Database Users

[Video] Best playback on Xperia

I think it's about time for us to clear a few things up concerning video playback on the X1.
The X1 can play most codecs using Coreplayer Mobile.
However, to optimize video's for the X1 and windows media player, a converter such as SUPER can be used.
Please note that optimizing your X1 is advised. See this thread for more information.
Now what I would like to find out is what settings work best for the X1 to playback video with a few different preset configurations.
What we need to know is the optimal:
Resolution
Framerate
Video Codec
Video Bitrate
Audio Codec
Audio Bitrate
Audio Sampling Frequency
Container
And any other/better tools to use.
To be able to better compare results I've uploaded the Crysis Warhead HD Trailer. You can download it here.
Please use this trailer to compare and post your settings in this thread.
This thread will be updated with new information as it arises. The second post contains an example of settings I used and will be updated with user posted settings that work well.
--- Important information ---
* CorePlayer is not hardware accelerated. This means that CorePlayer is more likely to play your video's choppy. The built-in media player, however, does have hardware acceleration. To get the best video performance, at this moment the built-in media player is your best choice.
* The h.264 codec is supported by the built-in media player and currently has the best compression vs quality ratio.
--- Downloads ---
Coreplayer Mobile
SUPER

--- Source file ---
Setting: HD Quality - 63.4MB @ 0hrs, 1min, 32sec.
Resolution: 1280 x 720
Framerate: 30
Video Codec: WMV9
Video Bitrate: 6090 kb/s
Audio Codec: WMA9
Audio Sampling Freq.: 44100
Audio Bitrate:: 96 kb/s
Container: WMV
Download example here: Source file
--- Settings --- Here the optimal settings will be provided as they become available.
Configuration: Low Quality - 4.7MB @ 1min, 31sec. (+- 280MB for 1.5hrs of movie)
Resolution: 400x240
Framerate: 25
Video Codec: h.264
Video Bitrate: 192 kb/s
Audio Codec: AAC
Audio Sampling Freq.: 22050
Audio Bitrate:: 64 kb/s
Container: mp4
Download example here: Low Quality
Configuration: Medium Quality - 5.9MB @ 1min, 31sec. (+- 350MB for 1.5hrs of movie)
Resolution: 400x240
Framerate: 25
Video Codec: h.264
Video Bitrate: 384 kb/s
Audio Codec: AAC
Audio Sampling Freq.: 44100
Audio Bitrate:: 96 kb/s
Container: mp4
Download example here: Medium Quality
Configuration: High Quality - 10.4MB @ 1min, 31sec. (+- 620MB for 1.5hrs of movie)
Resolution: 608x368
Framerate: 30
Video Codec: h.264
Video Bitrate: 768
Audio Codec: AAC
Audio Sampling Freq.: 44100
Audio Bitrate:: 96 kb/s
Container: mp4
Download example here: High Quality
Configuration: Highest Quality - 16.8MB @ 1min, 31sec. (+- 1000MB for 1.5hrs of movie)
Resolution: 800x480
Framerate: 30
Video Codec: h.264
Video Bitrate: 1294 kb/s
Audio Codec: AAC
Audio Sampling Freq.: 44100
Audio Bitrate:: 128 kb/s
Container: mp4
Download example here: Highest Quality
---
When posting settings, supply the same information as I do here.

Good you have come up with this.. once we all share I think we can reach to as what best converter settings we can use for X1... After reading lot of material... I use these settings which gives me full screen decent/smooth run movies.. had no problems at all... but don't know if they are the best settings... check it out :
Xvid MPEG-4 Codec, 569 Target bitrate, 23.976 fps, Screen Size 640x384, Sound Mp3 128 to 160 kbit/s. Encoder used : TMPGEnc 4.0 XPress. ( The best converter with total cut/edit features )
Let me know the results.

Nero Recode 3
AVC in MP4, 400x240, ~400kbps
HE-AAC, ~80kbps,
Runs excellent in the Mediapanel and did quite good (but worse) in the Coreplayer 1.2.5, when I still had it installed. Switched to the Panel completely for playing back my mp4 rips.
Uh, theres a template. Well then, again:
Resolution 400x240
Codec AVC/h.264
Framerate 25 or as source if lower
Video Bitrate ~400kbps
Audio Sampling as source
Audio Bitrate HE-AAC, ~80kbps

I have tried so many diff combination but still haven't found one optimal to use with the x1. This thread will be great for me to do more testing. I usually super or aimersoft. Please chime in if you use those above software to encode video.

I'm at work right now so can't be 100% sure, but as I remember (it's discussed in threads in the main SE X1 forum section) for the highest quality you can get on x1, encode the files for Baseline 1.3 h264, 800x450 max resolution, 30fps, and play them on wm media player or the media panel.
Videos will not run well at anything near that resolution on core player or tcpmp, they don't use the hardware acceleration that's available to media player and the media panel, although tcpmp and coreplayer will handle many more codecs.

Thanks for the additions people, I've uploaded a better video file to test with. It's HD by default so you can actually see the difference between high quality encoded and low/medium.
For those who post configurations, please (please!) stick to the template, I will try and reproduce the settings so I can judge them and add them to the topic.
I would like more information on the hardware acceleration topic as well;
1) Why isn't coreplayer hardware accelerated?
2) Can it be changed so it is?
3) Are there any other/better video players out there?

Because the driver specifications are not available and the hardware cant be accessed by third party programmers
CorePlayer team said in their forum they got hold of Qualcomm and are working to provide hardware acceleration for any MSM7xxx chipset having the graphics hardware in one of the next builds of the player
Better regarding what aspect?

Thanks for your reply. I'd like to see what CorePlayer can do if they manage to get the hardware acceleration working.
Better regarding smooth playback and codec support. Perhaps there's a way to add codecs to the Winmo media player?
EDIT: Updated with new configurations, all based on h.264 (for best compression/quality ratio)
EDIT2: Added another setting, tested for quality and uploaded all examples for your viewing pleasure.
EDIT3: Tested the movies on my X1. From low to high the quality is visibly better every time, so that's a good thing. On the highest quality setting proposed above, the graphics were stunning, however, it ran choppy, it looked like my X1 couldn't keep up with that high bitrate & resolution. I'd like more opinions, who else will test them!? (Tested with windows mobile media player).

Who can help me test the highest settings?

Angelusz said:
EDIT3: Tested the movies on my X1. From low to high the quality is visibly better every time, so that's a good thing. On the highest quality setting proposed above, the graphics were stunning, however, it ran choppy, it looked like my X1 couldn't keep up with that high bitrate & resolution. I'd like more opinions, who else will test them!? (Tested with windows mobile media player).
Click to expand...
Click to collapse
Look at my post (#31) here:
http://forum.xda-developers.com/showthread.php?t=460294&page=4
especially this:
Jabe said:
2.) this one is the important one. Do not change screen resolution. Original file was 624x352 and when I set it to 800x like you suggested the playback was somewhat jerky when people were moving. So I set it to "no cnahge" and gained 2 things:
- output quality was far superior (i don't know about that if you choose smaller resolution, like converting HD to 800x)
- the conversion is much faster. before it took 1h10min, now it takes 45min. in other words, encoding speed went from 0.7x to 1.0x.
Click to expand...
Click to collapse
I think we are talking about the same thing. I've noticed that increasing resolution does cause some problems. I use Media Panel for playing my videos.

I do use the Mediapanel as well, it might be imagination but I found it to be the best player regarding playback performance.
Upscaling a smaller source file in image size will worsen the quality massively. Think about how a codec works: upscaling means making the image look "soft" or "washed out". These soft or washed out images are then used by the codec to predict differencies and/or movements between the frames and then this data is used to render the subsequent frames. Since the whole image (being washed out) figuratively looks "all the same" (its just a soup of different unspecific colours) the codec has hardcore problems predicting movements between the single frames. Thus the prediction is bad, based on an already bad image, multiplies the bad effect onto every subsequent frame.

Display Driver Assist - Does it improve video ?
This is an interesting thread, please let me add my experience of converting and watching video on my Xperia.
Firstly this program DVD Catalyst won the top award for converting DVD to almost any format to any resolution, any bitrate.
Here is the URL : http://www.pocketdvd.ca/products/dvd catalyst 3.html
Here is the URL for SmartPhone Awards list for all the best in catagory software for video coversion for Pocket PC 2008.
http://www.smartphonemag.com/cms/awards/2008/winners_ppc_apps#CatDVD_Converters
If you download the trial of DVD Catalyst you can have 15 days of free fully functional DVD conversions, thats enough to convert almost anybodies collection. I do intend to buy this when I get round to it.
I experimineted with different formats and resolutions and here were my conclusions.
Format - Sony Media Panel seems to like the 3gp format best ( subjective )
Resolution - I use the maximum 800 X 480
Bitrate - 750 kbps though 500 is still very good.
Audio 128 kbps Stereo
All these options can easily be changed in the converter, you can set your PC Processor prioirty to high ( recommended) or highest if you not doing anything else and a complete 2 hour DVD, with high prioirty for processor will be converted and ready for copying to your X1 in about 35 - 40 mins.
Also I found my Xperia settings had an impact on video playback quality, none more so than Glyph cache, which I now have at 128kb.
I am currently experimenting with the " Display driver preloader " you can find on the thread by ell82...http://forum.xda-developers.com/showthread.php?t=462346
In it he uses this file, libgles_cl.dll, copied into the windows directory, to add hardware acceleration to some 3D games. This as close as we have come so far in adding hardware acceleration across the board to all programs on the X1, obviously this needs some testing and benchmarking, something this thread is very good at.
This file does not replace any windows files, you can add it to WINDOWS folder and remove it at will, it doesn't hurt, over right or harm anything.
Im using it on and off, id like to see some hard data on it, it may not be the magic bullet we have all been waiting for, but it could be a move in the right direction.
View attachment 139876

Mark A Cilenti said:
Format - Sony Media Panel seems to like the 3gp format best ( subjective )
Click to expand...
Click to collapse
3GP is not a format, its only a container. The content, video wise, is either SP, ASP or AVC video (mostly, accepts a wide range of codecs though) and audio is AMR or AAC. In fact you don't follow the standard at all, your files are NOT 3GP COMPILANT. Since 3GP is just a simplified version of the MP4 container anyway, of which the latter is more versatile regarding possible content and resolution restrictions, I would definitely abandon 3GP and go for MP4. Of course with AVC video and a flavor of AAC audio.

Maybe noob question (I haven't got an sdhcmicro card so cannot test myself):
On my hx2790 tcpmp (ver 0.72, last version) always worked a treat on default 700-1500mb divx and xvids. You loaded lots of movies on a 8gb card and opened them with tcpmp. Some movies required AC3 sound and there was a plug in for that too. The movies played back 100% flawlessly.
Can we not just do this in the X1?

gold333 said:
Can we not just do this in the X1?
Click to expand...
Click to collapse
no, not yet.

700mb dvd rips run fine in coreplayer, but for fast scenes it lags like hell

Here's what I do:
Open PocketDivXEncoder
Select the 'HD TV' option
Resize to 400xABC (maintain aspect ratio)
Video quality = 70
Audio = max
Coreplayer runs it flawlessly and looks great, even fast scenes.
Watched the first season of both Burn Notice and Merlin with no issues in action packed scenes

totally agreed with coreplayer ! really better than movie player in the XMB Panel !!!! you can find my thread here : http://forum.xda-developers.com/showthread.php?p=3093597#post3093597
Don't know why it is so slow with the XMB Panel & so better in core player !
Core Player : reverserd enginered the chipset.... really difficult thing & to be really/fully optimized but it works better than the std XMB movie player !!!! (written by who ? sony developers or htc ? or together ?, they should buy corecodec ! )

dadeadman said:
700mb dvd rips run fine in coreplayer, but for fast scenes it lags like hell
Click to expand...
Click to collapse
But tcpmp 0.72 doesn't? Tcpmp was the ultimate micro footprint everything player for mobile devices.

Video Playback

So has anyone been able to get a re-encoded video to playback on their atrix? I've been trying every setting I know of, but mvideoplayer says that my phone doesn't support any of them. I've been mostly trying variations of weightb=0:bframes=0:cabac=0:weightp=0:8x8dct=0, which should be baseline H264, but my phone refuses to play it. All my files are being reencoded at 720p, which should be supported, in an mkv container, which according to motorola, should be supported.

I'm going to do some tests and get back to you on this.

If you encode in FFmpeg the videos work fine. Even encoding 1080p videos in FFmpeg works perfectly at 100% frame rate and sound in the videoplayer.
Download VitalPlayer and you can play even stuff the Atrix doesn't support. The framerate and video looks great but the sound will stutter occasionally because it's all software-decoding. Video even worked up to 1080p with software decoding...so that's a pretty big testament to the power of Tegra 2.

My ultimate goal is to be able to play MKVs with high profile H264 and an embedded ASS subtitle file so that I can just drag and drop without having to deal with reencoding all my shows.

edgeicator said:
My ultimate goal is to be able to play MKVs with high profile H264 and an embedded ASS subtitle file so that I can just drag and drop without having to deal with reencoding all my shows.
Click to expand...
Click to collapse
Unfortunately, I think you're going to have to wait until the next generation of phones for that. iirc, Tegra 3 supports that, but I (and Wikipedia) might be wrong on that.
Right now, this is what I'm using (using MediaCoder because I'm a slacker and CUDA is fast and good enough for my needs):
x264/Baseline
Bitrate: Average/2048 Kbps
Level: Auto
B-Frames: 4
Dynamic GOP: on
CABAC: on
Deblocking: on
Resize: 800x480
I'd rather not do the resize (my source material in this case is 1280x720), but I haven't gotten video at 720p to keep up with the audio, even after dropping the bitrate to 1024 Kbps, B-frames to 2, and turning off dynamic GOP.
Anybody else have better luck?

Sogarth said:
Unfortunately, I think you're going to have to wait until the next generation of phones for that. iirc, Tegra 3 supports that, but I (and Wikipedia) might be wrong on that.
Right now, this is what I'm using (using MediaCoder because I'm a slacker and CUDA is fast and good enough for my needs):
x264/Baseline
Bitrate: Average/2048 Kbps
Level: Auto
B-Frames: 4
Dynamic GOP: on
CABAC: on
Deblocking: on
Resize: 800x480
I'd rather not do the resize (my source material in this case is 1280x720), but I haven't gotten video at 720p to keep up with the audio, even after dropping the bitrate to 1024 Kbps, B-frames to 2, and turning off dynamic GOP.
Anybody else have better luck?
Click to expand...
Click to collapse
... The problem being that MediaCoder doesn't respect the "average bitrate" option very much, and it'll often generate files that have twice the "average bitrate" specified.
I've now started poking at Badaboom, which is able to generate 960x540 files (at which MediaCoder couldn't generate working files, for whatever reason). And, for that matter, it can generate 1280x720 files that the Atrix can play just fine (hey, closed source is good for something after all!). The settings I'm using at the moment:
Video Encoder:
Profile: Baseline
Key Frame Mode: Auto
Level: Auto
Rate Control Select: VBR
Bitrate is 2460kbit
Picture Settings:
Display Res: 1280x720

Sogarth said:
... The problem being that MediaCoder doesn't respect the "average bitrate" option very much, and it'll often generate files that have twice the "average bitrate" specified.
I've now started poking at Badaboom, which is able to generate 960x540 files (at which MediaCoder couldn't generate working files, for whatever reason). And, for that matter, it can generate 1280x720 files that the Atrix can play just fine (hey, closed source is good for something after all!). The settings I'm using at the moment:
Video Encoder:
Profile: Baseline
Key Frame Mode: Auto
Level: Auto
Rate Control Select: VBR
Bitrate is 2460kbit
Picture Settings:
Display Res: 1280x720
Click to expand...
Click to collapse
Only problems with Badaboom is that it only works with NVidia cards (fine with me...I own the program and use it frequently) and NVidia updates the program about once a year. The support for Badaboom is horrendous.

hotleadsingerguy said:
Only problems with Badaboom is that it only works with NVidia cards (fine with me...I own the program and use it frequently) and NVidia updates the program about once a year. The support for Badaboom is horrendous.
Click to expand...
Click to collapse
True, there are the restrictions on it, but I was really just pointing out that it's possible to get h.264 videos working on it.
And minor quibble: NVIDIA's not responsible for updates to it. Elemental is.

Video convert atrix 720p
Okay I got this to work on my Mac now given This is a mac... I took a 720p wmv hd movie and opened in quicktime x with flip 4 mac plugin installed. and went to save as... 720p movie... once done it did not play and did not show up with hdmi out I then renamed the file to .mp4 and it played fine on the device with video player and thru hdmi. I am currently converting a 1080p .mov the same way but this time from a 1080p to a 1080p then I will rename .mp4 and see will post results soon.

1080p worked exactly the same!

Got my atrix yesterday, and I'm having some media issues too. Gonna spend the entirety of tomorrow tweaking Megui profiles to make this thing play back content.
So far i have found using rockplayer lite:
720x480 anamorphic (848x480) w/ x264 (q19/unrestricted) and dolby plII aac @ q0.5 plays flawlessly
1024x576 (same settings as above) not so much.
Gonna play with the profiles and such to find what works well...

Sogarth said:
... The problem being that MediaCoder doesn't respect the "average bitrate" option very much, and it'll often generate files that have twice the "average bitrate" specified.
I've now started poking at Badaboom, which is able to generate 960x540 files (at which MediaCoder couldn't generate working files, for whatever reason). And, for that matter, it can generate 1280x720 files that the Atrix can play just fine (hey, closed source is good for something after all!). The settings I'm using at the moment:
Video Encoder:
Profile: Baseline
Key Frame Mode: Auto
Level: Auto
Rate Control Select: VBR
Bitrate is 2460kbit
Picture Settings:
Display Res: 1280x720
Click to expand...
Click to collapse
Is this on badaboom?
I chose a mere 1000kbps, with 960x540 (apple TV profile)
and i get an error playing (rock player plays it fine tho)

that was the settings recomended by bababoom site
but i think they screwed up cause apple tv uses main profile
i think tegra 2 is baseline (what i understood from xoom)
and yup just tried with galaxy S preset (baseline), change size to 1280x720
bitrate 3500kbps, sweet sweet 720p on my atrix

1920x1080p
10mbps also worked
tegra is a beast
Test file:
http://hotfile.com/dl/108279465/e51a41a/goal2.mp4.html

Ah. That was my issue. Changed the encoder profile to Baseline and [email protected] works great. Too bad the baseline profile almost doubles the filesizes from the high profile...

How To: Iconia A500 and Freemake Video Converter

http://www.freemake.com/free_video_converter/?from=app
Extremely simple and easy to use Video converter handling almost any video format known to man.
It even has a built in android preset for making videos work with android devices.
---------------------------------------------------------------------------------------
For anyone who is curious, this is my custom general purpose android preset (Based of the 800x480 Android Preset)
Under the advanced config settings:
1. Framesize: Custom 720x400 (For 16x9 content) 640x480 (for 4x3 content)
2. Choose Video Codec as H.264
3. Custom bitrate as 700 kbps (or 1400 kbps for higher quality but bigger filesize)
4. Leave everything else as default.
Audio:
128k AAC Stereo audio

Thanks for this. I've been using Freemake for quite sometime. Always works great.

Is this preset android video player ready? I'm all for software players like MX player or Mobo player on android, but I'm EXTREMELY curious why a standard mp4 file I d/l from the internet cannot be played by the default android (gallery / video??) player.
I want to know what the video spec the tegra2 can play at hardware level, maximum video dimensions, bit rate etc.... Anyone know?
veer01_42 said:
http://www.freemake.com/free_video_converter/?from=app
Extremely simple and easy to use Video converter handling almost any video format known to man.
It even has a built in android preset for making videos work with android devices.
---------------------------------------------------------------------------------------
For anyone who is curious, this is my custom general purpose android preset (Based of the 800x480 Android Preset)
Under the advanced config settings:
1. Framesize: Custom 720x400 (For 16x9 content) 640x480 (for 4x3 content)
2. Choose Video Codec as H.264
3. Custom bitrate as 700 kbps (or 1400 kbps for higher quality but bigger filesize)
4. Leave everything else as default.
Audio:
128k AAC Stereo audio
Click to expand...
Click to collapse

nexgenasian said:
I want to know what the video spec the tegra2 can play at hardware level, maximum video dimensions, bit rate etc.... Anyone know?
Click to expand...
Click to collapse
Max. 720p H.264 high-profile and 1080p baseline-profile do play with HW acceleration. There was some limit on bitrate, but it's so high that you shouldn't need to worry about that.

[Q] Video recording bitrate in motorola defy:problems

Hello,
I am running MIUI(2.4.13) on my motorola defy(green lens) with class2 8gb memory card.
the default bitrate for video recording is 2.1mb/sec which is lower than the bitrate of official android 2.2 which had 4.0mb/sec.(its really smooth at 24fps)
the thing is i tried changing the bitrate to 5.0 mb/sec through media_profiles.xml file.but when recording at 5.0 mb/s the video starts to jerk,
showing duplicate frames,stucks and, in whole the video is not smooth.
this happens after 30secs or 1minute of recording.the video is saved ok at 5.0 mb/s but its not smooth.
i saw in the media_profiles that the default bitrate for 720p rec is 10mb/s.
but when i change the video recording to 5.0mb/s at VGA its jerks
Why is that? is it beacuse of the low speed memory card?
or is it the processing power/buffer size.
i read as some guy getting vga recording to work fine at 8mb/s sec,but i can't.
video recording at 2mb/s bitrate sucks
Any help will be greatly appreciated
Thanks

I need input about converting movies for the Nexus 4.

With so little internal memory on the N4, I want to convert my mkv files to mp4.
I've been using mx player with a special codec to watch my mkv files but most are over 8gb and I only have 10gb free.
I want to know the best possible conversion in terms of high bitrate for video/audio, proper resolution, with no wasted file size.
I use mkvmergeGUI to remove unwanted subtitles and audio files and format factory for converting.
I'll give an example of a file I want to convert with relevant info. Please tell me how you would do the conversion.
Format - Matroska
Files size - 7.30 GB
Overall bitrate - 8 210 Kbps
Video format - AVC
Video bitrate - 7 761 Kbps
Width - 1920
Height - 816
Display aspect ratio - 2.35:1
Frame Rate - 23.976 fps
Bit depth - 8 bits
Scan type - Progressive
Audio format - AC-3
Bit rate - 448 Kbps
Sampling rate - 48.0 KHz
Channels - 6 channels

dgault73 said:
With so little internal memory on the N4, I want to convert my mkv files to mp4.
I've been using mx player with a special codec to watch my mkv files but most are over 8gb and I only have 10gb free.
I want to know the best possible conversion in terms of high bitrate for video/audio, proper resolution, with no wasted file size.
I use mkvmergeGUI to remove unwanted subtitles and audio files and format factory for converting.
I'll give an example of a file I want to convert with relevant info. Please tell me how you would do the conversion.
Format - Matroska
Files size - 7.30 GB
Overall bitrate - 8 210 Kbps
Video format - AVC
Video bitrate - 7 761 Kbps
Width - 1920
Height - 816
Display aspect ratio - 2.35:1
Frame Rate - 23.976 fps
Bit depth - 8 bits
Scan type - Progressive
Audio format - AC-3
Bit rate - 448 Kbps
Sampling rate - 48.0 KHz
Channels - 6 channels
Click to expand...
Click to collapse
video bitrate is quite high so lowercit down to about 4000-5000 it will decrease size about 2 gb and better use any video converter it is faster than format factory and is very easy to use. lower the bitrate lower is your size but dont bring down bitrate down too low or video will blur. 1000 a time will do and in mp4 option select 2-pass for better quality.
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
also use x264 as video codec

amit34521 said:
video bitrate is quite high so lowercit down to about 4000-5000 it will decrease size about 2 gb and better use any video converter it is faster than format factory and is very easy to use. lower the bitrate lower is your size but dont bring down bitrate down too low or video will blur. 1000 a time will do and in mp4 option select 2-pass for better quality.
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
also use x264 as video codec
Click to expand...
Click to collapse
Thanks.
I've read that videos at 1920x1080 should be converted using a percentage of the input file or the black bars get hard coded.

1) If you don't have it, download Handbrake (best video converter on the planet): http://handbrake.fr/downloads.php
2) Use it to open your source MKV.
3) Click on the "Toggle Presets" so that the presets area shows.
4) Expand the "Devices" area of the Preset List
5) Click on "Android High"
6) Set the destination to where you want to the mp4 to save
7) Press start
DONE.

lannister80 said:
1) If you don't have it, download Handbrake (best video converter on the planet): http://handbrake.fr/downloads.php
2) Use it to open your source MKV.
3) Click on the "Toggle Presets" so that the presets area shows.
4) Expand the "Devices" area of the Preset List
5) Click on "Android High"
6) Set the destination to where you want to the mp4 to save
7) Press start
DONE.
Click to expand...
Click to collapse
If you decide to try experimenting for best quality/file size......
3000kbps is good for excellent video quality (if you have a quality source file) and decent file size.