8gb class 2 card than the 32gb class10 card?
thx and sorry for my bad english xd

I can't find softkeys
Hi I have installed on native sd the "PARANOID ANDROID LEO BETA V2.00" rom (thank to the developers for the great job) everything I've tested works fine but i can't enable sofkey i need them becouse my hard back button doesn't work very good. Can anybody help me? thanks

@alexdenied
try setting > system > navigation bar > tick

hitutsu829766 said:
Hi,
I've done all the things in the guide and my question is, why does it go smoother and faster on my 8gb class 2 card than the 32gb class10 card?
thx and sorry for my bad english xd
Click to expand...
Click to collapse
could by the way it was formated or the size of cluster used? some card specs are fast in some work task but now all maybe like read-write, copy-transfer etc.
anyways just use whatever works best for you

Will add this link to a few OP on LNE TEAM threads
Thanks my friend
Sent from my GT-I9100 using Tapatalk 2

Has anyone ported tytung's nexusHD2 ics v2.7 to nativesd? I'd like to try this rom by this new method. Thanks.
Sent from my HTC HD2 using Tapatalk 2

wis1152 said:
Will add this link to a few OP on LNE TEAM threads
Thanks my friend
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Your very welcome sir!

I installef 2nd rom on ext4 and got bootloop? Which step am i missing?
Thanks
Sent from my NexusHD2 using Tapatalk 2

please give more info on your set up
which 2nd rom did you flash? ext size? recovery or touch?

what is the difference between the recovery files for SD (cwmtouch, cwr, twrp)?
can you also please make a tutorial on how to make multi boot using the recovery method, texts tutorial would be fine
thanks

mengfei said:
please give more info on your set up
which 2nd rom did you flash? ext size? recovery or touch?
Click to expand...
Click to collapse
Ext4 3gb free >2gb, i flashed cm9ite v1.1b as 2nd using ext4 recovery sd as i flash fisrt rom PA v2. Do i need to do some extra steps or install any extra apks? Iam using marldr and android on Nand.Thanks
Sent from my NexusHD2 using Tapatalk 2

amateur_no1 said:
Ext4 3gb free >2gb, i flashed cm9ite v1.1b as 2nd using ext4 recovery sd as i flash fisrt rom PA v2. Do i need to do some extra steps or install any extra apks? Iam using marldr and android on Nand.Thanks
Sent from my NexusHD2 using Tapatalk 2
Click to expand...
Click to collapse
where did you get cm9ite v1.1b?
as i sew this is the one that's available
CM9ight_leo_v1.1a_div2.zip - mirror (Flash via recovery)
md5: 6fff65279a80b4e06d5dbc7f14aa7ccf
Click to expand...
Click to collapse

mengfei said:
where did you get cm9ite v1.1b?
as i sew this is the one that's available
Click to expand...
Click to collapse
Sorry i got wrong typing. Cm9ite v1.1a.
Sent from my NexusHD2 using Tapatalk 2

I just flashed CM10 just now using EXT4Recovery on SD, no problem here. Try to DL the file again it might be a corrupted zip or try to see the md5 if they match.
=====================================================================================================================
bleui said:
what is the difference between the recovery files for SD (cwmtouch, cwr, twrp)?
can you also please make a tutorial on how to make multi boot using the recovery method, texts tutorial would be fine
thanks
Click to expand...
Click to collapse
AFAIK those are just the same ROM manager/ Recovery loaders but from different dev's or you can use either if your keys are not functioning twrp(team win recovery project). for multi boot just use the app "NativeSDmultiboot" in the first page, it will be like the one attached.

mengfei said:
I just flashed CM10 just now using EXT4Recovery on SD, no problem here. Try to DL the file again it might be a corrupted zip or try to see the md5 if they match.
=====================================================================================================================
AFAIK those are just the same ROM manager/ Recovery loaders but from different dev's or you can use either if your keys are not functioning twrp(team win recovery project). for multi boot just use the app "NativeSDmultiboot" in the first page, it will be like the one attached.
Click to expand...
Click to collapse
I meant, how to install multi ROM with recovery method. do you just boot to the recovery folder and install another ROM.zip? or use the NativeSDmultiboot apk and then install from there?

[KERNEL][STOCK GB 2.3.x] 14-12-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU

[KERNEL][STOCK GB 2.3.x] 14-12-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
Presenting users of stock roms and stock-based custom roms for S5830(Galaxy ACE),
PSN>> kernel
Features:
1: Compiled from Battery Extender 1.5.1 sources. (thanks to LibiSC)
2: Memory Mod applied (thanks to Doc_cheilvenerdi.org)
3: Swap enabled
4: Optional OC suport (max 960MHz)
5: Default ondemand CPU governor
6: Default deadline I/O scheduler
7: Kernel has inbuilt support for ext3, ext4, cifs filesystems (no kernel modules needed for these)
8: SU binary and apk updated to v3.1.1
9: a2sd suport completely removed from kernel to avoid any interference with memory mod
10: Rest same as in Battery Extender 1.5.1 kernel
Also available nims kernel with memory-mod applied & noswap/swap/swapall versions, OC supported. (thanks to nims11)
also BatteryExtender v1.6 mem-mod swapall-v3.0 OC supported available! (14-12-2012)
also BatteryExtender v1.2 mem-mod swapall-v3.0 SuperSU-0.99 supported available! (03-03-2013) (UNTESTED COZ NO ACE ANYMORE )
also Space Kernel v4 mem-mod swapall-v3.0 SuperSU-v1.20 supported available! (03-03-2013) (UNTESTED COZ NO ACE ANYMORE )
REGARDING publishing sources of these kernels: it is completely same as the sources posted by LibiSC BatteryExtender 1.5.1 & nims stock OC kernel on github; I haven't made any changes in it whatsoever.
Note:
1: sdext has to be formatted in ext4 only
2: Do not install a2sd or link2sd...or even any other init.d script for memory extension like armurulz script. You will fall into problems.!
3: The original data on internal /data is not moved onto the memory card partition mounted as /data.
4. The memory card sd-ext partition will be used unless phone is switched off and will not be unmounted during USB MASS Storage(only the fat32 partition will be unmounted; ie normal mass storage works perfectly).. BUT, you can physically remove your memory card (safely) only when phone is switched OFF.
5. When installing apps via apk or google play, they will be moved to sdcard by default(native android app2sd)... so if u want ur phone to always move future apps to be installed in the vast internal storage, do following in android terminal app or adb shell on PC:
su
pm setInstallLocation 1
Q.) What is this MEMORY MOD ??
A.)
Users of fast scards (class 6 or above recomended) can utilise their second sdcard partition (sd-ext) as phone's internal storage (/data) without any link2sd/a2sd/other init.d scripts.
If your sdext partition is 1GB wide, your phones internal memory (/data) will be 1GB wide.. tension free installation & use of apps.
How does it Work:
Scenario 1:
I switch on the Phone, without a MicroSD slotted in or with a microSD with a single FAT32 partition (broken or damaged microSD also suite this scenario...); GingerBread boots as usual!
No Difference!
Pure stock rom flashed via odin(rfs) or stock-based custom roms(ext4) supported.
Scenario 2:
I switch on The Phone with a microSD slotted in (with the second partition formatted as EXT4 filesystem but still EMPTY); Ginger boots acting as if
/data
is completely moved outside to microSD but just WIPED (not true obviously, and the original /data is safe inside the phone), so it resettle it from beginning...
Scenario 3:
I switch on the Phone with the second partition of the microsd (EXT4) up and running (already resettled up for use and with my userdata on it); Ginger simply boots with sdext as /data on microSD with your userdata there and tons of apps just installed from the market...
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MEMORY-MODDED SwapAll v3.0 kernels:
1: Original Internal Storage (/dev/stl13) is formatted to be used as swap partition entirely so as to fully take advantage of fast internal data partition and relieving read/write load on memory card.
3: The third swap partition on memory card created using CWM or MiniTool or Gparted (/dev/block/mmcblk0p3) IF FOUND is used as swap space, with lower priority . So it will be used for swapping only when above mentioned swap partiton on internal data storage is full.
4: Swappiness set at 30 here.
5: after flashing this kernel you wont be able to directly do a nandroid backup in cwm; so format(wipe) "/data" in recovery before attempting nandroid backup.
6: if you want to revert to any other mem-mod kernel then flash PSN_EXT4_Recovery_based_DATA_ONLY_Format_Tool-signed.zip before flashing other mem-mod kernel, thats it !
7: if you want to revert to other non-modded kernel, just do a factory reset using this tool (PSN_factory_reset_EXT4_Recovery_based_Format_Tool-signed.zip) and you need to setup all again.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note:
1: Highly recomended for use on fresh installation so that 120-160 MB of free space is available at internal /data storage for swapfile; else u can use INTERNAL DATA STORAGE formatting tool provided.
2: You can easily switch between any swapall kernels but with formatting ONLY the INTERNAL DATA STORAGE using provided tool so as to ensure swapall working.. no need to wipe anythng else
3: All Memory-mod kernels are interchangeable; but swap configurations are different !
4: Swapall versons will take approx 5-10 seconds more to boot becuse of swapfile creation on boot ! Later on its quite fast !!!!
5: Nims swapall v2.0+ kernels have bootanimation working !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD SECTION:-
SWAPALL v3.0 KERNELS:
Battery Extender 1.5.1 swapall v3.0(PSN-edited S2 bootanimation with small size)
Nims GB kernel swapall v3.0 (PSN-edited S2 bootanimation with small size)
Battery Extender 1.6 swapall v3.0
06-11-2012 Nims STOCK GB mem-mod swapall-v3.0 with new bootanimation & SuperSU 0.97 inbuilt
06-11-2012 BatteryExtender 1.5.1 STOCK GB mem-mod swapall-v3.0 with new bootanimation & SuperSU 0.97 inbuilt
(THANKS TO CHAINFIRE)
this will replace Superuser.apk(v3.1.3) and its corresponding su binary with SuperSU(v0.97) and its needed su binary
CWM / RZ RECOVERY BASED FORMAT TOOLS:-
[Thanks to chainfire & Ketut P. K. for their works]
EXT4(non-journalling) format tool to format /data /cache & /sdext to ext4 filesystem (factory reset)
EXT4(non-journalling) format tool to format internal /data only to ext4 filesystem
EXT4(non-journalling) format tool to format only sd-ext to ext4 filesystem
EXT4(non-journalling) format tool to format ALL including /system (but not /sdcard) to ext4 (TARGETED AT ROM COOKS)
Script available to clear dalvik-cache on sd-ext in case of any problem (just in case)
Script available to remove apps2sd (a2sd) & other interfering init.d files from an installed rom :highfive:

Some Tips
-: TIPS for faster responsiveness & performance :-
1: If your /system has enough free space, use it to move system dalvik-cache elements to ROM using Titanium Backup Pro. This will help in quick response to open system apps like contacts, sms, phone dialer etc.
2: If your /system still has enough free space, use it to move your "most frequently used" user-app into ROM using "convert to system app" option in Titanuim Backup. Now, some apps may not work when moved into rom (example=quickpic), then you can move it to /data again by "convert to user app". Because ROM (/system) has faster read speed, apps installed in it will open faster.
3: NOW ADRENALINE ENGINE v4.3 & v4.4 COMPATIBLE WITH MEMORY-MOD KERNELS AVAILABLE ! see here >> STOCK ROM PAGE

This is Much Needed Amazing Job!

Whoa amazing.. will try this as soon as it finishes uploading
Sent from my GT-P6200 using Tapatalk 2

psndna88 said:
8: SU binary and apk updated to latest v3.1.1[COLOR]
Click to expand...
Click to collapse
Latest SU binary and apk version is 3.2 and not 3.1.1
Gesendet von meinem ADM816HC mit Tapatalk 2

confused ...
Mardon said:
Latest SU binary and apk version is 3.2 and not 3.1.1
Gesendet von meinem ADM816HC mit Tapatalk 2
Click to expand...
Click to collapse
on checking updates via superuser app, it shows 3.1.1 as latest to me ...

Mardon said:
Latest SU binary and apk version is 3.2 and not 3.1.1
Gesendet von meinem ADM816HC mit Tapatalk 2
Click to expand...
Click to collapse
3.2 is only for ICS and JB as of now.

This Kernel install the CWM or its like the Libsc kernel we have to install?

Awesome thank you very much for sharing your work

The.Keeper said:
This Kernel install the CWM or its like the Libsc kernel we have to install?
Click to expand...
Click to collapse
cwm has to be installed seperately before flashing this kernel

psndna88 said:
cwm has to be installed seperately before flashing this kernel
Click to expand...
Click to collapse
Thank You, i'll trie

Guys let me know how did it work for you..
Releasing deodexed xwktq custom rom soon....
Sent from my GT-S5830 using xda app-developers app

this is what i was looking for, now ... i need to get me a class 10 card ... that should work fine right ???

Yes absolutely.. Im on sandisk 16gb class 6!!
Sent from my GT-S5830 using xda app-developers app

psndna88 said:
Yes absolutely.. Im on sandisk 16gb class 6!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
excelent! thnx for the info...

psndna88 said:
Yes absolutely.. Im on sandisk 16gb class 6!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
what about if i have Class 4?

Well technically anyone with a partitioned memory card can use it, no limitations... But class 6 or higher is recomended to for avoiding slow boot times and slow read/writes from memory card....
A CLASS 4 user can try this without issues other than slower speed.
Sent from my GT-S5830 using xda app-developers app

Everything working fine but theres one thing wrong, im not sure whether its rom problem or kernel, when i use apocalypse, my battery doesnt go down when i sleep but when i use this, when i sleep, its drain my battery.
Sent from my GT-S5830 using Tapatalk 2

muiz15 said:
Everything working fine but theres one thing wrong, im not sure whether its rom problem or kernel, when i use apocalypse, my battery doesnt go down when i sleep but when i use this, when i sleep, its drain my battery.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Change to smartassV2 cpu governor using no-frills cpu control and test...
Sent from my GT-S5830 using xda app-developers app

Why dont you change the default cpu governor to SmartassV2 coz most people use that.