i got a blue screen on my huawei u8800 when i turn on the phone. if i connect to the computer it says only one disk witch is 235 mb. what can i do to fix it? i have tried several things but nothing works. i can't sent it in either because the phone was rooted before so my warranty is not more possible to use says the company where i bought the phone.
I have same problem wth your problem.
My screen blue after change boot and image file,but after release batery n restart again it's ok and cwm change with new one.
If yours not work,i suggest you chanfe image n boot file with previous one.
Hopely it's can help you...
Sent from my U8800Pro using xda premium
i have tried to put boot.img into to folder(235 mb) witch shows when i connect my phone to my computer. have also tried to copy the kerneø and boot files to a micro sd card but that doesn't work either.
don't copying boot n image fike to sd card,you should make pink screen condition of your x5.
just shut down your x5 then press vol up + vol down + power button in the same time,wait untill x5 screen change to pink,than you can copy image n boot file there.
finished copying, release your batery than turn on x5 normaly,it work in my x5.
hope this can help...
Sent from my U8800Pro using xda premium
Related
Hi,
I believe i bricked my brand new, just-out-of-the-box U8800 Pro. I will write the exact steps i did (in other words i will write what you SHOULD'T do!):
1. i entered the pink screen and copied the official recovery.img (5.0.2.6). then i tried to enter the recovery menu but it didn't work. it just showed a blue screen and that's it.
2. then i copied the unofficial recovery version (5.0.2.3) and it worked. i made a backup and flashed cm7 using the recovery. i did not reboot and wiped data. after that i rebooted the phone but it did not boot. it was just showing the huawei logo.
3. then i wiped everything again and rebooted. when i entered the pink screen mode there was no image folder nor any files. i could't access the recovery. i searched the forum for a solution and found links to 4 files (amss.mbn, boot.img, EMMCBOOT.MBN, recovery.img). i copied them to the phone but still couldn't enter the recovery.
4. on that same thread i found something about flashing U8800V100R001C00B138SP04CUSTESTC205D001(Esthonia Elisa). i copied the /dload/UPDATE.APP and UPDATE_CUST.APP files to my sd card. then flashed them by pressing VOL+ VOL- & POWER buttons at the same time. everything was looking nice... it said unpacking.. then installing.. and right after it said COMPLETE the phone restarted and since then it is showing just a black screen.
5. when i pull out the battery and insert it back the phone just vibrates but the screen doesn't even blink or something. it's like completely dead.
in sd card i found sd_update.log file:
"notesdld_file_ptr != -1) ! update.app have updated! start cust update ! SD download finished!"
if anyone has any thoughts, suggestions or info i would be very greatfull. thank you.
the rom B138 (Esthonia Elisa) is meant for U8800, not ur U8800Pro..
you finaly bricked your phone by flashing ROM from different model. now only service center can help you.
Sent from my ragelis
bronxitas said:
you finaly bricked your phone by flashing ROM from different model. now only service center can help you.
Sent from my ragelis
Click to expand...
Click to collapse
X2, so sorry dude
Sent from my U8800Pro using xda premium
iamelton said:
the rom B138 (Esthonia Elisa) is meant for U8800, not ur U8800Pro..
Click to expand...
Click to collapse
huawei made a really stupid thing by allowing flashing roms without any checks. and i made a really stupid thing by not noticing the pro at the end of the model oh well thanks
EdisDee said:
huawei made a really stupid thing by allowing flashing roms without any checks. and i made a really stupid thing by not noticing the pro at the end of the model oh well thanks
Click to expand...
Click to collapse
That goes for 5.0.2.6 recovery too (it's u8800 only). And I believe you did the same thing with CM7 for U8800, not Pro
My phone is not working too but I bricked it in the differrent way
hi, can someone help.
I've tried to install update 2.3.5 for u8800pro (second one with bug fixes) to my u8800pro, but i did something wrong. Now the phone didn't work.
1. I've copied step1 file to SDcard. that's it.
I,ve got to menu-stetings-sdcard-upgrade from sdcard.
upgrade started, then phone rebooted, but touchscreen is not reacting, also senso buttons. also it says that there is no sim card but it is in the phone.
I have no image of old system.
I think that what i did wrong that I copied only Step 1 file in Dload folder of SDcard (in upgrade there were also Step 2 and Step 3 files, but i didnt put them in SDcard Dload folder)
2. Then i've downloaded original Stock rom for u8800pro. Via computer i deleted from SDcard dload folder and then created new dload folder and copied stock rom (2 files).
Took off batery for 5 min., then pushed vol +, vol- and pwr buttones.
Got screen android system recovery (3e) with 4 options.
but i canot do anything from that point. I can't choose from theese options (buttons are not working), vol- or vol+, or pwr button not reacting.
maybe someone knows how to recover my phone to original stock or make something else to work phone?
Hi there, did you managed to recover your phone?
I have the same problem with my U8800PRO after attempt to upgrade to Gingerbread.
mmm200 said:
hi, can someone help.
I've tried to install update 2.3.5 for u8800pro (second one with bug fixes) to my u8800pro, but i did something wrong. Now the phone didn't work.
1. I've copied step1 file to SDcard. that's it.
I,ve got to menu-stetings-sdcard-upgrade from sdcard.
upgrade started, then phone rebooted, but touchscreen is not reacting, also senso buttons. also it says that there is no sim card but it is in the phone.
I have no image of old system.
I think that what i did wrong that I copied only Step 1 file in Dload folder of SDcard (in upgrade there were also Step 2 and Step 3 files, but i didnt put them in SDcard Dload folder)
2. Then i've downloaded original Stock rom for u8800pro. Via computer i deleted from SDcard dload folder and then created new dload folder and copied stock rom (2 files).
Took off batery for 5 min., then pushed vol +, vol- and pwr buttones.
Got screen android system recovery (3e) with 4 options.
but i canot do anything from that point. I can't choose from theese options (buttons are not working), vol- or vol+, or pwr button not reacting.
maybe someone knows how to recover my phone to original stock or make something else to work phone?
Click to expand...
Click to collapse
I use cm7 for a while and want to install aurora ics, copied dload file to sd card.
I turned on phone while holding +- and power button simultaniously.
Booted into pink screen but no update started.
I tried replacing boot and recovery image with original but makes no difference
Tutorial in aurora thread from cm7 to aurora doesn't work for me
Earlier i also installed miui once maybe this is the problem?
Can someone help?
Try putting the dload folder in internal memory or try to remove battery, plug USB cable and pressing volume keys and power before the phone boots...
Sent from my U8800
Also, if this is the fist time you're updating to .35, I recommend you use this version of stock
http://forum.xda-developers.com/showthread.php?t=1545923
That won't lock your bootloader, so you'll have USB access in pink mode at all times to easily install recovery images.
Sent from my U8800
Problem- no update in pink screen
I think i have a unlocked bootloader, i can access my recovery in pink screen at all times.
Currently i am using cm7:111128-cm-7.1.0-u8800-Geno-en
Clockworkmod 5.0.2.6
I tried to put dload file in sd card as well as in the internal memory
when i go into pink screen, nothing happens
Can someone help?
devior04 said:
I think i have a unlocked bootloader, i can access my recovery in pink screen at all times.
Currently i am using cm7:111128-cm-7.1.0-u8800-Geno-en
Clockworkmod 5.0.2.6
I tried to put dload file in sd card as well as in the internal memory
when i go into pink screen, nothing happens
Can someone help?
Click to expand...
Click to collapse
by "dload" file i think u meant the stock gb rom (B522, B526, B528, etc.), right?
if yes pls describe how u put file in the sd card with detailed directory structure..
also, change to cwm 5.5.0.4 to flash aurora rom..
pink screen- no update
I use this U8800 V100R001C00B136SP05CUSTC75D001(Portugal TMN) from in the aurora thread altough i don't speak portugese
If you know a usable english version?
I put it in /sdcard/dload?
devior04 said:
I use this U8800 V100R001C00B136SP05CUSTC75D001(Portugal TMN) from in the aurora thread altough i don't speak portugese
If you know a usable english version?
I put it in /sdcard/dload?
Click to expand...
Click to collapse
I recommend you use the one from the link I posted, because any other stock 2.3.5 ROM and you'll end up with a locked bootloader and, because of that, with no access to usb in pink mode. that would be reversible, but requires more unecessary work....
To start the upgrade process you must have the UPDATE.APP inside a dload folder in the root of sd card. Any other file structure and the upgrade process won't start.
It should look like this:
SdCARD/dload/Update.app.
Moved To Q&A
Please post all questions in the Q&A section
I had the same problem - no automatic update, only pink screen.
Then I tried another microSD-card and it worked.
Take off battery and connect to usb while pressing +-power buttons..that worked for me
Your phone goes to pink screen if sd-card doesn't contain only dload-folder.
Sent from my u8800-aurora-ICS using tapa 2-5
I got the same problem, when i press volym UP + volym DOWN + power i only get into pink screen and not the "upgrade" screen... I have tried to hold volym UP + volym DOWN and then connect the USB but didnt work, i have tested with two other SDcards but didnt work
Step1 worked perfectly and installed without problem but not step2.
Any solutions?
Hello.i have the u8800pro and i had the 2.3.5 512 version.
i tried to install the official ics from the huawei site.
and i did something wrong...
i've put in the dload folder only the first step UPDATE.APP .
i lost all personal data and the phone couldnt upgrade to the ics4.
i tried everything.
also tried to change recovery to 5027 and then i managed to brick it
when it starts normally it just shows the huawei logo forever
when it starts on recovery the same
when it starts with recovery 5027 it works but i cant access the sdcard for some reason...
when it starts in pinkscreen with sdcard loaded with the updates it starts the update progress but the bar never moves at all and stays there forever
when it starts with pinkscreen,i can enter the image folder and alter everything...
any ideas?
Use clean external sdcard, if you can enter recovery with 5207 try wiping.cache, dalvik cache, data, and formatting system. I know 5207 recovery is buggy, you cant access sdcard until restart.
Sent from my U8800 using xda premium
try do the upgrade without battery only using usb cable...
or if u have usb pluged and battery, start update then try to take off usb
i know htc evo x cant be upgrade to ics now i dont remember if it is with usb on or off... but a friend had that problem maybe u8800 pro has the same...
greetings...
I have a problem.
i flashed a rom that i dont remamber its name and my ideos x5 stoped working.
i turn the phone on, it apires logo and than it turns of.
i already tryed a lot of stock roms. 2.2.2 and 2.3.5 but when i run pink screen, it doesn't start installing... stays pink... even with out the battery.
it doesn't start recovery.
i tried to put the phone in charge but it doesn't apire the batery charging... does the logo loop.
i dont know what to do...
please help me.
Try to take off battery, and when phone is off connect the usb cable while you keep pushing the vol-/+ buttons. If doesn't start, then push(and keep pushing for a while) the power button, without to release the vol buttons.
Also make sure that you have put the update file in correct position on sd card.
You must make a folder with the name "dload" on the root directory of sd card and inside the update.app file.
i did every thing but it doesn't start installing the rom... it stays pink with and without the batery.
i toght that was the rom, but i downloaded all kind of stock roms but nun worked...
i dont know what to do more...
is there any way to access to the phone memory were are the rom files installed??
This is most probably means that your sd card doesn't detected, so loads the pink srceen mode instead of the update mode.
If you have pink screen unlocked(official froyo rom or 2.3 older version than B518 roms), then you can access some of the partitions from a linux pc. Then you can access internal storage and put the dload folder there.
im not realy familiarised with linux but i tried to atatch the phone on ubuntu with pink screen and it didnt apear nothing.
i think the rom that i used was 1 of this 2... i dont remember with one was. but i think it was the 1st.
U8800proB928GaDaNaV5_2 or 404029_4.0_BasebandCWM
Yep, that would do it. If you have a plain u8800 x5, those roms would have killed your phone good and proper. Most of those u8800 pro ICS roms flash bootloaders, amss and all kinds of things, not just system and boot.img. Unless you can get through the pinkscreen with a fresh SD card with the official B5XX update.app in a dload folder on it, you are looking at having to buy a new phone. Sorry man.
Try the official updates here: http://www.mediafire.com/#9adk7amyag95k
Start with b526 for gingerbread or b138 for froyo.
yessssss...
Thanks for every thing. specialy for the rom and specialy for the detail of the sd cards...
i tried with 3 diferent sd's and only one did the update... now the phone is funcional...
Thanks alot. i was desperating
Glad it got worked out man, nothing worse than seeing a phone stick and reboot.
Sent from my U8800 using xda premium
As the title says, i formatted everything (boot, image etc) and my Phone Huawei U8800 Pro goes in blue screen or Purple Screen when i try to enter the recovery menu. I used to have CWM Recovery 5.0.2.7 and used as stock Rom Gingerbread B512. Can you help me, guide me to bring back in life my phone. Thanks in advance for every help.
avpap said:
As the title says, i formatted everything (boot, image etc) and my Phone Huawei U8800 Pro goes in blue screen or Purple Screen when i try to enter the recovery menu. I used to have CWM Recovery 5.0.2.7 and used as stock Rom Gingerbread B512. Can you help me, guide me to bring back in life my phone. Thanks in advance for every help.
Click to expand...
Click to collapse
Flash official rom or someone can post his cust backup!
do not worry.
creates a dload of ver. B521 with inside the .apk file Update _ 374,402 app_ KB file and put it in the SD. Remove battery plug USB cable and hold down the Vol + and Vol-and power button at the same time. Will upload and eventually will do several restarts
Check to myPhone. I've send you my image folder.
Here you are...
Here is my image folder if you didn' t get it...
it's an executable compressed file
https://docs.google.com/open?id=0BylL_LbM_40RQjBkOGMzUDFpNW8
Thanks guys for the answers. everything is OK now. I Flashed with the Original 2.3.5. B522 and everything is OK now.
Blue screen Problem please help i hv tried all
baggino said:
do not worry.
creates a dload of ver. B521 with inside the .apk file Update _ 374,402 app_ KB file and put it in the SD. Remove battery plug USB cable and hold down the Vol + and Vol-and power button at the same time. Will upload and eventually will do several restarts
Click to expand...
Click to collapse
Dear aal i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
shahbaz9001 said:
Dear aal i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
Click to expand...
Click to collapse
re-install offical firmware
forumber2 said:
re-install offical firmware
Click to expand...
Click to collapse
Thanx dear, but how to install these firmwares, tell me the way.
i cannot access drive or directory of device when connect to pc....