i've used about 4 different roms and can not get wifi to work correctly on fresh roms with wipe.
they all allow the connection and give the phone an IP address but none let the phone to the internet.
has any one any suggestions?
txt3rob said:
i've used about 4 different roms and can not get wifi to work correctly on fresh roms with wipe.
they all allow the connection and give the phone an IP address but none let the phone to the internet.
has any one any suggestions?
Click to expand...
Click to collapse
well dude, before we say it's a hardware matter, have you tried to connect with different WIFI? office, home.... you tried ROMs, but afterall connection is about 2-way.
This is very weird. 4 ROMs!? I've had issues regarding wifi with Gsf. But,this should be some problem concerning your wifi router.Check the settings and try.
Hey,another thing,just check the MAC addresses in your wifi after your phone connects.
Sent from my Blade using XDA app
Did you restore any wifi passwords using titanium backup while switching between the roms?
long time ago, i have the same problem as you...
i was reinstalling a hundred time a new rom and everytime, i restore app and data from backup titanium... and wifi doesn't work...
There is a issue with blade on wifi n network..it actually connects to wifi g,b networks...we need wifi n drivers to connect to the usual wifi n
-------------------
@vijaykirann
Related
Ok, wifi connects sometimes, usually not for long. Ftp's will not work
What I've tried:
Reset router
Change connect encryptions
Different apps for ftp
Different programs for ftp
Reboot everything
Nothing seems to work
Any ideas?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Im not sure what all that mess is but what works for me is barnacle wifi tether. Just check the 'skip wpa supplicant' in settings and you're good to go.
Sent from my T-Mobile myTouch 3G Slide using XDA App
h4x0l2 said:
Ok, wifi connects sometimes, usually not for long. Ftp's will not work
What I've tried:
Reset router
Change connect encryptions
Different apps for ftp
Different programs for ftp
Reboot everything
Nothing seems to work
Any ideas?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
assuming you are talking about connecting to a Wi-Fi network... have you tried flashing one of the other CM 6 based ROMs to see if the problem persists? the basic CM 6 is the only one I haven't tried... I know the Wi-Fi works fine for me on both of the TeamFenix ROMs and has worked on all the PrOdigal_Sun ROMs I have tried both at the house and on the road.
easy fix turn on bluetooth with wifi and you can get net
I have have updated cm7 to 7.0.2 and my gps is now working well... but now i´m facing a new issue.
I use a coffe shop wireless connection to do many things to the phone. but now it cant find the signal from that connection.
Before the update, and in cm6.1 i could connect to the wireless, now it dont show up on the wireless connections screen.
can anyone help me in here?
ICavalera said:
I have have updated cm7 to 7.0.2 and my gps is now working well... but now i´m facing a new issue.
I use a coffe shop wireless connection to do many things to the phone. but now it cant find the signal from that connection.
Before the update, and in cm6.1 i could connect to the wireless, now it dont show up on the wireless connections screen.
can anyone help me in here?
Click to expand...
Click to collapse
I had the same problem. I think it's being caused by the wifi trying to autoconnect to a remembered AP in range. I just had my phone "Forget" the network I knew it was trying to connect to (my home network) and it worked.
santisolinho said:
I had the same problem. I think it's being caused by the wifi trying to autoconnect to a remembered AP in range. I just had my phone "Forget" the network I knew it was trying to connect to (my home network) and it worked.
Click to expand...
Click to collapse
but every one sees the wifi network and i dont see...
really i am almost to downgrade to cm6.1 were there i have no trouble to wif and gps.
Today i saw the network and try to connect and fail... and then i connect and in the middle of using ebuddy disappear. then could not connect anymore.
Hi,
Cm7 is quiet weak with wifi. Meaning the signal strentgh in cm7 is less like e.g. on b 0.8.4 maybe flashing another radio helps.
Sent from my Legend using XDA App
I flash another radio and didn't work. Clear data, cache and dalvik. Nothing. Só i give a trie on nightly #58. Did a clean install and it worked. Went to the coffee shop and detect the wifi and could connect with a good signal. Tomorrow i'm going to my brother's house where i had the same problem. Then i will report if it's ok or not.
Thanks.
Sent from my Legend using XDA App
I went to the coffee shop and again... i dont see the wifi. Yesterday worked... today cant find again. I love cm7, but like this is not very good. Well, im going to downgrade. I cant find any real solution.
Sent from my Legend using XDA App
have you tried changing channels on wifi settings-->advanced-->regulatory domain? just a shot though. it worked for me on the nightlies. on latest cm7 stable though, i haven't need to change it...
did you use any other wifi tool than the cm7 internal one? Wifi analyser or similar apps may watch out for more ssid than CM7 itself
maybe the wifi channel is out of range, meaning cannel 11 or higher. Then change the channel settings in android settings
alexkno said:
did you use any other wifi tool than the cm7 internal one? Wifi analyser or similar apps may watch out for more ssid than CM7 itself
maybe the wifi channel is out of range, meaning cannel 11 or higher. Then change the channel settings in android settings
Click to expand...
Click to collapse
thanks... im trying!
Thanks to the FAQ by antony.ps
antony.ps said:
8) Can't connect to my wireless network.
- Tap and hold the SSID of the network and select Forget
13) How can I make GPS work better (be more fast and precise)?
- Make a backup of your /etc/gps.conf (use a file manager to rename or copy to another place)
- Visit this thread
- Click in the link "XDA Members Click Here" at the final of the post, and search for the correct .zip for your country
- Copy the .zip to your SD Card and reboot in Bootmenu, then flash the zip via Custom Recovery
Click to expand...
Click to collapse
For me, Wifi and GPS don't seem to be giving problems. But again, thanks for bringing in the useful information.
not working in Brazil with Cm7 rom ported from defy
On my UK 2.2.2 android there is no /system/etc/gps.conf file. Maybe this GPS fix is only for HTC phones.
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
sahilarora911 said:
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
Click to expand...
Click to collapse
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
dangpzanco said:
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
sahilarora911 said:
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
Click to expand...
Click to collapse
=D Don't worry.
This port not working on my MS2...
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
skaburn said:
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
Click to expand...
Click to collapse
Are you using the latest version of the Rom?
Did you flash a Froyo and/or a GB SBF?
Sent from my Milestone 2 XDA App
Wifi problems with 802.11 N + PEAP Authentication
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
jsschmid said:
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
Click to expand...
Click to collapse
Probably you can try switching off the N network from your phone. Force it to connect through G.
This post might help you.
http://forum.xda-developers.com/showpost.php?p=9467118&postcount=4
It basically disables n network from Milestone 2
You can give it a shot.
I delete all my wifi connections, reboot the cell and work all good..
Enviado desde mi MotoA953 usando Tapatalk
Good for me
Neuralsystem said:
not working in Brazil with Cm7 rom ported from defy
Click to expand...
Click to collapse
Seemed to work for me. Im with CM7 too.
Download and installed South America.zip
Thanks a lot for the post
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
I know it is not here but my phone is locked in airplane mode!
Anonymous_ said:
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
Click to expand...
Click to collapse
It always happens to me on my uncle's house. His wifi is WPA2 and has such a BIG password, but when I try to connect the phone acts as if nothing happened...
I think it's a global problem with Milestone 2, because it didn't work in any Rom, Froyo/CM7/GB/MIUI.
Sent from my Milestone 2 XDA App
MasterTB said:
I know it is not here but my phone is locked in airplane mode!
Click to expand...
Click to collapse
Reboot, disable airplane mode, than reboot again.
Sent from my Milestone 2 XDA App
in my MS2, wifi will connect and disconnect again and again, even if forgeting my wireless node
Hi there!
Im on Froyobread v023b by dx. The thing is that the wifi connection (to wireless routers) isnt working quite well. It works okay at my home, but when i want to connect on a caffe wifi area, or at my school, i cant.
At my school, under the name of the connection it says "protected with WPA/WPA2 PSK" I dont know if it changes anything, but well.
Its always the same, i connect to the router, put the password, wait, and it keeps saying disconnected, or out of range even when i am on the range of the router.
Any help?
Goodbye!
I'm having the same problem with gingerDX. I use WEP security in my house and it works ok. But can't connect to any other wifi protected with WPA/WPA2 PSK =/
Try a full wipe
Sent from my X8 using XDA App
I already did a full wipe but it didnt change. It happened the same when i was with gingerdx.
And it seems to be the connections with WPA/WPA2 PSK
Goodbye!
It's a problem with configuration and compatibility. Different routers/ap's use different configurations, and configurations can have different settings.
I can only connect to my router with modded roms if i disable N draft on it or it gets on a "connecting loop". Does it mean the phone cannot connect with N routers? No.. I have no probs with my girlfriend router and it has N enabled.
You seem to have problems using WPA.. I use it also use WPA and have no probs.
The modded wifi libs must have an incompatibility with some settings.
Some routers allow you to tweak them alot, maybe changing some values can do the trick, or even changing the WPA encryption type..
Sent from my E15i using XDA App
Nikkopt said:
It's a problem with configuration and compatibility. Different routers/ap's use different configurations, and configurations can have different settings.
I can only connect to my router with modded roms if i disable N draft on it or it gets on a "connecting loop". Does it mean the phone cannot connect with N routers? No.. I have no probs with my girlfriend router and it has N enabled.
You seem to have problems using WPA.. I use it also use WPA and have no probs.
The modded wifi libs must have an incompatibility with some settings.
Some routers allow you to tweak them alot, maybe changing some values can do the trick, or even changing the WPA encryption type..
Sent from my E15i using XDA App
Click to expand...
Click to collapse
Is it possible to change the wifi libs of a custom rom for another one "more stable"?
Goodbye!
Lobialkon said:
Is it possible to change the wifi libs of a custom rom for another one "more stable"?
Goodbye!
Click to expand...
Click to collapse
DX already tried different libs but they all work incorrectly in some cases
My university uses 802.1x EAP with mschapv2 authentication. I don't have a problem if I go back to the stock eclair rom on my x8, but with froyobread and ginger dx, i get occasional connections, followed by drops, and then the scanning-connecting-disconnecting problem. Usually, I have to forget and re-enter the network details to connect. With Ginger DX v12, I can't connect at all.
i updated to DX v12 and connected today to my univ. wifi with no problem. i wasn't able to connect with the earlier version.
Sent from my X8 using XDA App
v2milk said:
i updated to DX v12 and connected today to my univ. wifi with no problem. i wasn't able to connect with the earlier version.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I updated today to gdx v012 and it connected in "some" places with WPA/WPA2 PSK, not all of them (my school for example).
It just keeps saying disconnected, searching, connecting to, disconnected, and so on.
Goodbye!
best for wifi?
Are there any custom roms for the x8 that work well in general and also don't have wifi problems?
I think "protected with WPA/WPA2 PSK"is the problem, my phone can't connect to this kind of net work, WEP and OPEND is Ok.
i can conect to any router with any security but... in gingerbread it auto disconect after 2min
Has anyone got Mobile Hotspot to work on their MS2 after the upgrade to Gingerbread?
I've been having problems - Tte MS2 properly assigns an IP address to PCs that try to connect to it over WiFi, but the connection doesn't seem to go past my MS2 to the Internet. Same thing whether USB or WiFi.
I'm on T-mobile on the USA - could that have something to do with it, some kind of authentication is being performed now (that wasn't being performed on Froyo?)
I had this problem too.
Now I use the app "barnacle wifi tether" and it works fine.
I'm from Brazil...
Sent from my MotoA953 using XDA App
Thanks for the suggestion. If I root my phone I'll consider that option. Has anyone found any other fixes? I tried playing with the APN settings as suggested by some online, but it doesn't seem to help.
beestar said:
Has anyone got Mobile Hotspot to work on their MS2 after the upgrade to Gingerbread?
Click to expand...
Click to collapse
Usb sharing is f*d up - dnsmasq does not launches properly and phone gives no IP in response to dhcp req from pc. I don't remember, if setting an IP and gw manually solves the problem.
However launching _both_ sharing method at once helped. DHCP worked fine. Maybe launching wifi hotspot alone generates similar problem?
Did a factory reset and now Mobile Hotspot works!
Haven't tried USB tethering yet, will report back when I do.
Great! I also had this problem and this tip helped me.
Mobile Hotspot works but haven't got USB tethering to work properly yet. The computer can get an IP address from the phone, but no connection through to the Internet. This is after the factory reset.
Same with me here.. Already did FR but still no go..
Old thread I know but anyone sorted this yet, as its doing my head in, I even changed to a tethering plan in case i was being blocked.
Barnacle Tether doesn't work either same symptoms also says DHCP:Could not bind to DHCP port Address already in use
Use PDA Net, it's available in the Play Store
Caesarivs said:
Use PDA Net, it's available in the Play Store
Click to expand...
Click to collapse
Thanks Caesarivs I have tried that as well, just says obtaining ip address and then disconnects and says remembered
commanderaj said:
Thanks Caesarivs I have tried that as well, just says obtaining ip address and then disconnects and says remembered
Click to expand...
Click to collapse
Could it be your carrier blocking 3G tethering?
Hi
3G tethering is not blocked by carrier as I am on a tethering plan and have spent a long time on the phone to an Indian call centre to sort it.
But joy of joys after trying everything I could think of including re-flashing and wiping all data etc. I have managed to get it working using wifi tether for root user
Result